Separation and size characterization of highly polydisperse titanium dioxide nanoparticles (E171) in powdered beverages by using Asymmetric Flow Field-Flow Fractionation hyphenated with Multi-Angle Light Scattering and Inductively Coupled Plasma Mass Spectrometry

Food-grade titanium dioxide (E171) and zinc oxide nanoparticles induce mitochondrial permeability and cardiac damage after oral exposure in rats

Food-grade titanium dioxide (E171) and zinc oxide nanoparticles (ZnO NPs) are found in diverse products for human use. E171 is used as whitening agent in food and cosmetics, and ZnO NPs in food packaging. Their potential multi-organ toxicity has raised concerns on their safety. Since mitochondrial dysfunction is a key aspect of cardio-pathologies, here, we evaluate the effect of chronic exposure to E171 and ZnO NPs in rats on cardiac mitochondria. Changes in cardiac electrophysiology and body weight were measured. E171 reduced body weight more than 10% after 5 weeks. Both E171 and ZnO NPs increased systolic blood pressure (SBP) from 110-120 to 120-140 mmHg after 45 days of treatment. Both NPs altered the mitochondrial permeability transition pore (mPTP), reducing calcium requirement for permeability by 60% and 93% in E171- and ZnO NPs-exposed rats, respectively. Treatments also affected conformational state of adenine nucleotide translocase (ANT). E171 reduced the binding of EMA to Cys 159 in 30% and ZnO NPs in 57%. Mitochondrial aconitase activity was reduced by roughly 50% with both NPs, indicating oxidative stress. Transmission electron microscopy (TEM) revealed changes in mitochondrial morphology including sarcomere discontinuity, edema, and hypertrophy in rats exposed to both NPs. In conclusion, chronic oral exposure to NPs induces functional and morphological damage in cardiac mitochondria, with ZnO NPs being more toxic than E171, possibly due to their dissociation in free Zn2+ ion form. Therefore, chronic intake of these food additives could increase risk of cardiovascular disease.

Determination and Characterization of Gold Nanoparticles in Liquor Using Asymmetric Flow Field-Flow Fractionation Hyphenated with Inductively Coupled Plasma Mass Spectrometry

The EU has approved the usage of gold as a food additive (E175) and it has been applied in numerous foods for coloring and decoration purposes. Different from the general assumption that edible gold is mainly present in the form of flakes or external coating in foods, this work demonstrated that gold nanoparticles (Au NPs) can be released from gold flakes and extracted under optimized conditions. To support future risk assessment associated with the exposure of Au NPs to human health, an effective approach was established in this study for both size characterization and mass determination of Au NPs released in a commercial gold-containing liquor using Asymmetric Flow Field-flow Fractionation (AF4) hyphenated with Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Our results showed that no Au NPs were detected in the original liquor product and only after ultrasonication for several minutes did Au NPs occur in the ultrasound-treated liquor. Particularly, Au NPs released in the liquor can be well extracted after 100-fold enrichment of gold flakes and the subsequent ultrasonication for 25 min. Size characterization of Au NPs was conducted by AF4-ICP-MS under calibration with Au NP standards. The gold particle sizes detected ranged from 8.3-398.0 nm and the dominant size of the released Au NPs was around 123.7 nm in the processed liquor. The mass concentration of gold particles determined in the liquor sample with gold flakes concentrated and subsequently sonicated was 48.1 μg L-1 by pre-channel calibration and the overall detection recoveries ranged over 82-95%. For the comparison control samples without ultrasonication, there was no detection of Au NPs. The established method was demonstrated to be useful for monitoring Au NPs in liquor and is possibly applied to other similar foodstuffs.

Electrical asymmetric-flow field-flow fractionation with a multi-detector array platform for the characterization of metallic nanoparticles with different coatings

Electrical asymmetric-flow field-flow fractionation (EAF4) is a new and interesting analytical technique recently proposed for the characterization of metallic nanoparticles (NPs). It has the potential to simultaneously provide relevant information about size and electrical parameters, such as electrophoretic mobility (μ) and zeta-potential (ζ), of individual NP populations in an online instrumental setup with an array of detectors. However, several chemical and instrumental conditions involved in this technique are definitely influential, and only few applications have been proposed until now. In the present work, an EAF4 system has been used with different detectors, ultraviolet-visible (UV-vis), multi-angle light scattering (MALS), and inductively coupled plasma with triple quadrupole mass spectrometry (ICP-TQ-MS) for the characterization of gold, silver, and platinum NPs with both citrate and phosphate coatings. The behavior of NPs has been studied in terms of retention time and signal intensity under both positive and negative current with results depending on the coating. Carrier composition, particularly ionic strength, was found to be critical to achieve satisfactory recoveries and a reliable measurement of electrical parameters. Dynamic light scattering (DLS) has been used as a comparative technique for these parameters. The NovaChem surfactant mix (0.01%) showed a quantitative recovery (93 ± 1%) of the membrane, but the carrier had to be modified by increasing the ionic strength with 200 μM of Na₂CO₃ to achieve consistent μ values. However, ζ was one order of magnitude lower in EAF4-UV-vis-MALS than in DLS, probably due to different electric processes in the channel. From a practical point of view, EAF4 technique is still in its infancy and further studies are necessary for a robust implementation in the characterization of NPs.

Titanium Dioxide: Structure, Impact, and Toxicity

Titanium dioxide, first manufactured a century ago, is significant in industry due to its chemical inertness, low cost, and availability. The white mineral has a wide range of applications in photocatalysis, in the pharmaceutical industry, and in food processing sectors. Its practical uses stem from its dual feature to act as both a semiconductor and light scatterer. Optical performance is therefore of relevance in understanding how titanium dioxide impacts these industries. Recent breakthroughs are summarised herein, focusing on whether restructuring the surface properties of titanium dioxide either enhances or inhibits its reactivity, depending on the required application. Its recent exposure as a potential carcinogen to humans has been linked to controversies around titanium dioxide's toxicity; this is discussed by illustrating discrepancies between experimental protocols of toxicity assays and their results. In all, it is important to review the latest achievements in fast-growing industries where titanium dioxide prevails, while keeping in mind insights into its disputed toxicity.

Polyethylenimine/cGAMP Nanocomplexes for STING-Mediated Cancer Immunotherapy: Formulation and Characterization Using Orthogonal Techniques

Cyclic GMP-AMP (cGAMP) has lately been extensively investigated in cancer immunotherapy due its activation of the innate immunity stimulation of interferon genes (STING) pathway within antigen presenting cells (APC) leading to an increase in tumor specific CD8+ T cells. As negatively charged dinucleotides are prone to enzymatic degradation before being taken up by APC, there is a need for an appropriate carrier. Therefore, polyethylenimine (PEI), a gold standard for oligonucleotide delivery, was selected. Molecular weight, type of PEI and N/P ratio between PEI/cGAMP were investigated in terms of toxicity, efficacy and physicochemical properties of the nanocomplexes (NCs) such as size, zeta potential and shape. Due to lack of nano-medicine regulations and the need for a case-by case assessment, here we examine these parameters by several orthogonal methods, such as dynamic light scattering (DLS), nanoparticle tracking analysis (NTA) and online asymmetric flow field flow fractionation (AF4) connected to DLS. N/P ratio of 2/1 ratio using linear PEI 25 kDa resulted in larger, positively charged particles of elongated shape, which were shown to have the best toxicity/efficacy ratio among different PEIs and ratios tested.

Monitoring the Cd2+ release from Cd-containing quantum dots in simulated body fluids by size exclusion chromatography coupled with ICP-MS

Quantification of Cd²⁺ release from Cd-containing quantum dots (QDs) is of fundamental importance to elucidate its toxicity to organisms, but remains a great challenge due to the lack of appropriate analytical method. Herein, a facile method based on size exclusion chromatography (SEC) combined with inductively coupled plasma mass spectrometry (ICP-MS) was developed for separating and quantifying the QDs and counterpart ions. By using the mixture of sodium dodecyl sulfate (SDS) and ethylenediaminetetraacetic acid tetrasodium salt (EDTA) as the mobile phase, the defect of QD and ion adsorption onto the SEC column was overcome, thus realizing the accurate quantification of ionic species. Besides, the concentration of QDs was achieved through subtracting the ion concentration from the total concentration. Selecting CdSe@ZnS as the typical QDs, the Cd²⁺ release process in four typical simulated body fluids, namely, simulated gastric fluid, simulated sweat, Gamble's solution, and artificial lysosomal fluid, was monitored using the developed SEC-ICP-MS method. The media pH is identified as the decisive factor which controls the dissolution of ZnS shells and also the Cd²⁺ release kinetics and final concentration. Our results suggest that the oral pathway for QD uptake poses the biggest risk to human health.