Implementation of analytical quality by design and green chemistry principles to develop a ultra-high performance liquid chromatography method for the determination of Fluocinolone Acetonide impurities from its drug substance and topical oil formulations

Deep eutectic solvents as a green alternative to organic solvents for β-cyclodextrin pseudo-stationary phase in capillary electrophoresis

β-cyclodextrin (β-CD), as an important pseudo-stationary phase (PSP) in capillary electrophoresis (CE), frequently confronts challenges stemming from its limited water solubility, particularly when high concentrations are required for resolving complex analytes. Traditionally, researchers often resort to the use of (toxic) organic solvents to enhance the solubility of β-CD, establishing non-aqueous capillary electrophoresis (NACE) for specific separations. However, such practices are hazardous to health and run counter to the principles of green analytical chemistry. In this study, we demonstrate a deep eutectic solvent (DES), Proline:Urea (PU), as a promising alternative to conventional organic solvents for β-CD-based CE separations. The DES exhibits a solubility of up to 30% for β-CD, a significant improvement compared to the 1.8% solubility in the aqueous phase. Utilizing this DES-type separation medium, we achieved simultaneous baseline separation of a complex analyte composed of eight structurally similar naphthoic acid derivatives. Furthermore, we conducted a systematic comparison of β-CD's performance in aqueous CE buffers, organic solvents, and DESs, highlighting the superiority of this novel and environmentally friendly CE separation medium.

QbD green analytical procedure for the quantification of tolvaptan by utilizing stability indicating UHPLC method

For the first time a new QbD-assisted green stability indicating ultra-high-performance liquid chromatography (UHPLC) method was developed and validated for quantifying Tolvaptan. The method is simple, quick, cost-effective, and stable, and it was used to formulate a quality target product profile (QTPP) with strategically defined critical analytical attributes (CAAs) to meet specific criteria. Chromatographic separation was undertaken using a 10 cm long column of ACE excel super C18 with an interior diameter of 2.1 mm and particle size of 1.7 µm. The analysis was performed under controlled conditions at 25 ℃ with the mobile phase flowing at a rate of 0.2 mL/min and detection occurring at 220 nm. Injected 3 µL of standard by using an isocratic mobile phase system consisting of acetonitrile and water in a 95:5 v/v ratio. The diluents, prepared by mixing acetonitrile with water at a 90:10 volumetric ratio, were utilized. The analyte's retention time was determined to be 1.63 min. The developed method provided reliable results with accuracy exceeding 99% and a correlation coefficient exceeding 0.999 ranged between 10 and 150 µg/mL across the range for LOQ-150% levels. Notably, during forced degradation testing, Tolvaptan exhibited susceptibility to acidic hydrolysis. The method effectively separated degradation products during stress testing, demonstrating its stability-indicating status. Environmental sustainability assessment of the developed method was conducted through the investigation of various indicators of Complex GAPI, Analytical Eco scale and Analytical GREEness and it was concluded the optimized method aligns with environmentally friendly practices.

Green application of surfactant modified silica as effective sorbent for extraction and preconcentration of sulfonamide residues in environmental water and honey samples

Micro-solid phase extraction (µ-SPE) using surfactant coated silica for extraction and preconcentration of sulfonamide residues at trace levels in environmental water and honey samples prior their analysis by high performance liquid chronatography coupled with photodiode array detector (HPLC-PDA). The sample solution were dispersed in a small amounts of solid sorbent by vacuum manifold for sample preparation, and extraction occurred by adsorption in a short time. Finally, the analytes were subsequently desorbed using an appropriate solvent. The pure and coated silica were physicochemically and morphologically characterized by nittrogen (N2) sorptions analyses, and transmission electron microscopy (TEM). Parameters influencing extraction efficiency, such as amount of sorbent, kind, concentration and volume of surfactant, and kind and volume of desorption solvent, were investigated. The optimum conditions of the proposed method, were mixed standard/sample solution (10 mL), 0.4 g silica, 0.03 M CTAB (150 µL), and 500 μL methanol (as elution solvent). The proposed method, under optimal conditions, showed excellent linearity in different ranges (9-300 μg L-1, the a coefficient of determination (R2) of greater than 0.99), good repeatability (RSD < 6.72 %), good sensitivity (LODs in the range of 1 to 3 µg L-1), high enrichment factor (5.63-13.33), and acceptable relative recoveries (61.0-121.4 %). The developed µ-SPE method was applied to analyze sulfonamide residues in water and honey samples with relative recoveries of 60.9-119.4 % were obtained. This alternative method is simple and is also environmentally friendly which assessed using Analytical Eco-scale and Analytical GREEnness metric (AGREE).

Stability indicating reversed-phase-high-performance liquid chromatography method development and validation for pyridostigmine bromide and sodium benzoate in oral solution

The present study focuses on the development of a simple, rapid, specific, and stability-indicating HPLC method for the simultaneous analysis of pyridostigmine bromide (PGB) and sodium benzoate (SBN) in oral liquid dosage forms. Analytical techniques should enhance sensitivity and specificity for the estimation of pharmaceutical drug products. Stress studies were conducted under various International Conference on Harmonization (ICH) conditions for evaluation. The further optimized HPLC method was validated in accordance with the current ICH guidelines. Chromatographic separation was accomplished using a mobile phase consisting of a 950:50 v/v ratio of perchloric acid buffer and acetonitrile as mobile phase-A, and 100% acetonitrile as mobile phase-B. The flow rate is 1.0 mL/min, and the injection volume is 20 μL. Detection of components was carried out at 220 nm for PGB and 228 nm for SBN. The validated HPLC method demonstrated high specificity, with linearity ranging between 24 and 72 μg/mL for PGB and 5.2-15.6 μg/mL for SBN. The correlation coefficient for both drugs exceeded 0.999. The method demonstrated high accuracy, exceeding 97%. In stress studies, PGB was found to be sensitive to alkaline stress conditions. The results reveal the successful applicability of the current method for the estimation of PGB and SBN in its marketed formulation, which can be reasonably inferred to assess other formulation systems.

Separation and simultaneous estimation of enantiomers and Diastereomers of muscarinic receptor antagonist Solifenacin using stability-indicating Normal-phase HPLC technique with chiral stationary phase amylose tris-(3,5-dimethylphenylcarbamate)

The R,S-enantiomer impurity and diastereomer impurities (S,S-isomer and R,R-isomer) of the solifenacin (S,R-enantiomer) were effectively separated and quantified simultaneously utilizing normal-phase high-performance liquid chromatography with a chiral stationary phase consisting of amylose tris (3,5-dimethylphenylcarbamate) coated on silica-gel (Chiralpak, AD-H). The enantiomeric and stereo-selective separation was achieved within a run time of 35 minutes using a mobile phase of 'n-hexane, ethanol, and diethylamine' in an isocratic elution mode with a detection wavelength of 220 nm. The validation attributes assessed were accuracy (which showed excellent recoveries between 97.5% and 100.4%) and linearity (which was proven in the range of 0.081-1.275 μg.mL-1 , with a linear regression of 0.999). The stress testing experiments proved that the developed methodology by the HPLC technique has stability-indicating characteristics, as all closely eluting peak pairs were separated well with a resolution of 2.3 and without any interference. The proposed methodology was highly efficient in separating and simultaneously determining the chiral impurities (enantiomers and diastereomers) of the solifenacin in the release and stability sample analyses of drug substances and tablets in pharmaceutical formulations.

A quality-by-design evaluated liquid chromatography method development and validation for the separation and quantification of nitroxoline and its impurities

A novel, isocratic, sensitive, stability-indicating high-performance liquid chromatography method was developed for the separation and quantification of related substances in nitroxoline (NTL). The chromatographic separation has been achieved on Inertsil ODS-3 V, (250 × 4.6 mm, 5 μm) at 240 nm using ethylenediamine tetraacetic acid buffer and methanol in the ratio of 60:40 v/v as mobile phase. The performance of the method has been checked as per the International Conference on Harmonization guidelines for specificity, linearity, accuracy, precision, and robustness. Regression analysis showed a correlation coefficient value greater than 0.99 for NTL and its three impurities. The detection limit of impurities was in the range of 0.01% (0.05 μg/mL)-0.22% (1.1 μg/mL) indicating the sensitivity of the newly developed method. The accuracy of the method was established based on the recovery obtained between 94.7% and 104.1% for all the impurities. The percentage relative standard deviation obtained for the repeatability was less than 4.0% at the specification level for all impurities. Forced degradation was performed to establish the stability-indicating nature of the method and to know about the degradation products, the quality of a drug substance changes with time under the influence of stress conditions. Thus, the proposed method was validated and found to be specific, sensitive, linear, accurate, precise, reproducible, and beneficial for routine usage.

A sensitive ultra-performance liquid chromatography-tandem mass spectrometry method for the simultaneous quantification of assay and trace-level genotoxic tosylate analogs (methyl and ethyl) in empagliflozin and its tablet dosage forms

This study performed the simultaneous quantification of assay and two alkyl sulfonate (tosylate) analogs of empagliflozin (EGZ), specifically methyl 4-methyl benzene sulfonate (MMBS) and ethyl 4-methyl benzene sulfonate (EMBS) in EGZ, and its finished dosage form using an accurate and sensitive ultra-performance liquid chromatography-mass spectrometry method. The separation was achieved on a Waters Acquity BEH Shield RP18 (100 × 2.1 mm, 1.7 μm) column in gradient elution mode with 0.1% formic acid and acetonitrile as the mobile phases and a flow rate of 0.5 mL/min. For simultaneous quantification, the multiple reaction monitoring technique was utilized. The procedure was successfully validated in accordance with the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines. The peak areas of both impurities, along with their concentrations, exhibited a good relationship with Pearson's correlation coefficient (R), which was >0.999 in the range of 0.3-6 ppm with an EGZ concentration of 2 mg/mL. The percentage recoveries from the limit of quantitation (LOQ) to 200% to the specification level were in the range of 94.82%-102.92%, whereas the percentage relative standard deviation (%RSD) was <2. Therefore, this method is rapid and accurate to quantify MMBS, EMBS, and EGZ assay simultaneously from the marketed tablet dosage forms of EGZ for commercial release and stability sample testing.

An integrated framework to develop an efficient valid green (EVG) HPLC method for the assessment of antimicrobial pollutants with potential threats to human health in aquatic systems

The persistence of antimicrobial drugs in aquatic environments has raised critical concerns about their possible impact on drinkable water quality and human health. The Nile River is experiencing water pollution owing to increasing discharges of highly contaminated home and industrial effluents and inadequate water management systems. Investigations of the presence of three antimicrobial agents, ciprofloxacin (CIP), sulfamethoxazole (SMZ), and albendazole (ALB), in the Egyptian aquatic system are recommended using a chromatographic method because of their reported existence in the African aquatic environment. In this study, an integrated framework, Efficient Valid Green (EVG), for analytical techniques is proposed and displayed via its radar chart. The EVG framework is achieved through three main pillars: efficiency, validation, and greenness. The proposed EVG-HPLC method was developed and optimized using the AQbD methodology via a face-centered composite (FCC) design by identifying the proper critical method parameters (CMPs) that influence critical quality attributes (CQAs). The method was fully validated according to ICH guidelines, including a factorial robustness study within concentration ranges of 1-100 μg mL-1, 2-100 μg mL-1, and 10-100 μg mL-1 for CIP, SMZ, and ALB, respectively. The proposed method was evaluated in terms of greenness using AGREE (score 0.55) and ComplexGAPI metrics. The optimized chromatographic conditions included a C18 column and a mobile phase of water : acetonitrile : methanol in a ratio of 60 : 19 : 21, v/v/v, respectively, with an aqueous solution of pH 3.5 adjusted with phosphoric acid at a flow rate of 1.57 mL min-1 at 285 nm. The raw water samples collected from Nile River freshwater at different locations were treated using Oasis® PRiME HLB cartridges with satisfactory recoveries for the three analytes (>90%), and the three drugs were detected using the proposed EVG-HPLC method.

Separation and quantitative estimation of stereo-selective enantiomers of montelukast in pharmaceutical drug substance and tablets dosage forms by using stability-indicating normal phase-HPLC method

Montelukast sodium (MLS) is a leukotriene receptor antagonist that relieves asthma, bronchospasm, allergic rhinitis, and urticaria. A simple, robust, and stability-indicating normal phase high-performance liquid chromatography method was developed to separate and quantitatively estimate the S-enantiomer of MLS. The chiral separation was achieved using USP L51 packing material along with a mobile phase consisting of a solvent mixture (n-hexane, ethanol, and propionic acid), a flow rate of 1.0 mL/min, a detection wavelength of 284 nm, a column temperature of 30°C and an injection volume of 20 μL. The enantiomers peaks were well separated from the peaks of the placebo, diluting solvent, MLS, and its known impurities with a resolution of more than 2.2 and with no interference. Accuracy and linearity were studied in a range of 0.36-3.597 μg/mL (0.03%-0.30%), with good recoveries between 92.5% and 96.8% and a linear regression coefficient above 0.996. The suggested chiral chromatography method is being considered as an alternative and equivalent method to the United States Pharmacopeia and European Pharmacopeia monographs. The developed method was effectively employed for the study of release and stability samples of MLS. This HPLC method is also capable of separating and estimating the stereo-selective isomers (R- and S-enantiomers) of sulfoxide impurity of MLS in pharmaceutical medicine.

A sensitive UPLC-MS/MS method for the simultaneous assay and trace level genotoxic impurities quantification of SARS-CoV-2 inhibitor-Molnupiravir in its pure and formulation dosage forms using fractional factorial design

Two potential genotoxic impurities were identified (PGTIs)-viz. 4-amino-1-((2R,3R,4S,5R)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)pyrimidin-2(1H)-one (PGTI-1), and 1-(2R,3R,4S,5R)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)pyrimidin-2,4(1H,3H)-one (PGTI-II) in the Molnupiravir (MOPR) synthetic routes. COVID-19 disease was treated with MOPR when mild to moderate symptoms occurred. Two (Q)-SAR methods were used to assess the genotoxicity, and projected results were positive and categorized into Class-3 for both PGTIs. A simple, accurate and highly sensitive ultra-performance liquid chromatography-mass spectrometry (UPLC-MS/MS) method was optimized for the simultaneous quantification of the assay, and these impurities in MOPR drug substance and formulation dosage form. The multiple reaction monitoring (MRM) technique was utilized for the quantification. Prior to the validation study, the UPLC-MS method conditions were optimised using fractional factorial design (FrFD). The optimized Critical Method Parameters (CMPs) include the percentage of Acetonitrile in MP B, Concentration of Formic acid in MP A, Cone Voltage, Capillary Voltage, Collision gas flow and Desolvation temperature were determined from the numerical optimization to be 12.50 %, 0.13 %, 13.6 V, 2.6 kV, 850 L/hr and 375 °C, respectively. The optimized chromatographic separation achieved on Waters Acquity HSS T3 C18 column (100 mm × 2.1 mm, 1.8 µm) in a gradient elution mode with 0.13% formic acid in water and acetonitrile as mobile phases, column temperature kept at 35 °C and flow rate at 0.5 mL/min. The method was successfully validated as per ICH guidelines, and demonstrated excellent linearity over the concentration range of 0.5-10 ppm for both PGTIs. The Pearson correlation coefficient of each impurity and MOPR was found to be higher than 0.999, and the recoveries were in between the range of 94.62 to 104.05% for both PGTIs and 99.10 to 100.25% for MOPR. It is also feasible to utilise this rapid method to quantify MOPR accurately in biological samples.

Stability-indicating method development and validation for quantitative estimation of organic impurities of the antidiabetic drug glipizide in drug substance and pharmaceutical dosage form using HPLC

Glipizide is an antidiabetic drug used for the treatment of type 2 diabetes. A simple, reliable and robust reverse-phase liquid chromatographic method (RP-HPLC) was developed and validated as per International Conference on Harmonization Q2(R1) for estimating the impurities of glipizide in pharmaceutical formulations. The chromatographic separation was carried out on a Phenomenex Luna C18 (2), 250 × 4.6 mm, 5 μm with a binary solvent delivery system [MP-A, a homogenous mixture of water and acetonitrile in a ratio of 90:10 (v/v) and 1 ml of orthophosphoric acid; and MP-B, a homogenous mixture of water and acetonitrile in a ratio of 10:90 (v/v) and 1 ml of orthophosphoric acid] with a detection wavelength of 225 nm, a column temperature of 30°C, a flow rate of 1.5 ml/min, and an injection volume of 20 μl. All process, degradant and unknown impurities were separated well with a resolution >2.2 and were estimated accurately without any interference. The recovered values and regression values were 98.7-100.5% and R2  > 0.9999, respectively. The recovery and linearity studies covered the quantitation limit to 150% of the specification limit. The stability-indicating properties of the developed RP-HPLC method was assessed from the forced degradation studies. The developed method was successfully applied for real-time sample analysis of the glipizide dosage form.

Drilling into "Quality by Design" Approach for Analytical Methods

The need for consistency in analytical method development reinforces the dependence of pharmaceutical product development and manufacturing on robust analytical data. The Analytical Quality by Design (AQbD), akin to the product Quality by Design (QbD) endows a high degree of confidence to the method quality developed. AQbD involves the definition of the analytical target profile as starting point, followed by the identification of critical method variables and critical analytical attributes, supported on risk assessment and design of experiment tools for the establishment of a method operable design region and control strategy of the method. This systematic approach moves away from reactive troubleshooting to proactive failure reduction. The objective of this review is to highlight the elements of the AQbD framework and provide an overview of their implementation status in various analytical methods used in the pharmaceutical field. These methodologies include but are not limited to, high-performance liquid chromatography, UV-Vis spectrophotometry, capillary electrophoresis, supercritical fluid chromatography, and high-performance thin-layer chromatography. Finally, a critical appraisal is provided to highlight how regulators have encouraged AQbD principles application to boost the prevention of method failures and a better understanding of the method operable design region (MODR) and control strategy, ultimately resulting in cost-effectiveness and regulatory flexibility.

Stability-indicating normal-phase HPLC method development for separation and quantitative estimation of S-enantiomer of lacosamide in pharmaceutical drug substance and tablet dosage form

Lacosamide (LA) is an antiepileptic medicine that is used to treat tonic-clonic seizures, partial-onset seizures, mental problems, and pain. A simple, effective, and reliable normal-phase liquid chromatographic technique was developed and validated to separate and estimate the enantiomer of (S-enantiomer) LA in pharmaceutical drug substance and drug product. Normal-phase LC was performed using USP L40 packing material (250 × 4.6 mm, 5 μm) and a mobile phase of n-hexane and ethanol at 1.0 ml min-1 . The detection wavelength, column temperature, and injection volume used were 210 nm, 25°C, and 20 μl, respectively. The enantiomers (LA and S-enantiomer) were completely separated using a minimum resolution of 5.8 and accurately quantified without any interference in a 25-min run time. Accuracy study for stereoselective and enantiomeric purity trials was conducted between 10 and 200%, with recovery values ranging from 99.4 to 103.1% and linear regression values >0.997. The stability-indicating characteristics were assessed using forced degradation tests. The proposed normal-phase HPLC technique is an alternate approach to the official monograph methods (USP and Ph.Eur.) of LA, and it was successfully used in the evaluation of release and stability samples for both tablet dosage forms and pharmaceutical substances.

Classical versus chemometrics tools for spectrophotometric determination of fluocinolone acetonide, ciprofloxacin HCl and ciprofloxacin impurity-A in their ternary mixture

Green, simple, accurate and robust univariate and chemometrics assisted UV spectrophotometric approaches have been adopted and validated for concurrent quantification of fluocinolone acetonide (FLU), ciprofloxacin HCl (CIP) together with ciprofloxacin impurity-A (CIP imp-A) in their ternary mixture. Double-divisor ratio spectra derivative (DDRD) method has been used for determination of FLU. On the other hand, the first (D¹) and second (D²) derivative approaches have been applied for the quantification of CIP and CIP imp-A, respectively. For the ratio difference (RD), derivative ratio (DR), and mean centering of ratio spectra (MC) methods, CIP and its impurity A have been simultaneously determined. The acquired calibration plots were linear over the concentration range of 0.6-20.0 μg/mL, 1.0-40.0 μg/mL and 1.0-40.0 μg/mL for fluocinolone acetonide, ciprofloxacin HCl, and ciprofloxacin impurity-A, respectively. The chemometrics methods namely; partial least squares (PLS) and artificial neural networks (ANN) were used for the concurrent determination of the three adopted components via using twenty-five mixtures as calibration set and fifteen mixtures as validation one. The investigated approaches were validated in accordance with International Council for Harmonisation (ICH) guidelines, and statistically compared with the official ones. The proposed methods were acceptably applied to the examination of FLU and CIP in their pure powders and pharmaceutical ear drops.

An effective and stability-indicating method development and optimization utilizing the Box-Behnken design for the simultaneous determination of acetaminophen, caffeine, and aspirin in tablet formulation

Analytical techniques must be sensitive, specific, and accurate to assess the active pharmaceutical ingredients in pharmaceutical dosage forms. The quality-by-design (QbD) application has proven to be a practical method for magnifying HPLC operations. This article discusses the successfully developed QbD-based stability-indicative LC method for evaluating acetaminophen, caffeine, and aspirin (ASP) in tablet dosage form. To achieve the necessary chromatographic separation, Milli-Q water, methanol, and glacial acetic acid were employed in the following ratios: 63:35:2 (v/v/v) for mobile phase A and 18:80:2 (v/v/v) for mobile phase B. The flow rate, column temperature, and detecting wavelength were 1.0 ml/min, 40°C, and 275 nm, respectively, and an InertSustain C18 analytical column (150 × 4.6 mm, 3 μm) was used. Linearity was between 10.0 and 150.0 μg/ml for ASP and acetaminophen and between 2.6 and 39.0 μg/ml for caffeine. The accuracy findings were more than 97%, and the correlation coefficient for all three components was found to be greater than 0.999. The validated HPLC method yielded reliable and accurate results. ASP was shown to be vulnerable to both acid and alkaline hydrolysis in the forced degradation study. The described method is capable of separating the degradants produced during stress testing and is regarded as stability indicating. The proposed method can be used for a wider range of other formulations with an appropriate diluent selection and sample preparation procedure optimization.

QbD-based stability-indicating liquid chromatography (RP-HPLC) method for the determination of flurbiprofen in cataplasm

A nonsteroidal drug called flurbiprofen (FBN) has analgesic, anti-inflammatory and antipyretic activity. Currently the determination of FBN in cataplasm does not have any pharmacopeial method. However, the drug substance, tablet and ophthalmic solution formulations do have pharmacopeial methods. The development and validation of an accurate, precise and stability-indicating analytical method for the determination of FBN in cataplasm formulations is reported. The gradient method was employed for the quantification of FBN in the presence of internal standards such as biphenyl. A nonpolar separation phase (C₁₈ , 250 × 4.6 mm, 5 μm Inertsil column; GL Sciences) was used. The optimal flow rate, column oven temperature, injection volume and detector wavelengths were 1.0 ml/min, 40°C, 20 μl and 245 nm, respectively. Mobile phase A was a mixture of water and glacial acetic acid (30:1 v/v) pH adjusted to 2.20 with glacial acetic acid or 1 m NaOH; mobile phase B was methanol (100%). The gradient elution program was [time (min)/% B]: 5/60, 20/70, 25/70, 30/60 and 40/60. The obtained RSDs for the precision and intermediate precision were 0.7 and 0.5%. The percentage recovery ranged from 99.2 to 100.4%. The linear regression coefficient >0.9996 indicates that all peak responses were linear with the concentration. The sample and standard solutions were stable for up to 24 h on the benchtop and in the refrigerator. The critical peaks were well separated from the generated peaks owing to forced degradation, including diluent and placebo peaks. The method validation data and quality by design-based robustness study results indicate that the developed method is robust and fit for routine use in the quality control laboratory. The proposed method is specific, accurate and precise, and the quality by design utilized the first method for the determination of FBN in cataplasm formulations. Transdermal patches and gels have low extraction capacity and this method is applicable for quantification.

Determination and quantification of related substances and degradation products in bictegravir by full factorial design evaluated HPLC and mass spectrometry

Determining and quantifying novel impurities and degraded impurities of a drug product is always a continuous challenge to enhancing the drug quality for patients' safety. Herein, our work deals with (i) developing a rapid, accurate, and reliable high-performance liquid chromatographic validation method to quantify the bictegravir drug (integrase inhibitors of antiretroviral drugs) and its novel related impurities at low levels, and (ii) the liquid chromatography-mass spectrometry (LC-MS) method to identify degraded impurities. Separation of bictegravir acid (impurity-I) and methyl bictegravir (impurity-II) impurities which are identified by LC-MS in the bictegravir drug was executed by developing a method and the same method performance evaluated by using full factorial design. This developed analytical technique gave a well-separated peak of bictegravir and related analytes such as bictegravir acid (impurity-I) and methyl bictegravir (impurity-II), adequate with the peak properties as per USP guidelines. The method's sensitivity and linearity are demonstrated by its detection and quantification limits at low levels with a correlation coefficient of 0.998. The method's repeatability, specificity, and accuracy suggest that this developed technique is a reliable determination strategy for the bictegravir drug substance and its related impurities (impurity-I and impurity-II) in a simple, feasible, and affordable way.

A combined qualitative and quantitative method development and validation of vancomycin hydrochloride injection formulation by HPLC and UV involving quality by design

A selective, specific, precise, linear, accurate and robust analytical method was developed and validated for the assay of vancomycin HCl in vancomycin hydrochloride injection. Comparative UV spectrophotometric and reverse-phase HPLC were used to develop the quantitative determination. Acetonitrile and pH 2.2 phosphate buffer in the ratio 20:80 v/v were used as the mobile phase, and a flow rate of 1.0 ml/min with a 20 min run time. The detection was carried out at 235 nm with a Nucleosil C₁₈ (250 × 4.6 mm) 10 μm column, and the ambient column temperature was maintained. The method uses a 20 μl injection volume and diluent as a blank solution in this connection. The method was validated as per the current regulatory guidelines. The linearity of this method was found to be linear in the range of 50-150% of the working concentration, and the correlation coefficient was >0.999. The method's accuracy was within the acceptable range, which was 98.1-101.5%. The method's precision was within an acceptable range of about 0.32% RSD. The analytical solution was stable for up to 48 h at room temperature. The method's robustness was proved by utilizing quality design tools. Stress studies demonstrated the method's stability-indicating nature.

Development and validation of a stability-indicating, single HPLC method for sacubitril-valsartan and their stereoisomers and identification of forced degradation products using LC-MS/MS

The aim of this research work was to develop and validate a stability-indicating, single reversed-phase HPLC method for the separation of five impurities, including enantiomers, diastereomers, and degradation products in sacubitril-valsartan tablets. The method was developed using a Chiralcel OJ-RH column (150 × 4.6 mm, 5 μm) at 45°C with a gradient program of (T/%B) 0.01/25, 10.0/25, 25/38, 37.0/45, 39.0/25, and 45.0/25 at a flow rate of 0.8 ml/min. Mobile phase A consisted of 1 ml of trifluoroacetic acid in 1000 ml of Milli-Q water. Mobile phase B consisted of 1 ml of trifluoroacetic acid in a mixture of acetonitrile and methanol in the ratio of 950:50 (v/v). Sacubitril, valsartan, and their five impurities were monitored at 254 nm. Degradation was not observed when sacubitril-valsartan was subjected to heat, light, hydrolytic, and oxidation conditions. In acid degradation study (1 N HCl/60°C/2 h) impurity 1 (m/z 383.44) was formed, and in base degradation study (0.1 N NaOH/40°C/1 h) impurities 1 and 5 (m/z 265.35) were formed; both impurities were confirmed using LC-MS. The degradation products, enantiomers, and diastereomers were well separated from sacubitril and valsartan, proving the stability-indicating power of the method. The developed method was validated per the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines. The inter- and intra-day percentage relative standard deviation for sacubitril, valsartan, and their five impurities was less than 5.2%, recovery of the five impurities was between 93 and 105%, and linearity was ≥0.999. The limit of detection was 0.030-0.048 μg/ml, and the limit of quantification was 0.100-0.160 μg/ml.

Multiple spectrophotometric determinations of Chlorthalidone and Cilnidipine using propylene carbonate - As a step towards greenness

Analyzing a drug based on its overlapping spectra requires the use of sophisticated equipment and more hazardous solvents, which is detrimental to ecological sustainability. There is a critical need to create a simple, unique, and cost-effective approach for detecting a mixture of compounds in a safer environment. The aim was to develop an eco-friendly, stability-indicating assay method to determine Chlorthalidone (CLD) and Cilnidipine (CIL) in bulk and tablet dosage form using four different Ultra-Violet (UV) spectrophotometric methods. The ratio difference method showed absorbance peaks at 256.01 nm, 220.87 nm, first ratio difference spectra at 267.21 nm, 288.03 nm, and second ratio difference spectra at 309.2 nm, 280.03 nm. The area under curve techniques showed an absorbance range of around 224-232 nm for CIL and 218-227 nm for CLD. Further, the spectral changes have been assessed at various conditions like acid, base, oxidation, and UV radiation, and it has been found that CLD tends to lose its spectral property by more than 45%. The method developed for two drugs has obeyed Beers law with the selected concentration range of 7-13 μg/mL for CLD and 8.75-16.25 μg/mL for CIL. The developed method was finally evaluated using four tools, and the results showed green pictographically representation in the GAPI and score near to 100 for AES and closer to 1 for AGREE indicated that the method was found to be most eco-friendly. The findings were easy to replicate, adoptive with major regulatory requirements, environmentally friendly, fast, and inexpensive to perform. This approach does not require any specific expensive equipment, and it might be inexpensive to use in the future to assess laboratory and commercial mixtures.

AQbD based green UPLC method to determine mycophenolate mofetil impurities and Identification of degradation products by QToF LCMS

We report an ideal method for quantifying impurities in mycophenolate mofetil drug substances and their oral suspension preparations. We developed a systematic and eco-friendly analytical approach utilizing quality by design (QbD) and green chemistry principles. Initially, the critical method parameters (CMPs) were screened using a D-optimal design. The robust final method conditions were optimized using a systematic central composite design (CCD). Through graphical and numerical optimization, the protocol conditions were augmented. The pH of mobile phase buffer (25 mM KH₂PO₄) (MP-A), initial gradient composition (% MP-A), flow rate (mL min^-1), and column oven temperatures (°C) are 4.05, 87, 0.4, and 30, respectively. The best possible separation between the critical pairs was achieved while using the Waters Acquity UPLC BEH C₁₈ (100 × 2.1) mm, 1.7 µm analytical column. A mixture of water and acetonitrile in the ratio of 30:70 (v/v) was used as mobile phase-B for the gradient elution. The analytical method was validated in agreement with ICH and USP guidelines. The specificity results revealed that no peaks interfered with the impurities and MPM. The mean recovery of the impurities ranged between 96.2 and 102.7%, and the linearity results r > 0.999 across the range of LOQ - 150%. The precision results (%RSD) ranged between 0.8 and 4.5%. The degradation products formed during the base-induced degradation were identified as isomers of mycophenolic acid and sorbitol esters using Q-ToF LC-MS and their molecular and fragment ion peaks. The developed method eco-friendliness and greenness were assessed using analytical greenness (AGREE), green analytical procedure index (GAPI), and analytical eco score, and found it is green.

Analytical Quality by Design (AQbD) Approach to the Development of Analytical Procedures for Medicinal Plants

Scientific regulatory systems with suitable analytical methods for monitoring quality, safety, and efficacy are essential in medicinal plant drug discovery. There have been only few attempts to adopt the analytical quality by design (AQbD) strategy in medicinal plants analysis over the last few years. AQbD is a holistic method and development approach that understands analytical procedure, from risk assessment to lifecycle management. The enhanced AQbD approach reduces the time and effort necessary to develop reliable analytical methods, leads to flexible change control through the method operable design region (MODR), and lowers the out-of-specification (OOS) results. However, it is difficult to follow all the AQbD workflow steps in the field of medicinal plants analysis, such as defining the analytical target profiles (ATPs), identifying critical analytical procedure parameters (CAPPs), among others, because the complexity of chemical and biological properties in medicinal plants acts as a barrier. In this review, various applications of AQbD to medicinal plant analytical procedures are discussed. Unlike the analysis of a single compound, medicinal plant analysis is characterized by analyzing multiple components contained in biological materials, so it will be summarized by focusing on the following points: Analytical methods showing correlations within analysis parameters for the specific medicinal plant analysis, plant raw material diversity, one or more analysis targets defined for multiple phytochemicals, key analysis attributes, and analysis control strategies. In addition, the opportunities available through the use of design-based quality management techniques and the challenges that coexist are also discussed.