Adsorption of cobalt species on the interface, which is developed between aqueous solution and metal oxides used for the preparation of supported catalysts: a critical review

The effect of chelating anions on the retention of Co(II) by γ-alumina from aqueous solutions under the unadjusted pH condition of supported catalyst preparation

This study analyzes the effect of the addition of acetate, citrate, and nitrilotriacetate anions on the retention of Co(II) cations by the γ-alumina surface in view of the preparation of alumina supported cobalt catalysts. The emphasis was placed on the way the Co(II) species attach to the solid surface when adsorbed from aqueous solutions under the unadjusted pH condition. The individual adsorption isotherms onto γ-Al₂O₃ support for cobalt and a given ligand were determined by following the solution depletion method in single-solute and bi-solute systems. These adsorption data were supplemented by the results of potentiometric titrations. In the case of bi-solute systems, the adsorption procedures allowed either co-impregnation of γ-alumina with equimolar solutions of cobalt and ligand salts or pre-impregnation of γ-alumina with the ligand anions and the subsequent adsorption of cobalt. Changes in the pH of the equilibrium solid-liquid suspension were also monitored along the adsorption isotherms. The adsorption of Co(II) onto γ-Al₂O₃ in the presence of acetate and nitrilotriacetate led to the formation of the type A (i.e., solid-metal-ligand) ternary complexes. The use of citrate anions together with Co(II) cations was shown to improve the impregnation process through the formation of ternary complexes of type B (i.e., solid-ligand-metal). The comparison with a system containing tricarballylate anions allowed concluding that the presence of the hydroxyl group in the citrate anion enhanced its affinity for the alumina surface by contributing to the inner-sphere character of its surface-bound complexes.

Effects of ionic strength on removal of toxic pollutants from aqueous media with multifarious adsorbents: A review

Adsorption is one of the most widely used and effective wastewater treatment methods. The role of ionic strength (IS) in shaping the adsorption performances is much necessary due to the ubiquity of electrolyte ions in water body and industrial effluents. The influences of IS on adsorption are rather complex, because electrolyte ions affect both adsorption kinetics and thermodynamics by changing the basic characteristics of adsorbents and adsorbates. For a given adsorption system, multiple or even contradictory effects of IS may coexist under identical experimental conditions, rendering the dominant mechanism recognition and net effect prediction complicated. We herein reviewed the key advancement on the interaction and mechanisms of IS, including change in number of active sites for adsorbents, ion pair for metal ions, molecular aggregation and salting-out effect for organic compounds, site competition for both inorganic and organic adsorbates, and charge compensation for adsorbent-adsorbate reciprocal interactions. The corresponding fundamental theory was thoroughly described, and the efforts made by various researchers were explicated. The structural optimization of adsorbents affected by IS was detailed, also highlighting polyamine materials with exciting "salt-promotion" effects on heavy metal removal from high salinity wastewater. In addition, the research trends and prospects were briefly discussed.

Enhanced removal of Cu(II) and Ni(II) from saline solution by novel dual-primary-amine chelating resin based on anion-synergism

A novel dual-primary-amine chelating resin (EDTB) was newly synthesized for the effective removal of Cu(II) and Ni(II) from saline solutions. NaNO3 as well as Ca(NO3)2, NaCl and CaCl2 unexpectedly promoted the adsorption of Cu(II) or Ni(II) by up to 63.42% or 133.49% in single heavy-metal species systems. Meanwhile, inorganic salts enhanced both Cu(II) and Ni(II) uptake capacities in binary heavy-metal species systems. Anions significantly increased the amount of adsorption sites by condensing the double electric layer. Interestingly, increasing Ni(NO3)2 concentrations elevated the adsorption capacity of EDTB for Cu(II) by 2.10-11.69% in aqueous media without salts while in the presence of salts, rising Ni(NO3)2 concentrations suppressed Cu(II)-adsorption by 2.42-7.68%. The marginal analysis of anion-synergism depending on salt concentrations quantitatively explained such opposite effects using a promotion index. Furthermore, the solid characterizations and a newly-proposed metastable-state model based on pre-loading experiments conformably indicated the reciprocal relationships between cations and anions involving site competition, displacement effect and anion enhancement. Because of such salt-enhanced removal performance and excellent regeneration efficiency higher than 99%, EDTB is potentially eligible for reusing heavy-metals from actual wastewaters especially containing high-concentration salts.

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

A novel tetraethylenepentamine functionalized polymeric adsorbent with polymethacrylate–divinylbenzene as the substrate was facilely prepared for the enhanced removal and selective recovery of Cu(ii) and Ni(ii) from saline solutions.

Tailoring the oxidation state of cobalt through halide functionality in sol-gel silica

The functionality or oxidation state of cobalt within a silica matrix can be tailored through the use of cationic surfactants and their halide counter ions during the sol-gel synthesis. Simply by adding surfactant we could significantly increase the amount of cobalt existing as Co₃O₄ within the silica from 44% to 77%, without varying the cobalt precursor concentration. However, once the surfactant to cobalt ratio exceeded 1, further addition resulted in an inhibitory mechanism whereby the altered pyrolysis of the surfactant decreased Co₃O₄ production. These findings have significant implications for the production of cobalt/silica composites where maximizing the functional Co₃O₄ phase remains the goal for a broad range of catalytic, sensing and materials applications.

Impregnation of decamolybdocobaltate heteropolyanions over γ-alumina: detailed description of the physico-chemical phenomena

In this work, the physicochemical phenomena occurring during equilibrium impregnation of Anderson-like decamolybdocobaltate H(4)Co(2)Mo(10)O(38)(6-) heteropolyanion aqueous solutions over γ-Al(2)O(3) were described in detail comprising chemical analysis, pH measurements, Raman, and UV-vis spectra. For a surface density lower than 2.5 Mo atoms nm(-2), the buffering effect of the support leads to decomposition of H(4)Co(2)Mo(10)O(38)(6-) into monomolybdates MoO(4)(2-) and Co(2+) cobalt cations that are then adsorbed by electrostatic and covalent interactions with γ-alumina. Between 2.5 and 3.8 Mo atoms nm(-2), MoO(4)(2-) monomers condense into heptamolybdates Mo(7)O(24)(6-) that are then adsorbed by electrostatic interactions and H(4)Co(2)Mo(10)O(38)(6-) becomes stable because of the lowering of the pH. Above 3.8 Mo atoms nm(-2), the quantities of adsorbed MoO(4)(2-) and Mo(7)O(24)(6-) become much smaller than that of electrostatically adsorbed H(4)Co(2)Mo(10)O(38)(6-). Adsorption of preserved H(4)Co(2)Mo(10)O(38)(6-) could be consecutive to the decomposition of the first molecules leading to prior adsorption of MoO(4)(2-) and Co(2+), and decrease in the buffering effect of γ-Al(2)O(3) and in the pH value. For dry impregnation, the same physicochemical phenomena occur considering a given Mo surface density. The methodology used in this work to rationalize the preparation of hydrotreatment catalysts from H(4)Co(2)Mo(10)O(38)(6-) heteropolyanions can be transposed to any supported catalyst.

The mechanism of the protonation of metal (hydr)oxides in aqueous solutions studied for various interfacial/surface ionization models and physicochemical parameters: a critical review and a novel approach

The mechanism of the protonation of solid metal (hydr)oxides in aqueous media was investigated using simulation and experimental work. It was found that the apparent acidity/basicity of each kind of surface sites of metal (hydr)oxides in aqueous suspensions is strongly influenced by the overall surface charge of the (hydr)oxide and thus by the electrical potential smeared out at the interfacial region. Depending on its sign this increases or decreases the hydrogen ion concentration on the surface, thus promoting or hindering protonation. This is manifested by the shifts of the protonation peaks of the various kinds of sites with respect to the -pK values of the corresponding intrinsic protonation constants and the appearance of an extra peak in the d[H+cons,surf]/dpH vs. pH curves. Potentiometric titrations experiments performed for four technologically important oxides showed that the proposed protonation mechanism describes indeed the protonation of polycrystalline (hydr)oxides in aqueous media.

How metal (hydr)oxides are protonated in aqueous media: The () rule and the role of the interfacial potential

The mechanism of the protonation of solid metal (hydr)oxides in aqueous media, which is closely interrelated to many processes of great technological and environmental importance, has been elucidated using simulation and experimental work. The electrical potential, smeared out at the interfacial region, changes the concentration of the H+ ions on the surface of the (hydr)oxide, thus promoting or hindering protonation. This is manifested by the shifts of the protonation peaks of the various kinds of surface sites and the appearance of an extra peak in the differential potentiometric titration curve.

The influence of the preparation method and the Co loading on the structure and activity of cobalt oxide/γ-alumina catalysts for NO reduction by propene

In the present work we studied the influence of the preparation method and the Co loading on the physicochemical properties and the catalytic activity of the cobalt oxide/gamma-alumina catalysts for the reduction of NO by propene under net oxidizing conditions. Two series of catalysts containing 1 and 5% w/w Co, respectively, were prepared using three preparation methods, namely, the equilibrium deposition filtration (EDF), the conventional incipient wetness impregnation (IWI) and the IWI adding nitrilotriacetic acid (nta) in the impregnating solution (IWInta). The catalysts were tested at various temperatures in the range 300-550 degrees C using a fixed-bed microreactor for the NO reduction by propene under lean burn conditions. The evolution of the Co species on the alumina surface was followed after each preparation step by diffuse reflectance spectroscopy (DRS). It was found that the catalysts of the first series were more active for the title reaction than those of the second one. The EDF sample of the first series was proved to be the most active and selective one followed by the IWI and then the IWInta sample of the same series. The DRS results indicated that the enhanced activity and selectivity of the EDF sample could be attributed to the increased concentration of isolated Co(II) inner sphere complexes of octahedral coordination, which are formed on the support surface by adsorption of the corresponding aqueous complexes, [Co(H2O)6]2+, being in the impregnating solution. These inner sphere complexes are transformed upon thermal treatment into a CoAl2O4 like phase with high dispersion. On the other hand, the [Co(H2O)6]2+(NO3)2- and [Co-nta]-.NH4+(or H+) and/or [Co-2nta]4+.4NH4+(or 4H+) complex salts, precipitated on the alumina surface upon drying in the cases of the IWI and IWInta samples, are transformed upon calcination into CoAl2O4 like phases with lower dispersion. All the samples of the second series promoted the propene combustion as well as the oxidation of NO and N2, used as carrier gas, to NO2. DRS results revealed that in all these samples cobalt(III) oxo species are formed in addition to the CoAl2O4 phase. These species are considered to be responsible for the enhancement of the rates of the oxidation reactions mentioned above.

Kinetics of Adsorption of the Cobalt Ions on the “Electrolytic Solution/γ-Alumina” Interface

In the present work we studied, for the first time, the kinetics of adsorption of the Co(H(2)O)(6)(2+) species on the "electrolytic solution/gamma-Al(2)O(3)" interface at pH = 7 and 25 degrees C for a very broad range of Co(II) surface concentrations ranged from 0.03 to 6 theoretical Co(H(2)O)(6)(2+) surface layers. Moreover, we studied the surface dissolution of gamma-alumina in the presence of the Co(H(2)O)(6)(2+) ions in the impregnating solution, the contribution of the Co(II) desorption on the whole deposition process and the deposition isotherm. It was found that under the conditions where the deposition has taken place, the dissolution of the gamma-alumina surface is negligible even in the presence of the Co(H(2)O)(6)(2+) species in the impregnating solution. It was, moreover, inferred that the Co(II) desorption does not participate significantly to the whole deposition process. It was found that the deposition kinetics may be described by the following kinetic expression r(Co,bulk) = k'C(Co,bulk)(2), which relates the rate of disappearance of the Co(H(2)O)(6)(2+) ions from the impregnating solution, r(Co,bulk,) with their concentration C(Co,bulk). This kinetic expression may be derived assuming the following deposition scheme: nS + 2[Co(H(2)O)(6)(2+)] --> S(n) - [Co(H(2)O)(x,x)(<)(6)(2+)](2), where S represents the surface reception sites. The above expressions indicated that two Co(H(2)O)(6)(2+) ions are involved, from the side of the interface, in the reaction with the reception sites. It seems probable that the deposition step involves the simultaneous adsorption and dimerization of the two interfacial Co(H(2)O)(6)(2+) ions through (hydr)oxobridges. On the other hand, the sigmoidal form of the deposition isotherm and the dependence of the apparent rate constant, k', on the interfacial Co(II) concentration suggested that the already deposited Co(II) species may be involved in the reception sites, S, promoting the adsorption and resulting to the formation of multinuclear complexes and Co(II) surface precipitates. Finally, reasonable interface potential values for oxides were determined for the first time using kinetic results.

Adsorption of cobalt ions on the "electrolytic solution/gamma-alumina" interface studied by diffuse reflectance spectroscopy (DRS)

Diffuse reflectance spectroscopy was used for the first time to investigate the adsorption of the [Co(H2O)6]2+ ions on the interface developed between the surface of the gamma-alumina particles and the electrolytic aqueous solutions used for the preparation of cobalt-supported gamma-alumina catalysts by equilibrium deposition filtration. The formation of inner-sphere Co(II) surface complexes in which Co(II) is in octahedral symmetry was confirmed. A deconvolution peak centered at approximately 585 nm was attributed to the exchange of one aqua ligand with one AlxOHy (x = 1, 2, or 3; y = 0 or 1) negatively charged surface group resulting in the formation of mononuclear monosubstituted inner-sphere Co(II) complexes at a Co(II) surface concentration equal to 0.02 micromol of Co(II)/m2. It was inferred that as the surface Co(II) concentration increases the formation of disubstituted and/or trisubstituted surface complexes is favored with respect to the formation of monosubstituted Co(II) surface complexes. A deconvolution peak centered at approximately 640 nm was attributed to the exchange of one or more aqua ligands with bridging hydroxo ligands (Co-O-H). The relative magnitude of this peak increases with the Co(II) surface concentration, reflecting the increasing formation of binuclear, oligonuclear, and multinuclear Co(II) surface complexes and then the formation of the Co(II) surface precipitate.