Bio-templated silica composites for next-generation biomedical applications

Formation of intraneuronal iron deposits following local release from nanostructured silica injected into rat brain parenchyma

Nanostructured materials with controllable properties have been used to cage and release various types of compounds. In the present study, iron-loaded nanostructured sol-gel SiO2-Fe materials were prepared and injected into the rat brain to develop a method for gradual iron delivery into the neurons with the aims to avoid acute iron toxicity and develop an animal model of gradual, metal-induced neurodegeneration. Nanoparticles were prepared by the traditional method of hydrolysis and condensation reactions of tetraethyl orthosilicate at room temperature and subsequent heat treatment at 200 °C. FeSO4 was added in situ during the silica preparation. The resulting materials were characterized by UV-VIS and infrared spectroscopies, X-ray diffraction, and N2 adsorption-desorption. An in vitro ferrous sulfate release test was carried out in artificial cerebrospinal fluid as the release medium showing successful ferrous sulfate loading on nanostructured silica and sustained iron release during the test time of 10 h. Male Wistar rats administered with SiO2-Fe nanoparticles in the substantia nigra pars compacta (SNpc) showed significant intraneuronal increase of iron, in contrast to the animals administered with FeSO4 that showed severe neuronal loss, 72 h post-treatment. Both treatments induced lipid fluorescent product formation in the ventral midbrain, in contrast to iron-free SiO2 and PBS-only injection controls. Circling behavior was evaluated six days after the intranigral microinjection, considered as a behavioral end-point of brain damage. The apomorphine-induced ipsilateral turns in the treated animals presented significant differences in relation to the control groups, with FeSO4 administration leading to a dramatic phenotype, compared to a milder impact in SiO2-Fe administrated animals. Thus, the use of SiO2-Fe nanoparticles represents a slow iron release system useful to model the gradual iron-accumulation process observed in the SNpc of patients with idiopathic Parkinson's disease.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

Layer-by-layer coating of natural diatomite with silver nanoparticles for identification of circulating cancer protein biomarkers using SERS

Surface-enhanced Raman scattering (SERS) is an emerging spectroscopy technique for detecting and characterizing chemical or biological structures in the vicinity of plasmonic nanostructures. Colloidal, solid, and flexible nanostructures are widely used in SERS experiments to enhance the Raman intensity. The nanostructure used in SERS is one of the main influencing parameters and a growing research area. Fabrication of simple and cheap SERS substrates with a high enhancement factor is desired. In this study, we fabricated a reproducible, cheap, and flexible SERS active strip by coating natural diatomite (biosilica) with silver nanoparticles (AgNPs) using the layer-by-layer assembly method and the fabricated strip is used for the label-free identification of circulating cancer protein biomarkers. SERS active strips were fabricated having different numbers of AgNP layers on natural diatomite and comprehensive characterization techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV/vis absorption spectrophotometry were used. SERS activities of the strips depending on the number of layers were evaluated using 4-aminothiophenol (4-ATP) and rhodamine 6G (Rh6G) molecules. We found that the SERS intensity is strongly dependent on the number of AgNP layers, with the maximum SERS intensity obtained from the strip with 5 layers of AgNPs, having a 2.0 × 105 enhancement factor. The strip with the highest SERS activity was used for the label-free identification of circulating cancer protein biomarkers (HER2, CA15-3, PSA, MUC4, and CA27-29). The results demonstrate that the fabricated strip can help in the effective label-free identification of circulating protein biomarkers and open new directions for SERS-based label-free biosensing applications.

Biomedical applications of solid-binding peptides and proteins

Over the past decades, solid-binding peptides (SBPs) have found multiple applications in materials science. In non-covalent surface modification strategies, solid-binding peptides are a simple and versatile tool for the immobilization of biomolecules on a vast variety of solid surfaces. Especially in physiological environments, SBPs can increase the biocompatibility of hybrid materials and offer tunable properties for the display of biomolecules with minimal impact on their functionality. All these features make SBPs attractive for the manufacturing of bioinspired materials in diagnostic and therapeutic applications. In particular, biomedical applications such as drug delivery, biosensing, and regenerative therapies have benefited from the introduction of SBPs. Here, we review recent literature on the use of solid-binding peptides and solid-binding proteins in biomedical applications. We focus on applications where modulating the interactions between solid materials and biomolecules is crucial. In this review, we describe solid-binding peptides and proteins, providing background on sequence design and binding mechanism. We then discuss their application on materials relevant for biomedicine (calcium phosphates, silicates, ice crystals, metals, plastics, and graphene). Although the limited characterization of SBPs still represents a challenge for their design and widespread application, our review shows that SBP-mediated bioconjugation can be easily introduced into complex designs and on nanomaterials with very different surface chemistries.

3D Biocomposites Comprising Marine Collagen and Silica-Based Materials Inspired on the Composition of Marine Sponge Skeletons Envisaging Bone Tissue Regeneration

Ocean resources are a priceless repository of unique species and bioactive compounds with denouement properties that can be used in the fabrication of advanced biomaterials as new templates for supporting the cell culture envisaging tissue engineering approaches. The collagen of marine origin can be sustainably isolated from the underrated fish processing industry by-products, while silica and related materials can be found in the spicules of marine sponges and diatoms frustules. Aiming to address the potential of biomaterials composed from marine collagen and silica-based materials in the context of bone regeneration, four different 3D porous structure formulations (COL, COL:BG, COL:D.E, and COL:BS) were fabricated by freeze-drying. The skins of Atlantic cod (Gadus morhua) were used as raw materials for the collagen (COL) isolation, which was successfully characterized by SDS-PAGE, FTIR, CD, and amino acid analyses, and identified as a type I collagen, produced with a 1.5% yield and a preserved characteristic triple helix conformation. Bioactive glass 45S5 bioglass® (BG), diatomaceous earth (D.E.) powder, and biosilica (BS) isolated from the Axinella infundibuliformis sponge were chosen as silica-based materials, which were obtained as microparticles and characterized by distinct morphological features. The biomaterials revealed microporous structures, showing a porosity higher than 85%, a mean pore size range of 138-315 μm depending on their composition, with 70% interconnectivity which can be favorable for cell migration and ensure the needed nutrient supply. In vitro, biological assays were conducted by culturing L929 fibroblast-like cells, which confirmed not only the non-toxic nature of the developed biomaterials but also their capability to support cell adhesion and proliferation, particularly the COL:BS biomaterials, as observed by calcein-AM staining upon seven days of culture. Moreover, phalloidin and DAPI staining revealed well-spread cells, populating the entire construct. This study established marine collagen/silica biocomposites as potential scaffolds for tissue engineering, setting the basis for future studies, particularly envisaging the regeneration of non-load-bearing bone tissues.

Synthesis and Evaluation of a Chitosan–Silica-Based Bone Substitute for Tissue Engineering

Bone defects have prompted the development of biomaterial-based bone substitutes for restoring the affected tissue completely. Although many biomaterials have been designed and evaluated, the combination of properties required in a biomaterial for bone tissue engineering still poses a challenge. In this study, a chitosan–silica-based biocomposite was synthetized, and its physicochemical characteristics and biocompatibility were characterized, with the aim of exploring the advantages and drawbacks of its use in bone tissue engineering. Dynamic light scattering measurements showed that the mean hydrodynamic size of solid silica particles (Sol-Si) was 482 ± 3 nm. Scanning electron microscopy of the biocomposite showed that Sol-Si were homogenously distributed within the chitosan (CS) matrix. The biocomposite swelled rapidly and was observed to have no cytotoxic effect on the [3T3] cell line within 24 h. Biocompatibility was also analyzed in vivo 14 days post-implant using a murine experimental model (Wistar rats). The biocomposite was implanted in the medullary compartment of both tibiae (n = 12). Histologically, no acute inflammatory infiltrate or multinucleated giant cells associated to the biocomposite were observed, indicating good biocompatibility. At the tissue–biocomposite interface, there was new formation of woven bone tissue in close contact with the biocomposite surface (osseointegration). The new bone formation may be attributed to the action of silica. Free silica particles originating from the biocomposite were observed at the tissue–biocomposite interface. According to our results, the biocomposite may act as a template for cellular interactions and extracellular matrix formation, providing a structural support for new bone tissue formation. The CS/Sol-Si biocomposite may act as a Si reservoir, promoting new bone formation. A scaffold with these properties is essential for cell differentiation and filling a bone defect.

The complex hydrogel based on diatom biosilica and hydroxybutyl chitosan for wound healing

In this study, doxycycline (DOXY)-loaded diatom biosilica (DBs) were developed and coated with hydroxybutyl chitosan (HBC) hydrogel for wound healing. The HBC/DBs/DOXY composite hydrogel had significant inhibitory activity against S. aureus (100%) and E. coli (98%). In addition, the HBC/DBs/DOXY hydrogel showed minimum cytotoxicity on L929 cells in vitro, indicating the great biocompatibility of the composite hydrogel. The in vivo results demonstrated that HBC/DBs/DOXY composite hydrogel could promote the wound re-epithelialization and accelerate the healing. The wound closure was evaluated to be 99.4 ± 0.4% at day 12 after treated with the hydrogel, with the presence of neovascularization and collagen deposition, all indicating the great potential of HBC/DBs/DOXY hydrogel in wound healing.

Novel Drug and Gene Delivery System and Imaging Agent Based on Marine Diatom Biosilica Nanoparticles

Mesoporous silica nanoparticles (MSNs) have great potential for applications as a drug delivery system (DDS) due to their unique properties such as large pore size, high surface area, biocompatibility, biodegradability, and stable aqueous dispersion. The MSN-mediated DDS can carry chemotherapeutic agents, optical sensors, photothermal agents, short interfering RNA (siRNA), and gene therapeutic agents. The MSN-assisted imaging techniques are applicable in cancer diagnosis. However, their synthesis via a chemical route requires toxic chemicals and is challenging, time-consuming, and energy-intensive, making the process expensive and non-viable. Fortunately, nature has provided a viable alternative material in the form of biosilica from marine resources. In this review, the applications of biosilica nanoparticles synthesized from marine diatoms in the field of drug delivery, biosensing, imaging agents, and regenerative medicine, are highlighted. Insights into the use of biosilica in the field of DDSs are elaborated, with a focus on different strategies to improve the physico-chemical properties with regards to drug loading and release efficiency, targeted delivery, and site-specific binding capacity by surface functionalization. The limitations, as well as the future scope to develop them as potential drug delivery vehicles and imaging agents, in the overall therapeutic management, are discussed.

Biomimetic Nanomaterials: Diversity, Technology, and Biomedical Applications

Biomimetic nanomaterials (BNMs) are functional materials containing nanoscale components and having structural and technological similarities to natural (biogenic) prototypes. Despite the fact that biomimetic approaches in materials technology have been used since the second half of the 20th century, BNMs are still at the forefront of materials science. This review considered a general classification of such nanomaterials according to the characteristic features of natural analogues that are reproduced in the preparation of BNMs, including biomimetic structure, biomimetic synthesis, and the inclusion of biogenic components. BNMs containing magnetic, metal, or metal oxide organic and ceramic structural elements (including their various combinations) were considered separately. The BNMs under consideration were analyzed according to the declared areas of application, which included tooth and bone reconstruction, magnetic and infrared hyperthermia, chemo- and immunotherapy, the development of new drugs for targeted therapy, antibacterial and anti-inflammatory therapy, and bioimaging. In conclusion, the authors’ point of view is given about the prospects for the development of this scientific area associated with the use of native, genetically modified, or completely artificial phospholipid membranes, which allow combining the physicochemical and biological properties of biogenic prototypes with high biocompatibility, economic availability, and scalability of fully synthetic nanomaterials.

Synthesis and Processing of Nanomaterials Mediated by Living Organisms

Nanomaterials offer exciting properties and functionalities. However, their production and processing frequently involve complex methods, cumbersome equipment, harsh conditions, and hazardous media. The capability of organisms to accomplish this using mild conditions offers a sustainable, biocompatible, and environmentally friendly alternative. Different nanomaterials such as metal nanoparticles, quantum dots, silica nanostructures, and nanocellulose are being synthesized increasingly through living entities. In addition, the bionanofabrication potential enables also the in situ processing of nanomaterials inside biomatrices with unprecedented outcomes. In this Minireview we present a critical state‐of‐the‐art vision of current nanofabrication approaches mediated by living entities (ranging from unicellular to higher organisms), in order to expand this knowledge and scrutinize future prospects. An efficient interfacial interaction at the nanoscale by green means is within reach through this approach.

Cationic polymeric template-mediated preparation of silica nanocomposites

Biosilicification allows the formation of complex and delicate biogenic silica in near-neutral solutions under ambient conditions. Studies have revealed that, during biosilicification, basic amino acid residues and long-chain polyamines of organic substrates interact electrostatically with negatively charged silicate precursors in solution, catalyzing the polycondensation of silicic acid and accelerating the formation of silica. This mechanism has inspired researchers to explore polymers bearing chemical similarity with these organic matrices as cationic templates for biomimetic silicification. Such templates can be classified into two general categories based on the physical forms applied. One is a solution of water-soluble cationic polymers, either natural or synthetic, used as is for silicification. The other category includes various microscopically shaped entities made of cationic polymer-containing molecules, in the form of micelles, vesicles, crystalline aggregates, latex particles, and microgels. Combined with controlled polymerization and other techniques, these preorganized templates can be tailor designed in terms of sizes and morphologies to allow further expansion of properties and functions. In this review, notable research progress for both categories of silicification under biomimetic conditions is discussed. With the merits of silica and cationic polymers seamlessly integrated, the potential of such versatile nanocomposites in biomedical as well as energy and environmental applications is also briefly highlighted.

Diatom-inspired multiscale mineralization of patterned protein-polysaccharide complex structures

Marine diatoms construct their hierarchically ordered, three-dimensional (3D) external structures called frustules through precise biomineralization processes. Recapitulating the remarkable architectures and functions of diatom frustules in artificial materials is a major challenge that has important technological implications for hierarchically ordered composites. Here, we report the construction of highly ordered, mineralized composites based on fabrication of complex self-supporting porous structures-made of genetically engineered amyloid fusion proteins and the natural polysaccharide chitin-and performing in situ multiscale protein-mediated mineralization with diverse inorganic materials, including SiO2, TiO2 and Ga2O3. Subsequently, using sugar cubes as templates, we demonstrate that 3D fabricated porous structures can become colonized by engineered bacteria and can be functionalized with highly photoreactive minerals, thereby enabling co-localization of the photocatalytic units with a bacteria-based hydrogenase reaction for a successful semi-solid artificial photosynthesis system for hydrogen evolution. Our study thus highlights the power of coupling genetically engineered proteins and polysaccharides with biofabrication techniques to generate hierarchically organized mineralized porous structures inspired by nature.

Mini-Review: Potential of Diatom-Derived Silica for Biomedical Applications

Diatoms are unicellular eukaryotic microalgae widely distributed in aquatic environments, possessing a porous silica cell wall known as frustule. Diatom frustules are considered as a sustainable source for several industrial applications because of their high biocompatibility and the easiness of surface functionalisation, which make frustules suitable for regenerative medicine and as drug carriers. Frustules are made of hydrated silica, and can be extracted and purified both from living and fossil diatoms using acid treatments or high temperatures. Biosilica frustules have proved to be suitable for biomedical applications, but, unfortunately, they are not officially recognised as safe by governmental food and medical agencies yet. In the present review, we highlight the frustule formation process, the most common purification techniques, as well as advantages and bottlenecks related to the employment of diatom-derived silica for medical purposes, suggesting possible solutions for a large-scale biosilica production.

Dry Two-Step Self-Assembly of Stable Supported Lipid Bilayers on Silicon Substrates

Artificial membranes are models for biological systems and are important for applications. We introduce a dry two-step self-assembly method consisting of the high-vacuum evaporation of phospholipid molecules over silicon, followed by a subsequent annealing step in air. We evaporate dipalmitoylphosphatidylcholine (DPPC) molecules over bare silicon without the use of polymer cushions or solvents. High-resolution ellipsometry and AFM temperature-dependent measurements are performed in air to detect the characteristic phase transitions of DPPC bilayers. Complementary AFM force-spectroscopy breakthrough events are induced to detect single- and multi-bilayer formation. These combined experimental methods confirm the formation of stable non-hydrated supported lipid bilayers with phase transitions gel to ripple at 311.5 ± 0.9 K, ripple to liquid crystalline at 323.8 ± 2.5 K and liquid crystalline to fluid disordered at 330.4 ± 0.9 K, consistent with such structures reported in wet environments. We find that the AFM tip induces a restructuring or intercalation of the bilayer that is strongly related to the applied tip-force. These dry supported lipid bilayers show long-term stability. These findings are relevant for the development of functional biointerfaces, specifically for fabrication of biosensors and membrane protein platforms. The observed stability is relevant in the context of lifetimes of systems protected by bilayers in dry environments.

Photoactivatable Surface-Functionalized Diatom Microalgae for Colorectal Cancer Targeted Delivery and Enhanced Cytotoxicity of Anticancer Complexes

Systemic toxicity and severe side effects are commonly associated with anticancer chemotherapies. New strategies based on enhanced drug selectivity and targeted delivery to cancer cells while leaving healthy tissue undamaged can reduce the global patient burden. Herein, we report the design, synthesis and characterization of a bio-inspired hybrid multifunctional drug delivery system based on diatom microalgae. The microalgae's surface was chemically functionalized with hybrid vitamin B12-photoactivatable molecules and the materials further loaded with highly active rhenium(I) tricarbonyl anticancer complexes. The constructs showed enhanced adherence to colorectal cancer (CRC) cells and slow release of the chemotherapeutic drugs. The overall toxicity of the hybrid multifunctional drug delivery system was further enhanced by photoactivation of the microalgae surface. Depending on the construct and anticancer drug, a 2-fold increase in the cytotoxic efficacy of the drug was observed upon light irradiation. The use of this targeted drug delivery strategy, together with selective spatial-temporal light activation, may lead to lower effective concentration of anticancer drugs, thereby reducing medication doses, possible side effects and overall burden for the patient.

Natural Diatom Biosilica as Microshuttles in Drug Delivery Systems

Unicellular diatom microalgae are a promising natural resource of porous biosilica. These microorganisms produce around their membrane a highly porous and extremely structured silica shell called frustule. Once harvested from living algae or from fossil sediments of diatomaceous earth, this biocompatible and non-toxic material offers an exceptional potential in the field of micro/nano-devices, drug delivery, theranostics, and other medical applications. The present review focused on the use of diatoms in the field of drug delivery systems, with the aim of presenting the different strategies implemented to improve the biophysical properties of this biosilica in terms of drug loading and release efficiency, targeted delivery, or site-specific binding capacity by surface functionalization. The development of composite materials involving diatoms for drug delivery applications is also described.

Programmable stimuli-responsive polypeptides for biomimetic synthesis of silica nanocomposites and enzyme self-immobilization

Bioinspired silicification is an attractive route for achieving unique silica nanocomposites. Herein, a novel, facile and inexpensive route for biosilica synthesis is developed using the stimuli-responsive elastin-like polypeptide (ELP). The ELP is precisely tailored to a silica-mineralizing peptide by programming it with lysine residues. The resulting cationic ELP[KV₈F-40] is purified in ultrahigh yield using a chromatography-free ITC purification technique based on thermal-responsive property. Excitingly, the specific activity of ELP is 40-fold higher than that of silaffin. Besides, efficient and strong entrapment of ELP is achieved with over 98% of immobilization yield and less than 2% of leakage. These imply that cationic ELP may be used as a bifunctional tag (purification and immobilization) for fusion protein. An enzyme (xylanase) is therefore chosen to genetically fuse to ELP. The ELP-fused xylanase is purified by ELP with high purity (~98%) and enables the rapid (within minutes) self-immobilization. The immobilization yield was greater than 95%, and the immobilized xylanases hardly leaked from the silica matrix, demonstrating high efficiency of the self-immobilization process. The strategy developed here may provide a new opportunity for fabricating functional silica nanocomposites in a feasible and inexpensive pathway, which will have great potentials in the field of biotechnology.

Effects of Silicon Compounds on Biomineralization, Osteogenesis, and Hard Tissue Formation

Bioinspired stem cell-based hard tissue engineering includes numerous aspects: The synthesis and fabrication of appropriate scaffold materials, their analytical characterization, and guided osteogenesis using the sustained release of osteoinducing and/or osteoconducting drugs for mesenchymal stem cell differentiation, growth, and proliferation. Here, the effect of silicon- and silicate-containing materials on osteogenesis at the molecular level has been a particular focus within the last decade. This review summarizes recently published scientific results, including material developments and analysis, with a special focus on silicon hybrid bone composites. First, the sources, bioavailability, and functions of silicon on various tissues are discussed. The second focus is on the effects of calcium-silicate biomineralization and corresponding analytical methods in investigating osteogenesis and bone formation. Finally, recent developments in the manufacturing of Si-containing scaffolds are discussed, including in vitro and in vivo studies, as well as recently filed patents that focus on the influence of silicon on hard tissue formation.

Characterization and Cytotoxicity Evaluation of a Marine Sponge Biosilica

Bone fractures characterize an important event in the medical healthcare, being related to traumas, aging, and diseases. In critical conditions, such as extensive bone loss and osteoporosis, the tissue restoration may be compromised and culminate in a non-union consolidation. In this context, the osteogenic properties of biomaterials with a natural origin have gained prominence. Particularly, marine sponges are promising organisms that can be exploited as biomaterials for bone grafts. Thus, the objectives of this study were to study the physicochemical and morphological properties of biosilica (BS) from sponges by using scanning electron microscopy, Fourier-transform infrared, X-ray diffraction (SEM, FTIR and XRD respectively), mineralization, and pH. In addition, tests on an osteoblast precursor cell line (MC3T3-E1) were performed to investigate its cytotoxicity and proliferation in presence of BS. Bioglass (BG) was used as gold standard material for comparison purposes. Sponge BS was obtained, and this fact was proven by SEM, FTIR, and XRD analysis. Calcium assay showed a progressive release of this ion from day 7 and a more balanced pH for BS was maintained compared to BG. Cytotoxicity assay indicated that BS had a positive influence on MC3T3-E1 cells viability and qRT-PCR showed that this material stimulated Runx2 and BMP4 gene expressions. Taken together, the results indicate a potential use of sponge biosilica for tissue engineering applications.

A Toolbox for the Synthesis of Multifunctionalized Mesoporous Silica Nanoparticles for Biomedical Applications

Mesoporous silica nanoparticles (MSNs) are considered as promising next-generation nanocarriers for health-related applications. However, their effectiveness mostly relies on their efficient and surface-specific functionalization. In this contribution, we explored different strategies for the rational multistep synthesis of functional MCM-48-type MSNs with selectively created active inner and/or external surfaces. Functional groups were first installed using a combination of (delayed) co-condensation and post-grafting procedures. Both amine [(3-aminopropyl)triethoxysilane (APTS)] and thiol [(3-mercaptopropyl)trimethoxysilane (MPTS)] silanes were used, in various addition sequences. Following this, the different platforms were further functionalized with polyethylene glycol and/or with a pro-chelate ligand used as a magnetic resonance imaging contrast agent (diethylenetriaminepentaacetic acid chelates) and/or loaded with quercetin and/or grafted with an organic dye (rhodamine). The efficiency of the multiple grafting strategies and the effects on the MSN carrier properties are presented. Finally, the colloidal stability of the different systems was evaluated in physiological media, and preliminary tests were performed to verify their drug release capability. The use of MPTS appeared beneficial when compared to APTS in delayed co-condensation procedures to preserve both selective distribution of the functional groups, reactive functionality, and pore ordering. Our results provide in-depth insights into the efficient design of (multi)functional MSNs and especially on the crucial role played by the sequence of step-by-step functionalization methods aiming to produce multipurpose and stable bioplatforms.

A review on electrochemical biosensing platform based on layered double hydroxides for small molecule biomarkers determination

The development of layered double hydroxides (LDHs), also known as anionic clays with uniform distribution of metal ions and facile exchangeability of intercalated anions, are now appealing an immense deal of attention in synthesis of multifunctional materials. In electrochemical biosensors, LDHs provide stable environment for immobilization of enzymes or other sensing materials and play crucial roles in development of clinical chemistry, point-of-care devices through analysis of various small molecule metabolites excreted by biological processes which in turn serve as molecular biomarkers for medical diagnostics. In this review, we summarize the recent development in fabrication of LDH based nanoarchitectures and their electrocatalytic applications in ultrasensitive in vitro determination of conventional biomarkers, i.e., H₂O₂, glucose, dopamine and other biomolecules. Moreover, detailed discussion has been compiled to differentiate electrochemical enzymatic and nonenzymatic biosensors, to evaluate useful concentration ranges of H₂O₂ and glucose for analytical circumstances and to distinguish tumorigenic and normal cells via quantifying the released H₂O₂ efflux from living cells. Here, we envision that electrochemical sensing platform based on structurally integrated LDH nanohybrids with highly conducting substrates will assist as diseases diagnostic probe further enhancing diagnosis as well as therapeutic window for chronic diseases. Finally, the perspective for fabrication and assembly of LDH electrode is proposed for the future innovation of electrochemical biosensors with high performance making them more reliable for in vitro diagnostics.

The Effect of Laminin Surface Modification of Electrospun Silica Nanofiber Substrate on Neuronal Tissue Engineering

In this study, we first synthesized a slow-degrading silica nanofiber (SNF2) through an electrospun solution with an optimized tetraethyl orthosilicate (TEOS) to polyvinyl pyrrolidone (PVP) ratio. Then, laminin-modified SNF2, namely SNF2-AP-S-L, was obtained through a series of chemical reactions to attach the extracellular matrix protein, laminin, to its surface. The SNF2-AP-S-L substrate was characterized by a combination of scanning electron microscopy (SEM), Fourier transform–infrared (FTIR) spectroscopy, nitrogen adsorption/desorption isotherms, and contact angle measurements. The results of further functional assays show that this substrate is a biocompatible, bioactive and biodegradable scaffold with good structural integrity that persisted beyond 18 days. Moreover, a synergistic effect of sustained structure support and prolonged biochemical stimulation for cell differentiation on SNF2-AP-S-L was found when neuron-like PC12 cells were seeded onto its surface. Specifically, neurite extensions on the covalently modified SNF2-AP-S-L were significantly longer than those observed on unmodified SNF and SNF subjected to physical adsorption of laminin. Together, these results indicate that the SNF2-AP-S-L substrate prepared in this study is a promising 3D biocompatible substrate capable of sustaining longer neuronal growth for tissue-engineering applications.

Hydrophilic and antimicrobial core–shell nanoparticles containing guanidine groups for ultrafiltration membrane modification

Physical blending is a common technique to improve the water flux and antifouling performance of ultrafiltration (UF) membranes. In the present work, a novel hydrophilic and antimicrobial core–shell nanoparticle was synthesized through the chemical grafting of poly(guanidine-hexamethylenediamine-PEI) (poly(GHPEI)) on the surface of silica nanoparticles (SNP). The synthesized core–shell nanoparticles, poly(GHPEI) functionalized silica nanoparticles (SNP@PG), were incorporated into polyethersulfone (PES) to fabricate hybrid UF membranes by a phase inversion process. The chemical composition, surface and cross section morphologies, hydrophilicity, water flux and protein rejection of the membranes were evaluated by a series of characterizations. Results show that the prepared PES/SNP@PG hybrid membrane exhibits not only improved water flux, which is around 2.6 times that of the pristine PES membrane, but also excellent resistance to organic fouling and biofouling.

Hydrophilic and antimicrobial core–shell nanoparticles containing guanidine groups (SNP@PG) were applied to fabricate membranes with improved water flux and fouling resistance.