Binary colloidal crystals (BCCs): Interactions, fabrication, and applications

Tailored Physicochemical Cues Direct Human Mesenchymal Stem Cell Differentiation through Epigenetic Regulation Using Colloidal Self-Assembled Patterns

The extracellular matrix (ECM) shapes the stem cell fate during differentiation by exerting relevant biophysical cues. However, the mechanism of stem cell fate decisions in response to ECM-backed complex biophysical cues has not been fully understood due to the lack of versatile ECMs. Here, we designed two versatile ECMs using colloidal self-assembly technology to probe the mechanisms of their effects on mechanotransduction and stem cell fate regulation. Binary colloidal crystals (BCC) with a hexagonally close-packed structure, composed of silica (5 μm) and polystyrene (0.4 μm) particles as well as a polydimethylsiloxane-embedded BCC (BCCP), were fabricated. They have defined surface chemistry, roughness, stiffness, ion release, and protein adsorption properties, which can modulate the cell adhesion, proliferation, and differentiation of human adipose-derived stem cells (hASCs). On the BCC, hASCs preferred osteogenesis at an early stage but showed a higher tendency toward adipogenesis at later stages. In contrast, the results of BCCP diverged from those of BCC, suggesting a unique regulation of ECM-dependent mechanotransduction. The BCC-mediated cell adhesion reduced the size of the focal adhesion complex, accompanying an ordered spatial organization and cytoskeletal rearrangement. This morphological restriction led to the modulation of mechanosensitive transcription factors, such as c-FOS, the enrichment of transcripts in specific signaling pathways such as PI3K/AKT, and the activation of the Hippo signaling pathway. Epigenetic analyses showed changes in histone modifications across different substrates, suggesting that chromatin remodeling participated in BCC-mediated mechanotransduction. This study demonstrates that BCCs are versatile artificial ECMs that can regulate human stem cells' fate through unique biological signaling, which is beneficial in biomaterial design and stem cell engineering.

Artificial tumor matrices and bioengineered tools for tumoroid generation

The tumor microenvironment (TME) is critical for tumor growth and metastasis. The TME contains cancer-associated cells, tumor matrix, and tumor secretory factors. The fabrication of artificial tumors, so-called tumoroids, is of great significance for the understanding of tumorigenesis and clinical cancer therapy. The assembly of multiple tumor cells and matrix components through interdisciplinary techniques is necessary for the preparation of various tumoroids. This article discusses current methods for constructing tumoroids (tumor tissue slices and tumor cell co-culture) for pre-clinical use. This article focuses on the artificial matrix materials (natural and synthetic materials) and biofabrication techniques (cell assembly, bioengineered tools, bioprinting, and microfluidic devices) used in tumoroids. This article also points out the shortcomings of current tumoroids and potential solutions. This article aims to promotes the next-generation tumoroids and the potential of them in basic research and clinical application.

Modeling the co-assembly of binary nanoparticles

In this work, we present a binary assembly model that can predict the co-assembly structure and spatial frequency spectra of monodispersed nanoparticles with two different particle sizes. The approach relies on an iterative algorithm based on geometric constraints, which can simulate the assembly patterns of particles with two distinct diameters, size distributions, and at various mixture ratios on a planar surface. The two-dimensional spatial-frequency spectra of the modeled assembles can be analyzed using fast Fourier transform analysis to examine their frequency content. The simulated co-assembly structures and spectra are compared with assembled nanoparticles fabricated using transfer coating method are in qualitative agreement with the experimental results. The co-assembly model can also be used to predict the peak spatial frequency and the full-width at half-maximum bandwidth, which can lead to the design of the structure spectra by selection of different monodispersed particles. This work can find applications in fabrication of non-periodic nanostructures for functional surfaces, light extraction structures, and broadband nanophotonics.

Enhancing the Activity of Surface Immobilized Antimicrobial Peptides Using Thiol-Mediated Tethering to Poly(ethylene glycol)

Considering the need for versatile surface coatings that can display multiple bioactive signals and chemistries, the use of more novel surface modification methods is starting to emerge. Thiol-mediated conjugation of biomolecules is shown to be quite advantageous for such purposes due to the reactivity and chemoselectivity of thiol functional groups. Herein, the immobilization of poly(ethylene glycol) (PEG) and antimicrobial peptides (AMPs) to silica colloidal particles based on thiol-mediated conjugation techniques, along with an assessment of the antimicrobial potential of the functionalized particles against Pseudomonas aeruginosa and Staphylococcus aureus is investigated. Immobilization of PEG to thiolated Si particles is performed by either a two-step thiol-ene "photo-click" reaction or a "one-pot" thiol-maleimide type conjugation using terminal acrylate or maleimide functional groups, respectively. It is demonstrated that both immobilization methods result in a significant reduction in the number of viable bacterial cells compared to unmodified samples after the designated incubation periods with the PEG-AMP-modified colloidal suspensions. These findings provide a promising outlook for the fabrication of multifunctional surfaces based upon the tethering of PEG and AMPs to colloidal particles through thiol-mediated biocompatible chemistry, which has potential for use as implant coatings or as antibacterial formulations that can be incorporated into wound dressings to prevent or control bacterial infections.

Structural Color Mixing in Microcapsules through Exclusive Crystallization of Binary and Ternary Colloids

Colloidal crystals are designed as photonic microparticles for various applications. However, conventional microparticles generally have only one stopband from a single lattice constant, which restricts the range of colors and optical codes available. Here, photonic microcapsules are created that contain two or three distinct crystalline grains, resulting in dual or triple stopbands that offer a wider range of colors through structural color mixing. To produce distinct colloidal crystallites from binary or ternary colloidal mixtures, the interparticle interaction is manipulated using depletion forces in double-emulsion droplets. Aqueous dispersions of binary or ternary colloidal mixtures in the innermost droplet are gently concentrated in the presence of a depletant and salt by imposing hypertonic conditions. Different-sized particles crystallize into their own crystals rather than forming random glassy alloys to minimize free energy. The average size of the crystalline grains can be adjusted with osmotic pressure, and the relative ratio of distinct grains can be controlled with the mixing ratio of particles. The resulting microcapsules with small grains and high surface coverage are almost optically isotropic and exhibit highly-saturated mixed structural colors and multiple reflectance peaks. The mixed color and reflectance spectrum are controllable with the selection of particle sizes and mixing ratios.

Bimodal nanolatexes prepared via polymerization-induced self-assembly: losing control in a controlled manner

In this paper we demonstrate the potential advantages of reproducible bimodal nanolatexes prepared by the combination of reversible addition–fragmentation chain-transfer (RAFT) polymerization with polymerization-induced self-assembly (PISA).

Binary Colloidal Crystals (BCCs) Modulate the Retina-related Gene Expression of hBMSCs – A Preliminary Study

Surface topography-induced lineage commitment of human bone marrow stem cells (hBMSCs) has been reported. However, this effect on hBMSC differentiation toward retinal pigment epithelium (RPE)-like cells has not been explored. Herein, a family of cell culture substrates called binary colloidal crystals (BCCs) was used to stimulate hBMSCs into RPE-like cells without induction factors. Two BCCs, named SiPS (silica (Si)/polystyrene (PS)) and SiPSC (Si/carboxylated PS), having similar surface topographies but different surface chemistry was used for cell culture. The result showed that cell proliferation was no difference between the two BCCs and tissue culture polystyrene (TCPS) control. However, the cell attachment, spreading area, and aspect ratio between surfaces were significantly changed. For example, cells displayed more elongated on SiPS (aspect ratio ~7.0) than those on SiPSC and TCPS (~2.0). The size of focal adhesions on SiPSC (~1.6 µm²) was smaller than that on the TCPS (~2.5 µm²). qPCR results showed that hBMSCs expressed higher RPE progenitor genes (i.e., MITF and PAX6) on day 15, and mature RPE genes (i.e., CRALBP and RPE65) on day 30 on SiPS than TCPS. On the other hand, the expression of optical vesicle or neuroretina genes (i.e., MITF and VSX2) was upregulated on day 15 on SiPSC compared to the TCPS. This study reveals that hBMSCs could be modulated into different cell subtypes depending on the BCC combinations. This study shows the potential of BCCs in controlling stem cell differentiation.

Shaping in the Third Direction; Fabrication of Hemispherical Micro-Concavity Array by Using Large Size Polystyrene Spheres as Template for Direct Self-Assembly of Small Size Silica Spheres

Silica and polystyrene spheres with a small size ratio (r = 0.005) form by sequential hanging drop self-assembly, a binary colloidal crystal through which calcination transforms in a silica-ordered concavity array. These arrays are capable of light Bragg diffraction and shape dependent optical phenomena, and they can be transformed into inverse-opal structures. Hierarchical 2D and 3D super-structures with ordered concavities as structural units were fabricated in this study.

Mild stratification in drying films of colloidal mixtures

Size stratification of bidisperse colloidal mixtures during vertical drying was investigated using the implicit solvent Langevin dynamics (LD) simulation and the explicit solvent lattice Boltzmann (LB) method. Simulations were performed for the Péclet number (Pe) over a wide range of 1-1000. In the case of a low size ratio of 2, mild stratification was observed in both simulation methods, in contrast to distinct stratification with thick "small-on-top" or "large-on-top" layers. The LD simulations exhibited a "small-on-top" stratification or mixed state. In contrast, the LB simulations exhibited a "large-on-top" or mixed state, according to the variation in Pe. The results demonstrated that the explicit solvent reduced the collective diffusion under moderate Pe conditions. This suppressed the steep concentration gradient of small particles in the packed region of particles near the air-solvent interface. Thus, distinguishable stratification patterns were obtained for the implicit and explicit solvent models.

Hybrid Surface Nanostructures Using Chemical Vapor Deposition and Colloidal Self-Assembled Patterns for Human Mesenchymal Stem Cell Culture—A Preliminary Study

Surface coatings are critical in biomaterials and biomedical devices. Chemical vapor deposition (CVD) is a well-known technology for the generation of thin films on a surface. However, the granular structures produced using CVD are rare. Recently, we used PPX-C, an excellent insulating material, for granular structure coating using CVD. Colloidal self-assembly is also a well-established method to generate granular structures named colloidal self-assembled patterns (cSAPs). In this study, we combined these two technologies to generate hierarchical granular structures and tested the biophysical effect of these hybrid surfaces on human bone marrow mesenchymal stem cells (hBMSCs). Two CVD-derived granular structures were made using water or glycerin droplets (i.e., CVD or GlyCVD surfaces). Water drops generate porous particles, while glycerin drops generate core–shell particles on the surface. These particles were dispersed randomly on the surface with sizes ranging from 1 to 20 μm. These CVD surfaces were hydrophobic (WCA ~ 80–110 degrees). On the other hand, a binary colloidal crystal (BCC), one type of cSAPs, composed of 5 μm Si and 400 nm carboxylated polystyrene (PSC) particles, had a close-packed structure and a hydrophilic surface (WCA ~ 45 degrees). The hybrid surfaces (i.e., CVD-BCC and GlyCVD-BCC) were smooth (Ra ~ 1.1–1.5 μm) and hydrophilic (WCA ~ 50 degrees), indicating a large surface coverage of BCC dominating the surface property. The hybrid surfaces were expected to be slightly negatively charged due to naturally charged CVD particles and negatively charged BCC particles. Cell adhesion was reduced on the hybrid surfaces, leading to an aggregated cell morphology, without reducing cell activity, compared to the flat control after 5 days. qPCR analysis showed that gene expression of type II collagen (COL2) was highly expressed on the GlyCVD-BCC without chemical induction after 3 and 14 days compared to the flat control. This proof-of-concept study demonstrates the potential of combining two technologies to make hybrid structures that can modulate stem cell attachment and differentiation.

Harnessing Focal Adhesions to Accelerate p53 Accumulation and Anoikis of A549 Cells Using Colloidal Self-Assembled Patterns (cSAPs)

Extracellular matrix (ECM) of the tumor microenvironment (TME), including topography and biological molecules, is crucial in cancer cell attachment, growth, and even the sensitivity to the chemo and cell drugs treatment. This study hypothesizes that mimic ECM structures can alter the attachment and drug sensitivity of cancer cells. A family of artificial ECM called colloidal self-assembled patterns (cSAPs) was fabricated to mimic tumor ECM structures. Cell adhesion, proliferation, and drug sensitivity of the A549 non-small cell lung cancer (NSCLC) cells were studied on 24 cSAPs, named cSAP#1-cSAP#24, where surface topography and wettability were distinct. The results showed that cell adhesion and cell spreading were generally reduced on cSAPs compared to the flat controls. In addition, the synergistic effect of cSAPs and several chemo drugs on cell survival was investigated. Interestingly, A549 cells were more sensitive to the combination of doxorubicin and cSAP#4. Under this condition, the focal adhesion kinase (FAK) signaling was downregulated while p53 signaling was upregulated, confirmed by real-time PCR and western blot analysis. It indicates that the specific surface structure could induce higher drug sensitivity and in vitro anoikis of A549 cells. A serum alternative, human platelet lysate (hPL), and different cSAPs were examined to verify our hypothesis. The result further confirmed that cell adhesion strongly affected the drug sensitivity of A549 cells. This study demonstrates that the tumor ECM is vital in cancer cell activity and drug sensitivity; therefore, it should be considered in drug discovery and therapeutic regimens.

Multifarious colloidal structures: new insight into ternary and quadripartite ordered assemblies

DNA-mediated assembly of colloidal particles can be utilized to produce a variety of structures which may have desirable phononic, photonic, or electronic transport properties. Recent developments in linker-mediated assembly processes allow for interactions to be coordinated between many different types of colloidal particles more easily and with fewer unique sequences than direct hybridization. However, the dynamics of colloidal self-assembly becomes increasingly more complex when coordinating interactions between three or more distinct interacting elements. In such cases particle pairs with similar binding energies are allowed to interact unpredictably, and enthalpically degenerate binding sites will be noticeably more present while numerous secondary phases may also result from the self-assembly process. Therefore, it is necessary to develop procedures for predicting feasible superstructure geometries for these systems before they can be implemented in material design. Here we investigate the formation of multifarious ordered structures through self-assembly of multiple types of spherically symmetrical colloidal particles with a variety of interaction matrices. We utilize Molecular Dynamics (MD) simulations to study the growth behavior of systems with different types of interacting elements and different particle sizes, and also predict the formation and stability of the target structures. We also study the phononic spectra of various ternary structures in order to identify the influence of key structural parameters on phonon bandgap frequencies and ranges. Our results provide direct guidelines for designing ternary and quadripartite multifarious colloidal structures, and motivate new directions for future experimental work to target formation of multi-component colloidal superstructures beyond the well-established binary symmetries studied in the past.

Shape control in seed-mediated synthesis of non-elongated Cu nanoparticles and their optical properties

Shape and surface chemistry control in copper nanoparticle synthesis is an important research area due to a wide range of developing applications of this material in catalysis, energy conversion, sensing and many others. In addition to being an inexpensive and abundant metal, copper is an attractive photocatalyst due to its optical properties in the visible range. Here, we report a facile, tunable and sustainable methodology for synthesizing Pd-seeded Cu nanoparticles with various shapes, including cubes, spheres, raspberry-like particles and cages stabilized with a bilayer of a cationic surfactant in aqueous media. The experimental and theoretical examination of the optical response in the series of synthesized nanoparticles revealed that the low-energy extinction peak is associated with electronic interband transitions in the metal, in contrast to a widely spread attribution of this peak to a plasmonic response in Cu nanoparticles.

Stiffening Effect of Fillers Based on Rheology and Micromechanics Models

The aggregate in an asphalt mixture is coated with mastic consisting of bitumen (dilute phase) and filler (particulates phase). The interaction of bitumen and filler and packing of filler plays an important role in the properties of mastics. The micromechanics models from composite rheology can be used to predict the stiffening effect of a suspension. In this research, the stiffening effect of fillers was investigated based on the rheology of mastic. The frequency sweep tests in a dynamic shear rheometer at different temperatures were performed within a linear viscoelastic range to construct the master curves. The volume fractions were expressed as compositional volumes of filler in mastic. The particle shape and surface texture are determined through microscopy. We used six micromechanics-based models to predict the stiffening potential of fillers in mastics. The models include Maron–Pierce, Lewis Nielsen, Mooney, Krieger–Dougherty, Chong, Robinson, and Hashin Models. The results show that the same volume content of filler has a different effective volume. The fillers increase the stiffening effect of the composite, especially at high temperatures. The behaviour of fillers with similar effective volume and packing is identical. The filler type affects the stiffening of mastics. Micromechanics modelling results show that most models show an accurate stiffening effect at lower concentrations with the exception of the Chong Model. The Maron–Pierce Model under-estimates the stiffening potential for granite mastic at higher concentrations beyond the 30% filler content fraction. The value of maximum packing fraction (ϕm) and Einstien coefficient (KE) in the Mooney model are significantly different from other models for limestone and granite, respectively. The line of equality graph shows good agreement of measured and predicted stiffness. It is difficult to precisely model the mastic data with any single model due to the presence of complex stiffening effects beyond volume filling.

Recent Advances in Binary Colloidal Crystals for Photonics and Porous Material Fabrication

In the past few years, binary colloidal crystals (BCCs) composed of both large and small particles have attracted considerable attention from the scientific community as an exciting alternative to single colloidal crystals (SCCs). In particular, more complex structures with diverse nanotopographies and desirable optical properties of BCCs can be obtained by various colloidal assembly methods, as compared to SCCs. Furthermore, high accuracy in crystal growth with controllable stoichiometries allows for a great deal of promising applications in the fields of both interfacial and material sciences. The visible-light diffraction property of BCCs is more superior than that of SCCs, which makes them have more promising applications in the fabrication of photonic crystals with full band gaps. On the other hand, their spherical shapes and ease of removal property make them ideal templates for ordered porous material fabrication. Hence, this perspective outlined recent advances in assembly approaches of BCCs, with an emphasis on their promising applications for advanced photonics and multifunctional porous material fabrication. Eventually, some challenging yet important issues and some future perspectives are further discussed.

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

Programming Colloidal Self-Assembled Patterns (cSAPs) into Thermo-Responsible Hybrid Surfaces for Controlling Human Stem Cells and Macrophages

Hybrid surfaces with tunable topography, chemistry, and stiffness have potential to rebuild native extracellular matrix (ECM) and manipulate cell behavior in vitro. However, the fabrication of controllable hybrid surfaces is still challenging. In this study, colloidal self-assembly technology was used to program particles into highly ordered structures with hybrid chemistry and stiffness at biointerfaces. These colloidal self-assembled patterns (cSAPs), including unary, binary, and ternary cSAPs, composed of silicon (Si), polystyrene (PS), and/or poly(N-isopropylacrylamide) (pNIPAM) nanogels (PNGs), were fabricated using either coassembly or layer-by-layer (LBL) methods. The selected binary cSAPs (i.e., PS/PNG and PNG/PS) have a tunable surface topography and wettability between 25 and 37 °C; thus, they can be used as dynamic cell culture substrates. Human adipose-derived mesenchymal stem cells (hASCs), bone marrow-derived mesenchymal stem cells (hBMSCs), and macrophages (THP-1) were investigated on these hybrid cSAPs under a static or dynamic system. The results showed that hybrid cSAPs significantly influenced the focal adhesions, cell morphology, cell migration, and gene expressions of stem cells. In general, stem cells had more vinculin puncta, smaller spreading size, and faster migration speed than the TCPS control. Hybrid cSAPs up-regulated gene expressions of focal adhesion kinase (FAK) and chondrocytes (AGG and SOX9) under static culture, while they also up-regulated osteocytes (COL1 and RUNX2) under dynamic culture. THP-1 macrophages were at M0 state on all cSAPs under static culture. However, cells became sensitive under dynamic culture. For example, some M1 genes (i.e., IL6, CD68, and TNFα) and M2 genes (i.e., IL10 and CD206) were down-regulated, while other M1 genes (i.e., IL1β) and M2 genes (i.e., TGF-β and IL1ra) were up-regulated, depending on the particle combinations. In conclusion, new hybrid cSAPs with thermoresponsive surface properties are versatile materials for stem cells and macrophages manipulation.

Crystal-to-Crystal Transitions in Binary Mixtures of Soft Colloids

In this article, we demonstrate a method for inducing reversible crystal-to-crystal transitions in binary mixtures of soft colloidal particles. Through a controlled decrease of salinity and increasingly dominating electrostatic interactions, a single sample is shown to reversibly organize into entropic crystals, electrostatic attraction-dominated crystals, or aggregated gels, which we quantify using microscopy and image analysis. We furthermore analyze crystalline structures with bond order analysis to discern between two crystal phases. We observe the different phases using a sample holder geometry that allows both in situ salinity control and imaging through confocal laser scanning microscopy and apply a synthesis method producing particles with high resolvability in microscopy with control over particle size. The particle softness provides for an enhanced crystallization speed, while altering the re-entrant melting behavior as compared to hard sphere systems. This work thus provides several tools for use in the reproducible manufacture and analysis of binary colloidal crystals.

Ex Vivo Expansion and Drug Sensitivity Profiling of Circulating Tumor Cells from Patients with Small Cell Lung Cancer

Simple Summary

Small cell lung cancer (SCLC) is an overly aggressive cancer characterized by rapid growth, early metastatic spread, and consequently reducing overall survival. As cancer manifestations can differ uniquely between various types, the rapid proliferation of circulating tumor cells (CTC) originating from SCLC was an adequate sample resource to aid the headway in our drug screening technique. With biomarker detection of liquid biopsy as an emerging tool to assist decision-making in personalized cancer pharmacotherapy. In this study, we developed a rapid and reproducible system for preclinical drug testing via the use of a unique CTCs expansion protocol. The expanded CTCs from SCLC formed multiple types of tumorsphere structures and expressed SCLC-specific tumor markers. The drug sensitivity assessment gathered from in vitro expansion of CTCs was able to generate positive clinical therapeutic outcomes. Thus, SCLC patient-derived CTC spheroids are a useful resource for biomarker development and drug sensitivity assessment providing “real-world” therapeutic response circumstances.

Abstract

Small cell lung cancer (SCLC) represents one of the most aggressive malignancies among cancer types. Not only tumor sample availability is limited, but also the ability for tumor cells to rapidly acquire drug resistance are the rate-limiting bottlenecks for overall survival in current clinical settings. A liquid biopsy capable of capturing and enriching circulating tumor cells (CTCs), together with the possibility of drug screening, is a promising solution. Here, we illustrate the development of a highly efficient ex vivo CTC expansion system based on binary colloidal crystals substrate. Clinical samples were enrolled from 22 patients with SCLC in the study. The CTCs were enriched and expanded from the collected peripheral blood samples. Expanded cells were analyzed for protein expression and observed for drug sensitivity with the use of immunofluorescence and ATP titer evaluation, respectively. Successful CTC spheroid proliferation was established after 4 weeks within 82% of all the collected peripheral blood samples from enrolled patients. Upon immunofluorescence analysis, the enriched cells showed positive markers for EpCAM, TTF-1, synaptophysin and negative for CD45. Additionally, the expanded CTCs demonstrated marked heterogeneity in the expression of E-cadherin and N-cadherin. In a preliminary case series, the drug sensitivity of patient-derived CTC to cisplatin and etoposide was studied to see the correlation with the corresponding therapeutic outcome. In conclusion, our study demonstrates that it is possible to efficiently expand CTCs from SCLC within a clinically relevant time frame; the biomarker information generated from enriched CTCs can assist the selection of effective drugs and improve disease outcome.

Protein-Based Nanostructures for Food Applications

Proteins are receiving significant attention for the production of structures for the encapsulation of active compounds, aimed at their use in food products. Proteins are one of the most used biomaterials in the food industry due to their nutritional value, non-toxicity, biodegradability, and ability to create new textures, in particular, their ability to form gel particles that can go from macro- to nanoscale. This review points out the different techniques to obtain protein-based nanostructures and their use to encapsulate and release bioactive compounds, while also presenting some examples of food grade proteins, the mechanism of formation of the nanostructures, and the behavior under different conditions, such as in the gastrointestinal tract.