Formation and assembly of amphiphilic Janus nanoparticles promoted by polymer interactions

Motion and Orientation of Janus Spherical Particles at a Liquid-Air Interface Governed by the Moses Effect

We investigated the motion of spherical polystyrene/polypyrrole-coated polystyrene Janus particles placed at an air/saline interface and driven by a permanent magnetic field of ca. 0.5 T. For the sake of comparison, the motion of pure floating polystyrene particles was studied. Both kinds of the studied particles moved toward the magnet and stopped at the boundary of the near-surface well produced by the magnetic field. The Moses effect-driven motion of floating Janus particles was analyzed and investigated under different strengths of the magnetic field and salt concentrations. The study of the Janus particle displacement led to the development of a unified theoretical framework explaining the mechanism of the motion. This framework predicts that the motion of particles placed at an air-salt solution interface is not only dictated by magnetic energy but also intricately influenced by the interplay of factors, including the curvature of the interface caused by the static magnetic field, gravitational potential, and capillary forces. The orientation of the particles was observed. A qualitative explanation of the observed phenomena is suggested. The investigated process has potential for the self-assembly of particles placed at the liquid/air interface.

Highly Ordered Nanoassemblies of Janus Spherocylindrical Nanoparticles Adhering to Lipid Vesicles

In recent years, there has been a heightened interest in the self-assembly of nanoparticles (NPs) that is mediated by their adsorption onto lipid membranes. The interplay between the adhesive energy of NPs on a lipid membrane and the membrane's curvature energy causes it to wrap around the NPs. This results in an interesting membrane curvature-mediated interaction, which can lead to the self-assembly of NPs on lipid membranes. Recent studies have demonstrated that Janus spherical NPs, which adhere to lipid vesicles, can self-assemble into well-ordered nanoclusters with various geometries, including a few Platonic solids. The present study explores the additional effect of geometric anisotropy on the self-assembly of Janus NPs on lipid vesicles. Specifically, the current study utilized extensive molecular dynamics simulations to investigate the arrangement of Janus spherocylindrical NPs on lipid vesicles. We found that the additional geometric anisotropy significantly expands the range of NPs' self-assemblies on lipid vesicles. The specific geometries of the resulting nanoclusters depend on several factors, including the number of Janus spherocylindrical NPs adhering to the vesicle and their aspect ratio. The lipid membrane-mediated self-assembly of NPs, demonstrated by this work, provides an alternative cost-effective route for fabricating highly engineered nanoclusters in three dimensions. Such structures, with the current wide range of material choices, have great potential for advanced applications, including biosensing, bioimaging, drug delivery, nanomechanics, and nanophotonics.

Biological Activities and Solubilization Methodologies of Naringin

Naringin (NG), a natural flavanone glycoside, possesses a multitude of pharmacological properties, encompassing anti-inflammatory, sedative, antioxidant, anticancer, anti-osteoporosis, and lipid-lowering functions, and serves as a facilitator for the absorption of other drugs. Despite these powerful qualities, NG's limited solubility and bioavailability primarily undermine its therapeutic potential. Consequently, innovative solubilization methodologies have received considerable attention, propelling a surge of scholarly investigation in this arena. Among the most promising solutions is the enhancement of NG's solubility and physiological activity without compromising its inherent active structure, therefore enabling the formulation of non-toxic and benign human body preparations. This article delivers a comprehensive overview of NG and its physiological activities, particularly emphasizing the impacts of structural modification, solid dispersions (SDs), inclusion compound, polymeric micelle, liposomes, and nanoparticles on NG solubilization. By synthesizing current research, this research elucidates the bioavailability of NG, broadens its clinical applicability, and paves the way for further exploration and expansion of its application spectrum.

Photo-Cross-Linked Polymeric Dispersants of Comb-Shaped Benzophenone-Containing Poly(ether amine)

Efficient dispersion of nanoparticles (NPs) is a crucial challenge in the preparation and application of composites that contain NPs, particularly in coatings, inks, and related materials. Physical adsorption and chemical modification are the two common methods used to disperse NPs. However, the former suffers from desorption, and the latter is more specific and has limited versatility. To address these issues, we developed a novel photo-cross-linked polymeric dispersant, comb-shaped benzophenone-containing poly(ether amine) (bPEA), using a one-pot nucleophilic/cyclic-opening addition reaction. The results demonstrated that the bPEA dispersant forms a dense and stable shell on the surface of pigment NPs through physical adsorption and subsequent chemical photo-cross-linking, which effectively overcome the drawbacks of the desorption occurred in physical adsorption and the specificity of the chemical modification. By means of the dispersing effect of bPEA, the obtained pigment dispersions show high solvent, thermal, and pH stability without flocculation during storage. Moreover, the NPs dispersants show good compatibility with screen printing, coating, and 3D printing, endowing the ornamental products with high uniformity, color fastness, and less color shading. These properties make bPEA dispersants ideal candidates in fabrication dispersions of other NPs.

Development of Janus Particles as Potential Drug Delivery Systems for Diabetes Treatment and Antimicrobial Applications

Janus particles have emerged as a novel and smart material that could improve pharmaceutical formulation, drug delivery, and theranostics. Janus particles have two distinct compartments that differ in functionality, physicochemical properties, and morphological characteristics, among other conventional particles. Recently, Janus particles have attracted considerable attention as effective particulate drug delivery systems as they can accommodate two opposing pharmaceutical agents that can be engineered at the molecular level to achieve better target affinity, lower drug dosage to achieve a therapeutic effect, and controlled drug release with improved pharmacokinetics and pharmacodynamics. This article discusses the development of Janus particles for tailored and improved delivery of pharmaceutical agents for diabetes treatment and antimicrobial applications. It provides an account of advances in the synthesis of Janus particles from various materials using different approaches. It appraises Janus particles as a promising particulate system with the potential to improve conventional delivery systems, providing a better loading capacity and targeting specificity whilst promoting multi-drugs loading and single-dose-drug administration.

Photodeformable Azo Polymer Janus Particles Obtained upon Nonsolvent-Induced Phase Separation and Asynchronous Aggregation

Photodeformable submicron Janus particles (JPs), containing an epoxy-based azo polymer (BP-AZ-CN) and poly(methyl methacrylate) (PMMA), were fabricated upon nonsolvent-induced phase separation. The formation of the JPs was induced by gradually adding deionized water into a tetrahydrofuran (THF) solution of both polymers. The results show that the two polymers start to precipitate from the solution at almost the same water content and immediately separate into two phases in each particle due to the strong incompatibility between the two components. After the nucleation, the sizes of the aggregates increase with increasing water content in the following growth stage. The amount of BP-AZ-CN molecules assembling into the aggregates is controlled by the water content in the medium, while the aggregation of PMMA molecules is a slow diffusion-controlled process due to the much higher molecular weight of this polymer. With a further increase in the water content in the dispersion medium, the swollen aggregates collapse to form JPs. Interestingly, when a dispersion with a water content of 50 vol % is diluted with a THF/H₂O mixture with the same water content, the shapes of the JPs are significantly modified and vitrified after removal of THF through evaporation. By increasing the dilution multiples adopted to dilute the intermediate dispersions, JPs with more asymmetric shapes are obtained due to the enhanced asynchronous aggregation. Ternary phase diagrams calculated according to the Flory-Huggins theory provide a semi-quantitative description and rationalization of the phase separation behavior related to the thermodynamic factors. The differences in the transport behavior and aggregation dynamics of the two polymers are also proven to be critical for the formation of the asymmetric structures. Upon irradiation, the BP-AZ-CN compartments of JPs exhibit remarkable elongation along the electric vibrational direction of a linearly polarized laser beam at a wavelength of 488 nm.

Amphiphilic PTB7-Based Rod-Coil Block Copolymer for Water-Processable Nanoparticles as an Active Layer for Sustainable Organic Photovoltaic: A Case Study

We synthetized a new rod-coil block copolymer (BCP) based on the semiconducting polymerpoly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}) (PTB7) and poly-4-vinylpyridine (P4VP), tailored to produce water-processable nanoparticles (WPNPs) in blend with phenyl-C71-butyric acid methyl ester (PC₇₁BM). The copolymer PTB7-b-P4VP was completely characterized by means of two-dimensional nuclear magnetic resonance (2D-NMR), matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry (MS), size-exclusion chromatography (SEC), and differential scanning calorimetry (DSC) to confirm the molecular structure. The WPNPs were prepared through an adapted miniemulsion approach without any surfactants. Transmission electron microscopy (TEM) images reveal the nano-segregation of two active materials inside the WPNPs. The nanostructures appear spherical with a Janus-like inner morphology. PTB7 segregated to one side of the nanoparticle, while PC₇₁BM segregated to the other side. This morphology was consistent with the value of the surface energy obtained for the two active materials PTB7-b-P4VP and PC₇₁BM. The WPNPs obtained were deposited as an active layer of organic solar cells (OSCs). The films obtained were characterized by UV-Visible Spectroscopy (UV-vis), atomic force microscopy (AFM), and grazing incidence X-ray diffraction (GIXRD). J-V characteristics of the WPNP-based devices were measured by obtaining a power conversion efficiency of 0.85%. Noticeably, the efficiency of the WPNP-based devices was higher than that achieved for the devices fabricated with the PTB7-based BCP dissolved in chlorinated organic solvent.

Janus nanoparticles: an efficient intelligent modern nanostructure for eradicating cancer

In the modern age, the struggle to generate appropriate bio-based materials and nano-scaled colloidal particulates for developed application domains, has already resulted in remarkable attempts in the advancement of regulated size and shape, anisotropy, and characteristics of nanostructures. The bottom-up development strategies of components are among the most important science areas throughout nanotechnology, in which the designed building blocks are often utilized to generate novel structures by random self-assembly. In biomedical applications, Janus nanoparticles (JNPs) are necessary. This is due to their effective stimulus-responsive properties, tunable structure, biocompatibility, containing two surfaces with various hydrophobic characteristics and distinct functional groups. Featuring two parts with differing hydrophobicity has been the most critical aspect of the Janus amphiphilic particles. Development of JNPs has been afforded, using imaging agents (e.g. gold (AU) for photoacoustic imaging processing (PAI), silver for surface-enhanced Raman scattering (SERS), and Fe₃O₄ and MnO₂ to magnetic resonance imaging (MRI)). It is also to be mentioned that a number of other properties become salient - properties such as integration imaging factors into JNPs (like quantum dots, fluorescent dyes), multiple imaging methods for screening and diagnosis application can indeed be accomplished. Janus nanostructures have been promising platforms for bioengineering as therapeutic carriers, drug delivery vehicles, and biosensor equipment; they may also be employed for the transport of bioactive hydrophilic and hydrophobic materials. The main production approaches and major advancement of JNPs in the biomedical sector and cancer therapy will be described in this paper.

Targeted Nanotherapeutics for Respiratory Diseases: Cancer, Fibrosis, and Coronavirus

Systemic delivery of therapeutics for treatment of lung diseases has several limitations including poor organ distribution of delivered payload with relatively low accumulation of active substances in the lungs and severe adverse side effects. In contrast, nanocarrier based therapeutics provide a broad range of opportunities due to their ability to encapsulate substances with different aqueous solubility, transport distinct types of cargo, target therapeutics specifically to the deceased organ, cell, or cellular organelle limiting adverse side effects and increasing the efficacy of therapy. Moreover, many nanotherapeutics can be delivered by inhalation locally to the lungs avoiding systemic circulation. In addition, nanoscale based delivery systems can be multifunctional, simultaneously carrying out several tasks including diagnostics, treatment and suppression of cellular resistance to the treatment. Nanoscale delivery systems improve the clinical efficacy of conventional therapeutics allowing new approaches for the treatment of respiratory diseases which are difficult to treat or possess intrinsic or acquired resistance to treatment. The present review summarizes recent advances in the development of nanocarrier based therapeutics for local and targeted delivery of drugs, nucleic acids and imaging agents for diagnostics and treatment of various diseases such as cancer, cystic fibrosis, and coronavirus.

How Does the Number of Arms Affect the Properties of Mikto-Arm Stars in a Selective Oligomeric Matrix? Insights from Atomistic Simulations

We present a simulation study of amphiphilic mikto-arm star copolymers in a selective polymer host. By means of atomistic molecular dynamics simulations, we examine the structural and dynamical properties of mikto-arm stars with varying number, n, of poly(ethylene oxide) (PEO) and polystyrene (PS) arms, (PEO) n (PS) n in a 33% wt blend with an oligomeric PEO host (o-PEO). As the number of arms increases, the stars resemble more spherical particles with less separated PEO and PS intramolecular domains. As a result of their internal morphology and associated geometrical constraints, the mikto-arm stars self-assemble either into cylindrical-like objects or a percolated network with increasing n, within the o-PEO matrix. The segmental dynamics is mostly governed by the star architecture and the heterogeneous local environment, formed by the intra- and intermolecular nanosegregation. We discuss the role of each factor and compare the results with previously published studies on mikto-arm stars.

Magnetic Nanoparticles in Cancer Therapy and Diagnosis

There is urgency for the development of nanomaterials that can meet emerging biomedical needs. Magnetic nanoparticles (MNPs) offer high magnetic moments and surface-area-to-volume ratios that make them attractive for hyperthermia therapy of cancer and targeted drug delivery. Additionally, they can function as contrast agents for magnetic resonance imaging (MRI) and can improve the sensitivity of biosensors and diagnostic tools. Recent advancements in nanotechnology have resulted in the realization of the next generation of MNPs suitable for these and other biomedical applications. This review discusses methods utilized for the fabrication and engineering of MNPs. Recent progress in the use of MNPs for hyperthermia therapy, controlling drug release, MRI, and biosensing is also critically reviewed. Finally, challenges in the field and potential opportunities for the use of MNPs toward improving their properties are discussed.

Dynamic Interfacial Trapping of Janus Nanorod Aggregates

Taking advantage of both shape and chemical anisotropy on the same nanoparticle offers rich self-assembly possibilities for nanotechnology. Through dissipative particle dynamics calculations, in the present work, the directed assembly of Janus nanorod aggregates and their capability to assemble into metastable novel structures at an interfacial level have been assessed. Symmetric Janus rods become kinetically trapped and exhibit either parallel or antiparallel alignment with respect to their long axis (different compositions). This depends on several factors that have been mapped herein and that can be precisely tuned: Flory-Huggins interaction parameter χ between polymer phases; concentration; shear rate; and even aggregate shape. Ultimately, two different aggregate structures result from rod tumbling that are not observed under quiescent conditions: monolayer-like aggregates exhibiting trapped rods with antiparallel configuration; and stacked nanorod arrays similar to superlattice sheets. These different structures can be controlled by the likelihood with which tumbling Janus rods encounter other aggregate portions showing parallel alignment. Hence, the present study offers fundamental insight into relevant parameters that govern the directed assembly of Janus nanoparticles at an interfacial level. Novel applications may potentially derive from the resulting aggregate structures, such as peculiar displays and sensors.

Dual-Functionalized Janus Mesoporous Silica Nanoparticles with Active Targeting and Charge Reversal for Synergistic Tumor-Targeting Therapy

Janus nanoparticles with an anisotropic feature concentrated multiple properties on a single carrier, providing synergistic effects. In this study, dual-functionalized Janus nanoparticles (HA-JMSN/DOX-DMMA) were constructed with a tumor-targeting ligand (hyaluronic acid, HA) modified on the one side and a charge reversal group (2,3-dimethylmaleic anhydride, DMMA) on the other side. The drug release of HA-JMSN/DOX-DMMA was positively correlated with the acidity of the environment. The cytotoxicity and cell uptake of HA-JMSN/DOX-DMMA were superior to the isotropous nanoparticles. The endocytosis pathway of HA-JMSN/DOX-DMMA involved the clathrin-mediated endocytosis (HA) and the micropinocytosis (DMMA) at the same time, which indicated that they both participated in the interaction between nanoparticles and tumor cells. After being injected intravenously in mice, the distribution of HA-JMSN/DOX-DMMA in tumor was enhanced significantly. The antitumor therapy study in vivo showed that HA-JMSN/DOX-DMMA inhibited tumor growth and improved the survival rate of tumor-bearing mice effectively. In general, HA-JMSN/DOX-DMMA could take the synergistic effect of active targeting and charge reversal to deliver drug in tumor cells and kill them efficiently, which was a promising antitumor nanodrug.