Recent advances in dopamine-based materials constructed via one-pot co-assembly strategy

Single-cell encapsulation systems for probiotic delivery: Armor probiotics

Functional foods or drugs based on probiotics have gained unprecedented attention and development due to the increasingly clear relationship between probiotics and human health. Probiotics can regulate intestinal microbiota, dynamically participating in various physiological activities to directly affect human health. Some probiotic-based functional preparations have shown great potential in treating multiple refractory diseases. Currently, the survival and activity of probiotic cells in complex environments in vitro and in vivo have taken priority, and various encapsulation systems based on food-derived materials have been designed and constructed to protect and deliver probiotics. However, traditional encapsulation technology cannot achieve precise protection for a single probiotic, which makes it unable to have a significant effect after release. In this case, single-cell encapsulation systems can be assembled based on biological interfaces to protect and functionalize individual probiotic cells, maximizing their physiological activity. This review discussed the arduous challenges of probiotics in food processing, storage, human digestion, and the commonly used probiotic encapsulation system. Besides, a novel technology of probiotic encapsulation was introduced based on single-cell coating, namely, "armor probiotics". We focused on the classification, structural design, and functional characteristics of armor coatings, and emphasized the essential functional characteristics of armor probiotics in human health regulation, including regulating intestinal health and targeted bioimaging and treatment of diseased tissues. Subsequently, the benefits, limitations, potential challenges, as well as future direction of armor probiotics were put forward. We hope this review may provide new insights and ideas for developing a single-cell probiotics encapsulating system.

Hectorite/Phenanthroline-Based Nanomaterial as Fluorescent Sensor for Zn Ion Detection: A Theoretical and Experimental Study

The development of fluorescent materials that can act as sensors for the determination of metal ions in biological fluids is important since they show, among others, high sensitivity and specificity. However, most of the molecules that are used for these purposes possess a very low solubility in aqueous media, and, thus, it is necessary to adopt some derivation strategies. Clay minerals, for example, hectorite, as natural materials, are biocompatible and available in large amounts at a very low cost that have been extensively used as carrier systems for the delivery of different hydrophobic species. In the present work, we report the synthesis and characterization of a hectorite/phenanthroline nanomaterial as a potential fluorescent sensor for Zn ion detection in water. The interaction of phenanthroline with the Ht interlaminar space was thoroughly investigated, via both theoretical and experimental studies (i.e., thermogravimetry, FT-IR, UV-vis and fluorescence spectroscopies and XRD measurements), while its morphology was imaged by scanning electron microscopy. Afterwards, the possibility to use it as sensor for the detection of Zn2+ ions, in comparison to other metal ions, was investigated through fluorescent measurements, and the stability of the solid Ht/Phe/Zn complex was assessed by different experimental and theoretical measurements.

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

Pleiotropic Nanostructures Built from l-Histidine Show Biologically Relevant Multicatalytic Activities

The essential amino acid histidine plays a central role in the manifestation of several metabolic processes, including protein synthesis, enzyme-catalysis, and key biomolecular interactions. However, excess accumulation of histidine causes histidinemia, which shows brain-related medical complications, and the molecular mechanism of such histidine-linked complications is largely unknown. Here, we show that histidine undergoes a self-assembly process, leading to the formation of amyloid-like cytotoxic and catalytically active nanofibers. The kinetics of histidine self-assembly was favored in the presence of Mg(II) and Co(II) ions. Molecular dynamics data showed that preferential noncovalent interactions dominated by H-bonds between histidine molecules facilitate the formation of histidine nanofibers. The histidine nanofibers induced amyloid cross-seeding reactions in several proteins and peptides including pathogenic Aβ1-42 and brain extract components. Further, the histidine nanofibers exhibited oxidase activity and enhanced the oxidation of neurotransmitters. Cell-based studies confirmed the cellular internalization of histidine nanofibers in SH-SY5Y cells and subsequent cytotoxic effects through necrosis and apoptosis-mediated cell death. Since several complications including behavioral abnormality, developmental delay, and neurological disabilities are directly linked to abnormal accumulation of histidine, our findings provide a foundational understanding of the mechanism of histidine-related complications. Further, the ability of histidine nanofibers to catalyze amyloid seeding and oxidation reactions is equally important for both biological and materials science research.

A Ti3C2 MXene-integrated near-infrared-responsive multifunctional porous scaffold for infected bone defect repair

Infected bone defect repair has long been a major challenge in orthopedic surgery. Apart from bacterial contamination, excessive generation of reactive oxygen species (ROS), and lack of osteogenesis ability also threaten the defect repair process. However, few strategies have been proposed to address these issues simultaneously. Herein, we designed and fabricated a near-infrared (NIR)-responsive, hierarchically porous scaffold to address these limitations in a synergetic manner. In this design, polymethyl methacrylate (PMMA) and polyethyleneimine (PEI) were used to fabricate the porous PMMA/PEI scaffolds via the anti-solvent vapor-induced phase separation (VIPS) process. Then, Ti3C2 MXenes were anchored on the scaffolds through the dopamine-assisted co-deposition process to obtain the PMMA/PEI/polydopamine (PDA)/MXene scaffolds. Under NIR laser irradiation, the scaffolds were able to kill bacteria through the direct contact-killing and synergetic photothermal effect of Ti3C2 MXenes and PDA. Moreover, MXenes and PDA also endowed the scaffolds with excellent ROS-scavenging capacity and satisfying osteogenesis ability. Our experimental results also confirmed that the PMMA/PEI/PDA/MXene scaffolds significantly promoted new bone formation in an infected mandibular defect model. We believe that our study provides new insights into the treatment of infected bone defects.

Initiation of Brain Extract Fibrillation and Effective Cellular Internalization of Tryptophan Fibrils Unveils Its Neurotoxicity Risk

Recent discoveries on the self-assembly of aromatic amino acids into amyloid-like neurotoxic nanostructures have initiated a quest to decode the molecular mechanisms for the initiation of neurodegeneration. Moreover, the multicomponent nature of the amyloid deposits still questions the existing and well-defined amyloid cascade hypothesis. Hence, deciphering the neurotoxicity of amyloid-like nanostructures of aromatic amino acids becomes crucial for understanding the etiology of amyloidogenesis. Here, we demonstrate the cellular internalization and consequential damaging effects of self-assembled amyloid-like tryptophan nanostructures on human neuroblastoma cells. The cell-damaging potential of tryptophan nanostructure seems to be facilitated via ROS generation, necrosis and apoptosis mediated cell death. Further, tryptophan nanostructures were found to be seeding competent conformers, which triggered aggressive aggregation of brain extract components. The early stage intermediate nanostructures possess a higher cross-seeding efficacy than the seeding potential of the matured tryptophan fibrils. In addition to the cell-damaging and cross-seeding effects, tryptophan fibrils were found to catalyze oxidation of neuromodulator dopamine. These findings add more insights into the specific role of tryptophan self-assembly during the pathogenesis of hypertryptophanemia and other amyloid-associated neurodegenerative complications.

Holmium (III)-doped multifunctional nanotheranostic agent for ultra-high-field magnetic resonance imaging-guided chemo-photothermal tumor therapy

Ultra-high-field (UHF) MRI has shown great advantages over low-field magnetic resonance imaging (MRI). Despite being the most commonly used MRI contrast agents, gadolinium chelates perform poorly in high magnetic fields, which significantly weakens their T1 intensity. In comparison, the rare element Holmium (Ho)-based nanoparticles (NPs) have demonstrated great potential as T2-weighted MRI contrast agents in UHF MRI due to their extremely short electron relaxation times (∼ 10-13s). In this study, a multifunctional nanotherapeutic probe was designed for UHF MRI-guided chemotherapy and photothermal therapy. The Ho (III)-doped mesoporous polydopamine (Ho-MPDA, HM) nanosphere was loaded with the chemotherapeutic drug mitoxantrone (MTO) and then coated with 4T1 cell membranes to enhance active targeting delivery to breast cancer. The prepared nanotherapeutic probe MTO@HMM@4T1 (HMM@T) exhibited good biocompatibility, high drug-loading capability and great potential as Ho (III)-based UHF MRI contrast agents. Moreover, the biodegradation of HMM@T in response to the intratumor pH and glutathione (GSH) promotes MTO release. Near-infrared (NIR) light irradiation of HM induced photothermal therapy and further enhanced drug release. Consequently, HMM@T effectively acted as an MRI-guided tumor-targeting chemo-photothermal therapy against 4T1 breast cancer. STATEMENT OF SIGNIFICANCE: Ultra-high-field (UHF) MRI has shown great advantages over low-field magnetic resonance imaging (MRI). Although gadolinium chelates are the most commonly used MRI contrast agents in clinical practice, they exhibit a significantly decreased T1 relaxivity at UHF. Holmium exhibits outstanding UHF magnetic resonance capabilities in comparison with gadolinium chelates currently used in clinic. Herein, a theranostic nanodrug (HMM@T) was designed for UHF MRI-guided chemo-photothermal therapy. The nanodrug possessed remarkable UHF T2 MRI properties (r2 = 152.13 mM-1s-1) and high drug loading capability of 18.4 %. The biodegradation of HMM@T NPs under triple stimulations of pH, GSH, and NIR led to an efficient release of MTO in tumor microenvironment. Our results revealed the potential of a novel UHF MRI-guided multifunctional nanosystem in cancer treatment.

Advancing Healthcare: Synergizing Biosensors and Machine Learning for Early Cancer Diagnosis

Cancer is a fatal disease and a significant cause of millions of deaths. Traditional methods for cancer detection often have limitations in identifying the disease in its early stages, and they can be expensive and time-consuming. Since cancer typically lacks symptoms and is often only detected at advanced stages, it is crucial to use affordable technologies that can provide quick results at the point of care for early diagnosis. Biosensors that target specific biomarkers associated with different types of cancer offer an alternative diagnostic approach at the point of care. Recent advancements in manufacturing and design technologies have enabled the miniaturization and cost reduction of point-of-care devices, making them practical for diagnosing various cancer diseases. Furthermore, machine learning (ML) algorithms have been employed to analyze sensor data and extract valuable information through the use of statistical techniques. In this review paper, we provide details on how various machine learning algorithms contribute to the ongoing development of advanced data processing techniques for biosensors, which are continually emerging. We also provide information on the various technologies used in point-of-care cancer diagnostic biosensors, along with a comparison of the performance of different ML algorithms and sensing modalities in terms of classification accuracy.

Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Simultaneous deposition of tannic acid derivative and covalent conjugation of poly(2-methyl-2-oxazoline) for the construction of antifouling coatings

Bacterial adhesion and subsequent colonization play an important role in the failure of biomedical implants and devices. Thus, development of a simple surface modification strategy to combat bacterial adhesion is highly desirable. In this work, "one-pot" fabrication of antifouling coatings based on simultaneous surface adhesion of trihydroxyphenyl and dihydroxyphenyl moieties of tannic acid (TA) derivative and covalent conjugation of hydrophilic poly(2-methyl-2-oxazoline) (PMOXA) was demonstrated. Surface co-depositions of TA/PMOXA hybrids of different TA derivative to PMOXA weight ratios and different molecular weights of PMOXA were conducted. The surface hydrophilicity and deposition universality on various substrates were investigated. The anti-bacterial and anti-platelet adhesion, as well as anti-biofilm formation abilities, of the TA/PMOXA-based coating were also studied. In vitro hemolysis and cytotoxicity, and in vivo biocompatibility of the TA/PMOXA-based coating were further evaluated. All the results indicate that the TA/PMOXA-based coating could be employed as an antifouling additive on biomedical implants and devices.

Restructuring the Interface of Silk-Polycaprolactone Biocomposites Using Rigid-Flexible Agents

Natural fiber-reinforced biocomposites with excellent mechanical and biological properties have attractive prospects for internal medical devices. However, poor interfacial adhesion between natural silk fiber and the polymer matrix has been a disturbing issue for such applications. Herein, rigid-flexible agents, such as polydopamine (PDA) and epoxy soybean oil (ESO), were introduced to enhance the interfacial adhesion between Antheraea pernyi (Ap) silk and a common medical polymer, polycaprolactone (PCL). We compared two strategies of depositing PDA first (Ap-PDA-ESO) and grafting ESO first (Ap-ESO-PDA). The rigid-flexible interfacial agents introduced multiple molecular interactions at the silk-PCL interface. The "Ap-PDA-ESO" strategy exhibited a greater enhancement in interfacial adhesion, and interfacial toughening mechanisms were proposed. This work sheds light on engineering strong and tough silk fiber-based biocomposites for biomedical applications.

Synergistic chemo-photothermal and ferroptosis therapy of polydopamine nanoparticles for esophageal cancer

Aim: To develop synergistic chemo-photothermal and ferroptosis therapy nanoparticles to improve the efficacy of treatment for esophageal cancer. Materials & methods: Fe₃O₄@PDA-HCPT nanoparticles (NPs) were constructed and characterized. Their synergistic antitumor effects were evaluated in EC1 and EC109 esophageal cancer cells as well as in esophageal cancer-bearing mice. Results: In vitro and in vivo experiments showed that Fe₃O₄@PDA-HCPT NPs exhibited significant tumor inhibition and excellent diagnostic properties. The killing ability of tumor cells was significantly enhanced after irradiation. Conclusion: Synergistic application of the three therapies effectively inhibited tumor growth and exhibited potent antitumor effects, providing strong support for developing nanoparticles with synergistic antitumor effects of multiple therapies.

Flexible Recyclable Cellulose Paper Templated Cu-Doped Polydopamine Membranes with Dual Enzyme-Like Activity

The development of high-efficiency enzyme mimics is of great significance in the field of biocatalysis. However, it remains challenging to design novel enzyme mimics with multiple enzyme-like activities, excellent stability, and good reusability. Herein, a facile molecular assembly strategy to construct dialdehyde cellulose (DAC) templated Cu-doped polydopamine (DAC@PDA/Cu) membrane with dual enzyme-like activities is presented. The Schiff base bonds formed between polydopamine (PDA) and DAC can not only accelerate the adhesion of PDA thin layer but also contribute to Cu-loading and high stability of DAC@PDA/Cu membrane. Importantly, the assembled DAC@PDA/Cu membrane exhibits a remarkable catalytic activity that is superior to the natural laccase along with high stability and excellent reusability. Moreover, the DAC@PDA/Cu membrane also demonstrates peroxidase-like activity, and it is successfully applied in the sensitive detection of ascorbic acid (AA). This work will provide a new paradigm methodology for rational design and practical applications of enzyme mimics based on bioinspired molecular assemblies.

Polydopamine at biological interfaces

In the last years coating of surfaces in the presence of dopamine or other catecholamines in oxidative conditions to yield "polydopamine" films has become a popular, easy and versatile coating methodology. Polydopamine(s) offer(s) also a rich chemistry allowing to post-functionalize the obtained coatings with metal nanoparticles with polymers and proteins. However, the interactions either of covalent or non-covalent nature between polydopamine and biomolecules has only been explored more recently. They allow polydopamine to become a material, in the form of nanoparticles, membranes and other assemblies, in its own right not just as a coating. It is the aim of this review to describe the most recent advances in the design of composites between polydopamine and related eumelanin like materials with biomolecules like proteins, nucleotides, oligosaccharides and lipid assemblies. Furthermore, the interactions between polydopamine and living cells will be also reported.