CO2/CH4 and CH4/N2 separation on isomeric metal organic frameworks

Exceptional capture of methane at low pressure by an iron-based metal-organic framework

The selective capture of methane (CH4) at low concentrations and its separation from N2 are extremely challenging owing to the weak host-guest interactions between CH4 molecules and any sorbent material. Here, we report the exceptional adsorption of CH4 at low pressure and the efficient separation of CH4/N2 by MFM-300(Fe). MFM-300(Fe) shows a very high uptake for CH4 of 0.85 mmol g-1 at 1 mbar and 298 K and a record CH4/N2 selectivity of 45 for porous solids, representing a new benchmark for CH4 capture and CH4/N2 separation. The excellent separation of CH4/N2 by MFM-300(Fe) has been confirmed by dynamic breakthrough experiments. In situ neutron powder diffraction, and solid-state nuclear magnetic resonance and diffuse reflectance infrared Fourier transform spectroscopies, coupled with modelling, reveal a unique and strong binding of CH4 molecules involving Fe-OH⋯CH4 and C⋯phenyl ring interactions within the pores of MFM-300(Fe), thus promoting the exceptional adsorption of CH4 at low pressure.

Non-CO2 greenhouse gas separation using advanced porous materials

Global warming has become a growing concern over decades, prompting numerous research endeavours to reduce the carbon dioxide (CO2) emission, the major greenhouse gas (GHG). However, the contribution of other non-CO2 GHGs including methane (CH4), nitrous oxide (N2O), fluorocarbons, perfluorinated gases, etc. should not be overlooked, due to their high global warming potential and environmental hazards. In order to reduce the emission of non-CO2 GHGs, advanced separation technologies with high efficiency and low energy consumption such as adsorptive separation or membrane separation are highly desirable. Advanced porous materials (APMs) including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), porous organic polymers (POPs), etc. have been developed to boost the adsorptive and membrane separation, due to their tunable pore structure and surface functionality. This review summarizes the progress of APM adsorbents and membranes for non-CO2 GHG separation. The material design and fabrication strategies, along with the molecular-level separation mechanisms are discussed. Besides, the state-of-the-art separation performance and challenges of various APM materials towards each type of non-CO2 GHG are analyzed, offering insightful guidance for future research. Moreover, practical industrial challenges and opportunities from the aspect of engineering are also discussed, to facilitate the industrial implementation of APMs for non-CO2 GHG separation.

Influence of ligands within Al-based metal-organic frameworks for selective separation of methane from unconventional natural gas

Efficient CH₄/N₂ separation from unconventional natural gas is vital for both energy recycling and climate change control. Figuring out the reason for the disparity between ligands in the framework and CH₄ is the crucial problem for developing adsorbents in PSA progress. In this study, a series of eco-friendly Al-based MOFs, including Al-CDC, Al-BDC, CAU-10, and MIL-160, were synthesized to investigate the influence of ligands on CH₄ separation through experimental and theoretical analyses. The hydrothermal stability and water affinity of synthetic MOFs were explored through experimental characterization. The active adsorption sites and adsorption mechanisms were investigated via quantum calculation. The results manifested that the interactions between CH₄ and MOFs materials were affected by the synergetic effects of pore structure and ligand polarities, and the disparities of ligands within MOFs determined the separation efficiency of CH₄. Especially, the CH₄ separation performance of Al-CDC with high sorbent selection (68.56), moderate isosteric adsorption heat for CH₄ (26.3 kJ/mol), and low water affinity (0.1 g/g at 40% RH) was superior to most porous adsorbents, which was attributed to its nanosheet structure, proper polarity, reduced local steric hindrance, and extra functional groups. The analysis of active adsorption sites indicated that hydrophilic carboxyl groups and hydrophobic aromatic ring were the dominant CH₄ adsorption sites for liner ligands and bent ligands, respectively. The methylene groups with saturated C-H bonds enhanced the wdV interaction between ligands and CH₄, resulting in the highest binding energy of CH₄ for Al-CDC. The results provided valuable guidance for the design and optimization of high-performance adsorbents for CH₄ separation from unconventional natural gas.

Enhancing CH4 Capture from Coalbed Methane through Tuning van der Waals Affinity within Isoreticular Al-Based Metal-Organic Frameworks

Efficient separation of the CH₄/N₂ mixture is of great significance for coalbed methane purification. It is an effective strategy to separate this mixture by tuning the van der Waals interaction due to the nonpolar properties of CH₄ and N₂ molecules. Herein, we prepared several isoreticular Al-based metal-organic frameworks (MOFs) with different ligand sizes and polarities because of their high structural stability and low cost/toxicity feature of Al metal. Adsorption experiments indicated that the CH₄ uptake, Q_st of CH₄, and CH₄/N₂ selectivity are in the order of Al-FUM-Me (27.19 cm³(STP) g^-1, 24.06 kJ mol^-1 and 8.6) > Al-FUM (20.44 cm³(STP) g^-1, 20.60 kJ mol^-1 and 5.1) > Al-BDC (15.98 cm³(STP) g^-1, 18.81 kJ mol^-1 and 3.4) > Al-NDC (10.86 cm³(STP) g^-1, 14.89 kJ mol^-1 and 3.1) > Al-BPDC (5.90 cm³(STP) g^-1, 11.75 kJ mol^-1 and 2.2), confirming the synergetic effects of pore sizes and pore surface polarities. Exhilaratingly, the ideal adsorbed solution theory selectivity of Al-FUM-Me is higher than those of all zeolites, carbon materials, and most water-stable MOF materials (except Al-CDC and Co₃(C₄O₄)₂(OH)₂), which is comparable to MIL-160. Breakthrough results demonstrate its excellent separation performance for the CH₄/N₂ mixture with good regenerability. The separation mechanism of Al-FUM-Me for the CH₄/N₂ mixture was elucidated by theoretical calculations, showing that the stronger affinity of CH₄ can be attributed to its relatively shorter interaction distance with adsorption binding sites. Therefore, this work not only offers a promising candidate for CH₄/N₂ separation but also provides valuable guidance for the design of high-performance adsorbents.

Self-Interpenetrated Water-Stable Microporous Metal-Organic Framework toward Storage and Purification of Light Hydrocarbons

Storage and purification of light hydrocarbons are very meaningful for their high-purity requirements and safety utilization in the fields of industry and clean energy. It is a simple and effective way to achieve this goal utilizing the physical adsorption properties of stable porous metal-organic frameworks (MOFs). In this work, a stable self-interpenetrated three-dimensional MOF with a new 3,4-connected topology, {[Zn₂(tpda)₂(4,4'-bpy)]·4DMF}_n (NKM-101; H₂tpda = 4,4'-[4-(4H-1,2,4-triazol-4-yl)phenyl]dibenzoic acid, 4,4'-bpy = 4,4'-bipyridine, and DMF = N,N-dimethylformamide), has been successfully constructed based on a triazole-carboxyl ligand. The dense functional active sites existing on the inner walls of one-dimensional channels of NKM-101 are beneficial to enhancement of the binding affinities between the framework and specific molecules (CO₂, C₂-C₄). Therefore, the selective adsorption and separation performance of the material on CO₂/CH₄ and C₂-C₄/CH₄ are effectively improved. In addition, NKM-101 also exhibits excellent water stability, making it possible to be a practical material for the storage and purification of light hydrocarbons.

Microporous Metal-Organic Frameworks with Hydrophilic and Hydrophobic Pores for Efficient Separation of CH4/N2 Mixture

Highly selective removal of N₂ from unconventional natural gas is considered as a viable way to increase the heat value of CH₄ and reduce the greenhouse effect caused by the direct emission of CH₄/N₂ mixture. In this work, a three-dimensional Cu-MOF with two different types of micropores was synthesized, exhibiting a high selectivity for CH₄/N₂ (10.00-12.67) and the highest sorbent selection parameter value (65.73) among the reported materials. The CH₄ molecule interacts with the framework to form multiple van der Waals interactions both in hydrophilic and hydrophobic pores, indicated by density functional theory calculations to gain a deep insight into the adsorption binding sites. In contrast, the weak polarity feature of the hydrophobic pore and the occupied open-metal sites in the hydrophilic pore result in a very low adsorption uptake of N₂. The excellent separation performance combining the good stability and regenerability guarantees this Cu-MOF to be a promising adsorbent for an efficient separation of the CH₄/N₂ mixture.