Modification of CaO-based sorbents prepared from calcium acetate for CO 2 capture at high temperature

Green Ca-source of cockle shells converted to calcium acetate for environmental sustainability

This work aimed to synthesize and characterize the calcium acetate monohydrate (Ca(CH3COO)2·H2O) from the exothermic reaction between CaCO3 powder derived from cockle shells with three different acetic acids (8, 10, and 12 mol L-1) concentrations by the rapid and easy process without pH and temperature control to lead to cheap chemical production. The physicochemical characteristics of all synthesized Ca(CH3COO)2·H2O samples are investigated based on the chemical compositions, crystal structures, vibrational characteristics, morphologies, and thermal behavior to confirm the target compound. A suitable concentration of 10 mol L-1 CH3COOH was chosen to produce Ca(CH3COO)2·H2O with the highest yield (96.30 %), maximum calcium content (96.2 % CaO) with lower impurities, and time consumption of 17 h. The calcium acetate product obtained from cockle shells in this work shows differences in thermal stability, morphological structure purity, %yield, and metal contamination with those reported obtained from other sources and another shell type in the previous work. This research investigates the transformation of cockle shell waste into CaCO3 for the production of calcium acetate, aiming to address environmental sustainability concerns by reducing the use of calcium ore resources and greenhouse gas emissions.

Simple and Rapid Synthesis of Calcium Acetate from Scallop Shells to Reduce Environmental Issues

The search for sustainable resources remains a subject of global interest. Calcium acetate used in many fields was prepared using waste scallop shell as a raw material, and its physicochemical properties were investigated. The waste scallop shells were transformed to calcium acetate compounds by reactions with four acetic acid concentrations at ambient temperature until the completely dried powder is obtained. The maximum yield of 87% with short reaction time at a low temperature was observed in the reaction of 60%w/w acetic acid with scallop shells. Thermal transformation reactions of all prepared calcium acetate samples revealed temperature conditions for heating to produce other advanced materials. FTIR and XRD results confirmed the purity and solid phase of all prepared calcium acetate samples, and they were compared with those of literatures and found to be well consistent. The obtained timber-like particles have different sizes depending on the acetic acid concentration. This work reports an easy and low-cost method with no environmental effect to produce cheap calcium products to be used in the industry.

Simultaneous CO2 capture and heat storage by a Ca/Mg-based composite in coupling calcium looping and CaO/Ca(OH)2 cycles using air as a heat transfer fluid

The Ca/Mg-based composite prepared from carbide slag and dolomite is efficient for simultaneous CO₂ capture and heat storage.

Materials and logistics for carbon dioxide capture, storage and utilization

The efforts to curtail carbon dioxide presence in the atmosphere are a strong function of the available technologies to capture, store and usefully utilize it. Materials with adequate CO₂ sorption kinetics that are both effective and economical are of prime importance for the whole capture system to be built around. This work identifies such materials that are currently used in CO₂ adsorption beds/columns at different global locations, along with their vital operational parameters, logistics and costs. Three main classes of materials currently in use to that end are discussed in detail here, namely solid sorbents, advanced solvents membrane systems. These materials are then compared in terms of their potential CO₂ uptake, operating parameters and ease of use and implementation of the respective technology. Tabular data are appended to each technology covered with the most relevant advantages and disadvantages. With such comprehensive survey of the recent state-of-the-art materials, recommendations are also made to facilitate the selection of systems based on their CO₂ yield, price and suitability to the geographical location.

Reactivity Improvement of Ca-Based CO2 Absorbent Modified with Sodium Humate in Cyclic Calcination/Carbonation

The Ca-based sorbent cyclic calcination/carbonation reaction (CCCR) is a high-efficiency technique for capturing CO₂ from combustion processes. The CO₂ capture ability of CaO modified with sodium humate (HA-Na) (HA-Na/CaO) in long-term calcination/carbonation cycles was investigated. The enhancement mechanism of HA-Na on CCCR was proposed and demonstrated. The effects of carbonation temperature, reaction duration, and the addition amount of HA-Na on the carbonation rate of the CaO adsorbent were also studied. HA-Na/CaO is allowed to react 20 min at the optimum conditions for calcination (920 °C, 100% N₂) and for carbonation (700 °C, 15% CO₂, 85% N₂), respectively. HA-Na plays a key role in the CCCR process, and the carbonation conversion rate is lifted obviously. The maximum conversion rate of HA-Na/CaO is 23% higher than that of CaO in the first cycle. After 20 cycles, the conversion rate of HA-Na/CaO is still 0.28, while that of CaO is only 0.15. The carbonation conversion rate for HA-Na/CaO is improved by 86% compared to CaO. In addition, the characteristics of calcined sorbents are analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) methods.