Analytical and clinical validation of a dried blood spot assay for the determination of paclitaxel using high-performance liquid chromatography-tandem mass spectrometry

Liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) methods for the therapeutic drug monitoring of cytotoxic anticancer drugs: An update

In the era of precision medicine, there is increasing evidence that conventional cytotoxic agents may be suitable candidates for therapeutic drug monitoring (TDM)- guided drug dosage adjustments and patient's tailored personalization of non-selective chemotherapies. To that end, many liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) assays have been developed for the quantification of conventional cytotoxic anticancer chemotherapies, that have been comprehensively and critically reviewed. The use of stable isotopically labelled internal standards (IS) of cytotoxic drugs was strikingly uncommon, accounting for only 48 % of the methods found, although their use could possible to suitably circumvent patients' samples matrix effects variability. Furthermore, this approach would increase the reliability of cytotoxic drug quantification in highly multi-mediated cancer patients with complex fluctuating pathophysiological and clinical conditions. LC-MS/MS assays can accommodate multiplexed analyses of cytotoxic drugs with optimal selectivity and specificity as well as short analytical times and, when using stable-isotopically labelled IS for quantification, provide concentrations measurements with a high degree of certainty. However, there are still organisational, pharmacological, and medical constraints to tackle before TDM of cytotoxic drugs can be more largely adopted in the clinics for contributing to our ever-lasting quest to improve cancer treatment outcomes.

Paclitaxel and Therapeutic Drug Monitoring with Microsampling in Clinical Practice

Paclitaxel is an anticancer agent efficacious in various tumors. There is large interindividual variability in drug plasma concentrations resulting in a wide variability in observed toxicity in patients. Studies have shown the time the concentration of paclitaxel exceeds 0.05 µM is a predictive parameter of toxicity, making dose individualization potentially useful in reducing the adverse effects. To determine paclitaxel drug concentration, a venous blood sample collected 24 h following the end of infusion is required, often inconvenient for patients. Alternatively, using a microsampling device for self-sampling would facilitate paclitaxel monitoring regardless of the patient's location. We investigated the feasibility of collecting venous and capillary samples (using a Mitra® device) from cancer patients to determine the paclitaxel concentrations. The relationship between the venous plasma and whole blood and venous and capillary blood (on Mitra®) paclitaxel concentrations, defined by a Passing-Bablok regression, were 0.8433 and 0.8569, respectively. Demonstrating a clinically acceptable relationship between plasma and whole blood paclitaxel concentration would reduce the need to establish new target concentrations in whole blood. However, in this study, comparison of venous and capillary blood using Mitra® for sampling displayed wide confidence intervals suggesting the results from the plasma and whole blood on this device may not be interchangeable.

Biological Fluid Microsampling for Therapeutic Drug Monitoring: A Narrative Review

Therapeutic drug monitoring (TDM) is a specialized area of laboratory medicine which involves the measurement of drug concentrations in biological fluids with the aim of optimizing efficacy and reducing side effects, possibly modifying the drug dose to keep the plasma concentration within the therapeutic range. Plasma and/or whole blood, usually obtained by venipuncture, are the "gold standard" matrices for TDM. Microsampling, commonly used for newborn screening, could also be a convenient alternative to traditional sampling techniques for pharmacokinetics (PK) studies and TDM, helping to overcome practical problems and offering less invasive options to patients. Although technical limitations have hampered the use of microsampling in these fields, innovative techniques such as 3-D dried blood spheroids, volumetric absorptive microsampling (VAMS), dried plasma spots (DPS), and various microfluidic devices (MDS) can now offer reliable alternatives to traditional samples. The application of microsampling in routine clinical pharmacology is also hampered by the need for instrumentation capable of quantifying analytes in small volumes with sufficient sensitivity. The combination of microsampling with high-sensitivity analytical techniques, such as liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS), is particularly effective in ensuring high accuracy and sensitivity from very small sample volumes. This manuscript provides a critical review of the currently available microsampling devices for both whole blood and other biological fluids, such as plasma, urine, breast milk, and saliva. The purpose is to provide useful information in the scientific community to laboratory personnel, clinicians, and researchers interested in implementing the use of microsampling in their routine clinical practice.

Dried blood spot sampling for therapeutic drug monitoring: challenges and opportunities

INTRODUCTION

The use of dried blood spots (DBS) has gained interest in the field of therapeutic drug monitoring (TDM) due to its potential advantages, such as minimally invasive capillary blood collection, potential stabilization of drugs and metabolites at room or high temperatures, and lower biohazard, allowing for inexpensive storage and transportation. However, there are several drawbacks to the clinical use of DBS in TDM, mostly related to hematocrit (Hct) effects, differences between venous and capillary blood concentrations, among others, that must be evaluated during analytical and clinical method validation.

AREA COVERED

This review focuses on the most recent publications on the applications of DBS sampling for TDM (2016-2022), with a special focus on the challenges presented by this alternative sampling strategy, as well as the opportunities for clinical applications. Real-life studies presenting clinical applications were reviewed.

EXPERT OPINION

With the availability of method development and validation guidelines for DBS-based methods in TDM, higher levels of assay validation standardization have been achieved, expanding the clinical applications of DBS sampling in patient care. New sampling devices that overcome the limitations of classical DBS, such as the Hct effects, will further encourage the use of DBS in routine TDM.

A cellulose-based temperature sensitivity molecular imprinted hydrogel for specific recognition and enrichment of paclitaxel

A microcrystalline cellulose-based temperature sensitivity paclitaxel molecular imprinted hydrogel (MCC-TSMIHs-PTX) was successfully prepared by temperature-sensitive monomer N-isopropylacrylamide, functional monomer 4-vinylpyridine, cross-linking agent N, N'-methylenebisacrylamide and microcrystalline cellulose. They showed imprinting effective responses to the temperature changes. The results of adsorption kinetics, adsorption equilibrium, thermodynamics, selectivity and reusability showed the successful formation of a grafting thermosensitivity hydrogel with higher adsorption capacity and specific recognition. When the temperature reached 308 K, imprinting effect of hydrogel cavities would be most effective and conducive to capture template molecules. When the temperature reached 288 K, the lowest imprinting effect would facilitate the desorption of PTX. Finally, the MCC-TSMIHs-PTX was applied to enrich the paclitaxel in Taxus × media extracts samples, the relative contents of PTX in the samples were increased greatly from 7.23% to 78.32%, indicating the MCC-TSMIHs-PTX was a stable adsorption capacity for efficient separation and enrichment of PTX in Taxus × media extracts.

Dried Blood Spot Technique Applied in Therapeutic Drug Monitoring of Anticancer Drugs: a Review on Conversion Methods to Correlate Plasma and Dried Blood Spot Concentrations

BACKGROUND

Anticancer drugs are notoriously characterized by a low therapeutic index, the introduction of therapeutic drug monitoring (TDM) in oncologic clinical practice could therefore be fundamental to improve treatment efficacy. In this context, an attractive technique to overcome the conventional venous sampling limits and simplify TDM application is represented by dried blood spot (DBS). Despite the significant progress made in bioanalysis exploiting DBS, there is still the need to tackle some challenges that limit the application of this technology: one of the main issues is the comparison of drug concentrations obtained from DBS with those obtained from reference matrix (e.g., plasma). In fact, the use of DBS assays to estimate plasma concentrations is highly dependent on the chemical-physical characteristics of the measured analyte, in particular on how these properties determine the drug partition in whole blood.

METHODS

In the present review, we introduce a critical investigation of the DBS-to-plasma concentration conversion methods proposed in the last ten years and applied to quantitative bioanalysis of anticancer drugs in DBS matrix. To prove the concordance between DBS and plasma concentration, the results of statistical tests applied and the presence or absence of trends or biases were also considered.

HPLC methods for quantifying anticancer drugs in human samples: A systematic review

Pharmacokinetic (PK) study of anticancer drugs in cancer patients is highly crucial for dose selection and dosing intervals in clinical applications. Once an anticancer drug is administered, it undergoes various metabolic pathways; to determine these pathways, it is necessary to follow the administered drug in biological samples via different analytical methods. In addition, multi-drug quantification methods in patients undergoing multi-drug regimens of cancer therapy can have several benefits, such as reduced sampling time and analysis costs. In order to collect and categorize these studies, we conducted a systematic review of HPLC methods reported for the analysis of anticancer drugs in biological samples. A systematic search was performed on PubMed Medline, Scopus, and Web of Science databases, and 116 studies were included. In summary of included studies, when the objective of a method was to quantify a single drug, MS, or UV detectors were utilized equivalently. On the other hand, in methods with the aim of quantifying drug and metabolite(s) in a single run, MS detectors were the most utilized. This review can provide a comprehensive insight for researchers prior to developing a quantification method and selecting a detector.

A review of recent advances in microsampling techniques of biological fluids for therapeutic drug monitoring

Conventional sampling of biological fluids often involves a bulk quantity of samples that are tedious to collect, deliver and process. Miniaturized sampling approaches have emerged as promising tools for sample collection due to numerous advantages such as minute sample size, patient friendliness and ease of shipment. This article reviews the applications and advances of microsampling techniques in therapeutic drug monitoring (TDM), covering the period January 2015 - August 2020. As whole blood is the gold standard sampling matrix for TDM, this article comprehensively highlights the most historical microsampling technique, the dried blood spot (DBS), and its development. Advanced developments of DBS, ranging from various automation DBS, paper spray mass spectrometry (PS-MS), 3D dried blood spheroids and volumetric absorptive paper disc (VAPD) and mini-disc (VAPDmini) are discussed. The volumetric absorptive microsampling (VAMS) approach, which overcomes the hematocrit effect associated with the DBS sample, has been employed in recent TDM. The sample collection and sample preparation details in DBS and VAMS are outlined and summarized. This review also delineates the involvement of other biological fluids (plasma, urine, breast milk and saliva) and their miniaturized dried matrix forms in TDM. Specific features and challenges of each microsampling technique are identified and comparison studies are reviewed.

Barriers and opportunities for the clinical implementation of therapeutic drug monitoring in oncology

There are few fields of medicine in which the individualisation of medicines is more important than in the area of oncology. Under-dosing can have significant ramifications due to the potential for therapeutic failure and cancer progression; by contrast, over-dosing may lead to severe treatment-limiting side effects, such as agranulocytosis and neutropenia. Both circumstances lead to poor patient prognosis and contribute to the high mortality rates still seen in oncology. The concept of dose individualisation tailors dosing for each individual patient to ensure optimal drug exposure and best clinical outcomes. While the value of this strategy is well recognised, it has seen little translation to clinical application. However, it is important to recognise that the clinical setting of oncology is unlike that for which therapeutic drug monitoring (TDM) is currently the cornerstone of therapy (e.g. antimicrobials). Whilst there is much to learn from these established TDM settings, the challenges presented in the treatment of cancer must be considered to ensure the implementation of TDM in clinical practice. Recent advancements in a range of scientific disciplines have the capacity to address the current system limitations and significantly enhance the use of anticancer medicines to improve patient health. This review examines opportunities presented by these innovative scientific methodologies, specifically sampling strategies, bioanalytics and dosing decision support, to enable optimal practice and facilitate the clinical implementation of TDM in oncology.

Current direction and advances in analytical sample extraction techniques for drugs with special emphasis on bioanalysis

Analytical techniques may not be compatible or sufficiently sensitive to the analytes, unless it undergoes a specific sample extraction procedure. Sample extraction can be considered as one of the key steps in analysis. Analysis of a poorly treated sample may produce inferior quality of analytical data. Continuous advancement and development of newer sample extraction techniques such as solid phase microextraction, ultrasound, magnetically and microwave assisted magnetic extraction; electro-membrane extraction and dried blood spotting are to address the shortcomings of the existing techniques and to provide more automation, minimizing preparation time and make them high throughput. This review summarizes the suitability of application of the advanced sample preparation techniques available for chemical and bioanalysis in a comprehensive manner. This review also provides a scientific guidance for selecting the appropriate sample extraction technique based on sample type.