Human spastic Gracilis muscle isometric forces measured intraoperatively as a function of knee angle show no abnormal muscular mechanics

How mechanics of individual muscle-tendon units define knee and ankle joint function in health and cerebral palsy-a narrative review

This study reviews the relationship between muscle-tendon biomechanics and joint function, with a particular focus on how cerebral palsy (CP) affects this relationship. In healthy individuals, muscle size is a critical determinant of strength, with muscle volume, cross-sectional area, and moment arm correlating with knee and ankle joint torque for different isometric/isokinetic contractions. However, in CP, impaired muscle growth contributes to joint pathophysiology even though only a limited number of studies have investigated the impact of deficits in muscle size on pathological joint function. As muscles are the primary factors determining joint torque, in this review two main approaches used for muscle force quantification are discussed. The direct quantification of individual muscle forces from their relevant tendons through intraoperative approaches holds a high potential for characterizing healthy and diseased muscles but poses challenges due to the invasive nature of the technique. On the other hand, musculoskeletal models, using an inverse dynamic approach, can predict muscle forces, but rely on several assumptions and have inherent limitations. Neither technique has become established in routine clinical practice. Nevertheless, identifying the relative contribution of each muscle to the overall joint moment would be key for diagnosis and formulating efficient treatment strategies for patients with CP. This review emphasizes the necessity of implementing the intraoperative approach into general surgical practice, particularly for joint correction operations in diverse patient groups. Obtaining in vivo data directly would enhance musculoskeletal models, providing more accurate force estimations. This integrated approach can improve the clinicians' decision-making process and advance treatment strategies by predicting changes at the muscle and joint levels before interventions, thus, holding the potential to significantly enhance clinical outcomes.

Quantifying the effects of achilles tendon lengthening surgery: An intraoperative approach

Achilles tendon lengthening (ATL) is frequently used in the treatment of foot deformities. However, there is currently no objective method to determine the optimal muscle length during surgery. We developed an intraoperative approach to evaluate the passive and active forces of the triceps surae muscle group before and after ATL and aimed to test the following hypotheses: 1) the ankle passive range of motion (ROM) increases, 2) passive muscle forces decrease post-ATL, and 3) forces measured from patients with non-neurological and neurological conditions demonstrate different characteristics. Passive forces at various ankle joint positions were measured in ten patients (11.3 ± 3.0 years old) pre- and post-ATL using a force transducer attached to the Achilles tendon. In six patients, active isometric forces were measured by stimulating the triceps surae supramaximally. Passive forces decreased by 94.3% (p < 0.0001), and ROM increased by 89.4% (p < 0.0001) post-ATL. The pre-ATL passive forces were 70.8% ± 15.1% lower in patients with idiopathic foot deformities than in patients with neurological conditions (p < 0.001). The peak active force of 209.8 ± 114.3 N was achieved at an ankle angle of 38.3° ± 16.0°, where the passive force was 6.3 ± 6.7 N. The inter-individual variability was substantial in both groups. In conclusion, the hypotheses posed were supported. The present findings suggest that muscle passive and active force production as well as the inter-individual variability should be considered when planning further treatment.

Shear wave elastography characterizes passive and active mechanical properties of biceps brachii muscle in vivo

Mechanical characterization of individual muscles in their in vivo environment is not well studied. Shear wave elastography (SWE) as a non-invasive technique was shown to be promising in quantifying the local mechanical properties of skeletal muscles. This study aimed to investigate the mechanics of the biceps brachii muscle (BB) derived from SWE in relation to elbow joint position and contraction intensity during isometric contraction. 14 healthy, young subjects participated in the study and five different joint positions (60°-180° elbow angle) were investigated. Shear elastic modulus and surface electromyography (sEMG) of the BB and elbow torque were measured simultaneously, both in passive (i.e., resting) and active states during slow, sub-maximal isometric ramp contractions up to 25%, 50%, and 75% of the maximum voluntary contraction. At passive state, the shear elastic modulus of the BB increased with increasing elbow angle (p < 0.001). Maximum elbow flexion torque was produced at 60° and it decreased with increasing elbow angle (p = 0.001). During sub-maximal contractions, both elbow angle (p < 0.001) and contraction intensity (p < 0.001) had significant effects on the shear elastic modulus but only contraction intensity (p < 0.001) affected sEMG amplitude of the BB. Although torque was decreased at extended elbow positions (150°, 180°), higher active shear elastic modulus of BB muscle was found compared to flexed positions (60°, 90°). Linear regression of the BB sEMG amplitude over elbow torque showed good agreement for all joint positions (R² between 0.69 and 0.89) while the linear agreement between shear elastic modulus of BB and elbow torque differed between flexed (R² = 0.70 at 60° and R² = 0.79 at 90°) and extended positions (with the lowest R² = 0.57 at 150°). We conclude that using SWE, we can detect length-dependent mechanical changes of BB both in passive and active states. More importantly, SWE can be used to characterize active muscle properties in vivo. The present findings have critical importance for developing muscle stiffness as a measure of individual muscle force to validate muscle models and using SWE in clinical diagnostics.

Botulinum Toxin Intervention in Cerebral Palsy-Induced Spasticity Management: Projected and Contradictory Effects on Skeletal Muscles

Spasticity, following the neurological disorder of cerebral palsy (CP), describes a pathological condition, the central feature of which is involuntary and prolonged muscle contraction. The persistent resistance of spastic muscles to stretching is often followed by structural and mechanical changes in musculature. This leads to functional limitations at the respective joint. Focal injection of botulinum toxin type-A (BTX-A) is effectively used to manage spasticity and improve the quality of life of the patients. By blocking acetylcholine release at the neuromuscular junction and causing temporary muscle paralysis, BTX-A aims to reduce spasticity and hereby improve joint function. However, recent studies have indicated some contradictory effects such as increased muscle stiffness or a narrower range of active force production. The potential of these toxin- and atrophy-related alterations in worsening the condition of spastic muscles that are already subjected to changes should be further investigated and quantified. By focusing on the effects of BTX-A on muscle biomechanics and overall function in children with CP, this review deals with which of these goals have been achieved and to what extent, and what can await us in the future.

Procedures for obtaining muscle physiology parameters during a gracilis free-functioning muscle transfer in adult patients with brachial plexus injury

A complete understanding of muscle mechanics allows for the creation of models that closely mimic human muscle function so they can be used to study human locomotion and evaluate surgical intervention. This includes knowledge of muscle-tendon parameters required for accurate prediction of muscle forces. However, few studies report experimental data obtained directly from whole human muscle due to the invasive nature of these experiments. This article presents an intraoperative, in vivo measurement protocol for whole muscle-tendon parameters that include muscle-tendon unit length, sarcomere length, passive tension, and active tension in response to external stimulation. The advantage of this protocol is the ability to obtain these rare experimental data in situ in addition to muscle volume and weight since the gracilis is also completely removed from the leg. The entire protocol including the surgical steps for gracilis harvest takes ~ 3 h. Actual testing of the gracilis where experimental data is measured takes place within a 30-min window during surgery.

Effects of Kinesio Taping on Muscle Contractile Properties: Assessment Using Tensiomyography

CONTEXT

Although functional effects of kinesio taping (KT) have been widely studied, its effects on contractile properties of the target muscle remain unclear. Tensiomyography is suitable for quantifying muscle stiffness and rate of force development upon imposed twitch contraction.

OBJECTIVE

To test the hypothesis that KT has effects on contractile properties of targeted muscle using tensiomyography.

DESIGN

Prospective cohort study.

SETTINGS

Performance laboratory of a sports rehabilitation center.

PARTICIPANTS

A total of 11 healthy volunteers.

INTERVENTIONS

Tensiomyography measurements before KT facilitation technique applied (pre-KT), 45 minutes, and 24 hours after KT (post-KT1 and post-KT2, respectively) without removing the tape.

MAIN OUTCOME MEASURES

Maximal radial displacement, contraction time, delay time, sustain time, relaxation time, and velocity of contraction.

RESULTS

Significant effects were shown for maximal radial displacement (P = .004), contraction time (P = .013), relaxation time (P = .035), and velocity of contraction (P = .0033), but not for delay time (P = .060) and sustain time (P = .078). Post hoc testing indicated a significant decrease in maximal radial displacement for post-KT1 only (from 6.33 [1.46] to 4.87 [2.14] mm), and a significant increase in contraction time for both post-KT1 and post-KT2 (from 30.87 [11.39] to 39.71 [13.49] ms, and 37.41 [14.73] ms, respectively). Post hoc testing also showed a significant decrease in relaxation time for post-KT2 (from 65.97 [53.43] to 47.45 [38.12] ms), and a significant decrease in velocity of contraction for both post-KT1 and post-KT2 (from 0.22 [0.08] to 0.15 [0.09] mm/s, and 0.16 [0.07] mm/s), respectively.

CONCLUSION

The findings indicate that KT leads to an increased muscle stiffness and a reduced muscle rate of force production despite the facilitation technique applied.

Intramuscular pressure of human tibialis anterior muscle detects age-related changes in muscle performance

Intramuscular pressure (IMP) reflects forces produced by a muscle. Age is one of the determinants of skeletal muscle performance. The present study aimed to test whether IMP mirrors known age-related muscular changes. We simultaneously measured the tibialis anterior (TA) IMP, compound muscle action potential (CMAP), and ankle torque in thirteen older adults (60-80 years old) in vivo by applying different stimulation intensities and frequencies. We found significant positive correlations between the stimulation intensity and IMP and CMAP. Increasing stimulation frequency caused ankle torque and IMP to increase. The electromechanical delay (EMD) (36 ms) was longer than the onset of IMP (IMPD) (29 ms). Compared to the previously published data collected from young adults (21-40 years old) in identical conditions, the TA CMAP and IMP of older adults at maximum intensity of stimulation were 23.8% and 39.6% lower, respectively. For different stimulation frequencies, CMAP, IMP, as well as ankle torque of older adults were 20.5%, 24.2%, and 13.2% lower, respectively. Surprisingly, the EMD did not exhibit any difference between young and older adults and the IMPD was consistent with the EMD. Data supporting the hypotheses suggest that IMP measurement is an indicator of muscle performance in older adults.

Long-term BTX-A effects on bi-articular muscle: Higher passive force, limited length range of active force production and unchanged intermuscular interactions

Botulinum toxin type-A (BTX-A) is commonly used for spasticity management aiming at reducing joint stiffness and increasing joint range of motion in CP patients. However, previous animal studies showed acutely increased passive forces and a narrowerlength range of active force exertion (l_range) for muscles exposed. BTX-A can spread affecting mechanics of several muscles in a compartment, but it was shown acutely to diminishepimuscular myofascial force transmission (EMFT). Yet, our understanding of these effects in the long-term is limited and they need to be tested in a bi-articular muscle. The goal was to test the following hypotheses in a long-term rat model: exposure to BTX-A (i) has no effects onl_rangeand passive forces of bi-articular extensor digitorum longus (EDL) muscle and (ii) diminishes EMFT. Male Wistar rats were divided into two groups: BTX-A and control (0.1 units of BTX-A or only saline was injected into the tibialis anterior). Isometric proximal and distal EDL forces were measured simultaneously, one-month post-injection. Proximally and distally lengthening the muscle showed that BTX-A causes a significantly narrowerl_range(by 14.7% distally and 32.2% proximally) and significantly increased passive muscle forces (over 2-fold both distally and proximally). Altering muscle position at constant length showed that BTX-A does not change EMFT. The findings reject both hypotheses showing that long-term exposure to BTX-A compromises bi-articular muscle's contribution to motion for both joints and the muscle's mechanical interaction with the surroundings remains unaffected. These effects which may compromise long-term spasticity management should be studied in CP patients.

Intraoperative testing of passive and active state mechanics of spastic semitendinosus in conditions involving intermuscular mechanical interactions and gait relevant joint positions

In cerebral palsy (CP) patients suffering pathological knee joint motion, spastic muscle's passive state forces have not been quantified intraoperatively. Besides, assessment of spastic muscle's active state forces in conditions involving intermuscular mechanical interactions and gait relevant joint positions is lacking. Therefore, the source of flexor forces limiting joint motion remains unclear. The aim was to test the following hypotheses: (i) in both passive and active states, spastic semitendinosus (ST) per se shows its highest forces within gait relevant knee angle (KA) range and (ii) due to intermuscular mechanical interactions, the active state forces elevate. Isometric forces (seven children with CP, GMFCS-II) were measured during surgery over a range of KA from flexion to full extension, at hip angle (HA) = 45° and 20°, in four conditions: (I) passive state, (II) individual stimulation of the ST, simultaneous stimulation of the ST (III) with its synergists, and (IV) also with an antagonist. Gait analyses: intraoperative data for KA = 17-61° (HA = 45°) and KA = 0-33° (HA = 20°) represent the loading response and terminal swing, and mid/terminal stance phases of gait, respectively. Intraoperative tests: Passive forces maximally approximated half of peak force in condition II (HA = 45°). Added muscle activations did increase muscle forces significantly (HA = 45°: on average by 42.0% and 72.5%; HA = 20°: maximally by 131.8% and 123.7%, respectively in conditions III and IV, p < 0.01). In conclusion, intermuscular mechanical interactions yield elevated active state forces, which are well above passive state forces. This indicates that intermuscular mechanical interactions may be a source of high flexor forces in CP.

Intraoperative experiments combined with gait analyses indicate that active state rather than passive dominates the spastic gracilis muscle's joint movement limiting effect in cerebral palsy

BACKGROUND

In cerebral palsy, spastic muscle's passive forces are considered to be high but have not been assessed directly. Although activated spastic muscle's force-joint angle relations were studied, this was independent of gait relevant joint positions. The aim was to test the following hypotheses intraoperatively: (i) spastic gracilis passive forces are high even in flexed knee positions, (ii) its active state forces attain high amplitudes within the gait relevant knee angle range, and (iii) increase with added activations of other muscles.

METHODS

Isometric forces (seven children with cerebral palsy, gross motor function classification score = II) were measured during surgery from knee flexion to full extension, at hip angles of 45° and 20° and in four conditions: (I) passive state, after gracilis was stimulated (II) alone, (III) simultaneously with its synergists, and (IV) also with an antagonist.

FINDINGS

Directly measured peak passive force of spastic gracilis was only a certain fraction of the peak active state forces (maximally 26%) measured in condition II. Conditions III and IV caused gracilis forces to increase (for hip angle = 45°, by 32.8% and 71.9%, and for hip angle = 20°, by 24.5% and 45.1%, respectively). Gait analyses indicated that intraoperative data for knee angles 61-17° and 33-0° (for hip angles 45° and 20°, respectively) are particularly relevant, where active state force approximates its peak values.

INTERPRETATION

Active state muscular mechanics, rather than passive, of spastic gracilis present a capacity to limit joint movement. The findings can be highly relevant for diagnosis and orthopaedic surgery in individuals with cerebral palsy.

Multiscale modeling of the neuromuscular system: Coupling neurophysiology and skeletal muscle mechanics

Mathematical models and computer simulations have the great potential to substantially increase our understanding of the biophysical behavior of the neuromuscular system. This, however, requires detailed multiscale, and multiphysics models. Once validated, such models allow systematic in silico investigations that are not necessarily feasible within experiments and, therefore, have the ability to provide valuable insights into the complex interrelations within the healthy system and for pathological conditions. Most of the existing models focus on individual parts of the neuromuscular system and do not consider the neuromuscular system as an integrated physiological system. Hence, the aim of this advanced review is to facilitate the prospective development of detailed biophysical models of the entire neuromuscular system. For this purpose, this review is subdivided into three parts. The first part introduces the key anatomical and physiological aspects of the healthy neuromuscular system necessary for modeling the neuromuscular system. The second part provides an overview on state-of-the-art modeling approaches representing all major components of the neuromuscular system on different time and length scales. Within the last part, a specific multiscale neuromuscular system model is introduced. The integrated system model combines existing models of the motor neuron pool, of the sensory system and of a multiscale model describing the mechanical behavior of skeletal muscles. Since many sub-models are based on strictly biophysical modeling approaches, it closely represents the underlying physiological system and thus could be employed as starting point for further improvements and future developments. This article is categorized under: Physiology > Mammalian Physiology in Health and Disease Analytical and Computational Methods > Computational Methods Models of Systems Properties and Processes > Organ, Tissue, and Physiological Models.

Intramuscular Pressure of Human Tibialis Anterior Muscle Reflects in vivo Muscular Activity

Intramuscular pressure (IMP) is the fluid hydrostatic pressure generated within a muscle and reflects the mechanical forces produced by a muscle. By providing accurate quantification of interstitial fluid pressure, the measurement of IMP may be useful to detect changes in skeletal muscle function not identified with established techniques. However, the relationship between IMP and muscle activity has never been studied in vivo in healthy human muscles. To determine if IMP is able to evaluate electromechanical performance of muscles in vivo, we tested the following hypotheses on the human tibialis anterior (TA) muscle: (i) IMP increases in proportion to muscle activity as measured by electrical [Compound Muscle Action Potential (CMAP)] and mechanical (ankle torque) responses to activation by nerve stimulation and (ii) the onset delay of IMP (IMPD) is shorter than the ankle torque electromechanical delay (EMD). Twelve healthy adults [six females; mean (SD) = 28.1 (5.0) years old] were recruited. Ankle torque, TA IMP, and CMAP responses were collected during maximal stimulation of the fibular nerve at different intensity levels of electrical stimulation, and at different frequencies of supramaximal stimulation, i.e., at 2, 5, 10, and 20 Hz. The IMP response at different stimulation intensities was correlated with the CMAP amplitude (r² = 0.94). The area of the IMP response at different stimulation intensities was also significantly correlated with the area of the CMAP (r² = 0.93). Increasing stimulation intensity resulted in an increase of the IMP response (P < 0.001). Increasing stimulation frequency caused torque (P < 0.001) as well as the IMP (P < 0.001) to increase. The ankle torque EMD [median (interquartile range) = 41.8 (14.4) ms] was later than the IMPD [33.0 (23.6) ms]. These findings support the hypotheses and suggest that IMP captures active mechanical properties of muscle in vivo and can be used to detect muscular changes due to drugs, diseases, or aging.

Between-day reliability of MyotonPRO for the non-invasive measurement of muscle material properties in the lower extremities of patients with a chronic spinal cord injury

Measuring the muscle properties of patients with spinal cord injuries (SCIs) is important to better understand their biomechanical features. In this study, we sought to evaluate the between-day reliability of MyotonPRO, a handheld device that can measure muscle mechanical properties, and assess whether it is reliable to measure muscle properties over time in patients with SCI. Thirteen men with complete SCIs (age 53.9 ± 6.3 years, height 171.0 ± 5.2 cm, weight 66.1 ± 5.8 kg), and injury levels ranging from L1 to T12, were enrolled. Oscillation frequency; logarithmic decrement; dynamic stiffness; mechanical stress relaxation time; and creep of the biceps femoris, medial and lateral gastrocnemius, rectus femoris, tibialis anterior, and Achilles tendon were measured on consecutive days using MyotonPRO. The intraclass coefficient for most muscles and the Achilles tendon ranged from 0.53 to 0.99 for all parameters. The percentage standard error of the measurement for many parameters in most muscles and the Achilles tendon was less than 10%. Bland-Altman analysis showed a high agreement for all mechanical properties. No significant differences were observed in any muscle or Achilles tendon properties between days (all p > 0.05). These results indicate that the MyotonPRO is reliable for between-day measurements of the mechanical properties of lower limb muscles and Achilles tendon in patients with SCI.

A new strength assessment to evaluate the association between muscle weakness and gait pathology in children with cerebral palsy

AIM

The main goal of this validation study was to evaluate whether lower limb muscle weakness and plantar flexor rate of force development (RFD) related to altered gait parameters in children with cerebral palsy (CP), when weakness was assessed with maximal voluntary isometric contractions (MVICs) in a gait related test position. As a subgoal, we analyzed intra- and intertester reliability of this new strength measurement method.

METHODS

Part 1 -Intra- and intertester reliability were determined with the intra-class correlation coefficient (ICC2,1) in 10 typical developing (TD) children (age: 5-15). We collected MVICs in four lower limb muscle groups to define maximum joint torques, as well as plantar flexor RFD. Part 2 -Validity of the strength assessment was explored by analyzing the relations of lower limb joint torques and RFD to a series of kinematic- and kinetic gait features, the GDI (gait deviation index), and the GDI-kinetic in 23 children with CP (GMFCS I-II; age: 5-15) and 23 TD children (age: 5-15) with Spearman's rank correlation coefficients.

RESULTS

Part 1 -The best reliability was found for the torque data (Nm), with the highest ICC2,1 (0.951) for knee extension strength (inter) and the lowest (0.693) for dorsiflexion strength (intra). For plantar flexor RFD, the most reliable window size was 300 milliseconds (ICC2,1: 0.828 (inter) and 0.692 (intra)). Part 2 -The children with CP were significantly weaker than the TD children (p <0.001). Weakness of the dorsiflexors and plantar flexors associated with delayed and decreased knee flexion angle during swing, respectively. No other significant correlations were found.

CONCLUSION

While our new strength assessment was reliable, intra-joint correlations between weakness, RFD, and gait deviations were low. However, we found inter-joint associations, reflected by a strong association between plantar- and dorsiflexor weakness, and decreased and delayed knee flexion angle during swing.

Not merely a protective packing organ? A review of fascia and its force transmission capacity

Recent research indicates that fascia is capable of changing its biomechanical properties. Moreover, as it links the skeletal muscles, forming a body-wide network of multidirectional myofascial continuity, the classical conception of muscles as independent actuators has been challenged. Hence, the present synthesis review aims to characterize the mechanical relevance of the connective tissue for the locomotor system. Results of cadaveric and animal studies suggest a clinically relevant myofascial force transmission to neighboring structures within one limb (e.g., between synergists) and in the course of muscle-fascia chains (e.g., between leg and trunk). Initial in vivo trials appear to underpin these findings, demonstrating the existence of nonlocal exercise effects. However, the factors influencing the amount of transmitted force (e.g., age and physical activity) remain controversial, as well as the role of the central nervous system within the context of the observed remote exercise effects.

Intraoperative experiments show relevance of inter-antagonistic mechanical interaction for spastic muscle's contribution to joint movement disorder

BACKGROUND

Recent intra-operative knee angle-muscle force data showed no abnormal muscular mechanics (i.e., a narrow joint range of muscle force exertion and peak muscle force availability at flexed joint positions), if the spastic gracilis muscle was stimulated alone. This can limit inter-muscular mechanical interactions, which have been shown to affect muscular mechanics substantially. We aimed at testing the hypothesis that the knee angle-muscle force curves of the spastic gracilis muscle activated simultaneously with a knee extensor are representative of joint movement disorder.

METHODS

Experiments were performed during remedial surgery of spastic cerebral palsy patients (n=6, 10 limbs tested). Condition-I: muscle forces were measured in flexed knee positions (120° and 90°) after activating the gracilis exclusively. Condition-II: knee angle-muscle force data were measured from 120° to full extension after activating the vastus medialis, simultaneously.

FINDINGS

Condition-II vs. I: Inter-antagonistic interaction did not consistently cause a gracilis force increase. Condition-II: Peak muscle force=mean 47.92 N (SD 22.08 N). Seven limbs showed availability of high muscle force in flexed knee positions (with minimally 84.8% of peak force at 120°). Knee angle-muscle force curves of four of them showed a local minimum followed by an increasing force (explained by an increasing passive force, indicating muscle lengths unfavorable for active force exertion). High active gracilis forces measured at flexed knee positions and narrow operational joint range of force exertion do indicate abnormality. The remainder of the limbs showed no such abnormality.

INTERPRETATION

Our hypothesis is confirmed for most, but not all limbs tested. Therefore, tested inter-antagonistic mechanical interaction can certainly, but not exclusively be a factor for abnormal mechanics of the spastic muscle.