Evaluation of optimal implant alignment in total hip arthroplasty based on postoperative range of motion simulation

Adjustment of stem anteversion using tapered cone stem in total hip arthroplasty

Aims

The aim of this study was to evaluate the suitability of the tapered cone stem in total hip arthroplasty (THA) in patients with excessive femoral anteversion and after femoral osteotomy.

Methods

We included patients who underwent THA using Wagner Cone due to proximal femur anatomical abnormalities between August 2014 and January 2019 at a single institution. We investigated implant survival time using the endpoint of dislocation and revision, and compared the prevalence of prosthetic impingements between the Wagner Cone, a tapered cone stem, and the Taperloc, a tapered wedge stem, through simulation. We also collected Oxford Hip Score (OHS), visual analogue scale (VAS) satisfaction, and VAS pain by postal survey in August 2023 and explored variables associated with those scores.

Results

Of the 58 patients (62 hips), two (two hips) presented with dislocation or reoperation, and Kaplan-Meier analysis indicated a five-year survival rate of 96.7% (95% CI 92.4 to 100). Mean stem anteversion was 35.2° (SD 18.2°) for the Taperloc stem and 29.8° (SD 7.9°) for the Wagner Cone stem; mean reduction from Taperloc to Wagner Cone was 5.4° (SD 18.8°). Overall, 55 hips (52 patients) were simulated, and the prevalence of prosthetic impingement was lower for the Wagner Cone (5.5%, 3/55) compared with the Taperloc (20.0%, 11/55) stem, with an odds ratio of 0.20 (p = 0.038). Among the 33 respondents to the postal survey (36 hips), the mean scores were VAS pain 10.9, VAS satisfaction 86.9, and OHS 44.7. A multivariable analysis revealed that reduction of stem anteversion from Taperloc to Wagner Cone was more favourable for VAS pain (p = 0.029) and VAS satisfaction (p = 0.002).

Conclusion

The mid-term survival rate for THA using the Wagner Cone stem was high, which may be supported by a reduction in prosthetic impingement. The reduction in excessive stem anteversion by using a tapered cone stem was associated with reduced pain and increased patient satisfaction.

Polyethylene liner dissociation in total hip arthroplasty: a retrospective case-control study on a single implant design

BACKGROUND

Modular acetabular components for total hip arthroplasty (THA) provide intraoperative flexibility; however, polyethylene liner dissociation may occur. This study aimed to examine the incidence and causes of liner dissociation associated with a specific acetabular component design at a single centre.

MATERIALS AND METHODS

A retrospective analysis of 7027 patients who underwent primary THA was performed to identify isolated liner dislocations. Patient demographics, clinical presentations, surgical and implant details, and both radiographic and computed tomography (CT) findings were analysed. Patients with liner dislocation were matched to a control group via 2:1 propensity score matching, and a logistic regression analysis was employed to identify associated risk factors.

RESULTS

A total of 32 patients (0.45%) experienced liner dislocation at a mean 71.47 ± 60.10 months post surgery. Significant factors contributing to dislocations included the use of a conventional compared with a highly crosslinked polyethylene component (p = 0.049) and screw fixation (p = 0.028). Radiographic and CT analysis highlighted the importance of proper component orientation, revealing that patients experiencing dislocations demonstrated significantly lower acetabular cup anteversion angles (p = 0.001) compared with the control group. Impingement and malposition, identified in 41% and 47% of the cases, respectively, further underscored the multifactorial nature of dislocation risks.

CONCLUSIONS

While the overall rate of polyethylene liner dislocation was low, the findings of this study highlight the importance of appropriate cup placement to decrease the risk of dissociation. It further substantiates the influence of impingement and malposition in liner displacement, with increased mechanical stress exerted on the locking mechanism under adverse conditions and the potential risk increase due to screw placement.

Robotic Arm-Assisted System Improved Accuracy of Cup Position and Orientation in Cementless Total Hip Arthroplasty for Dysplastic Hips: A Comparison Among Groups With Manual Placement, Computed Tomography-Based Navigation, and Robotic Surgery

Background

Accurate cup placement in total hip arthroplasty (THA) for patients with dysplasia is challenging due to the distinctive bone deformities. This study aimed to compare the accuracy of cup placement position and orientation across robotic arm-assisted systems (R-THA), computed tomography-based navigation (N-THA), and manual procedure (M-THA) in THA for osteoarthritis secondary to dysplasia.

Methods

A total of 167 patients (197 hips), including 88 R-THAs, 45 N-THAs, and 46 M-THAs, were analyzed. Propensity score matching was performed to align the patient backgrounds. Horizontal and vertical centers of rotation were measured for cup position, whereas radiographic inclination and anteversion were measured for cup orientation. The proportion of cases with cup placement within 3 mm and 5° from the target was compared.

Results

R-THA had a significantly higher percentage of cup placement within 3 mm of the target compared to N-THA (78% vs 49%; P = .0041) and M-THA (78% vs 53%; P = .013). Similarly, R-THA was significantly more successful in placing the cup within 5° of the target compared to N-THA (84% vs 58%; P = .0049) and M-THA (91% vs 20%; P < .0001). Moreover, N-THA was significantly better at placing the cup within 5° of the target compared to M-THA (62% vs 14%; P < .0001), whereas there was no significant difference in the percentage of cup placement within 3 mm of the target (51% vs 51%; P = 1.0).

Conclusions

Robotic arm-assisted system and computed tomography-based navigation improved accuracy in cup orientation compared to the manual procedure. Additionally, the robotic arm-assisted system further improved cup position accuracy.

Retrospective study comparing the accuracies of handheld infrared stereo camera and augmented reality-based navigation systems for total hip arthroplasty

BACKGROUND

The use of portable navigation systems (PNS) in total hip arthroplasty (THA) has become increasingly prevalent, with second-generation PNS (sPNS) demonstrating superior accuracy in the lateral decubitus position compared to first-generation PNS. However, few studies have compared different types of sPNS. This study retrospectively compares the accuracy and clinical outcomes of two different types of sPNS instruments in patients undergoing THA.

METHODS

A total of 158 eligible patients who underwent THA at a single institution between 2019 and 2022 were enrolled in the study, including 89 who used an accelerometer-based PNS with handheld infrared stereo cameras in the Naviswiss group (group N) and 69 who used an augmented reality (AR)-based PNS in the AR-Hip group (group A). Accuracy error, navigation error, clinical outcomes, and preparation time were compared between the two groups.

RESULTS

Accuracy errors for Inclination were comparable between group N (3.5° ± 3.0°) and group A (3.5° ± 3.1°) (p = 0.92). Accuracy errors for anteversion were comparable between group N (4.1° ± 3.1°) and group A (4.5° ± 4.0°) (p = 0.57). The navigation errors for inclination (group N: 2.9° ± 2.7°, group A: 3.0° ± 3.2°) and anteversion (group N: 4.3° ± 3.5°, group A: 4.3° ± 4.1°) were comparable between the groups (p = 0.86 and 0.94, respectively). The preparation time was shorter in group A than in group N (p = 0.036). There were no significant differences in operative time (p = 0.255), intraoperative blood loss (p = 0.387), or complications (p = 0.248) between the two groups.

CONCLUSION

An Accelerometer-based PNS using handheld infrared stereo cameras and AR-based PNS provide similar accuracy during THA in the lateral decubitus position, with a mean error of 3°-4° for both inclination and anteversion, though the AR-based PNS required a shorter preparation time.

Predictors of physical activity recovery after total hip arthroplasty: a prospective observational study

PURPOSE

Little is known about the changes and the factors in physical activity as following total hip arthroplasty (THA). There are potential discrepancies between subjective and objective measurements of physical activity. Thus, our porpose is to compare objective and subjective measurements of activity levels in patients undergoing THA preoperatively, three months and one year following surgery, and investigated the factors that predicts the objective activity level after THA.

METHODS

This prospective observational study included 42 patients with unilateral symptomatic hip osteoarthritis who underwent THA. The objective activity level (step counts, sit-to-stands, and upright time) by using a tri-axial accelerometer, PRO (Oxford hip score; OHS and University of California, Los Angeles activity score; UCLA score), and muscle volume around the hip joint by using preoperative computed tomography were measured.

RESULTS

The number of steps, OHS, and UCLA score before, at three months, and one year after THA averaged 5092, 6532, and 6545 steps, 30.3, 43.0, and 44.2 points, and 3.4, 4.8, and 4.6 points, respectively, with significant postoperative increases (P < 0.05). No significant difference was found between three months and one year postoperatively. In multivariate analysis, younger age and higher preoperative contralateral gluteal medius volume were the predictors of higher postoperative step counts (P < 0.05).

CONCLUSIONS

Physical activity, including step counts, OHS, and UCLA score increased significantly until three months after unilateral THA. Early surgical intervention before contralateral muscle declines and preoperative rehabilitation including contralateral side may additionally improve postoperative activity levels.

Elucidation of target implant orientations with the safety range of hip rotation with adduction or abduction during squatting: Simulation based on in vivo replaced hip kinematics

Objectives: The study aimed to elucidate target cup orientation and stem anteversions to avoid impingement between the liner and stem neck even at hip rotation with adduction during the deeply flexed posture.

Methods: A computer simulation analysis was performed on 32 total hip arthroplasty patients applying patient-specific orientation of the components and in vivo hip kinematics obtained from three-dimensional analysis of the squatting motion. The anterior/posterior liner-to-neck distance and impingement were evaluated based on a virtual change in internal/external rotation (0°–60°) and adduction/abduction (0°–20°) at actual maximum flexion/extension during squatting. Cutoff values of cup orientations, stem anteversion, and combined anteversion to avoid liner-to-neck impingements were determined.

Results: The anterior liner-to-neck distance decreased as internal rotation or adduction increased, and the posterior liner-to-neck distance decreased as external rotation or adduction increased. Negative correlations were found between anterior/posterior liner-to-neck distances at maximum flexion/extension and internal/external rotation. Anterior/posterior liner-to-neck impingements were observed in 6/18 hips (18/56%) at 45° internal/external rotation with 20° adduction. The range of target cup anteversion, stem anteversion, and combined anteversion to avoid both anterior and posterior liner-to-neck impingements during squatting were 15°–18°, 19°–34°, and 41°–56°, respectively.

Conclusion: Simulated hip rotations caused prosthetic impingement during squatting. Surgeons could gain valuable insights into target cup orientations and stem anteversion based on postoperative simulations during the deeply flexed posture.