Development of ZIF-8 membranes: opportunities and challenges for commercial applications

Designing Nanoporous Polymer Films for High-Performance Passive Daytime Radiative Cooling

Energy-free passive daytime radiative cooling (PDRC) technology makes it an attractive solution to both the building energy crisis and global warming. Spectrally selective porous polymers have great potential for practical PDRC applications owing to their cooling performance and scalability. A fundamental understanding of the relationship between the cooling performance and pore properties is crucial for guiding future structural designs of high-performance PDRC materials. However, one of the key challenges is achieving uniform nanopores and tailorable pore morphologies in the PDRC coating films. Here we demonstrate a strategy to use advanced metal-organic framework (MOF) nanocrystals as a sacrificial template creating a nanoporous poly(vinylidene fluoride) (PVDF) coating film with uniform-sized nanopores for highly daytime passive radiative cooling. The experimental evidence indicates that nanopores around 400 nm in size, comparable to the wavelength within the ultraviolet and visible spectra, along with an appropriate porosity of 37%, contribute to excellent solar reflectance (94.9 ± 0.8%) and high long-wave infrared emission (92.8 ± 1.4%) in the resulting porous PVDF films. This leads to subambient cooling of ≈9.5 °C and a promising net cooling power of 137 W/m2 at midday under solar intensities of ∼1275 and ∼1320 W/m2. The performance equals or exceeds that of state-of-the-art polymeric PDRC designs, and this general strategy of tailing nanostructures is expected to open a new avenue toward high-performance radiative cooling materials for PDRC applications.

Synergistic Enhancement of Electron Dynamics and Optical Properties in Zeolitic Imidazolate Framework-8-Derived Zinc Oxide via Surface Plasmon Resonance Effects of Silver Nanoparticles under UV Irradiation

This study investigates the surface plasmon resonance (SPR)-induced UV photoresponse of zinc oxide (ZnO) derived from zeolitic imidazolate framework-8 (ZIF-8) to assess the influence of silver nanoparticles (Ag NPs) on the photoresponse behavior of metal-organic framework (MOF)-derived ZnO. The initial synthesis involved a thermal treatment in air to convert ZIF-8 into ZnO. We noted enhanced optical absorption both in the UV and visible spectra with the deposition of Ag NPs onto the ZIF-8-derived ZnO. Additionally, the presence of Ag NPs in the ZnO resulted in a substantial increase in current, even without any light exposure. This increase is attributed to the transfer of electrons from the Ag NPs to the ZnO. Photocurrent measurements under UV illumination revealed that the photocurrent with Ag NPs was significantly higher-by two orders of magnitude-compared with that without Ag NPs. This demonstrates that SPR-induced absorption markedly boosted the photocurrent, although the current rise and decay time constants remained comparable to those observed with ZnO alone. Although Ag NPs contribute electrons to ZnO, creating a "pre-doping" effect that heightens baseline conductivity (even in the absence of light), this does not necessarily alter the recombination dynamics of the photogenerated carriers, as indicated by the similar rise and decay time constants. The electron transfer from Ag to ZnO increases the density of charge carriers but does not significantly influence their recombination.

Recent progress on CO2 separation membranes

Presently, excessive carbon dioxide emissions represent a critical environmental challenge. Thus, urgent efforts are required to develop environmentally friendly and low-energy technologies for carbon dioxide treatment. In this case, membrane separation technology stands out as a promising avenue for CO2 separation, with selective membrane materials of high permeability playing a pivotal role in this process. Herein, we categorize CO2 separation membranes into three groups: inorganic membranes, organic membranes, and emerging membranes. Moreover, representative high-performance membranes are introduced and their synthesis methods, gas separation performances, and applications are examined. Furthermore, a brief analysis of the challenges encountered by carbon dioxide separation membrane materials is provided together with a discussion on the future research direction. It is expected that this review will provide some potential insights and guidance for the future development of CO2 separation membranes, which can promote their development.

Fabrication of binary metal-organic frameworks of Ni-Mn@ZIFs(Cox·Zn1-xO) decorated on CF/CuO nanowire for high-performance electrochemical pseudocapacitors

Herein, metal-organic frameworks (MOFs) derived nanoflower-like based binary transition metal (Ni-Mn) are successfully fabricated by a simple synthesis method. The fabricated nanoflower-like structure displays a unique nanoflower-like architecture and internal porous channels constructed by MOF coated on CuO/CF/ZIFs (Cox·Zn1-xO) substrate, which is beneficial for the penetration of electrolyte and electron/ion transportation. The as-prepared CF/CuO/ZIFs (Cox·Zn1-xO)@BMOF(Ni-Mn) electrode materials present significant synergy among transition metal ions, contributing to enhanced electrochemical performances. The as-prepared CF/CuO/ZIFs (Cox·Zn1-xO)@BMOF(Ni-Mn) hybrid nanoflower-like display a high specific capacity of 1249.99 C g-1 at 1 A g-1 and the specific capacitance retention is about 91.74% after 5000 cycles. In addition, the as-assembled CF/CuO/ZIFs (Cox·Zn1-xO)@BMOF(Ni-Mn)//AC asymmetric supercapacitor (ASC) device exhibited a maximum energy density of 21.77 Wh·kg-1 at a power density of 799 W kg-1, and the capacity retention rate after 5000 charge and discharge cycles was 88.52%.

A biomimetic camouflaged metal organic framework for enhanced siRNA delivery in the tumor environment

Gene silencing through RNA interference (RNAi), particularly using small double-stranded RNA (siRNA), has been identified as a potent strategy for targeted cancer treatment. Yet, its application faces challenges such as nuclease degradation, inefficient cellular uptake, endosomal entrapment, off-target effects, and immune responses, which have hindered its effective delivery. In the past few years, these challenges have been addressed significantly by using camouflaged metal-organic framework (MOF) nanocarriers. These nanocarriers protect siRNA from degradation, enhance cellular uptake, and reduce unintended side effects by effectively targeting desired cells while evading immune detection. By combining the properties of biomimetic membranes and MOFs, these nanocarriers offer superior benefits such as extended circulation times, enhanced stability, and reduced immune responses. Moreover, through ligand-receptor interactions, biomimetic membrane-coated MOFs achieve homologous targeting, minimizing off-target adverse effects. The MOFs, acting as the core, efficiently encapsulate and protect siRNA molecules, while the biomimetic membrane-coated surface provides homologous targeting, further increasing the precision of siRNA delivery to cancer cells. In particular, the biomimetic membranes help to shield the MOFs from the immune system, avoiding unwanted immune responses and improving their biocompatibility. The combination of siRNA with innovative nanocarriers, such as camouflaged-MOFs, presents a significant advancement in cancer therapy. The ability to deliver siRNA with precision and effectiveness using these camouflaged nanocarriers holds great promise for achieving more personalized and efficient cancer treatments in the future. This review article discusses the significant progress made in the development of siRNA therapeutics for cancer, focusing on their effective delivery through novel nanocarriers, with a particular emphasis on the role of metal-organic frameworks (MOFs) as camouflaged nanocarriers.

Unexpectedly High Propylene/Propane Separation Performance of Asymmetric Mixed-Matrix Membranes through Additive-Assisted In Situ ZIF-8 Filler Formation: Experimental and Computational Studies

Zeolitic-imidazolate framework-8 (ZIF-8), composed of a zinc center tetrahedrally coordinated with 2-methylimidazolate linkers, has garnered extensive attention as a selective filler for propylene-selective mixed-matrix membranes (MMMs). Recently, we reported an innovative and scalable MMM fabrication approach, termed "phase-inversion in sync with in situ MOF formation" (PIMOF), aimed at addressing the prevailing challenges in MMM processing. In this study, we intend to investigate the effect of additives, specifically sodium formate and 1,4-butanediol, on the modification of ZIF-8 filler formation within the polymer matrix in order to further improve the separation performance of the asymmetric MMMs prepared by the PIMOF. Remarkably, MMMs prepared with sodium formate as an additive in the coagulation bath exhibited an unprecedented C3H6/C3H8 separation factor of 222.5 ± 1.8 with a C3H6 permeance of 10.1 ± 0.3 GPU, surpassing that of MMMs prepared without additives (a C3 separation factor of 57.7 ± 11.2 with a C3 permeance of 22.5 ± 4.5 GPU). Our computational work complements the experimental investigation by studying the effect of ZIF-8 nanoparticle size on the specific surface interaction energy and apertures of ZIF-8. Calculations indicate that by having smaller ZIF-8 nanoparticles, stronger interactions are present with the polymer affecting the aperture of ZIF-8 nanoparticles. This reduction in aperture size is expected to improve selectivity toward propylene by reducing the permeability of propylene. These results represent a significant advancement, surpassing the performance of all previously reported propylene-selective MMMs and most high-quality polycrystalline ZIF-8 membranes. The notably enhanced separation performance primarily arises from the formation of exceedingly small ZIF-8-like particles with an amorphous or poorly crystalline structure, corroborated by our computational work.

Tunable Zeolitic Imidazolate Framework-8 Nanoparticles for Biomedical Applications

Zeolite imidazole framework-8 (ZIF-8) is the most prestigious one among zeolitic imidazolate framework (ZIF) with tunable dimensions and unique morphological features. Utilizing its synthetic adjustability and structural regularity, ZIF-8 exhibits enhanced flexibility, allowing for a wide range of functionalities, such as loading of nanoparticle components while preserving biomolecules activity. Extensive efforts are made from investigating synthesis techniques to develop novel applications over decades. In this review, the development and recent progress of various synthesis approaches are briefly summarized. In addition, its interesting properties such as adjustable porosity, excellent thermal, and chemical stabilities are introduced. Further, five representative biomedical applications are highlighted based on above physicochemical properties. Finally, the remaining challenges and offered insights into the future outlook are also discussed. This review aims to understand the co-relationships between structures and biomedical functionalities, offering the opportunity to construct attractive materials with promising characteristics.

Bacteria-templated ZIF-8 embedded in polyacrylonitrile nanofibers as a novel sorbent for thin film microextraction of benzoylurea insecticides

In the present work, the rod-like ZIF-8 (ZIF8@E coli) was prepared by fast, easy and environmentally friendly method of biomimetic mineralization with Escherichia coli bacteria as a bio-template and was exploited for the first time in the microextraction. In this regard, electrospun nanofiber mats of polyacrylonitrile (PAN) and ZIF8@E coli were prepared by electrospinning method and used as a new sorbent for thin film microextraction (TFME) of benzoylurea insecticides such as Hexaflumuron and Teflubenzuron as model analytes. The PAN/ZIF8@E coli nanocomposite was characterized using electron scanning microscopy and various spectroscopy techniques. Factors affecting the proposed extraction method were screened and optimized using the experiment design strategy. Then, the model analytes were measured by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detector after microextraction. Satisfactory figures of merit were obtained for suggested TFME-HPLC-UV under optimum conditions. The suitable linearity varied in the range of 0.5-200 μg L-1 with R2 greater than 0.9968. The limit of detections for Hexaflumuron and Teflubenzuron were 0.12 and 0.15 μg L-1, respectively. The application of the method in the real sample was investigated by analyzing the selected analytes in environmental water and food samples. The spiking recovery of the selected analytes varied in the range of 93.0-109.8 % (RSD≤7.68). The results confirm the efficient application of this new sorbent in TFME approach. Considering the high availability, ease of production, and environmental friendliness of bacteria along with the significant improvement of metal-organic framework (MOF) growth efficiency, biomimetic mineralization is expected to be efficient method for the synthesis of ordered MOFs for use in extraction fields.

Quality-dependent performance of hydrophobic ZIF-67 upon high-pressure water intrusion-extrusion process

Zeolitic imidazolate framework (ZIF) microporous materials have already been employed in many fields of energetic and environmental interest since the last decade. The commercial scale production of some of these materials makes them more accessible for their implementation in industrial processes; however, their massive synthesis may entail modifications to the preparation protocols, which may result in a loss in the optimization of this process and a drop in the material's quality. This fact may have implications for the performance of these materials during their lifetime, especially when they are used in applications such as energy dissipation, in which they are subjected to several operating cycles under high pressures. This study focuses on ZIF-67, a material that has demonstrated in the past its ability to dissipate energy through the water intrusion-extrusion process under high pressure. Two ZIF-67 samples were synthesized using different protocols, and 2 batches of different qualities (labelled as high quality (HQ) and low quality (LQ)) were obtained and analysed by water porosimetry to study their performance in the intrusion-extrusion process. Unexpectedly, minor structural differences, which are typically neglected especially under production conditions, had a dramatic effect on their performance. The results presented in this study reiterate the importance of quality control with respect to reproducibility of experimental results. In a broader perspective, they are critical to the technology transfer from academia to industry.

Detection of pioglitazone based on dual-emission ratiometric fluorescence probe consisting of ZIF8 and to L-ASC-AuNP/DA nanoparticles

A simple and sensitive dual-emission ratiometric fluorescent probe was developed using zeolitic imidazolate framework 8 (ZIF8) and L-ascorbic acid Au-doped dopamine nanoparticles (ZIF8/L-ASC-AuNP/DA NP) for the determination of pioglitazone (Pio), an oral hypoglycemic agent and insulin sensitizer, in real samples. The prepared system was based on the Pio-enhanced dual-emission intensity of ZIF8/L-ASC-AuNP/DA NP. The potential impact of various parameters on the system's emission intensity was tested. According to the findings, there is a strong linear correlation between the system's turn-on fluorescence intensity and Pio concentrations in the range 0.3 nM to 30.0 μM. The obtained value for the limit of detection (LOD) was 0.14 nM. In addition, the intra- and inter-day accuracy of the nanoprobe was studied and the findings revealed satisfactory precision and accuracy of the system. The short-term and freeze-thaw stability of Pio in plasma samples was evaluated and the results indicated the high stability of the developed nanoprobe under the test conditions. Pio was accurately detected in human plasma samples under ideal conditions with analytical recoveries in the range 86.0 - 109.3%. The results showed that the devised probe may be employed as an easy, sensitive, and precise approach for detecting Pio in real samples.

Design of Zeolitic Imidazolate Framework-8-Functionalized Capacitive Micromachined Ultrasound Transducer Gravimetric Sensors for Gas and Hydrocarbon Vapor Detection

A capacitive micromachined ultrasound transducer (CMUT) was engineered and functionalized with zeolitic imidazolate framework-8 (ZIF-8) dispersed in a photoresist AZ1512HS (AZ) matrix to function as a gravimetric gas sensor. The sensor response was recorded in the presence of nitrogen, argon, carbon dioxide, and methane gases as well as water, acetylene, a propane/butane mixture, n-hexane, gasoline, and diesel vapors. The photoresist matrix alone was found to have a negligible response to all the gases and vapors, except for water vapor. No visible difference in sensor response was detected when switching from nitrogen to methane gas. However, a strong shift in the sensor resonance frequency was observed when exposed to higher hydrocarbons, ranging from 1 kHz for acetylene to 7.5 kHz for gasoline. Even longer-chain hydrocarbons, specifically kerosene and more so diesel, had a significantly reduced sensor frequency shift compared with gasoline. Sensors functionalized with a thin film of AZ+ZIF-8 demonstrated higher sensitivity in their response to a hydrocarbon molecular mass than without functionalization.

ZIF-8/Graphene Oxide Hybrid Membranes as Breathable and Protective Barriers against Chemical Warfare Agents

Personal protective equipment against chemical warfare agents and other toxic chemicals must be protective, be breathable, and have a low thermal burden. Selectively permeable membranes are promising candidates for such equipment. In this study, a hybrid membrane consisting of a continuous and thin zeolitic imidazolate framework (ZIF)-8 layer on an oxygen-rich small-flake graphene oxide layer was produced using a simple and scalable synthesis method. The small intrinsic pores of ZIF-8 allow it to selectively separate chemicals via size exclusion while permitting water vapor to permeate out. The ZIF-8/graphene oxide membrane had high selectivity for the penetration of water vapor over nerve agent simulants (ratio of dimethyl methylphosphonate to water vapor transmittance rates of ∼312) with a high water vapor transmittance rate of 3000 g m-2 day-1. This protective barrier layer is a promising material for next-generation protective clothing with enhanced comfort and operability.

Synthesis of Zeolitic Imidazolate Framework-8 Using Glycerol Carbonate

In this study, we show that glycerol carbonate (GlyC), a bio-based derivative of glycerol, can be used as a suitable green solvent for the synthesis of metal-organic frameworks (MOFs). In particular, a zinc-based zeolitic imidazolate framework-8 (ZIF-8) was synthesized by exploring several different experimental conditions (in terms of temperature, reaction time, and reactants' concentrations) to find that the yield of the reaction and the quality of the products, measured in terms of crystallinity, surface area, and porosity, were in line with those obtained in the most commonly (non-green) used solvents. GlyC was also found to be reusable for several cycles, maintaining the same original quality as a solvent for the synthesis. Finally, some indicators for the assessment of the greenness of a process (E-factor and PMI) revealed a milder environmental impact of GlyC with respect to other solvents.

Establishing a high-performance anti-fouling PEI-ZIF-PAA membrane with improved Lewis acid-base interactions and hydrophilicity

Membrane fouling and the trade-off between membrane permeability and selectivity restrict the potential applications of membrane filtration for water treatment. ZIF-8 was found having great permeability and antibiofouling performance, but with issue on particle aggregation makes it difficult to achieve high ZIFs loading and fabricate a defect-free molecular sieving membrane in previous research. In this study, we formed a scalable antibiofouling surface with improved permeability and fouling resistance on a PEI-ZIF-PAA membrane using a layer-by-layer assembly technique. The synergistic effects of being sandwiched between two different polyelectrolyte layers with opposite charges endowed the ZIF nanoparticles with improved stability and scalability for membrane modification. The PEI-ZIF-PAA membrane exhibited a satisfactory water flux of 120.78 LMH, which was 46.97% higher than that of the pristine PES membrane. The normalized water flux loss was serious in the absence of ZIF-8, and the flux increased with the ZIF-8 concentration. Antifouling tests suggested that the PEI-ZIF-PAA membrane possessed good antifouling performance due to the much higher surface hydrophilicity and positive Lewis acid-base interactions with foulants. The HA rejection increased with the ZIF-8 concentration and reached a maximum of 92.1% in the presence of 1.00% (w/v) ZIF-8. The membrane regeneration was tested under physical and chemical cleaning with flux recovery rates of about 85% and 95%. XDLVO analysis showed that the total interaction energy between HA and the PEI-ZIF-8-PAA membrane was 26.45 mJ/m², and the superior antifouling performance was mainly attributed to Lewis acid-base interactions. This study indicates that ZIF-8 nanocrystals are promising materials for fabricating novel membranes for sewage treatment.

Synthesis of ZIF-8 tubular membrane via solvent evaporation seeding coupled with microwave assisted heating method for separation of small molecule gases

In this work, we systematically study the performance of tubular ZIF-8 membranes in the separation of small molecules including H₂, CO₂, N₂ and CH_4. The tubular ZIF-8 membranes were synthesized on α-alumina support via novel dual approach known as solvent evaporation seeding coupled with microwave assisted growth. The durations for the growth of the seed layer through solvent evaporation and membrane layer via microwave heating were varied. The crystallinity and morphology of the resultant membranes were evaluated by using XRD, SEM and IFM analyses. The performance of the resultant tubular ZIF-8 membranes was assessed for small molecule gases permeation at various pressures and temperatures. Highest flux ranging from 0.02 to 0.61 mol/m²s were obtained for gases CO₂, CH₄, N₂, and H₂ at feed pressure of 10 bar, whereas highest ideal selectivity of 12.4, 9.3 and 6.9 were obtained for H₂/CH_4, CO₂/CH₄, N₂/CH₄, respectively, at feed pressure of 10 bar and temperature of 30 °C. This work reveals that the tubular ZIF-8 membrane can be synthesized via a feasible and reproducible solvent evaporation seeding coupled with microwave assisted growth method, which can be further explored for the upscaling of the ZIF-8 tubular membrane in pilot scale for gas separation application.

Metal organic framework encapsulated tamavidin-Gluc reporter: application in COVID-19 spike antigen bioluminescent immunoassay

Enzyme linked immunosorbent assay (ELISA) is one of the most utilized serological methods to diagnose and identify etiologic agents of many infectious diseases and other physiologically important analytes. ELISA can be used either alone or adjunct to other diagnostic methods such as molecular arrays, and other serological techniques. Most ELISA assays utilize reagents that are proteinaceous in nature, which are not very stable and require cold-chain transport systems. Development of a desirable immunoassay requires stability of reagents used and its ability to be stored at room temperature without sacrificing the activity of the reagents or the protein of interest. Metal organic frameworks (MOFs) are a rapidly emerging and evolving class of porous polymeric materials used in a variety of biosensor applications. In this study, we introduce the use of MOFs to stabilize a universal reporter fusion protein, specifically, avidin-like protein (Tam-avidin2) and the small bioluminescent protein Gaussia luciferase (Gluc) forming the fusion reporter, tamavidin2-Gluc (TA2-Gluc). This fusion protein serves as a universal reporter for any assays that utilize biotin-avidin binding strategy. Using SARS-CoV2 S1 spike antigen as the model target antigen, we demonstrated that encapsulation of TA2-Gluc fusion protein using a nano-porous material, zeolitic imidazolate framework-8 (ZIF-8), allows us to store and preserve this reporter protein at room temperature for over 6 months and use it as a reporter for an ELISA assay. Our optimized assay was validated demonstrating a 0.26 μg mL-1 limit of detection, high reproducibility of assay over days, detection of spiked non-virulent SARS-COV2 pseudovirus in real sample matrix, and detection in real COVID-19 infected individuals. This result can lead to the utilization of our TA2-Gluc fusion protein reporter with other assays and potentially in diagnostic technologies in a point-of-care setting.

Hydrogenation of pyrolysis gasoline by novel Ni-doped MOF derived catalysts from ZIF-8 and ZIF-67

Pyrolysis gasoline is the valuable byproduct of the thermal breakdown of heavier oil fractions in an olefin unit with high aromatic content. To separate such aromatic components, firstly, this product should be hydrogenated. In this contribution, new nanostructure catalysts derived from the zeolitic metal–organic framework, namely ZIF-8 and ZIF-67, were used to investigate their hydrogenation capability. Owing to its great hydrogenation capability of Nickle, the structures of the ZIF-8 and ZIF-67 were improved by Nickle through in situ synthesis. Moreover, to enhance the pore size of catalysts and their electronic properties, the synthesized catalysts were pyrolyzed under nitrogen media at 450 °C, and five catalysts, namely Co/NC, ZnCo/NC, ZnNi/NC, CoNi/NC, and ZnCoNi/NC were created. Results indicated that the CoNi/NC showed a superior hydrogenation performance (69.5% conversion of total olefins) to others. In addition, the synthesized catalysts without the carbonization process had no conversion in the hydrogenation process because there is no active site in these structures. The current synthesized catalysts can compete with the costly Pt or Pd-based hydrogenation catalysts due to their high surface area and great electronic properties.

Facile Fabrication of α-Alumina Hollow Fiber-Supported ZIF-8 Membrane Module and Impurity Effects on Propylene Separation Performance

The separation of C₃ olefin and paraffin, which is essential for the production of propylene, can be facilitated by the ZIF-8 membrane. However, the commercial application of the membrane has not yet been achieved because the fabrication process does not meet industrial regulatory criteria. In this work, we provide a straightforward and cost-effective membrane fabrication technique that permits the rapid synthesis of ZIF-8 hollow fiber membranes. The scalability of the technology was confirmed by the incorporation of three ZIF-8 hollow fiber membranes into a single module using an introduced fiber mounting methodology. The molecular sieving characteristics of the ZIF-8 membrane module on a binary combination of C3 olefin and paraffin (C₃H₆/C₃H₈ selectivity of 110 and a C₃H₆ permeance of 13 GPU) were examined at atmospheric conditions. In addition, the high-pressure performance of these membranes was demonstrated at a 5 bar of equimolar binary feed pressure with a C₃H₆/C₃H₈ selectivity of 55 and a C₃H₆ permeance of 9 GPU due to propylene adsorption site saturation. To further accurately portray the separation performance of the membrane on an actual industrial feed, the effect of impurities (ethylene, ethane, butylene, i-butane, and n-butane), which can be found in C3 splitters, was investigated and a considerable decrement (~15%) in the propylene permeance upon an interaction with C4 hydrocarbons was confirmed. Finally, the long-term stability of the ZIF-8 membrane was confirmed by continuous operation for almost a month without any loss of its initial performance (C₃H₆/C₃H₈ separation factor of 110 and a C₃H₆ permeance of 13 GPU). From an industrial point of view, this straightforward technique could offer a number of merits such as a short synthesis time, minimal chemical requirements, and excellent reproductivity.

Co/ZnO/Nitrogen-Doped Carbon Composite Anode Derived from Metal Organic Frameworks for Lithium Ion Batteries

Through high-temperature sintering and carbonization, two Co/ZnO nitrogen-doped porous carbon (NC) composites derived from ZIF-8 and ZIF-67 were manufactured for use as anodes for Li ion batteries: composite-type Co/ZnO-NC and core-shell-type Co@ZnO-NC. X-ray diffraction analysis, scanning electron microscopy, and the Brunauer–Emmett–Teller (BET) method were performed to identify the pore distribution and surface morphology of these composites. The findings of the BET method indicated that the specific surface area of Co/ZnO-NC was 350 m²/g, which was twice that of Co@ZnO-NC. Electrochemical measurements revealed that Co@ZnO-NC and Co/ZnO-NC had specific capacities of over 400 mAh g⁻¹ at a current density 0.2 A g⁻¹ after 50 cycles. After 100 cycles, Co/ZnO-NC exhibited a reversible capacity of 411 mAh g⁻¹ at a current density of 0.2 A g⁻¹ and Co@ZnO-NC had a reversible capacity of 246 mAh g⁻¹ at a current density of 0.2 A g⁻¹. The results indicated that Co/ZnO-NC exhibited superior electrochemical performance to Co@ZnO-NC as a potential anode for use in Li ion batteries.

Designing of robust and sensitive assay via encapsulation of highly emissive and stable blue copper nanocluster into zeolitic imidazole framework (ZIF-8) with quantitative detection of tetracycline

Metal–organic frameworks (MOFs) with high stability and porosity have gained great attention in bioanalysis due to their potential in improving sensitivity and robustness of assays. Herein, to improve both the stability and the emission intensity of Cu nanoclusters (CuNCs), in situ entrapment strategy of CuNCs into zeolitic imidazolate framework-8 (ZIF-8) is described. Blue emissive and stable CuNCs was prepared, for the first time, using thiamine hydrochloride as capping agents, and showed strong and stable emission at 440 nm when excited at 375 nm with fluorescence quantum yields 12%. Encapsulation of CuNC into ZIF-8 showed dramatic enhancement of the fluorescence intensity up to 53% fluorescence quantum yield. Furthermore, the CuNCs@ZIF-8 possesses better stability (more than three months) due to protective and confinement effect of MOFs. Upon the addition of tetracycline to CuNCs@ZIF-8 solution, the blue emission intensity was significantly decreased. The fluorescence ratio (Fo/F) against the concentration of tetracycline exhibited a satisfactory linear relationship from 1.0 to 10.0 µM with a detection limit (LOD) of 0.30 µM. The current probe was applied for quantification of tetracycline in drug sample with satisfactory accuracy and precision.

Graphical abstract

High-aspect ratio zeolitic imidazolate framework (ZIF) nanoplates for hydrocarbon separation membranes

Metal-organic frameworks with high aspect ratios have the potential to yield high-performance gas separation membranes. We demonstrate the scalable synthesis of high–aspect ratio zeolitic imidazolate framework (ZIF)–8 nanoplates via a direct template conversion method in which high aspect ratio–layered Zn hydroxide sheets [Zn₅(NO₃)₂(OH)₈] were used as the sacrificial precursor. Successful phase conversion occurs as a result of the collaboration of low template stability and delayed delivery of 2-methylimidazole in weakly interacting solvents, particularly using acetone. When the ZIF-8 nanoplates with an average aspect ratio of 20 were shear aligned in the 6FDA-DAM polymer matrix by bar coating, the separation performance for propylene/propane far surpassed that of the previously reported mixed matrix and polymeric membranes, showing a propylene permeability of 164 Barrer and selectivity of 33.4 at 40 weight % loadings.

Preparation of Ag@ZIF-8@PP Melt-Blown Nonwoven Fabrics: Air Filter Efficacy and Antibacterial Effect

Serving as matrices, polypropylene (PP) melt-blown nonwoven fabrics with 4% electrostatic electret masterbatch were incorporated with a 6%, 10%, 14%, or 18% phosphorus-nitrogen flame retardant. The test results indicate that the incorporation of the 6% flame retardant prevented PP melt-blown nonwoven fabrics from generating a molten drop, which, in turn, hampers the secondary flame source while increasing the fiber diameter ratio. With a combination of 4% electrostatic electret masterbatch and the 6% flame retardant, PP melt-blown nonwoven fabrics were grafted with ZIF-8 and Ag@ZIF-8. The antibacterial effect of ZIF-8 and Ag@ZIF-8 was 40% and 85%, respectively. Moreover, four reinforcing measures were used to provide Ag@ZIF-8 PP melt-blown nonwoven fabrics with synergistic effects, involving lamination, electrostatic electret, and Ag@ZIF-8 grafting, as well as a larger diameter because of the addition of phosphorus-nitrogen flame retardants. As specified in the GB2626-2019 and JIS T8151-2018 respiratory resistance test standards, with a constant 60 Pa, Ag@ZIF-8 PP melt-blown nonwoven membranes were tested for a filter effect against PM 0.3. When the number of lamination layers was five, the filter effect was 88 ± 2.2%, and the respiratory resistance was 51 ± 3.6 Pa.

Novel Cellulose Triacetate (CTA)/Cellulose Diacetate (CDA) Blend Membranes Enhanced by Amine Functionalized ZIF-8 for CO2 Separation

Currently, cellulose acetate (CA) membranes dominate membrane-based CO₂ separation for natural gas purification due to their economical and green nature. However, their lower CO₂ permeability and ease of plasticization are the drawbacks. To overcome these weaknesses, we have developed high-performance mixed matrix membranes (MMMs) consisting of cellulose triacetate (CTA), cellulose diacetate (CDA), and amine functionalized zeolitic imidazolate frameworks (NH₂-ZIF-8) for CO₂ separation. The NH₂-ZIF-8 was chosen as a filler because (1) its pore size is between the kinetic diameters of CO₂ and CH₄ and (2) the NH₂ groups attached on the surface of NH₂-ZIF-8 have good affinity with CO₂ molecules. The incorporation of NH₂-ZIF-8 in the CTA/CDA blend matrix improved both the gas separation performance and plasticization resistance. The optimized membrane containing 15 wt.% of NH₂-ZIF-8 had a CO₂ permeability of 11.33 Barrer at 35 °C under the trans-membrane pressure of 5 bar. This is 2-fold higher than the pristine membrane, while showing a superior CO₂/CH₄ selectivity of 33. In addition, the former had 106% higher CO₂ plasticization resistance of up to about 21 bar and an impressive mixed gas CO₂/CH₄ selectivity of about 40. Therefore, the newly fabricated MMMs based on the CTA/CDA blend may have great potential for CO₂ separation in the natural gas industry.

ZIF-67-based catalysts for oxygen evolution reaction

As a new type of crystalline porous material, the imidazole zeolite framework (ZIF) has attracted widespread attention due to its ultra-high surface area, large pore volume, and unique advantage of easy functionalization. Developing different methods to control the shape and composition of ZIF is very important for its practical application as catalyst. In recent years, nano-ZIF has been considered an electrode material with excellent oxygen evolution reaction (OER) performance, which provides a new way to research electrolyzed water. This review focuses on the morphological engineering of the original ZIF-67 and its derivatives (core-shell, hollow, and array structures) through doping (cation doping, anion doping, and co-doping), derivative composition engineering (metal oxide, phosphide, sulfide, selenide, and telluride), and the corresponding single-atom catalysis. Besides, combined with DFT calculations, it emphasizes the in-depth understanding of actual active sites and provides insights into the internal mechanism of enhancing the OER and proposes the challenges and prospects of ZIF-67 based electrocatalysts. We summarize the application of ZIF-67 and its derivatives in the OER for the first time, which has significantly guided research in this field.

Revealing Anion Adsorption Mechanism for Coating Layer on Separator toward Practical Li Metal Batteries

Using a coating layer to modify the separator in a practical Li metal battery has attracted wide attention; however, its function on Li-ion diffusion and Li plating/stripping has not been systematically investigated. Herein, in situ electrochemical Raman characterization using modified coin cell configuration is employed to directly reveal the anion adsorption mechanism of the coating layer. The adsorption ability of the MOF-based coating layer on the commercial separator is able to preserve high concentration of anions near the electrolyte/Li interface, which generates high local Li-ion concentration that delays the drain of Li⁺ to uniform Li plating. The feasible and large-area fabrication of GO/ZIF-8-modified separator enables the assembly of pouch cell strictly following practical parameters. 0.4 Ah pouch cell (Li/NCM811) delivers stable capacity for over 100 cycles. The deep understanding of the mechanism of how a coating layer affects Li plating behavior is helpful for the designing and preparation of high-performance separators for Li metal batteries.

Recent Progress in a Membrane-Based Technique for Propylene/Propane Separation

The similar physico-chemical properties of propylene and propane molecules have made the separation process of propylene/propane challenging. Membrane separation techniques show substantial prospects in propylene/propane separation due to their low energy consumption and investment costs, and they have been proposed to replace or to be combined with the conventional cryogenic distillation process. Over the past decade, organosilica membranes have attracted considerable attention due to their significant features, such as their good molecular sieving properties and high hydrothermal stability. In the present review, holistic insight is provided to summarize the recent progress in propylene/propane separation using polymeric, inorganic, and hybrid membranes, and a particular inspection of organosilica membranes is conducted. The importance of the pore subnano-environment of organosilica membranes is highlighted, and future directions and perspectives for propylene/propane separation are also provided.