N-Carbon-Doped Binary Nanophase of Metal Oxide/Metal-Organic Framework for Extremely Sensitive and Selective Gas Response

Metal-organic frameworks (MOFs), which are highly ordered structures exhibiting sub-nanometer porosity, possess significant potential for diverse gas applications. However, their inherent insulative properties limit their utility in electrochemical gas sensing. This investigation successfully modifies the electrical conductivity of zeolitic imidazolte framework-8 (ZIF-8) employing a straightforward surface oxidation methodology. A ZIF-8 polycrystalline layer is applied on a wafer-scale oxide substrate and subjects to thermal annealing at 300 °C under ambient air conditions, resulting in nanoscale oxide layers while preserving the fundamental properties of the ZIF-8. Subsequent exposure to NO2 instigates the evolution of an electrically interconnected structure with the formation of electron-rich dopants derived from the decomposition of nitrogen-rich organic linkers. The N-carbon-hybridized ZnO/ZIF-8 device demonstrates remarkable sensitivity (≈130 ppm-1 ) and extreme selectivity in NO2 gas detection with a lower detection limit of 0.63 ppb under 150 °C operating temperature, surpassing the performance of existing sensing materials. The exceptional performances result from the Debye length scale dimensionality of ZnO and the high affinity of ZIF-8 to NO2 . The methodology for manipulating MOF conductivity through surface oxidation holds the potential to accelerate the development of MOF-hybridized conductive channels for a variety of electrical applications.

ZIF-L to ZIF-8 Transformation: Morphology and Structure Controls

The control of the structure, shape, and components of metal-organic frameworks, in which metal ions and organic ligands coordinate to form crystalline nanopore structures, plays an important role in the use of many electrochemical applications, such as energy storage, high-performance photovoltaic devices, and supercapacitors. In this study, systematic controls of synthesis variables were performed to control the morphology of ZIF-8 during the ZIF-L-to-ZIF-8 transformation of ZIF-L, which has the same building block as ZIF-8 but forms a two-dimensional structure. Furthermore, additional precursors or surfactants (Zn²⁺, 2mIm, and CTAB) were introduced during the transition to determine whether the alteration could be regulated. Lastly, the partial substitution insertion of a new organic precursor, 2abIm, during the ZIF-L-to-ZIF-8 transformation of ZIF-L was achieved, and modulation of the adsorption and pore characteristics (suppression of gate-opening properties of ZIF-8) has been confirmed.

Facile Fabrication of α-Alumina Hollow Fiber-Supported ZIF-8 Membrane Module and Impurity Effects on Propylene Separation Performance

The separation of C₃ olefin and paraffin, which is essential for the production of propylene, can be facilitated by the ZIF-8 membrane. However, the commercial application of the membrane has not yet been achieved because the fabrication process does not meet industrial regulatory criteria. In this work, we provide a straightforward and cost-effective membrane fabrication technique that permits the rapid synthesis of ZIF-8 hollow fiber membranes. The scalability of the technology was confirmed by the incorporation of three ZIF-8 hollow fiber membranes into a single module using an introduced fiber mounting methodology. The molecular sieving characteristics of the ZIF-8 membrane module on a binary combination of C3 olefin and paraffin (C₃H₆/C₃H₈ selectivity of 110 and a C₃H₆ permeance of 13 GPU) were examined at atmospheric conditions. In addition, the high-pressure performance of these membranes was demonstrated at a 5 bar of equimolar binary feed pressure with a C₃H₆/C₃H₈ selectivity of 55 and a C₃H₆ permeance of 9 GPU due to propylene adsorption site saturation. To further accurately portray the separation performance of the membrane on an actual industrial feed, the effect of impurities (ethylene, ethane, butylene, i-butane, and n-butane), which can be found in C3 splitters, was investigated and a considerable decrement (~15%) in the propylene permeance upon an interaction with C4 hydrocarbons was confirmed. Finally, the long-term stability of the ZIF-8 membrane was confirmed by continuous operation for almost a month without any loss of its initial performance (C₃H₆/C₃H₈ separation factor of 110 and a C₃H₆ permeance of 13 GPU). From an industrial point of view, this straightforward technique could offer a number of merits such as a short synthesis time, minimal chemical requirements, and excellent reproductivity.

All-Nanoporous Hybrid Membranes: Incorporating Zeolite Nanoparticles and Nanosheets with Zeolitic Imidazolate Framework Matrices

Metal-organic framework (MOF) membranes have attractive molecular separation properties but require challenging thin-film deposition techniques on expensive/specialty supports to obtain high performance relative to conventional polymer membranes. We demonstrate and analyze in detail the new concept of all-nanoporous hybrid membranes (ANHMs), which combines two or more nanoporous materials of different morphologies into a single membrane without the use of any polymeric materials. This allows access to a previously inaccessible region of very high permeability and selectivity properties, a feature that enables ANHMs to show high performance even when fabricated with simple coating and solvent evaporation methods on low-cost supports. We synthesize several types of ANHMs that combine the MOF material ZIF-8 with the high-silica zeolite MFI (the latter being employed in both nanoparticle and nanosheet forms). We show that continuous ANHMs can be obtained with high (∼50%) volume fractions of both MOF and zeolite components. Analysis of the multilayer microstructures of these ANHMs by multiple techniques allows estimation of the propylene/propane separation properties of individual ANHM layers, providing initial insight into the dramatically increased permeability and selectivity observed in ANHMs in relation to single-phase nanoporous membranes.

ZIF-8 Membrane Separation Performance Tuning by Vapor Phase Ligand Treatment

Vapor phase ligand treatment (VPLT) of 2-aminobenzimidazole (2abIm) for 2-methylimidazole (2mIm) in ZIF-8 membranes prepared by two different methods (LIPS: ligand induced permselectivation and RTD: rapid thermal deposition) results in a notable shift of the molecular level cut-off to smaller molecules establishing selectivity improvements from ca. 1.8 to 5 for O₂ /N₂ ; 2.2 to 32 for CO₂ /CH₄ ; 2.4 to 24 for CO₂ /N₂ ; 4.8 to 140 for H₂ /CH₄ and 5.2 to 126 for H₂ /N₂ . Stable (based on a one-week test) oxygen-selective air separation performance at ambient temperature, 7 bar(a) feed, and 1 bar(a) sweep-free permeate with a mixture separation factor of 4.5 and oxygen flux of 2.6×10^-3  mol m^-2  s^-1 is established. LIPS and RTD membranes exhibit fast and gradual evolution upon a 2abIm-VPLT, respectively, reflecting differences in their thickness and microstructure. Functional reversibility is demonstrated by showing that the original permeation properties of the VPLT-LIPS membranes can be recovered upon 2mIm-VPLT.

ZIF-8 Membranes via Interfacial Microfluidic Processing in Polymeric Hollow Fibers: Efficient Propylene Separation at Elevated Pressures

Propylene/propane (C3H6/C3H8) separations are performed on a large scale by energy-intensive distillation processes. Membranes based on metal-organic framework (MOF) molecular sieves, such as zeolitic imidazolate framework-8 (ZIF-8), offer the potential to perform these separations at considerably lower cost. However, the fabrication of scalable ZIF-8 membranes with high performance at elevated pressures and temperatures is challenging. We report the fabrication of high-quality ZIF-8 hollow fiber membranes in engineered polymeric hollow fibers via the interfacial microfluidic membrane processing (IMMP) technique. Control of fiber microstructure, as well as optimization of IMMP conditions, allow us to achieve a C3H6/C3H8 separation factor of 180 (at 1 bar and 25 °C), which remains high (60) at 120 °C. Furthermore, high-pressure operation of these membranes was investigated. Detailed permeation measurements indicate excellent suppression of defects at higher pressures up to 9.5 bar, allowing a C3H6/C3H8 separation factor of 90 at 9.5 bar. The membranes also display a 4-fold increase in flux at 9.5 bar as compared to operation at 1 bar. The long-term stability of the ZIF-8 hollow fiber membranes is demonstrated by continuous operation over a month without loss of C3H6 permeance or selectivity.

Separation membranes. Interfacial microfluidic processing of metal-organic framework hollow fiber membranes

Molecular sieving metal-organic framework (MOF) membranes have great potential for energy-efficient chemical separations, but a major hurdle is the lack of a scalable and inexpensive membrane fabrication mechanism. We describe a route for processing MOF membranes in polymeric hollow fibers, combining a two-solvent interfacial approach for positional control over membrane formation (at inner and outer surfaces, or in the bulk, of the fibers), a microfluidic approach to replenishment or recycling of reactants, and an in situ module for membrane fabrication and permeation. We fabricated continuous molecular sieving ZIF-8 membranes in single and multiple poly(amide-imide) hollow fibers, with H2/C3H8 and C3H6/C3H8 separation factors as high as 370 and 12, respectively. We also demonstrate positional control of the ZIF-8 films and characterize the contributions of membrane defects and lumen bypass.

Deletion of the Kv2.1 delayed rectifier potassium channel leads to neuronal and behavioral hyperexcitability

The Kv2.1 delayed rectifier potassium channel exhibits high-level expression in both principal and inhibitory neurons throughout the central nervous system, including prominent expression in hippocampal neurons. Studies of in vitro preparations suggest that Kv2.1 is a key yet conditional regulator of intrinsic neuronal excitability, mediated by changes in Kv2.1 expression, localization and function via activity-dependent regulation of Kv2.1 phosphorylation. Here we identify neurological and behavioral deficits in mutant (Kv2.1(-/-) ) mice lacking this channel. Kv2.1(-/-) mice have grossly normal characteristics. No impairment in vision or motor coordination was apparent, although Kv2.1(-/-) mice exhibit reduced body weight. The anatomic structure and expression of related Kv channels in the brains of Kv2.1(-/-) mice appear unchanged. Delayed rectifier potassium current is diminished in hippocampal neurons cultured from Kv2.1(-/-) animals. Field recordings from hippocampal slices of Kv2.1(-/-) mice reveal hyperexcitability in response to the convulsant bicuculline, and epileptiform activity in response to stimulation. In Kv2.1(-/-) mice, long-term potentiation at the Schaffer collateral - CA1 synapse is decreased. Kv2.1(-/-) mice are strikingly hyperactive, and exhibit defects in spatial learning, failing to improve performance in a Morris Water Maze task. Kv2.1(-/-) mice are hypersensitive to the effects of the convulsants flurothyl and pilocarpine, consistent with a role for Kv2.1 as a conditional suppressor of neuronal activity. Although not prone to spontaneous seizures, Kv2.1(-/-) mice exhibit accelerated seizure progression. Together, these findings suggest homeostatic suppression of elevated neuronal activity by Kv2.1 plays a central role in regulating neuronal network function.