Polyelectrolyte adsorption and layer-by-layer assembly: Electrochemical control

Electrogelation: Controlled Fast Formation of Micrometer-Thick Films from Low-Molecular Weight Hydrogelators

The controlled electrochemical deposition of hydrogels from low-molecular weight hydrogelators (LMWHGs) allows for the defined formation of thin films on electrodes. Here, the deposition of fibrillar networks consisting of N,N',N″-tris(4-carboxyphenylene)-1,3,5-benzenetricarboxamide (BTA) onto ultraflat gold electrodes has been studied. This process, also termed electrogelation, is based on a local change in the pH due to electrolysis of water at the electrode. The protonation of the BTA sodium salt leads to self-assembly into supramolecular fibrillar structures mainly via hydrogen bonding of the uncharged molecules. The resulting hydrogel film was characterized in terms of its thickness by atomic force microscopy (AFM). Two different AFM-based techniques have been used: ex situ imaging of dried films and in situ nanoindentation of the hydrated hydrogel films. The deposition process was studied as a function of gelator concentration, applied potential, and gelation time. These parameters allow control of the film thickness to a high degree of accuracy within a few tenths of nanometers. Film formation takes place in a few seconds at moderate applied potentials, which is beneficial for biomedical applications. The results obtained for the BTA presented here can be transferred to any type of pH-responsive LMWHG and many reversibly formed hydrogel films.

Layer-by-Layer Materials for the Fabrication of Devices with Electrochemical Applications

The construction of nanostructured materials for their application in electrochemical processes, e.g., energy storage and conversion, or sensing, has undergone a spectacular development over the last decades as a consequence of their unique properties in comparison to those of their bulk counterparts, e.g., large surface area and facilitated charge/mass transport pathways. This has driven strong research on the optimization of nanostructured materials for the fabrication of electrochemical devices, which demands techniques allowing the assembly of hybrid materials with well-controlled structures and properties. The Layer-by-Layer (LbL) method is well suited for fulfilling the requirements associated with the fabrication of devices for electrochemical applications, enabling the fabrication of nanomaterials with tunable properties that can be exploited as candidates for their application in fuel cells, batteries, electrochromic devices, solar cells, and sensors. This review provides an updated discussion of some of the most recent advances on the application of the LbL method for the fabrication of nanomaterials that can be exploited in the design of novel electrochemical devices.

Dielectric Spectroscopy can Predict the Effect of External AC Fields on the Dynamic Adsorption of Lysozyme

This report describes the application of dielectric spectroscopy as a simple and fast way to guide protein adsorption experiments. Specifically, the polarization behavior of a layer of adsorbed lysozyme was investigated using a triangular‐wave signal with frequencies varying from 0.5 to 2 Hz. The basic experiment, which can be performed in less than 5 min and with a single sample, not only allowed confirming the susceptibility of the selected protein towards the electric signal but also identified that this protein would respond more efficiently to signals with lower frequencies. To verify the validity of these observations, the adsorption behavior of lysozyme onto optically transparent carbon electrodes was also investigated under the influence of an applied alternating potential. In these experiments, the applied signal was defined by a sinusoidal wave with an amplitude of 100 mV and superimposed to +800 mV (applied as a working potential) and varying the frequency in the 0.1–10000 Hz range. The experimental data showed that the greatest adsorbed amounts of lysozyme were obtained at the lowest tested frequencies (0.1–1.0 Hz), results that are in line with the corresponding dielectric features of the protein.

Single-molecule studies reveal the distinction of strong and weak polyelectrolytes in aqueous solutions

Polyelectrolytes are an important class of functional polymers that have the advantages of both polymers and electrolytes due to the presence of charges, and have prospective applications in many fields. The charge of the backbone is an important factor affecting the properties of polyelectrolytes. Therefore, the complex interactions caused by the charges in polyelectrolyte solutions pose a challenge to the study of polyelectrolyte systems, and there is no consensus on the distinction between the behavior of strong and weak polyelectrolytes in solution. Based on single-molecule force spectroscopy (SMFS), the distinction of strong and weak polyelectrolytes is clarified for the first time at the single molecular level by comparing the single-chain elasticity in different environments. It is expected that the single-molecule study will provide the theoretical and experimental basis for the further application of polyelectrolytes.

Mixed-Matrix Membrane Fabrication for Water Treatment

In recent years, technology for the fabrication of mixed-matrix membranes has received significant research interest due to the widespread use of mixed-matrix membranes (MMMs) for various separation processes, as well as biomedical applications. MMMs possess a wide range of properties, including selectivity, good permeability of desired liquid or gas, antifouling behavior, and desired mechanical strength, which makes them preferable for research nowadays. However, these properties of MMMs are due to their tailored and designed structure, which is possible due to a fabrication process with controlled fabrication parameters and a choice of appropriate materials, such as a polymer matrix with dispersed nanoparticulates based on a typical application. Therefore, several conventional fabrication methods such as a phase-inversion process, interfacial polymerization, co-casting, coating, electrospinning, etc., have been implemented for MMM preparation, and there is a drive for continuous modification of advanced, easy, and economic MMM fabrication technology for industrial-, small-, and bulk-scale production. This review focuses on different MMM fabrication processes and the importance of various parameter controls and membrane efficiency, as well as tackling membrane fouling with the use of nanomaterials in MMMs. Finally, future challenges and outlooks are highlighted.

Particle Deposition to Silica Surfaces Functionalized with Cationic Polyelectrolytes

Positively charged water-solid interfaces are prepared by adsorption of a cationic polyelectrolyte poly(diallyldimethylammonium chloride) (PDADMAC) from aqueous solutions to planar silica substrates. These substrates are characterized by atomic force microscopy (AFM), optical reflectivity, and streaming current measurements. By tuning the amount of adsorbed polyelectrolyte, the surface charge of the substrate can be systematically varied. These substrates are further used to study deposition of sulfate latex nanoparticles, which is also accomplished by optical reflectivity. This deposition process is found to be consistent with an extension of the random sequential adsorption (RSA) model in a semi-quantitative fashion. Such deposition studies were further used to ascertain that the substrates obtained by in situ and ex situ functionalization behave in an identical fashion.

Wire templated electrodeposition of vessel-like structured chitosan hydrogel by using a pulsed electrical signal

Herein, by performing a templated electrodeposition process with an oscillating electrical signal stimulation, a vessel-like structured chitosan hydrogel (diameter about 0.4 mm) was successfully prepared in the absence of salt conditions. Experimental results demonstrated that the hydrogel growth (e.g. the thickness) is linearly correlated with the imposed charge transfer and can be well quantified by using a theoretical moving front model. Morphological observations indicated that the heterogeneous multilayer structure was spatially and temporally controlled by an externally employed electrical signal sequence while the channel structure could be determined by the shaped electrode. Moreover, the oscillating ON-OFF cycles were proved to strongly affect the film structure, leading to a more compact hydrogel coating with a lower water content, higher crystallinity, complex layer architecture and relatively strong mechanical properties that could be easily peeled off as a free-standing hollow tube. Importantly, all the experiments were conducted under mild conditions that allowed additional enhancing materials to be added in to further improve the mechanical and/or biological properties. Thus, this work advances a very promising self-assembly technology for the construction of a multi-functional hydrogel coating and artificial blood vessel regeneration.

Multimodal spectroscopic investigation of the conformation and local environment of biomolecules at an electrified interface

The complex and dynamic interfacial regions between biological samples and electronic components pose many challenges for characterization, including their evolution over multiple temporal and spatial scales. Spectroscopic probes of buried interfaces employing mid-infrared plasmon resonances and time-resolved fluorescence detection in the visible range are used to study the properties of polypeptides adsorbed at the surface of a working electrode. Information from these complementary spectroscopic probes reveals the interplay of solvation, electric fields, and ion concentration on their resulting macromolecular conformations.

A closer physico-chemical look to the Layer-by-Layer electrostatic self-assembly of polyelectrolyte multilayers

The fabrication of polyelectrolyte multilayer films (PEMs) using the Layer-by-Layer (LbL) method is one of the most versatile approaches for manufacturing functional surfaces. This is the result of the possibility to control the assembly process of the LbL films almost at will, by changing the nature of the assembled materials (building blocks), the assembly conditions (pH, ionic strength, temperature, etc.) or even by changing some other operational parameters which may impact in the structure and physico-chemical properties of the obtained multi-layered films. Therefore, the understanding of the impact of the above mentioned parameters on the assembly process of LbL materials plays a critical role in the potential use of the LbL method for the fabrication of new functional materials with technological interest. This review tries to provide a broad physico-chemical perspective to the study of the fabrication process of PEMs by the LbL method, which allows one to take advantage of the many possibilities offered for this approach on the fabrication of new functional nanomaterials.

Sustained delivery of growth factors with high loading efficiency in a layer by layer assembly

Layer by layer (LBL) assembly has garnered considerable interest due to its ability to generate multifunctional films with high tunability and versatility in terms of substrates and polyelectrolytes, allowing the option to use complex devices and drugs. Polyelectrolytes, such as growth factors (GFs), are essential, but costly, delicate, biological molecules that have been used in various tissue regeneration applications. For this reason, the controlled drug delivery of efficiently loaded GFs via LBL assembly (GF-LBL) can contribute to the establishment of cost-effective biologically triggered biomedical applications. We have developed an LBL method to load GFs (specifically, transforming growth factor beta 1, platelet-derived growth factor ββ, and insulin growth factor 1), with up to 90% efficiency approximately, by gas plasma surface activation and tuning the pH to increase the ionic strength of polyelectrolytes. Poly(styrenesulfonate) (PSS) and poly(ethyleneimine) (PEI) have been used to provide the initial necessary charge for multilayer build-up. Heparin and dextran sulphate have been investigated as counter polyelectrolytes to enhance the activity of GFs by protecting their ligands, where heparin resulted in the highest achievable loading efficiency for all GFs. Oxygen gas plasma and acidic pH levels also resulted in a significant increase in GF loading efficiency. The three GFs were released by diffusion and erosion in a controlled manner over lengthy time scales and the bioactivity was maintained for up to 14 days. When tested as implants in vitro, GF-LBL constructs increased fibroblast proliferation, influenced cell morphology and migration, and enhanced myofibroblast differentiation, indicating that the biological functionalities of the GFs were preserved. In conclusion, this developed LBL assembly method can provide a simple drug delivery system, which may yield more effective applications for tissue regeneration as well as biomedical sciences at large.

Electrobiofabrication: electrically based fabrication with biologically derived materials

While conventional material fabrication methods focus on form and strength to achieve function, the fabrication of material systems for emerging life science applications will need to satisfy a more subtle set of requirements. A common goal for biofabrication is to recapitulate complex biological contexts (e.g. tissue) for applications that range from animal-on-a-chip to regenerative medicine. In these cases, the material systems will need to: (i) present appropriate surface functionalities over a hierarchy of length scales (e.g. molecular features that enable cell adhesion and topographical features that guide differentiation); (ii) provide a suite of mechanobiological cues that promote the emergence of native-like tissue form and function; and (iii) organize structure to control cellular ingress and molecular transport, to enable the development of an interconnected cellular community that is engaged in cell signaling. And these requirements are not likely to be static but will vary over time and space, which will require capabilities of the material systems to dynamically respond, adapt, heal and reconfigure. Here, we review recent advances in the use of electrically based fabrication methods to build material systems from biological macromolecules (e.g. chitosan, alginate, collagen and silk). Electrical signals are especially convenient for fabrication because they can be controllably imposed to promote the electrophoresis, alignment, self-assembly and functionalization of macromolecules to generate hierarchically organized material systems. Importantly, this electrically based fabrication with biologically derived materials (i.e. electrobiofabrication) is complementary to existing methods (photolithographic and printing), and enables access to the biotechnology toolbox (e.g. enzymatic-assembly and protein engineering, and gene expression) to offer exquisite control of structure and function. We envision that electrobiofabrication will emerge as an important platform technology for organizing soft matter into dynamic material systems that mimic biology's complexity of structure and versatility of function.

Polymer platforms for micro- and nanomotor fabrication

Artificial, self-propelled micro- and nanomotors are small devices capable of autonomous movement, which are a powerful scientific innovation for solving various medical and environmental issues. Their design is frequently inspired by complex biological structures which are composed of biopolymers and their composites. The choice of materials for nano- and micromachines is crucial for their shape, mechanism and efficiency of propulsion. In this review, we discuss the utilization and fabrication of polymers as soft components of micro- and nanomotors.

Single Molecule Catch and Release: Potential-Dependent Plasmid DNA Adsorption along Chemically Graded Electrode Surfaces

Single molecule detection methods were employed to study the potential dependent adsorption and desorption of dye labeled plasmid DNA along chemical gradients prepared on indium tin oxide (ITO) electrodes. Gradients were formed over silica-base-layer-coated ITO surfaces by exposing them in a directional fashion to aminopropyltrimethoxysilane from the vapor phase. Sessile drop water contact angle measurements, spectroscopic ellipsometry, and X-ray photoelectron spectroscopy were used to verify that a gradient was formed and to characterize its wettability, thickness, and composition as a function of position. The gradient-coated ITO electrode served as both the working electrode and a window into the electrochemical cell used to manipulate DNA adsorption. For single molecule studies, the electrochemical cell was filled with buffer solution containing YOYO-1-labeled plasmid DNA. Fluorescence videos acquired along the gradients depicted clear position-, potential-, and pH-dependent variations in DNA adsorption and desorption. The results demonstrate that DNA adsorption was largely independent of applied potential and irreversible at high amine coverage (i.e., multilayers), under pH ∼ 6 buffer. DNA adsorption became more reversible as the amine coverage decreased and the solution pH increased. Potential dependent control over DNA adsorption and desorption was best achieved at monolayer-to-submonolayer aminosilane coverage under pH ∼ 8 buffer. The knowledge gained in these studies will aid in the development of electrochemical methods for the capture and release of DNA and other polyelectrolytes at electrode surfaces.

Review of Electrochemically Triggered Macromolecular Film Buildup Processes and Their Biomedical Applications

Macromolecular coatings play an important role in many technological areas, ranging from the car industry to biosensors. Among the different coating technologies, electrochemically triggered processes are extremely powerful because they allow in particular spatial confinement of the film buildup up to the micrometer scale on microelectrodes. Here, we review the latest advances in the field of electrochemically triggered macromolecular film buildup processes performed in aqueous solutions. All these processes will be discussed and related to their several applications such as corrosion prevention, biosensors, antimicrobial coatings, drug-release, barrier properties and cell encapsulation. Special emphasis will be put on applications in the rapidly growing field of biosensors. Using polymers or proteins, the electrochemical buildup of the films can result from a local change of macromolecules solubility, self-assembly of polyelectrolytes through electrostatic/ionic interactions or covalent cross-linking between different macromolecules. The assembly process can be in one step or performed step-by-step based on an electrical trigger affecting directly the interacting macromolecules or generating ionic species.

Layer-by-layer assembly of versatile nanoarchitectures with diverse dimensionality: a new perspective for rational construction of multilayer assemblies

Over the past few decades, layer-by-layer (LbL) assembly of multilayer thin films has garnered considerable interest on account of its ability to modulate nanometer control over film thickness and its extensive choice of usable materials for coating planar and particulate substrates, thus allowing for the fabrication of responsive and functional thin films for their potential applications in a myriad of fields. Herein, we provide elaborate information on the current developments of LbL assembly techniques including different properties, molecular interactions, and assembly methods associated with this promising bottom-up strategy. In particular, we highlight the principle for rational design and fabrication of a large variety of multilayer thin film systems including multi-dimensional capsules or spatially hierarchical nanostructures based on the LbL assembly technique. Moreover, we discuss how to judiciously choose the building block pairs when exerting the LbL assembly buildup which enables the engineering of multilayer thin films with tailor-made physicochemical properties. Furthermore, versatile applications of the diverse LbL-assembled nanomaterials are itemized and elucidated in light of specific technological fields. Finally, we provide a brief perspective and potential future challenges of the LbL assembly technology. It is anticipated that our current review could provide a wealth of guided information on the LbL assembly technique and furnish firm grounds for rational design of LbL assembled multilayer assemblies toward tangible applications.

pH-Controlled Electrochemical Deposition of Polyelectrolyte Complex Films

Polyelectrolyte complex (PEC) films made from oppositely charged polymer chains have applications as drug-delivery vehicles, separation membranes, and biocompatible coatings. Conventional layer-by-layer techniques for polyelectrolyte coatings are low-throughput and multistep processes that are quite slow for building films on the order of micrometers. In this work, PEC films are electrochemically deposited using a rapid one-pot method, yielding thick (1 μm) films within short experimental time scales (5 min). This rapid electrodeposition is achieved by exploiting the reduction of hydrogen peroxide at mild electrode potentials that avoid water electrolysis yet trigger the pH-responsive self-assembly of a PEC film composed of poly(acrylic) acid and poly(allylamine) HCl. In situ rheology using an electrochemical quartz crystal microbalance quantified the shear modulus-density product of the deposited layer to be on the order of 10⁷ Pa g/cm³ at a frequency of 15 MHz, with a viscoelastic phase angle of approximately 50°. This electrodeposition scheme furthers the development of PEC coatings for more high-throughput applications, where a fast and efficient single-step approach would be desirable for obtaining coatings.

Innovation in Layer-by-Layer Assembly

Methods for depositing thin films are important in generating functional materials for diverse applications in a wide variety of fields. Over the last half-century, the layer-by-layer assembly of nanoscale films has received intense and growing interest. This has been fueled by innovation in the available materials and assembly technologies, as well as the film-characterization techniques. In this Review, we explore, discuss, and detail innovation in layer-by-layer assembly in terms of past and present developments, and we highlight how these might guide future advances. A particular focus is on conventional and early developments that have only recently regained interest in the layer-by-layer assembly field. We then review unconventional assemblies and approaches that have been gaining popularity, which include inorganic/organic hybrid materials, cells and tissues, and the use of stereocomplexation, patterning, and dip-pen lithography, to name a few. A relatively recent development is the use of layer-by-layer assembly materials and techniques to assemble films in a single continuous step. We name this "quasi"-layer-by-layer assembly and discuss the impacts and innovations surrounding this approach. Finally, the application of characterization methods to monitor and evaluate layer-by-layer assembly is discussed, as innovation in this area is often overlooked but is essential for development of the field. While we intend for this Review to be easily accessible and act as a guide to researchers new to layer-by-layer assembly, we also believe it will provide insight to current researchers in the field and help guide future developments and innovation.

Nanoarchitectonics for Dynamic Functional Materials from Atomic-/Molecular-Level Manipulation to Macroscopic Action

Objects in all dimensions are subject to translational dynamism and dynamic mutual interactions, and the ability to exert control over these events is one of the keys to the synthesis of functional materials. For the development of materials with truly dynamic functionalities, a paradigm shift from "nanotechnology" to "nanoarchitectonics" is proposed, with the aim of design and preparation of functional materials through dynamic harmonization of atomic-/molecular-level manipulation and control, chemical nanofabrication, self-organization, and field-controlled organization. Here, various examples of dynamic functional materials are presented from the atom/molecular-level to macroscopic dimensions. These systems, including atomic switches, molecular machines, molecular shuttles, motional crystals, metal-organic frameworks, layered assemblies, gels, supramolecular assemblies of biomaterials, DNA origami, hollow silica capsules, and mesoporous materials, are described according to their various dynamic functions, which include short-term plasticity, long-term potentiation, molecular manipulation, switchable catalysis, self-healing properties, supramolecular chirality, morphological control, drug storage and release, light-harvesting, mechanochemical transduction, molecular tuning molecular recognition, hand-operated nanotechnology.

Multilayer assembly. Technology-driven layer-by-layer assembly of nanofilms

Multilayer thin films have garnered intense scientific interest due to their potential application in diverse fields such as catalysis, optics, energy, membranes, and biomedicine. Here we review the current technologies for multilayer thin-film deposition using layer-by-layer assembly, and we discuss the different properties and applications arising from the technologies. We highlight five distinct routes of assembly—immersive, spin, spray, electromagnetic, and fluidic assembly—each of which offers material and processing advantages for assembling layer-by-layer films. Each technology encompasses numerous innovations for automating and improving layering, which is important for research and industrial applications. Furthermore, we discuss how judicious choice of the assembly technology enables the engineering of thin films with tailor-made physicochemical properties, such as distinct-layer stratification, controlled roughness, and highly ordered packing.

Graphene-polyelectrolyte multilayer film formation driven by hydrogen bonding

A method for preparing hydrogen bonded multilayer thin films comprised of layer pairs of surfactant stabilized graphene and an anionic polyelectrolyte is described. The films were constructed at low pH using the Layer-By-Layer (LbL) technique, where the adsorption of the cationic polyelectrolyte, polyethyleneimine (PEI) is followed by the sequential alternating adsorption of the anionic polyelectrolyte, polyacrylic acid (PAA) and anionic graphene sheets modified with Pluronic® F108, a polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO-PPO-PEO) surfactant. Quartz Crystal Microbalance (QCM) measurements indicate that film formation was driven by hydrogen bonding between the carboxylic acid group of the PAA and ethylene oxide unit present in the surfactant. QCM measurements and Raman spectra showed evidence of non-linear and linear growth at low and high numbers of adsorbed layers respectively, suggesting overall superlinear film growth. Atomic Force Microscopy (AFM) Quantitative Nanomechanical Mapping (QNM) measurements of the films indicated that the reduced Young's Modulus of the films decreased with increasing numbers of adsorbed layers, reaching a bulk value of 6.07-32.3 MPa for samples with greater than 300 layers of surfactant stabilized graphene and PAA. The films were also shown to deteriorate partially with aqueous solutions at neutral and basic pH. The thin films exhibited features advantageous for use in coatings, such as pH responsiveness in addition to different mechanical properties, surface roughness, and internal structures based on the number of layers adsorbed.

Spatio-Temporal Control of LbL Films for Biomedical Applications: From 2D to 3D

Introduced in the '90s by Prof. Moehwald, Lvov, and Decher, the layer-by-layer (LbL) assembly of polyelectrolytes has become a popular technique to engineer various types of objects such as films, capsules and free standing membranes, with an unprecedented control at the nanometer and micrometer scales. The LbL technique allows to engineer biofunctional surface coatings, which may be dedicated to biomedical applications in vivo but also to fundamental studies and diagnosis in vitro. Initially mostly developed as 2D coatings and hollow capsules, the range of complex objects created by the LbL technique has greatly expanded in the past 10 years. In this Review, the aim is to highlight the recent progress in the field of LbL films for biomedical applications and to discuss the various ways to spatially and temporally control the biochemical and mechanical properties of multilayers. In particular, three major developments of LbL films are discussed: 1) the new methods and templates to engineer LbL films and control cellular processes from adhesion to differentiation, 2) the major ways to achieve temporal control by chemical, biological and physical triggers and, 3) the combinations of LbL technique, cells and scaffolds for repairing 3D tissues, including cardio-vascular devices, bone implants and neuro-prosthetic devices.

Layer-by-layer assembly of aquaporin Z-incorporated biomimetic membranes for water purification

We fabricated a biomimetic nanofiltration (NF) membrane by immobilizing an Aquaporin Z (AqpZ)-incorporated supported lipid bilayer (SLB) on a layer-by-layer (LbL) complex polyelectrolyte membrane to achieve excellent permeability and salt rejection with a high stability. The polyelectrolyte membranes were prepared by LbL assembly of poly(ethylenimine) (PEI) with positive charges and poly(sodium 4-styrenesulfonate) (PSS) with negative charges alternately on a porous hydrolyzed polyacrylonitrile (H-PAN) substrate. AqpZ-incorporated 1,2-dioleloyl-sn-glycero-3-phosphocholine (DOPC)/1,2-dioleoyl-3-trimethylammo-nium-propane (chloride salt) (DOTAP) vesicles with positive charges were deposited on the H-PAN/PEI/PSS polyelectrolytes membrane surface. The resulting biomimetic membrane exhibited a high flux of 22 L·m(-2)·h(-1) (LMH), excellent MgCl2 rejection of ∼97% and NaCl rejection of ∼75% under an operation pressure of 0.4 MPa. Due to the attractive electrostatic interaction between SLB and the polyelectrolyte membrane, the biomimetic membrane showed satisfactory stability and durability as well as stable NF flux and rejection for at least 36 h. In addition, the AqpZ-containing biomimetic membrane was immersed in a 0.24 mM (critical micellar concentration, CMC) Triton X-100 solution for 5 min. The flux and rejection were slightly influenced by the Triton X-100 treatment. The current investigation demonstrated that the AqpZ-incorporated biomimetic membranes fabricated by the LbL method led to excellent separation performances and robust structures that withstand a high operation pressure for a relatively long time.

Reducing Water Vapor Permeability of Poly(lactic acid) Film and Bottle through Layer-by-Layer Deposition of Green-Processed Cellulose Nanocrystals and Chitosan

Layer-by-layer electrostatic self-assembly technique was applied to improve the barrier properties of poly(lactic acid) (PLA) films and bottles. The LbL process was carried out by the alternate adsorption of chitosan (CH) (polycation) and cellulose nanocrystals (CNC) produced via ultrasonic treatment. Four bilayers (on each side) of chitosan and cellulose nanocrystals caused 29 and 26% improvement in barrier properties in case of films and bottles, respectively. According to the results the LbL process with CH and CNC offered a transparent “green” barrier coating on PLA substrates.

Surfactant-triggered disassembly of electrostatic complexes probed at optical and quartz crystal microbalance length scales

A critical advantage of electrostatic assemblies over covalent and crystalline bound materials is that associated structures can be disassembled into their original constituents. Nanoscale devices designed for the controlled release of functional molecules already exploit this property. To bring some insight into the mechanisms of disassembly and release, we study the disruption of molecular electrostatics-based interactions via competitive binding with ionic surfactants. To this aim, free-standing micrometer-size wires were synthesized using oppositely charged poly(diallyldimethylammonium chloride) and poly(acrylic acid) coated iron oxide nanoparticles. The disassembly is induced by the addition of sodium dodecyl sulfates that complex preferentially the positive polymers. The process is investigated at two different length scales: the length scale of the particles (10 nm) through the quartz crystal microbalance technique and that of the wires (>1 μm) via optical microscopy. Upon surfactant addition, the disassembly is initiated at the surface of the wires by the release of nanoparticles and by the swelling of the structure. In a second step, erosion involving larger pieces takes over and culminates in the complete dissolution of the wires, confirming the hypothesis of a surface-type swelling and erosion process.

Coding for hydrogel organization through signal guided self-assembly

Complex structured soft matter may have important applications in the field of tissue engineering and biomedicine. However, the discovery of facile methods to exquisitely manipulate the structure of soft matter remains a challenge. In this report, a multilayer hydrogel is fabricated from the stimuli-responsive aminopolysaccharide chitosan by using spatially localized and temporally controlled sequences of electrical signals. By programming the imposed cathodic input signals, chitosan hydrogels with varying layer number and thickness can be fabricated. The inputs of electrical signals induce the formation of hydrogel layers while short interruptions create interfaces between each layer. The thickness of each layer is controlled by the charge transfer (Q = ∫idt) during the individual deposition step and the number of multilayers is controlled by the number of interruptions. Scanning electron micrographs (SEMs) reveal organized fibrous structures within each layer that are demarcated by compact orthogonal interlayer structures. This work demonstrates for the first time that an imposed sequence of electrical inputs can trigger the self-assembly of multilayered hydrogels and thus suggests the broader potential for creating an electrical "code" to generate complex structures in soft matter.

25th anniversary article: what can be done with the Langmuir-Blodgett method? Recent developments and its critical role in materials science

The Langmuir-Blodgett (LB) technique is known as an elegant method for fabrication of well-defined layered structures with molecular level precision. Since its discovery the LB method has made an indispensable contribution to surface science, physical chemistry, materials chemistry and nanotechnology. However, recent trends in research might suggest the decline of the LB method as alternate methods for film fabrication such as layer-by-layer (LbL) assembly have emerged. Is LB film technology obsolete? This review is presented in order to challenge this preposterous question. In this review, we summarize recent research on LB and related methods including (i) advanced design for LB films, (ii) LB film as a medium for supramolecular chemistry, (iii) LB technique for nanofabrication and (iv) LB involving advanced nanomaterials. Finally, a comparison between LB and LbL techniques is made. The latter reveals the crucial role played by LB techniques in basic surface science, current advanced material sciences and nanotechnologies.

Electric field induced morphological transitions in polyelectrolyte multilayers

In this work, the morphological transitions in weak polyelectrolyte (PE) multilayers (PEMs) assembled from linear poly(ethylene imine) (LPEI) and poly(acrylic acid) (PAA) upon application of an electric field were studied. Exposure to an electric field results in the creation of a porous structure, which can be ascribed to local changes in pH from the hydrolysis of water and subsequent structural rearrangements of the weak PE constituents. Depending on the duration of application of the field, the porous transition gradually develops into a range of structures and pore sizes. It was discovered that the morphological transition of the LbL films starts at the multilayer-electrode interface and propagates through the film. First an asymmetrical structure forms, consisting of microscaled pores near the electrode and nanoscaled pores near the surface in contact with the electrolyte solution. At longer application of the field the porous structures become microscaled throughout. The results revealed in this study not only demonstrate experimental feasibility for controlling variation in pore size and porosity of multilayer films but also deepens the understanding of the mechanism of the porous transition. In addition, electrical potential is used to release small molecules from the PEMs.

Oligonucleotides and polynucleotides condensation onto liposome surface: effects of the base and of the nucleotide length

The association behavior of different nucleic acids with cationic liposomes has been monitored, in order to find out how the polymer length, the type of base and the charge density affect the lipoplex formation. In particular the associative features displayed by the homopolymer 20-mer of adenine, Oligo (dA), of timine, Oligo (dT), and of guanine, Oligo (dG), were compared to understand the role of the base. The effects of the nucleic acid length and of the charge density were evaluated taking account of the association of the polyadenylic acid and of the DNA onto the liposomes. The results show that the homopolymer Oligo (dG) is able to interact with the cationic liposomes to the same extent as DNA, in spite of the fact that Oligo (dG) is a short polymer made of 20 residues and DNA is a longer and dual strand polymer having a higher charge density.

Paradigm shift from self-assembly to commanded assembly of functional materials: recent examples in porphyrin/fullerene supramolecular systems

Current nanotechnology based on top-down nanofabrication may encounter a variety of drawbacks in the near future so that development of alternative methods, including the so-called bottom-up approach, has attracted considerable attention. However, the bottom-up strategy, which often relies on spontaneous self-assembly, might be inefficient in the development of the requisite functional materials and systems. Therefore, assembly processes controlled by external stimuli might be a plausible strategy for the development of bottom-up nanotechnology. In this review, we demonstrate a paradigm shift from self-assembly to commanded assembly by describing several examples of assemblies of typical functional molecules, i.e. porphyrins and fullerenes. In the first section, we describe recent progress in the design and study of self-assembled and co-assembled supramolecular architectures of porphyrins and fullerenes. Then, we show examples of assembly induced by external stimuli. We emphasize the paradigm shift from self-assembly to commanded assembly by describing the recently developed electrochemical-coupling layer-by-layer (ECC-LbL) methodology.