Organic nanoparticles from microemulsions: Formation and applications

Effect of Polymer and Cell Membrane Coatings on Theranostic Applications of Nanoparticles: A Review

The recent decade has witnessed a remarkable surge in the field of nanoparticles, from their synthesis, characterization, and functionalization to diverse applications. At the nanoscale, these particles exhibit distinct physicochemical properties compared to their bulk counterparts, enabling a multitude of applications spanning energy, catalysis, environmental remediation, biomedicine, and beyond. This review focuses on specific nanoparticle categories, including magnetic, gold, silver, and quantum dots (QDs), as well as hybrid variants, specifically tailored for biomedical applications. A comprehensive review and comparison of prevalent chemical, physical, and biological synthesis methods are presented. To enhance biocompatibility and colloidal stability, and facilitate surface modification and cargo/agent loading, nanoparticle surfaces are coated with different synthetic polymers and very recently, cell membrane coatings. The utilization of polymer- or cell membrane-coated nanoparticles opens a wide variety of biomedical applications such as magnetic resonance imaging (MRI), hyperthermia, photothermia, sample enrichment, bioassays, drug delivery, etc. With this review, the goal is to provide a comprehensive toolbox of insights into polymer or cell membrane-coated nanoparticles and their biomedical applications, while also addressing the challenges involved in translating such nanoparticles from laboratory benchtops to in vitro and in vivo applications. Furthermore, perspectives on future trends and developments in this rapidly evolving domain are provided.

Microemulsions of Nonionic Surfactant with Water and Various Homologous Esters: Preparation, Phase Transitions, Physical Property Measurements, and Application for Extraction of Tricyclic Antidepressant Drugs from Aqueous Media

Microemulsions are nanocolloidal systems composed of water, an oil, and a surfactant, sometimes with an additional co-surfactant, which have found a wide range of practical applications, including the extractive removal of contaminants from polluted water. In this study, microemulsion systems, including a nonionic surfactant (Brij 30), water, and esters selected from two homologous series of C1-C6 alkyl acetates and ethyl C1-C4 carboxylates, respectively, were prepared by the surfactant titration method. Phase transitions leading to the formation of Winsor II and Winsor IV microemulsions were observed and phase diagrams were constructed. The dependences of phase transitions on the salinity and pH and the addition of isopropanol as a co-surfactant were also investigated. Some physical properties, namely density, refractive index, electrical conductivity, dynamic viscosity, and particle size, were measured for a selection of Winsor IV microemulsions, providing further insight into some other phase transitions occurring in the monophasic domains of phase diagrams. Finally, Winsor II microemulsions were tested as extraction solvents for the removal of four tricyclic antidepressant drugs from aqueous media. Propyl acetate/Brij 30/H2O microemulsions provided the best extraction yields (>90%), the highest Nernst distribution coefficients (~40-88), and a large volumetric ratio of almost 3 between the recovered purified water and the resulting microemulsion extract. Increasing the ionic strength (salinity) or the pH of the aqueous antidepressant solutions led to an improvement in extraction efficiencies, approaching 100%. These results could be extrapolated to other classes of pharmaceutical contaminants and suggest ester- and nonionic surfactant-based microemulsions are a promising tool for environmental remediation.

An emerging era in manufacturing of drug delivery systems: Nanofabrication techniques

Nanotechnology has the capability of making significant contributions to healthcare. Nanofabrication of multifunctional nano- or micro-character systems is becoming incredibly influential in various sectors like electronics, photonics, energy, and biomedical gadgets worldwide. The invention of such items led to the merger of moderate cost and excellent quality nano or micro-characters into 3D structures. Nanofabrication techniques have many benefits as the primary technology for manipulating cellular surroundings to research signaling processes. The inherent nanoscale mechanisms of cyto-reactions include the existence and death of cells, stem cell segmentation, multiplication, cellular relocation, etc. Nanofabrication is essential in developing various nano-formulations like solid lipid nanoparticles, nanostructured lipid carriers, liposomes, niosomes, nanoemulsions, microemulsions etc. Despite the initial development cost in designing the nanofabrication-based products, it has also reduced the total cost of the healthcare system by considering the added benefits compared to the other standard formulations. Thus, the current review mainly focuses on nanofabrication techniques, advantages, disadvantages, applications in developing various nanocarrier systems, challenges and future perspectives.

Metal-Organic Framework-Based Colloidal Particle Synthesis, Assembly, and Application

Metal-organic frameworks (MOFs) assembled from metal nodes and organic ligands have received significant attention over the past two decades for their fascinating porous properties and broad applications. Colloidal MOFs (CMOFs) not only inherit the intrinsic properties of MOFs, but can also serve as building blocks for self-assembly to make functional materials. Compared to bulk MOFs, the colloidal size of CMOFs facilitates further manipulation of CMOF particles in a single or collective state in a liquid medium. The resulting crystalline order obtained by self-assembly in position and orientation can effectively improve performance. In this review, we summarize the latest developments of CMOFs in synthesis strategies, self-assembly methods, and related applications. Finally, we discuss future challenges and opportunities of CMOFs in synthesis and assembly, by which we hope that CMOFs can be further developed into new areas for a wider range of applications.

Formulation and characterisation of Azadirachta indica nanobiopesticides for ecofriendly control of wheat pest Tribolium castaneum and Rhyzopertha dominica

This study aimed to formulate the green, sustainable, and ecofriendly nanobiopesticides of Azadirachta indica with enhanced pest control efficacy. Nanoprecipitation method was used for the development of nanobiopesticides. Optimisation was done by response surface methodology. Nanoformulations were characterised by zetasizer, scanning electron microscopy, energy dispersive x-ray spectroscopy, atomic force microscopy, and Fourier transform infrared spectroscopy. Pesticidal potential of nanosuspensions was evaluated by insecticide impregnated filter paper method. Optimised nanobiopesticide showed an average particle size of 275.8 ± 0.95 nm, polydispersity index (PDI) 0.351 ± 0.002, and zeta potential of -33 ± 0.90 mV. Nanobiopesticides exhibited significantly higher mortality rates of 86.81 ± 3.04 and 84.97 ± 2.83% against Tribolium castaneum and Ryzopertha dominica, respectively, as compared to their crude extract. Minor change in particle size from 275.8 ± 0.95 to 298.8 ± 1.00 nm and PDI from 0.351 ± 0.002 to 0.445 ± 0.02 were observed after 3 months of storage at 4 °C. Pesticidal efficacy of A. indica was significantly enhanced by the formulation of its nanobiopesticides.

Organic Nanoplatforms for Iodinated Contrast Media in CT Imaging

X-ray computed tomography (CT) imaging can produce three-dimensional and high-resolution anatomical images without invasion, which is extremely useful for disease diagnosis in the clinic. However, its applications are still severely limited by the intrinsic drawbacks of contrast media (mainly iodinated water-soluble molecules), such as rapid clearance, serious toxicity, inefficient targetability and poor sensitivity. Due to their high biocompatibility, flexibility in preparation and modification and simplicity for drug loading, organic nanoparticles (NPs), including liposomes, nanoemulsions, micelles, polymersomes, dendrimers, polymer conjugates and polymeric particles, have demonstrated tremendous potential for use in the efficient delivery of iodinated contrast media (ICMs). Herein, we comprehensively summarized the strategies and applications of organic NPs, especially polymer-based NPs, for the delivery of ICMs in CT imaging. We mainly focused on the use of polymeric nanoplatforms to prolong circulation time, reduce toxicity and enhance the targetability of ICMs. The emergence of some new technologies, such as theragnostic NPs and multimodal imaging and their clinical translations, are also discussed.

Mechanistic Investigations of Growth of Anisotropic Nanostructures in Reverse Micelles

Tailoring the characteristics of anisotropic nanostructures like size, morphology, aspect ratio, and size dispersity is of extreme importance due to the unique and tunable properties including catalytic, optical, photocatalytic, magnetic, photochemical, electrochemical, photoelectrochemical, and several other physical properties. The reverse microemulsion (RM) method offers a useful soft-template and low-temperature procedure that, by variation of experimental conditions and nature of reagents, has proved to be extremely versatile in synthesis of nanostructures with tailored properties. Although many reports of synthesis of nanostructures by the RM method exist in the literature, most of the research studies carried out still follow the "hit and trial" method where the synthesis conditions, reagents, and other factors are varied and the resulting characteristics of the obtained nanostructures are justified on the basis of existing physical chemistry principles. Mechanistic investigations are scarce to generate a set of empirical rules that would aid in preplanning the RM-based synthesis of nanostructures with desired characteristics as well as make the process viable on an industrial scale. A consolidation of such research data available in the literature is essential for providing future directions in the field. In this perspective, we analyze the literature reports that have investigated the mechanistic aspects of growth of anisotropic nanostructures using the RM method and distil the essence of the present understanding at the nanoscale timescale using techniques like FCS and ultrafast spectroscopy in addition to routine techniques like DLS, fluorescence, TEM, etc.

Development of abamectin-loaded nanoemulsion and its insecticidal activity and cytotoxicity

BACKGROUND

Owing to the advantages of high-efficiency, environmental protection and safety, nanoemulsions have become a highly popular water-insoluble pesticide delivery system in recent years.

RESULTS

In this study, abamectin-loaded nanoemulsion with remarkable physical stability and application performance was obtained by selecting the type and concentration of surfactant and the emulsification method. The optimal formula was 2% abamectin and 5% castor oil polyoxyethylene (EL-40) dissolved in 7.5% hydrocarbon solvent (S-200) made up to 100% with deionized water, which conformed to the quality indicators from the Food and Agriculture Organization (FAO) standards. Droplets on cabbage leaves showed a small dynamic contact angle, which ensured that the resulting nanoemulsion exhibited excellent wettability and diffusivity. Compared with emulsifiable concentrates (EC) and microemulsions (ME), the abamectin-loaded nanoemulsion had the lowest LC₅₀ (0.0686 mg L^-1 ) to third-instar larva of Plutella xylostella, causing the larval body to blacken and shrivel, which improved insecticidal activity. In addition, the abamectin-loaded nanoemulsion had low cytotoxicity. The viability of dendritic cells with added nanoemulsion reached 100% after 2 h, whereas that of cells with EC and ME was lower. After 24 h, the cell viability of dendritic cells with added ME was 0.

CONCLUSION

This research facilitated the design and fabrication of nanoemulsions for water-insoluble pesticide to enhance insecticidal activity, lower cytotoxicity and reduce environmental pollution. © 2020 Society of Chemical Industry.

Biocompatible sulfated valproic acid-coupled polysaccharide-based nanocarriers with HDAC inhibitory activity

The development of bio-based nanoparticles (NPs) as drug containers is of increasing interest to circumvent several obstacles in drug therapy such as rapid drug metabolization, short serum half-life, and unspecific side effects. The histone deacetylase inhibitor valproic acid (VPA) is known for its anti-inflammatory as well as for its anti-cancer activity. Here, recently developed VPA-loaded NPs based on cellulose- and dextran VPA esters were modified with sulfuric acid half ester moieties to improve intracellular drug release. The NPs show rapid cellular uptake, are non-toxic in vitro and in vivo, and able to induce histone H3 hyperacetylation. Thus, they represent a potent drug delivery system for the application in a variety of treatment settings, such as inflammation, sepsis and defined cancer types. In addition, the flexible NP-system offers a broad range of further options for modification, e.g. for targeting strategies and multi-drug approaches.

Static and dynamic properties of decane/water microemulsions stabilized by cetylpyridinium chloride cationic surfactant and octanol cosurfactant

Molecular dynamics simulation (MD) is used to study the static and dynamic properties of positively charged decane/water microemulsions, for various volume fractions Φ (2.8%, 6.98%, 14%, and 26.5%). An effective hybrid potential combining three potentials, namely the hard-sphere repulsive potential, the van der Waals attractive potential, and the Yukawa repulsive potential, is used to describe the microemulsion interactions. The microemulsion shape is determined using the renormalized spectra in Porod representation. The appropriate potential parameters are tested using the Ornstein–Zernike integral equation approach with the Hypernetted Chain (HNC) closure relation by a comparison between the structure factor calculated from HNC and that obtained from Small Angle Neutron Scattering experiments (SANS). Thus, the micro arrangements of microemulsions have been analyzed using the pair correlation function g(r) and the structure factor S(q) obtained from HNC, SANS, and MD simulation using these parameters. The microemulsion dynamic properties were discussed using the mean-square displacement (MSD) and the diffusion coefficient D_c calculated from MD simulations.

We report a molecular dynamics simulation using a proven effective interaction potential to study the physical properties of decane/water microemulsions.

Microemulsion Microstructure(s): A Tutorial Review

Microemulsions are thermodynamically stable, transparent, isotropic single-phase mixtures of two immiscible liquids stabilized by surfactants (and possibly other compounds). The assortment of very different microstructures behind such a univocal macroscopic definition is presented together with the experimental approaches to their determination. This tutorial review includes a necessary overview of the microemulsion phase behavior including the effect of temperature and salinity and of the features of living polymerlike micelles and living networks. Once these key learning points have been acquired, the different theoretical models proposed to rationalize the microemulsion microstructures are reviewed. The focus is on the use of these models as a rationale for the formulation of microemulsions with suitable features. Finally, current achievements and challenges of the use of microemulsions are reviewed.

Formation of Antihyperlipidemic Nano-Ezetimibe from Volatile Microemulsion Template for Enhanced Dissolution Profile

Nanostructures play an important role in targeting sparingly water-soluble drugs to specific sites. Because of the structural flexibility and stability, the use of template microemulsions (μEs) can produce functional nanopharmaceuticals of different sizes, shapes, and chemical properties. In this article, we report a new volatile oil-in-water (o/w) μE formulation comprising ethyl acetate/ethanol/brij-35/water to obtain the highly water-dispersible nanoparticles of an antihyperlipidemic agent, ezetimibe (EZM-NPs), to enhance its dissolution profile. A pseudoternary phase diagram was delineated in a specified brij-35/ethanol ratio (1:1) to describe the transparent, optically isotropic domain of the as-formulated μE. The water-dilutable μE formulation, comprising an optimum composition of ethyl acetate (18.0%), ethanol (25.0%), brij-35 (25.0%), and water (32.0%), showed a good dissolvability of EZM around 4.8 wt % at pH 5.2. Electron micrographs showed a fine monomodal collection of EZM-loaded μE droplets (∼45 nm) that did not coalesce even after lyophilization, forming small spherical EZM-NPs (∼60 nm). However, the maturity of nanodrug droplets observed through dynamic light scattering suggests the affinity of EZM to the nonpolar microenvironment, which was further supported through peak-to-peak correlation of infrared analysis and fluorescence measurements. Moreover, the release profile of the as-obtained EZM-nanopowder increased significantly >98% in 30 min, which indicates that a reduced drug concentration will be needed for capsules or tablets in the future and can be simply incorporated into the multidosage formulation of EZM.

Fab on a Package: LTCC Microfluidic Devices Applied to Chemical Process Miniaturization

Microfluidics has brought diverse advantages to chemical processes, allowing higher control of reactions and economy of reagents and energy. Low temperature co-fired ceramics (LTCC) have additional advantages as material for fabrication of microfluidic devices, such as high compatibility with chemical reagents with typical average surface roughness of 0.3154 μm, easy scaling, and microfabrication. The conjugation of LTCC technology with microfluidics allows the development of micrometric-sized channels and reactors exploiting the advantages of fast and controlled mixing and heat transfer processes, essential for the synthesis and surface functionalization of nanoparticles. Since the chemical process area is evolving toward miniaturization and continuous flow processing, we verify that microfluidic devices based on LTCC technology have a relevant role in implementing several chemical processes. The present work reviews various LTCC microfluidic devices, developed in our laboratory, applied to chemical process miniaturization, with different geometries to implement processes such as ionic gelation, emulsification, nanoprecipitation, solvent extraction, nanoparticle synthesis and functionalization, and emulsion-diffusion/solvent extraction process. All fabricated microfluidics structures can operate in a flow range of mL/min, indicating that LTCC technology provides a means to enhance micro- and nanoparticle production yield.

Biological nanopesticides: a greener approach towards the mosquito vector control

Mosquitoes, being a vector for some potentially dreadful diseases, pose a considerable threat to people all around the world. The control over the growth and propagation of mosquitoes comprises conventional pesticides, insect growth regulators and other microbial control agents. However, the usage of these common chemicals and conventional pesticides eventually has a negative impact on human health as well as the environment, which therefore becomes a major concern. The lacuna allows nanotechnology to come into action and exploit nanopesticides. Nanopesticides are majorly divided into two categories-synthetic and biological. Several nanoformulations serve as a promising nanopesticide viz. nanoparticles, e.g. biologically synthesised nanoparticles through plant extracts, nanoemulsions prepared using the essential oils like neem oil and citronella oil and nanoemulsion of conventional pesticides like pyrethroids. These green approaches of synthesising nanopesticides make use of non-toxic and biologically derived compounds and hence are eco-friendly with a better target specificity. Even though there are numerous evidences to show the effectiveness of these nanopesticides, very few efforts have been made to study the possible non-target effects on other organisms prevalent in the aquatic ecosystem. This study focuses on the role of these nanopesticides towards the vector control and its eco-safe property against the other non-target species.

Well-defined, persistent, chiral phthalocyanine nanoclusters via G-quadruplex assembly

Octameric near-IR dye nanoclusters are produced by complexation of potassium cations with a phthalocyanine-guanosine conjugate. The combination of hydrogen-bonding, K(+) coordination, π-π stacking and steric interactions between the chiral side groups is responsible for defining a specific helical chromophore arrangement in the clusters, which display high stability and maintain their supramolecular identity onto substrates.

Tunable synthetic control of soft polymeric nanoparticle morphology

With a growing variety of nanoparticles available, research probing the influence of particle deformability, morphology, and topology on the behavior of all polymer nanocomposites is also increasing. In particular, the behavior of soft polymeric nanoparticles in polymer nanocomposites has displayed unique behavior, but their precise performance depends intimately on the internal structure and morphology of the nanoparticle. With the goal of providing guidelines to control the structure and morphology of soft polymeric nanoparticles, we have examined monomer starved semi-batch nano-emulsion polymerizations that form organic, soft nanoparticles, to correlate the precise structure of the nanoparticle to the rate of monomer addition and crosslinking density. The synthesis method produces 5-20 nm radii polystyrene nanoparticles with tunable morphologies. We report small angle neutron scattering (SANS) results that correlate synthetic conditions to the structural characteristics of soft polystyrene nanoparticles. These results show that the measured molecular weight of the nanoparticles is controlled by the monomer addition rate, the total nanoparticle radius is controlled by the excess surfactant concentration, and the crosslinking density has a direct effect on the topology of each nanoparticle. These studies thus provide pathways to control these 3 structural characteristics of the nanoparticle. This research, therefore provides a conduit to thoroughly investigate the effect of structural features of soft nanoparticles on their individual properties and those of their polymer nanocomposites.

Stability of nano-sized permethrin in its colloidal state and its effect on the physiological and biochemical profile of Culex tritaeniorhynchus larvae

The occurrence of pesticidal pollution in the environment and the resistance in the mosquito species makes an urge for the safer and an effective pesticide. Permethrin, a poorly water-soluble pyrethroid pesticide, was formulated into a hydrodispersible nanopowder through rapid solvent evaporation of pesticide-loaded oil in water microemulsion. Stability studies confirmed that the nanopermethrin dispersion was stable in paddy field water for 5 days with the mean particle sizes of 175.3 ± 0.75 nm and zeta potential of -30.6 ± 0.62 mV. The instability rate of the nanopermethrin particles was greater in alkaline (pH 10) medium when compared with the neutral (pH 7) and acidic (pH 4) dispersion medium. The colloidal dispersion at 45°C was found to be less stable compared with the dispersions at 25 and 5°C. The 12- and 24-h lethal indices (LC50) for nanopermethrin were found to be 0.057 and 0.014 mg l-1, respectively. These results were corroborative with the severity of damages observed in the mosquito larvae manifested in epithelial cells and the evacuation of the midgut contents. Further, the results were substantiated by the decrease in cellular biomolecules and biomarker enzyme activity in nanopermethrin treated larvae when compared to bulk and control treatment.

Self-assembly, phase behaviour and structural behaviour as observed by scattering for classical and non-classical microemulsions

In this review, we discuss the conditions for forming microemulsions, systems which are thermodynamically stable mixtures of oil and water made stable by the presence of an interfacial film containing surface active molecules. There are several types of microemulsions, depending largely on the stiffness of the amphiphilic monolayer that separates the oily and the aqueous micro-domain. We first discuss and compare the phase behaviour of these different types, starting from the classical microemulsion made from a flexible surfactant film but then also moving on to less classical situations: this occurs when the interfacial film is stiff or when microemulsions are formed in the absence of a classical surfactant. In the second part, we relate these different microemulsion types to the structural features as can be determined via different methodologies by small angle scattering (SAS). Using absolute scaling, general theorems as well as fitting under constraints or to pre-supposed shapes in real space or correlation functions in reciprocal space allows to classify all microemulsions into classical flexible, rigid or ultra-flexible microemulsions with either globular, connected cylinder of locally flat interfaces, with the corresponding conductivity and phase stability properties.

Stability assessment of hydro dispersive nanometric permethrin and its biosafety study towards the beneficial bacterial isolate from paddy rhizome

Nanopesticides such as nanopermethrin can serve as an alternative to conventional pesticides causing eco-toxicity. The nanoformulation of this pyrethroid pesticide was carried out by solvent evaporation of pesticide-loaded microemulsion. The Z average for the nanopermethrin dispersion in paddy field water was found to be 169.2 ± 0.75 nm with a polydispersity index of 0.371 that exhibits uniform dispersion. Further, the nanopermethrin (NP) dispersion exhibited an effective stability in the paddy field water for a duration of 48 h with a Z average of 177.3 ± 1.2 nm and a zeta potential of -30.7 ± 0.9 mV. The LC₅₀ of the nanopermethrin against Culex tritaeniorhynchus in the field condition was found to be 0.051 μg/mL. In addition to the stability assessment, the biosafety of the nanopermethrin was commenced on the beneficial bacterial isolate Enterobacter ludwigii (VITSPR1) considered as plant growth-promoting rhizobacteria. The toxic effect of nanopesticide was compared to its bulk counterpart, i.e. bulk permethrin (BP) at a concentration of 100 µg/mL, and the nanopesticide was found to be potentially safe. The results of biomarker enzymatic assays (lipid peroxidase, glutathione reductase, lactate dehydrogenase) displayed insignificant (p < 0.05) toxicity of NP towards the bacterial cells compared to BP. The live-dead cell staining and SEM analysis illustrated negligible toxicity of NP towards the bacteria. The non-toxic behaviour of the NP towards the non-target species was studied which displayed the eco-safe property of NP.

Synthesis of well-defined core–shell nanoparticles based on bifunctional poly(2-oxazoline) macromonomer surfactants and a microemulsion polymerization process

Surface-functional nanoparticles have been fabricated by utilizing bifunctional poly(2-oxazoline) macromonomers as surfactants in a microemulsion process.

Transport properties of microemulsions with ionic liquid apolar domains as a function of ionic liquid content

The conductivity, dynamic viscosity and diffusion coefficient of aqueous ionic liquid microemulsions were measured as a function of ionic liquid content. ​The conclusions from transport properties were supported by UV-Vis as well as FTIR measurements.

Highly Stable Tetra-Phenolato Titanium(IV) Agent Formulated into Nanoparticles Demonstrates Anti-Tumoral Activity and Selectivity

Titanium(IV) complexes exhibit high potential as anti-tumor agents, particularly due to their low intrinsic toxicity and cytotoxicity toward cisplatin resistant cells. Nevertheless, Ti(IV) complexes generally undergo rapid hydrolysis that previously hampered their utilization as anticancer drugs. We recently overcame this difficulty by developing a highly stable Ti(IV) complex that is based on tetra-phenolato, hexadentate ligand, formulated into organic nanoparticles. Herein we investigated the activity of this complex in vitro and in vivo. Although inactive when tested directly due to poor solubility, when formulated, this complex displayed (a) high cytotoxicity toward cisplatin resistant human ovarian cells, A2780-cp, with resistance factor of 1.1; (b) additive behavior in combination with cisplatin toward ovarian and colon cancer cells; (c) selectivity toward cancer cells as implied by its mild activity toward non-cancerous, fibroblast lung cells, MRC-5; (d) high stability and durability as manifested by the ability to maintain cytotoxicity, even following one week of incubation in 100% aquatic medium solution; and (e) in vivo efficacy toward solid tumors of human colon cancer cells, HT-29, in nude mice without any clinical signs of toxicity. These features support the formulated phenolato Ti(IV) complex being an effective and selective anti-tumoral agent.

A general protocol for π-conjugated molecule-based micro/nanospheres: artificial supramolecular antenna in terms of heterogeneous photocatalysis

An oil-in-water-mediated surfactant-assisted assembly is initiated as a general method for π-conjugated molecules-based micro/nanospheres, supramolecular antenna with regard to heterogeneous photocatalysis has been realized using porphyrin spheres.

Anti-proliferative activity of nano-formulated phenolato titanium(IV) complexes against cancer cells

Nanoparticles of titanium(IV) complexes of phenolato ligands were formed and evaluated for cytotoxicity toward human HT-29 colon cancer, murine T-25 lymphoma, and murine HU-2 multidrug-resistant (MDR) cells. The nano-formulation, besides increasing the complexes' shelf lives, is particularly efficient in overcoming limitations in solubility and cell-penetration, thus enhancing biological accessibility; large complexes that were inactive when measured in a non-formulated form showed marked activity when nano-formulated. For active and accessible small complexes, the effect of the formulation was negligible. Most complexes showed similar activity toward MDR cells and their drug-sensitive analogues, further increasing their therapeutic potential. An exception is a particularly hydrophobic complex, which is presumably more accessible to interaction with the membrane ABCB1 (MDR1) transporter active in the multidrug resistance of HU-2 cells. The most efficient compound is a mononuclear complex of a single hexadentate ligand, combining particularly high activity and hydrolytic stability with accessibility aided by the nano-formulation.

Percolation Threshold of AOT Microemulsions with n-Alkyl Acids as Additives Prediction by Means of Artificial Neural Networks

Different artificial neural networks architectures have been assayed to predict percolation temperature of AOT/iC8/H2O microemulsions in the presence of n-alkyl acids with a chain length between 0 and 24 carbons, using a multilayer perceptron with five easy-acquired entrance variables (number of carbons, log P, length of the hydrocarbon chain, pKa and acid concentration). The evaluation of the neural networks was carried out by means of RMSE and IDP, resulting that the architecture with better results consists in five input neurons, two middle layers (with five and ten neuron respectively) and one output neuron. Results prove that Artificial Neural Networks are a useful tool elaborating models to predict percolation temperature of microemulsion systems in the presence of additives.