Plant proteins and their colloidal state

Next-Generation Plant-Based Foods: Challenges and Opportunities

Owing to environmental, ethical, health, and safety concerns, there has been considerable interest in replacing traditional animal-sourced foods like meat, seafood, egg, and dairy products with next-generation plant-based analogs that accurately mimic their properties. Numerous plant-based foods have already been successfully introduced to the market, but there are still several challenges that must be overcome before they are adopted by more consumers. In this article, we review the current status of the science behind the development of next-generation plant-based foods and highlight areas where further research is needed to improve their quality, increase their variety, and reduce their cost, including improving ingredient performance, developing innovative processing methods, establishing structure-function relationships, and improving nutritional profiles.

Role of the pea protein aggregation state on their interfacial properties

HYPOTHESIS

Plant protein ingredients from similar sources can vary in functionality not only because of compositional differences, but also because of differences in their structure depending on their processing history. It is essential to understand these distinctions to develop novel food emulsion using plant proteins. It is hypothesized that differing interfacial properties can be attributed to their structures, aggregation, and colloidal states.

EXPERIMENTS

The adsorption behavior of a commercial protein isolate, homogenized or non-homogenized, was compared to a mildly extracted isolate to evaluate the effect of aggregation state and structural differences. After characterization of the particle size and protein composition, the interfacial properties were compared.

FINDINGS

Atomic force microscopy provided evidence of interfaces packed with protein oligomers regardless of the treatment. Differences in adsorption kinetics and interfacial shear rheology depending on oil polarity suggested different interfacial structures. A polydisperse mixture of protein oligomers resulted in increased rearrangements and protein-protein interactions at the interface. Homogenization of commercial proteins resulted in a lower interfacial tension and less elastic interfaces compared to those of native proteins due to the presence of larger aggregates. This study highlights how the interfacial properties can be related to the protein aggregation state resulting from differences in processing history.

Simple and complex coacervation in systems involving plant proteins

Plant-based foods are gaining popularity as alternatives to meat and dairy products due to sustainability and health concerns. As a consequence, there is a renewed interest in the phase behaviour of plant proteins and of mixtures of plant proteins and polysaccharides, in particular in the cases where coacervation is found to occur, i.e., liquid-liquid phase separation (LLPS) into two phases, one of which is rich in biopolymers and one of which is poor in biopolymer. Here we review recent research into both simple and complex coacervation in systems involving plant proteins, and their applications in food- as well as other technologies, such as microencapsulation, microgel production, adhesives, biopolymer films, and more.

Plant protein solubility: A challenge or insurmountable obstacle

Currently, there is an increasing focus on comprehending the solubility of plant-based proteins, driven by the rising demand for animal-free food formulations. The solubility of proteins plays a crucial role in impacting other functional properties of proteins and food processing. Consequently, understanding protein solubility in a deeper sense may allow a better usage of plant proteins. Herein, we discussed the definition of protein solubility from both thermodynamic and colloidal perspectives. A range of factors affecting solubility of plant proteins are generalized, including intrinsic factors (amino acids composition, hydrophobicity), and extrinsic factors (pH, ionic strength, extraction and drying methods). Current methods to enhance solubility are outlined, including microwave, high intensity ultrasound, hydrostatic pressure, glycation, pH-shifting, enzymatic hydrolysis, enzymatic cross-linking, complexation and modulation of amino acids. We base the discussion on diverse modified methods of nitrogen solubility index available to determine and analyze protein solubility followed by addressing how other indigenous components affect the solubility of plant proteins. Some nonproteinaceous constituents in proteins such as carbohydrates and polyphenols may exert positive or negative impact on protein solubility. Appropriate protein extraction and modification methods that meet consumer and manufacturers requirements concerning nutritious and eco-friendly foods with lower cost should be investigated and further explored.

Comparison of the specific mechanical energy, specific thermal energy, and functional properties of cold and hot extruded pea protein isolate

Pea protein is a popular source of plant-based protein, though its application in meat and dairy analog products is still lacking. This is particularly true in the development of products with fatty and creamy textures. Cold denaturation may be a way to induce these types of textures in food since this is a universal phenomenon in protein that occurs due to a weakening of hydrophobic interactions at cold temperatures. This work utilizes a single screw extruder to systematically study the impacts of moisture content (50-65 %) and pH (2,4.5,8) on the outlet temperatures, specific mechanical energy, specific thermal energy, and texture of cold-extruded pea protein. It was found that at pH 2 and moistures of 60 % and greater, the temperature of the product exiting the extruder is <5.5 °C, and also produced 13.7 %-36.5 % more specific thermal energy, indicating the occurrence of cold denaturation in these products. Based on these findings, a comparison of hot and cold extrusion was conducted as a function of pH and oil content. It was found that cold extrusion imparts 43.0 %-56.2 % more mechanical energy into the protein than hot extrusion, and the cold extruded protein had higher values of Young's modulus and breaking stress. The protein extruded at low temperatures was also able to bind 32.93 % more oil than hot extruded proteins when extruded with 10 % added oil, which may aid in the formation of protein-based fat memetics for the food industry.

Importance of binary and ternary complex formation on the functional and nutritional properties of legume proteins in presence of phytic acid and calcium

Nowadays, legumes are considered as a good source of plant-based proteins to replace animal ones. They are more favorable regarding environmental aspects and health benefits, therefore many people consider moving toward a greener diet. Interestingly, recent consumer trends are promoting pea and faba bean as alternatives to soybean. Both are rich in protein and a good source of essential nutrients and minerals (calcium). However, these advantages can be partially impaired due to their high phytic acid content. This natural polyphosphate is a major antinutrient in plant-based foods, as it can bind minerals (particularly calcium) and proteins, thereby reducing their digestibility and subsequent bioavailability. Indeed, complexes formed are insoluble and limiting the absorption of nutrients, thus lowering the nutritional value of pulses. To understand and overcome these issues, the present review will refine specific mechanisms involved in assemblies between these three essential compounds in legumes as soluble/insoluble binary or ternary complexes. Molecular interactions are influenced by the environmental medium including pH, ionic strength and molar concentrations modulating the stability of these complexes during protein extraction. Protein/phytic acid/calcium complexes stability is of high relevance for food processing affecting not only structure but also functional and nutritional properties of proteins in legume-based foods.

Effects of processing technologies on the antioxidant properties of common bean (Phaseolus vulgaris L.) and lentil (Lens culinaris) proteins and their hydrolysates

The effects of ultrasound (280 W, 5 min), heat treatment (75 °C and 90 °C for 10 min) and microfluidization (125 MPa, 4 cycles) as pre or post treatments and their combination with enzymatic hydrolysis on the antioxidant properties of common bean and lentil protein hydrolysates were investigated. In general, hydrolysis resulted in increases of antioxidant activity, both in the presence and absence of processing technologies. The increases reached maximum values of 158% (ABTS), 105% (DPPH), 279% (FRAP) and 107% (TAC) for the bean protein hydrolysates submitted to post-treatment with ultrasound (ABTS, FRAP and TAC) and pre-treatment with microfluidization (DPPH), compared to their respective controls (untreated samples). For lentil proteins, the increases reached 197% (ABTS), 170% (DPPH), 690% (FRAP) and 213% (TAC) for samples submitted to ultrasound post-treatment (ABTS), microfluidization pre-treatment (DPPH) and post-treatment (FRAP), and 75 °C pre-treatment (TAC) compared to their respective controls. Surface hydrophobicity and molecular weight profile by SEC-HPLC analysis indicated modifications in the structures of proteins in function of the different processing technologies. For both proteins, electrophoresis indicated a similar profile for all hydrolysates, regardless of the process applied as pre or post treatment. Solubility of bean and lentil protein concentrates was also improved. These results indicated that different processing technologies can be successfully used in association with enzymatic hydrolysis to improve the antioxidant properties of lentil and bean proteins.

Combination of Milk and Plant Proteins to Develop Novel Food Systems: What Are the Limits?

In the context of a diet transition from animal protein to plant protein, both for sustainable and healthy scopes, innovative plant-based foods are being developing. A combination with milk proteins has been proposed as a strategy to overcome the scarce functional and sensorial properties of plant proteins. Based on this mixture were designed several colloidal systems such as suspensions, gels, emulsions, and foams which can be found in many food products. This review aims to give profound scientific insights on the challenges and opportunities of developing such binary systems which could soon open a new market category in the food industry. The recent trends in the formulation of each colloidal system, as well as their limits and advantages are here considered. Lastly, new approaches to improve the coexistence of both milk and plant proteins and how they affect the sensorial profile of food products are discussed.

Natural organic-inorganic hybrid structure enabled green biomass adhesive with desirable strength, toughness and mildew resistance

Plant based proteins are green, sustainable, and renewable materials that show the potential to replace traditional formaldehyde resin. High performance plywood adhesives exhibit high water resistance, strength, toughness, and desirable mildew resistance. Adding petrochemical-based crosslinkers is not economically viable or environmentally benign; this chemical crosslinking strategy makes the imparted high strength and toughness less attractive. Herein, a green approach based on natural organic-inorganic hybrid structure enhancement is proposed. The design of soybean meal-dialdehyde chitosan-amine modified halloysite nanotubes (SM-DACS-HNTs@N) adhesive with desirable strength and toughness enhanced by covalent bonding (Schiff base) crosslinking and toughened by surface-modified nanofillers is demonstrated. Consequently, the prepared adhesive showed a wet shear strength of 1.53 MPa and work of debonding of 389.7 mJ, which increased by 146.8 % and 276.5 %, respectively, due to the cross-linking effect of organic DACS and toughening effect of inorganic HNTs@N. The introduction of DACS and Schiff base generation enhanced the antimicrobial property of the adhesive and increased the mold resistance of the adhesive and plywood. In addition, the adhesive has good economic benefits. This research creates new opportunities for developing biomass composites with desirable performance.