Potential application of pectin for the stabilization of nanoemulsions

Formation of whey protein, pectin, and chlorogenic acid ternary complexes and their application in emulsions

Physicochemical properties, stability, and digestive behavior of lycopene-loaded emulsions prepared by ternary complexes fabricated with different mixing sequences based on whey protein isolate (WPI), high methoxyl pectin (HMP), and chlorogenic acid (CA) were investigated. Spectroscopic and molecular docking analyses confirmed the non-covalent interactions among the compounds within the ternary complexes, as well as the conformational changes in the protein induced by the mixing sequence. The interfacial tension (6.92-9.44 mN/m) influenced by the different mixing sequences of WPI, HMP and CA was HMP-CA-WPI > WPI-CA-HMP > WPI-HMP-CA, and the size of emulsions stabilized by HMP-CA-WPI was approximately 10 nm larger than that of the other two. Complexes with mixing sequence of HMP, CA and WPI outperformed in antioxidant properties (Ferric reducing power absorbance 0.43, ABTS∙ radical scavenging activity 66.04 %), lycopene retention rate (after UV irradiation 85.11 %, after thermal treatment 83.15 %), and storage stability of emulsions than those prepared by WPI-HMP-CA and WPI-CA-HMP. Emulsions stabilized by different ternary complexes showed similar free fatty acid release profiles (39.62 %-41.59 %) and lycopene bio-accessibility (28.87 %-29.94 %) during digestion. This study mat offer novel insights for the rational utilization in emulsions of ternary complexes based on proteins, polysaccharides, and phenolic acids.

Phycocyanin from microalgae: A comprehensive review covering microalgal culture, phycocyanin sources and stability

As food safety continues to gain prominence, phycocyanin (PC) is increasingly favored by consumers as a natural blue pigment, which is extracted from microalgae and serves the dual function of promoting health and providing coloration. Spirulina-derived PC demonstrates exceptional stability within temperature ranges below 45 °C and under pH conditions between 5.5 and 6.0. However, its application is limited in scenarios involving high-temperature processing due to its sensitivity to heat and light. This comprehensive review provides insights into the efficient production of PC from microalgae, covers the metabolic engineering of microalgae to increase PC yields and discusses various strategies for enhancing its stability in food applications. In addition to the most widely used Spirulina, some red algae and Thermosynechococcus can serve as good source of PC. The genetic and metabolic manipulation of microalgae strains has shown promise in increasing PC yield and improving its quality. Delivery systems including nanoparticles, hydrogels, emulsions, and microcapsules offer a promising solution to protect and extend the shelf life of PC in food products, ensuring its vibrant color and health-promoting properties are preserved. This review highlights the importance of metabolic engineering, multi-omics applications, and innovative delivery systems in unlocking the full potential of this natural blue pigment in the realm of food applications, provides a complete overview of the entire process from production to commercialization of PC, including the extraction and purification.

Nanoemulsion based edible coatings for quality retention of fruits and vegetables-decoding the basics and advancements in last decade

Fruits and vegetables (F&V) are highly perishable and have important contributions to nutritional and economic sustainability. Although the developing nations have shown an immense increase in the production of horticultural commodities, the post-harvest losses are significant and have an adverse impact on the resources, economy, and environment as well. Nanoemulsion-based carriers are recognized for their diversity, natural origin, and immense potential to restrict losses while boosting the functional attributes of produce. The recent findings attest to nanoemulsions potential for extending the shelf life, managing quality, and reducing the losses of the perishables for sustainable livelihood of the farmers. However, further studies are required to evaluate the biological fate, safety, or potential toxicity of the nanoemulsion-based edible coatings. This review precisely focuses on various matrices used in the production of nanoemulsions, fabrication methods, characterization techniques, and the use of natural emulsifiers instead of chemicals. The future research focus stresses on developing low-cost fabrication techniques for nanoemulsion, improvement of the transmission properties i. e gas transmission rate (GTR), water vapor transmission rate (WVTR), and enhancing the performance of monolayer, bilayer, and other composite nanoemulsion base films. This beyond reducing the postharvest losses shall also restrict burden of the food waste management and related environmental issues at the same time.

Exploring carbohydrate extraction from biomass using deep eutectic solvents: Factors and mechanisms

Deep eutectic solvents (DESs) are increasingly being recognized as sustainable and promising solvents because of their unique properties: low melting point, low cost, and biocompatibility. Some DESs possess high viscosity, remarkable stability, and minimal toxicity, enhancing their appeal for diverse applications. Notably, they hold promise in biomass pretreatment, a crucial step in biomass conversion, although their potential in algal biomass carbohydrates extraction remains largely unexplored. Understanding the correlation between DESs' properties and their behavior in carbohydrate extraction, alongside cellulose degradation mechanisms, remains a gap. This review provides an overview of the use of DESs in extracting carbohydrates from lignocellulosic and algal biomass, explores the factors that influence the behavior of DESs in carbohydrate extraction, and sheds light on the mechanism of cellulose degradation by DESs. Additionally, the review discusses potential future developments and applications of DESs, particularly extracting carbohydrates from algal biomass.

Evaluation of pectin extractions and their application in the alkaline Maillard reaction

A 2³ factorial design was used to evaluate the influence of temperature, catalyst and time and esterification degree (DE) of pectin obtained from mango, orange and tangerine peels as well as tamarind seeds by using the acid hydrolysis method. The study showed that a high temperature positively influenced the percentage of pectin yield for the four second generation biomasses. Nevertheless, the temperature showed a greater influence in the solubility and diffusion of the acid solvent in the tamarind seed matrix, resulting a pectin recovery 32.9%. Concerning the %DE, the most statistically significant value observed was dependent on the type of biomass studied. The %DE and the nature of the pectin are determining factors in the pectin's final use, in the present work the pectin extracted was used to produce furfural, a precursor of high value chemicals. The furfural production was achieved through alkaline hydrolysis and enhanced using the Maillard reaction, reaching a maximum concentration of 71.8 g/L which represents a 42.1% increase from the alkaline hydrolysis.

Edible oleogels based on high molecular weight oleogelators and its prospects in food applications

Food industry is actively looking for alternative ingredients to replace saturated and trans fats in foods while preserving their original organoleptic attributes to ensure consumers' acceptance. A plausible approach is the replacement of solid fats with oleogels. Oleogels can be engineered to mimic properties that are commonly played by regular solid fats but using hydrophobic liquid vegetable oil with an optimum fatty acid profile and, they can also act as carriers for lipophilic bioactive substance. Low molecular weight oleogelators (LMOGs) are well studied and reviewed. In contrast, high molecular weight oleogelators (HMOGs) e.g., polysaccharides and proteins, are not fully researched yet. This review focusses on development of HMOG oleogels produced by means of emulsion templated, direct dispersion, foam templated and solvent exchange methods that can influence the stability, physicochemical properties and their potential application in food industry. Multi-component oleogels can solve the inefficiencies in a single component oleogel and, thus, combinations of HMOGs and HMOGs & LMOGs can produce oleogels with desired properties. These new oleogels can find application as fat substitutes in food products, providing better nutritional and sensory acceptance. A comprehensive overview of recent developments in the field of HMOG and multicomponent oleogels with HMOG is deeply reviewed.

Polysaccharide-based nano-delivery systems for encapsulation, delivery, and pH-responsive release of bioactive ingredients

Polysaccharides are natural polymers isolated from plants, microorganisms, algae, and some animals they are composed of aldoses or ketoses linked by glycosidic bonds. Due to the affordability, abundance, safety, and functionality, polysaccharides are widely used in the foods and medicines to construct oral delivery systems for sensitive bioactive ingredients. In this article, the characteristics and applications of nanoscale polysaccharide-based delivery carriers are reviewed, including their ability to encapsulate, protect, and deliver bioactive ingredients. This review discusses the sources, characteristics, and functional properties of common food polysaccharides, including starch, pectin, chitosan, xanthan gum, and alginate. It also highlights the potential advantages of using polysaccharides for the construction of nano-delivery systems, such as nanoparticles, nanogels, nanoemulsions, nanocapsules, and nanofibers. Moreover, the application of delivery systems assembled from polysaccharides is summarized, with a focus on pH-responsive delivery of bioactives. There are some key findings and conclusions: Nanoscale polysaccharide delivery systems provide several advantages, including improved water-dispersibility, flavor masking, stability enhancement, reduced volatility, and controlled release; Polysaccharide nanocarriers can be used to construct pH-responsive delivery vehicles to achieve intestinal-targeted delivery and controlled release of bioactive ingredients; Polysaccharides can be used in combination with other biopolymers to form composite delivery systems with enhanced functional attributes.

Anti-aging properties of phytoconstituents and phyto-nanoemulsions and their application in managing aging-related diseases

Aging is spontaneous and inevitable process in all living beings. It is a complex natural phenomenon that manifests as a gradual decline of physiological functions and homeostasis. Aging inevitably leads to age-associated injuries, diseases, and eventually death. The research on aging-associated diseases aimed at delaying, preventing or even reversing the aging process are of great significance for healthy aging and also for scientific progress. Numerous plant-derived compounds have anti-aging effects, but their therapeutic potential is limited due to their short shelf-life and low bioavailability. As the novel delivery system, nanoemulsion can effectively improve this defect. Nanoemulsions enhance the delivery of drugs to the target site, maintain the plasma concentration for a longer period, and minimize adverse reaction and side effects. This review describes the importance of nanoemulsions for the delivery of phyto-derived compounds and highlights the importance of nanoemulsions in the treatment of aging-related diseases. It also covers the methods of preparation, fate and safety of nanoemulsions, which will provide valuable information for the development of new strategies in treatment of aging-related diseases.

Natural antimicrobial-loaded nanoemulsions for the control of food spoilage/pathogenic microorganisms

Both consumers and producers of food products are looking for natural ingredients and efficient formulation strategies to improve the shelf life of final products. Natural antimicrobial ingredients such as essential oils can be applied as alternatives to synthetic preservatives, but their main challenge is low stability, adverse effects on sensory properties, low solubility, high needed doses, etc. Formulation of these bioactive compounds into nanoemulsions can be an efficient strategy to improve their properties and practical applications in food products. In this review, after an overview on nanoemulsion formulation, ingredients and fabrication methods, different types of natural antimicrobial agents have been discussed briefly. In addition, properties and action mechanisms of antimicrobial-loaded nanoemulsions, along with their application in preservation and shelf life improvement of different food products have been explained. Finally, safety and regulatory issues of antimicrobial delivery via nanoemulsions have been examined. As a conclusion antimicrobial-loaded nanoemulsions can be promising candidates and alternatives for common synthetic preservatives in real food systems.

Biopolymer-derived (nano)catalysts for hydrogen evolution via hydrolysis of hydrides and electrochemical and photocatalytic techniques: A review

Over the course of a few decades, the concern of environmental damages of fossil fuels, an increase in CO₂ emission and a decrease of hydrogen have been growing more and more. Accordingly, hydrogen production is a crucial issue nowadays. Different polymers are applied to attain the purpose. Among all polymers, biodegradables polymers are the best choices to develop the main aim. Polysaccharides and proteins are biodegradable polymers with unique places and advantages with regards to their ecofriendly properties. There are different techniques to apply and achieve the foremost purpose. It is worthwhile to mention that green and facile methods are always attracting attention in different aspects and fields. The three non-polluting and economical techniques, that is, electrochemical hydrogen evolution reaction (HER), photocatalytic technique, and hydrolysis of hydrides, are reviewed in this paper. This review helps researchers, who are environment supporters, to evaluate and choose the most ecological biopolymers and processes in their work.

Citrus pectin modified by microfluidization and ultrasonication: Improved emulsifying and encapsulation properties

In this study, modified citrus pectin treated with a combination of microfluidization and ultrasonication was compared to the original and ultrasonication treated pectin on hydrodynamic diameter, molecular weight, polydispersity, zeta potential, apparent viscosity, Fourier-transform infrared spectroscopy (FTIR), 2,2-diphenyl-1-picryl hydrazyl (DPPH) radical scavenging capacity, scanning electron microscope (SEM), atomic force microscopy (AFM), their emulsifying properties and encapsulation properties. Modified pectin treated with a combination of microfluidization and moderate ultrasonication (MUB) was found to have lowest hydrodynamic diameter (418 nm), molecular weight (237.69 kDa) and polydispersity (0.12), and relatively low apparent viscosity among all pectin samples. Furthermore, it showed significantly higher DPPH radical scavenging capacity than the original pectin although only slightly higher than that of ultrasonication treated one (UB). MUB showed a thin fibrous morphology and decreased degree of branching from SEM and AFM. Emulsion stabilized by MUB had highest centrifugal and thermal stability compared to emulsions stabilized by UB and the original pectin. This could be attributed to higher interfacial loading of MUB (17.90 mg/m²) forming more compact interfacial layer observed by confocal laser scanning microscopy (CLSM). Moreover, both MUB and UB exhibited improved encapsulation functionality to protect cholecalciferol (vitamin D₃) from UV degradation compared to the original pectin.

Recent advances in polysaccharides stabilized emulsions for encapsulation and delivery of bioactive food ingredients: A review

Many bioactive food ingredients were encapsulated in different forms to improve their stability and bioavailability. Emulsions have showed excellent properties in encapsulation, controlled release, and targeted delivery of bioactives. Polysaccharides are widely available and have different structures with different advantages including non-toxic, easily digested, biocompatible and can keep stable over a wide range of pH and temperatures. In this review, the most common polysaccharides and polysaccharide based complexes as emulsifiers to stabilize emulsions in recent ten years are described. The close relationships between the types and structures of polysaccharides and their emulsifying capacities are discussed. In addition, the absorption and bioavailability of bioactive food components loaded in polysaccharide stabilized emulsions are summarized. The main goal of the review is to emphasize the important roles of polysaccharides in stabilizing emulsions. Moreover, speculations regarded to some issues for the further exploration and possible onward developments of polysaccharides stabilized emulsions are also discussed.

Ultrasonic modification of pectin for enhanced 2-furfurylthiol encapsulation: process optimization and mechanisms

BACKGROUND

Pectin is an intriguing polymer, which is usually regarded as a byproduct from agricultural and biological processes. In previous studies, ultrasound treatment has been explored to improve the functionality of pectin but most of that work focused on aspects of molecular structure and the chemical properties of pectin. In this study, we utilized ultrasound treatment to modify the physiochemical properties of pectin. Using ultrasound treatment, we evaluated the emulsifying capability of pectin as a function of ultrasonic time and power density, using a response surface approach. A very potent yet unstable coffee-like aroma compound, 2-furfurylthiol, was also used for comparing the encapsulation feasibility of emulsion made with original pectin and ultrasound-treated pectin.

RESULTS

Our results showed that the particle size of pectin was highly correlated with power density and ultrasound time. Approximately 370 nm of pectin particle size could be reached at a power density of 1.06 W mL^-1 for 40 min. Ultrasound treatment increased emulsion droplet size but significantly improved emulsifying capacities, such as centrifugal stability and surface loading, although it was highly dependent upon the ultrasound treatment condition. When used as the encapsulation wall material, the ultrasound-modified pectin had significantly enhanced performance compared with the original, in terms of flavor retention over time at 45 °C and 65 °C.

CONCLUSION

Ultrasound treatment was able to modify the physiochemical properties of pectin, which thus improved emulsification stability and encapsulation feasibility by forming a thicker layer at the oil / water interface to protect the core materials. © 2019 Society of Chemical Industry.

Structure, bioactivity and applications of natural hyperbranched polysaccharides

In recent years, hyperbranched polymers, especially the natural hyperbranched polysaccharides (HBPSs), are receiving much attention due to their diverse biological activities and applications. With high degree of branching (DB), HBPSs mainly exist in the form of either a comb-brush shape, dendrimer-like particulate, or globular particle. HBPSs also possess some unique properties, such as high density, large spatial cavities, and numerous terminal functional groups, which distinguish them from other polymers. As a natural biopolymer, HBPS has excellent bioavailability, biocompatibility, and biodegradability, which have versatile applications in the fields of food, medicine, cosmetic, and nanomaterials. In this review, the source and structure of HBPSs from plant, animal, microbial and fungal origins as well as their biological functions and applications are covered, with the aim of further advancing the research of their structure and bioactivity.

Nano-scale polysaccharide materials in food and agricultural applications

Potential applications of nanotechnology in food and agriculture include: (1) the encapsulation of functional compounds; (2) production of reinforcing materials; (3) delivery of nutraceuticals in foods; (4) food safety, for detection and control of chemical and microbiological risks; (5) active and intelligent food packaging; (6) incorporation of protective substances of seeds; (7) addition of nutrients in the soil; (8) use of controlled release pesticides. Natural polysaccharides and their derivatives are widely used in the production of nano-scale materials. This chapter examines, the use of polysaccharides, such as starch, cellulose, lignin, pectin, gums, and cyclodextrins for the production of nano-scale materials, including nanocrystals, nanoemulsions, nanocomplexes, nanocapsules, and nanofibers.