An improved energy efficient cluster head selection protocol using the double cluster heads and data fusion methods for IoT applications

An African vulture optimization algorithm based energy efficient clustering scheme in wireless sensor networks

Energy efficiency plays a major role in sustaining lifespan and stability of the network, being one of most critical factors in wireless sensor networks (WSNs). To overcome the problem of energy depletion in WSN, this paper proposes a new Energy Efficient Clustering Scheme named African Vulture Optimization Algorithm based EECS (AVOACS) using AVOA. The proposed AVOACS method improves clustering by including four critical terms: communication mode decider, distance of sink and nodes, residual energy and intra-cluster distance. Through mimicking the natural scavenging behavior of African vultures, AVOACS continuously balances energy consumption on nodes resulting in an increase in network stability and lifetime. For CH selection, we use AVOACS, which considers the following parameters: communication mode decider, the distance between sink and node, residual energy, and intra-cluster distance. In comparison to the OE2-LB protocol, simulation findings demonstrate that AVOACS enhances stability, network lifetime, and throughput by 21.5%, 31.4%, and 16.9%, respectively. The results show that AVOACS is an effective clustering algorithm for energy-efficient operation in heterogeneous WSN environments as it contributes to a large increase of network lifetime and significant enhancement of performance.

Energy-Saving Adaptive Routing for High-Speed Railway Monitoring Network Based on Improved Q Learning

In high-speed railway operational monitoring network systems targeting railway infrastructure as its monitoring objective, there is a wide variety of sensor types with diverse operational requirements. These systems have varying demands on data transmission latency and network lifespan. Most of the previous research focuses only on prolonging network lifetime or reducing data transmission delays when designing or optimizing routing protocols, without co-designing the two. In addition, due to the harsh operating environment of high-speed railways, when the network changes dynamically, the traditional routing algorithm generates unnecessary redesigns and leads to high overhead. Based on the actual needs of high-speed railway operation environment monitoring, this paper proposes a novel Double Q-values adaptive model combined with the existing reinforcement learning method, which considers the energy balance of the network and real-time data transmission, and constructs energy saving and delay. The two-dimensional reward avoids the extra overhead of maintaining a global routing table while capturing network dynamics. In addition, the adaptive weight coefficient is used to ensure the adaptability of the model to each business of the high-speed railway operation environment monitoring system. Finally, simulations and performance evaluations are carried out and compared with previous studies. The results show that the proposed routing algorithm extends the network lifecycle by 33% compared to the comparison algorithm and achieves good real-time data performance. It also saves energy and has fewer delays than the other three routing protocols in different situations.

A Dual Cluster-Head Energy-Efficient Routing Algorithm Based on Canopy Optimization and K-Means for WSN

Wireless sensor networks (WSN) are widely used in various applications, such as environmental monitoring, healthcare, event detection, agriculture, disaster management, and so on. Due to their small size, sensors are limited power sources and are often deployed in special environments where frequent battery replacement is not feasible. Therefore, it is important to reduce the energy consumption of sensors and extend the network lifetime. An effective way to achieve this is clustering. This paper proposes a dual cluster-head energy-efficient algorithm (DCK-LEACH), which is based on K-means and Canopy optimization. Considering that the K-means algorithm is sensitive to the location of the initial clustering centers, this paper uses both the dynamic Canopy algorithm and K-means algorithm for clustering. For cluster-head election, this algorithm uses a hierarchy to minimize the cluster-head burden and balance the network load. The primary cluster-head is selected by two objectives: the node's residual energy and the distance from the node to the clustering center. The vice cluster-head is selected by the residual energy of the node, and the distance from the nodes to the base station. Simulator results show that DCK-LEACH significantly prolongs the energy-critical node lifetime and the network lifetime compared with existing protocols.

Research perspective on energy-efficient protocols in IoT: emerging development of green IoT

Purpose

Internet of Things (IoT) is an up-and-coming conception that intends to link multiple devices with each other. The aim of this study is to provide a significant analysis of Green IoT. The IoT devices sense, gather and send out significant data from their ambiance. This exchange of huge data among billions of devices demands enormous energy. Green IoT visualizes the concept of minimizing the energy consumption of IoT devices and keeping the environment safe.

Design/methodology/approach

This paper attempts to analyze diverse techniques associated with energy-efficient protocols in green IoT pertaining to machine-to-machine (M2M) communication. Here, it reviews 73 research papers and states a significant analysis. Initially, the analysis focuses on different contributions related to green energy constraints, especially energy efficiency, and different hierarchical routing protocols. Moreover, the contributions of different optimization algorithms in different state-of-the-art works are also observed and reviewed. Later the performance measures computed in entire contributions along with the energy constraints are also checked to validate the effectiveness of entire contributions. As the number of contributions to energy-efficient protocols in IoT is low, the research gap will focus on the development of intelligent energy-efficient protocols to build up green IoT.

Findings

The analysis was mainly focused on the green energy constraints and the different robust protocols and also gives information on a few powerful optimization algorithms. The parameters considered by the previous research works for improving the performance were also analyzed in this paper to get an idea for future works. Finally, the paper gives some brief description of the research gaps and challenges for future consideration that helps during the development of an energy-efficient green IoT pertaining to M2M communication.

Originality/value

To the best of the authors’ knowledge, this is the first work that reviews 65 research papers and states the significant analysis of green IoT.

Data Transmission Direction Based Routing Algorithm for Improving Network Performance of IoT Systems

With the continuous development of wireless communication technology, the Internet of Things (IoT) is being used in a wide range of fields. The IoT collects and exchanges large amounts of data with objects, either tangible or intangible, such as sensors or physical devices, connected to the Internet. Wireless sensor networks (WSNs) are components of IoT systems. WSNs are used in various IoT systems, such as monitoring, tracking, and detection systems, to extract relevant information and deliver it to users. WSNs consist of sensor nodes with low power, low cost, and multiple functions. Because sensor nodes have limited resources, such as power and memory, a reduction in the energy efficiency of the sensor nodes in WSNs will lead to a decrease in wireless network performance and an increase in packet loss, which affects IoT system performance. Therefore, this study aimed to find an energy-efficient routing method that extends the lifetime of WSNs by minimizing the battery use of sensor nodes to improve the network performance of IoT systems. Conserving energy from sensor nodes and increasing network throughput in WSNs involves having protocols. The low-energy adaptive clustering hierarchy (LEACH ) protocol is a well-known hierarchical routing protocol in WSNs that constructs clusters and transmits data. LEACH increases energy efficiency by transmitting data from sensor nodes to the base station (BS) through the cluster head. It is widely adopted in the WSN network field, and many protocols are being studied to improve cluster header selection and data transmission to increase the energy efficiency of sensor nodes. In this study, we attempted to improve energy efficiency by removing unnecessary energy from LEACH. In LEACH, when the sensor node is located between the BS and the cluster head, the sensor node transmits data to the cluster head in the opposite direction of the BS. The data sent to the cluster head are transmitted in the direction of the BS. Thus, transmission in the opposite direction consumes unnecessary energy and affects the WSN performance of IoT systems. In this study, we propose a D-LEACH (direction-based LEACH) protocol based on the received signal strength indicator (RSSI) that improves the efficiency of transmission energy considering the data transmission direction of sensor nodes. D-LEACH aims to balance the energy of the sensor nodes and improve the performance of WSNs in the IoT system by reducing unnecessary energy consumption caused by reverse transmission considering the data transmission direction of the sensor nodes. In the course of the paper, we refer to the routing protocol of WSNs to improve network performance and describe LEACH. We also explain the D-LEACH protocol proposed in this paper and confirm the performance improvement of WSNs in an IoT system through simulation.

Marine Observation Beacon Clustering and Recycling Technology Based on Wireless Sensor Networks

Monitoring of marine polluted areas is an emergency task, where efficiency and low-power consumption are challenging for the recovery of marine monitoring equipment. Wireless sensor networks (WSNs) offer the potential for low-energy recovery of marine observation beacons. Reducing and balancing network energy consumption are major problems for this solution. This paper presents an energy-saving clustering algorithm for wireless sensor networks based on k-means algorithm and fuzzy logic system (KFNS). The algorithm is divided into three phases according to the different demands of each recovery phase. In the monitoring phase, a distributed method is used to select boundary nodes to reduce network energy consumption. The cluster routing phase solves the extreme imbalance of energy of nodes for clustering. In the recovery phase, the inter-node weights are obtained based on the fuzzy membership function. The Dijkstra algorithm is used to obtain the minimum weight path from the node to the base station, and the optimal recovery order of the nodes is obtained by using depth-first search (DFS). We compare the proposed algorithm with existing representative methods. Experimental results show that the algorithm has a longer life cycle and a more efficient recovery strategy.