Formation of water-in-oil (W/O) nano-emulsions in a water/mixed non-ionic surfactant/oil systems prepared by a low-energy emulsification method

Preparation and stability investigation of ultrasound-assisted W/O/W multiple nanoemulsions co-loaded with hydrophobic curcumin and hydrophilic arbutin for tyrosinase inhibition

In the present, whitening products are most popular in the cosmetics market, and nanoemulsions are effective drug delivery systems through the skin. The objective of this study was to investigate multiple nanoemulsion formulations for lightning skin effects. The method of this study was the selection of active compounds based on synergistic tyrosinase inhibition activity, formulation preparation by low and high energy methods, physicochemical property determination, stability test, cell toxicity, and anti-melanogenesis in cell culture. From the results, it was found that tyrosinase inhibition with substrate l-tyrosine from the mixture of curcumin and alpha-arbutin gave the highest activity with an IC50 of 63.58 ± 4.99 μM, showed a synergistic effect at a CI value of 0.99, and selected these compounds to develop formulations by the low energy method. However, the most formulations prepared by this method were unstable and phase separated, while the high energy method gave the most formulations with good properties, which were selected for further investigation. The best formulation was 2DS which showed internal droplet morphology in the range of nanometers under a TEM microscope. For 3 months stability test, the formulations had no phase separation and gave the slightly changed values of particle size, polydispersity index (PDI), zeta potentials, and pH values. In addition, multiple nanoemulsions also enhanced the stability of active compounds, with the highest percentage of remaining content of curcumin and arbutin at 94.69 and 90.45 %, respectively at 4 °C for 3 months. In a cell culture test on B16F10, 2DS at 0.05 g/ml gave no cell cytotoxicity and anti-melanogenesis at 57.75 ± 5.74 %, the same potency as kojic acid at a concentration of 20 μg/ml. Therefore, this study will be useful to prepare multiple nanoemulsions for further development into novel health care products.

Intratympanic injections of emulsion-like dispersions to augment cinnarizine amount in a healthy rabbit inner ear model

Aim: To investigate eutectic liquid-based emulsion-like dispersions for intratympanic injections to augment cinnarizine permeability across round window membrane in a healthy rabbit inner ear model.Methods: Two-tier systematic optimization was used to get the injection formula. The drug concentrations in perilymph and plasma were analyzed via. Ultra-performance liquid chromatography-tandem mass spectrometry method after 30-, 60-, 90- and 120-min post intratympanic injection time points in rabbits.Results: A shear-thinning behavior, immediate drug release (∼98.80%, 10 min) and higher cell viability (>97.86%, 24 h) were observed in dispersions. The cinnarizine level of 8168.57 ± 1236.79 ng/ml was observed in perilymph at 30 min post intratympanic injection in rabbits.Conclusion: The emulsion-like dispersions can augment drug permeability through round window membrane.

The wound healing effect of polycaprolactone-chitosan scaffold coated with a gel containing Zataria multiflora Boiss. volatile oil nanoemulsions

AIMS

Thymus plant is a very useful herbal medicine with various properties such as anti-inflammatory and antibacterial. Therefore, the properties of this plant have made this drug a suitable candidate for wound healing. In this study, hydroxypropyl methylcellulose (HPMC) gel containing Zataria multiflora volatile oil nanoemulsion (neZM) along with polycaprolactone/chitosan (PCL-CS) nanofibrous scaffold was used, and the effect of three experimental groups on the wound healing process was evaluated. The first group, HPMC gel containing neZM, the second group, PCL-CS nanofibers, and the third group, HPMC gel containing neZM and bandaged with PCL-CS nanofibers (PCL-CS/neZM). Wounds bandaged with common sterile gas were considered as control.

METHODS

The nanoemulsion was synthesized by a spontaneous method and loaded into a hydroxypropyl methylcellulose (HPMC) gel. The DLS test investigated the size of these nanoemulsions. A PCL-CS nanofibrous scaffold was also synthesized by electrospinning method then SEM and contact angle tests investigated morphology and hydrophilicity/hydrophobicity of its surface. The animal study was performed on full-thickness skin wounds in rats, and the process of tissue regeneration in the experimental and control groups was evaluated by H&E and Masson's trichrome staining.

RESULTS

The results showed that the nanoemulsion has a size of 225±9 nm and has an acceptable dispersion. The PCL-CS nanofibers synthesized by the electrospinning method also show non-beaded smooth fibers and due to the presence of chitosan with hydrophilic properties, have higher surface hydrophobicity than PCL fibers. The wound healing results show that the PCL-CS/neZM group significantly reduced the wound size compared to the other groups on the 7th, 14th, and 21st days. The histological results also show that the PCL-CS/neZM group could significantly reduce the parameters of edema, inflammation, and vascularity and increase the parameters of fibrosis, re-epithelialization, and collagen deposition compared to other groups on day 21.

CONCLUSION

The results of this study show that the PCL-CS/neZM treatment can effectively improve wound healing.

Nano-platform Strategies of Herbal Components for the Management of Rheumatoid Arthritis: A Review on the Battle for Next-Generation Formulations

INTRODUCTION

Rheumatoid arthritis (RA) is a chronic inflammatory autoimmune disease that initially affects small joints and then spreads to the bigger joints. It also affects other organs of the body such as lungs, eyes, kidneys, heart, and skin. In RA, there is destruction of cartilage and joints, and ligaments and tendons become brittle. Damage to the joints leads to abnormalities and bone degradation, which may be quite painful for the patient.

METHOD

The nano-carriers such as liposomes, phytosomes, nanoparticles, microcapsules, and niosomes are developed to deliver the encapsulated phytoconstituents to targeted sites for the better management of RA.

RESULTS

The phytoconstituents loaded nano-carriers have been used in order to increase bioavailability, stability and reduce the dose of an active compound. In one study, the curcumin-loaded phytosomes increase the bioavailability of curcumin and also provides relief from RA symptoms. The drug-loaded nano-carriers are the better option for the management of RA.

CONCLUSION

In conclusion, there are many anti-arthritic herbal and synthetic medicine available in the market that are currently used in the treatment of RA. However, chronic use of these medications may result in a variety of side effects. Because therapy for RA is frequently necessary for the rest of ones life. The use of natural products may be a better option for RA management. These phytoconstituents, however, have several disadvantages, including limited bioavailability, low stability, and the need for a greater dosage. These problems can be rectified by using nano-technology.

The Influences of Emulsification Variables on Emulsion Characteristics Prepared through the Phase Inversion Temperature Method as Engine Fuel

The effects of emulsification variables, such as surfactant type and heating/cooling emulsion processes, on the emulsification characteristics of silicone oil’s emulsions prepared by the phase inversion temperature method were investigated in this study. The water-in-oil (W/O) emulsions have been widely applied to enhance burning efficiency and reduce both pollutant emissions and fuel consumption. The silicone oil was emulsified with de-ionized water with the assistance of nonionic surfactants to form oil-in-water (O/W) emulsions. The hydrophilic–lipophilic balance (HLB) value of the Span 80 and Tween 20 surfactant mixture was set equal to 10 based on their weight proportions and the respective HLB values of the two surfactants. The experimental results show that the emulsions with the Span 80/Tween 20 surfactant mixture appeared to have a higher phase inversion temperature and a larger electrical conductance. On the other hand, it has a lower emulsification stability and a narrower range of phase inversion temperature than the emulsions prepared with a Brij 30 surfactant (polyoxyethylene (4) lauryl ether). The increase in surfactant concentration from 1 wt.% to 10 wt.% decreased the electrical conductance and phase inversion temperature while increasing the suspensibility and absorbance value for the emulsions prepared with either Span 80/Tween 20 mixture or Brij 30.

Magnetic nanofluids (Ferrofluids): Recent advances, applications, challenges, and future directions

Impelled by the need to find solutions to new challenges of modern technologies new materials with unique properties are being explored. Among various new materials that emerged over the decades, magnetic fluids exhibiting interesting physiochemical properties (optical, thermal, magnetic, rheological, apparent density, etc.) under a magnetic stimulus have been at the forefront of research. In the initial phase, there has been a fervent scientific curiosity to understand the field-induced intriguing properties of such fluids but later a plethora of technological applications emerged. Magnetic nanofluid, popularly known as ferrofluid, is a colloidal suspension of fine magnetic nanoparticles, has been at the forefront of research because of its magnetically tunable physicochemical properties and applications. Due to their stimuli-responsive behaviour, they have been finding more applications in biology and other engineering disciplines in recent years. Therefore, a critical review of this topic highlighting the necessary background, the potential of this material for emerging technologies, and the latest developments is warranted. This review also provides a summary of various applications, along with the key challenges and future research directions. The first part of the review addresses the different types of magnetic fluids, the genesis of magnetic fluids, their synthesis methodologies, properties, and stabilization techniques are discussed in detail. The second part of the review highlights the applications of magnetic nanofluids and nanoemulsions (as model systems) in probing order-disorder transitions, scattering, diffraction, magnetically reconfigurable internal structures, molecular interaction, and weak forces between colloidal particles, conformational changes of macromolecules at interfaces and polymer-surfactant complexation at the oil-water interface. The last part of the review summarizes the interesting applications of magnetic fluids such as heat transfer, sensors (temperature, pH, urea detection, cations, defect detection sensors), tunable optical filters, removal of dyes, dynamic seals, magnetic hyperthermia-based cancer therapy and other biomedical applications. The applications of magnetic nanofluids in diverse disciplines are growing day by day, yet there are challenges in their practical adaptation as field-worthy or packaged products. This review provides a pedagogical description of magnetic fluids, with the necessary background, key concepts, physics, experimental protocols, design of experiments, challenges and future directions.

Near-Infrared Spectroscopy Coupled with Chemometrics and Artificial Neural Network Modeling for Prediction of Emulsion Droplet Diameters

There is increased interest in the food industry for emulsions as delivery systems to preserve the stability of sensitive biocompounds with the aim of improving their bioavailability, solubility, and stability; maintaining their texture; and controlling their release. Emulsification in continuously operated microscale devices enables the production of emulsions of controllable droplet sizes and reduces the amount of emulsifier and time consumption, while NIR, as a nondestructive, noninvasive, fast, and efficient technique, represents an interesting aspect for emulsion investigation. The aim of this work was to predict the average Feret droplet diameter of oil-in-water and oil-in-aqueous mint extract emulsions prepared in a continuously operated microfluidic device with different emulsifiers (PEG 1500, PEG 6000, and PEG 20,000) based on the combination of near-infrared (NIR) spectra with chemometrics (principal component analysis (PCA) and partial least-squares (PLS) regression) and artificial neural network (ANN) modeling. PCA score plots for average preprocessed NIR spectra show the specific grouping of the samples into three groups according to the emulsifier used, while the PCA analysis of the emulsion samples with different emulsifiers showed the specific grouping of the samples based on the amount of emulsifier used. The developed PLS models had higher R² values for oil-in-water emulsions, ranging from 0.6863 to 0.9692 for calibration, 0.5617 to 0.8740 for validation, and 0.4618 to 0.8692 for prediction, than oil-in-aqueous mint extract emulsions, with R² values that were in range of 0.8109-0.8934 for calibration, 0.5017-0.6620, for validation and 0.5587-0.7234 for prediction. Better results were obtained for the developed nonlinear ANN models, which showed R² values in the range of 0.9428-0.9917 for training, 0.8515-0.9294 for testing, and 0.7377-0.8533 for the validation of oil-in-water emulsions, while for oil-in-aqueous mint extract emulsions R² values were higher, in the range of 0.9516-0.9996 for training, 0.9311-0.9994 for testing, and 0.8113-0.9995 for validation.

Stabilization of water-in-oil emulsion of Pulicaria jaubertii extract by ultrasonication: Fabrication, characterization, and storage stability

This study investigated the effect of ultrasonic treatments on the properties and stability of the water-in-oil (W/O) emulsion of Pulicaria jaubertii (PJ) extract. The study used different ultrasound powers (0, 100, 200, 400, and 600 W) at two storage degrees (4 and 25 °C) for 28 days. The findings showed that the emulsifying properties were improved to different extents after ultrasonic treatments. The treatment at 600 W showed optimum particle size, polydispersity index, emulsifying property, viscosity properties, and release of total phenolic content than the other powers. However, the ultrasonic power of 400 W gave positive effects on creaming index and antioxidant release compared to 600 W. The emulsion stored at 4 °C presented higher stability than that stored at 25 °C during the 28 days of storage. Microscopically, the increase in sonication power up to 600 W reduced particle size and decreased flocculation, thus resulted in stable emulsions, which is desirable for its applications in food systems.

Therapeutic Nanoemulsion: Concept to Delivery

Nanoemulsions (NEs) or nanometric-scaled emulsions are transparent or translucent, optically isotropic and kinetically stable heterogeneous system of two different immiscible liquids namely, water and oil stabilized with an amphiphilic surfactant having droplet size ranges up to 100 nm. They offer a variety of potential interests for certain applications: improved deep-rooted stability; excellent optical clarity; and, enhanced bioavailability due to its nanoscale of particles. Though there is still comparatively narrow insight apropos design, development, and optimization of NEs, which mainly stems from the fact that conventional characteristics of emulsion development and stabilization only partly apply to NEs. The contemporary article focuses on the nanoemulsion dosage form journey from concept to key application in drug delivery. In addition, industrial scalability of the nanoemulsion, as well as its presence in commercial and clinical practice, are also addressed.

Improving the In Vitro Bioaccessibility of β-Carotene Using Pectin Added Nanoemulsions

The intestinal absorption of lipophilic compounds such as β-carotene has been reported to increase when they are incorporated in emulsion-based delivery systems. Moreover, the reduction of emulsions particle size and the addition of biopolymers in the systems seems to play an important role in the emulsion properties but also in their behavior under gastrointestinal conditions and the absorption of the encapsulated compound in the intestine. Hence, the present study aimed to evaluate the effect of pectin addition (0%, 1%, and 2%) on the physicochemical stability of oil-in-water nanoemulsions containing β-carotene during 35 days at 4 °C, the oil digestibility and the compound bioaccessibility. The results showed that nanoemulsions presented greater stability and lower β-carotene degradation over time in comparison with coarse emulsion, which was further reduced with the addition of pectin. Moreover, nanoemulsions presented a faster digestibility irrespective of the pectin concentration used and a higher β-carotene bioaccessibility as the pectin concentration increased, being the maximum of ≈36% in nanoemulsion with 2% of pectin. These results highlight the potential of adding pectin to β-carotene nanoemulsions to enhance their functionality by efficiently preventing the compound degradation and increasing the in vitro bioaccessibility.

Nanoparticles fabricated from bulk solid lipids: Preparation, properties, and potential food applications

Unlike conventional emulsions, solid lipids are used to prepare solid lipid nanoparticles (SLNs) with crystalline structures and nanostructured lipid carriers (NLCs) with imperfect crystals or amorphous structures to encapsulate various bioactive compounds significant to food applications. The solid lipid matrix can stabilize particle structures and control release properties of the encapsulated compounds that may not be possible for emulsions with liquid droplets. In this review, common approaches of preparing SLNs and NLCs are first presented, followed by parameters used to study lipid particles, including dimensional, morphological, charge, thermal, and crystalline properties. The structures of SLNs and NLCs with respect to the release mechanisms of encapsulated compounds are discussed in the context of lipid and emulsifier chemistry and preparation conditions. Lastly, possible applications of SLNs and NLCs in food systems are discussed.

Preparation of α-Linolenic-Acid-Loaded Water-in-Oil-in-Water Microemulsion and Its Potential as a Fluorescent Delivery Carrier with a Free Label

Our previous work has demonstrated that α-linolenic acid (ALA)-loaded oil-in-water (O/W) microemulsion could enhance ALA antioxidant capacity. Meanwhile, we also observed that synthesized microemulsion itself had fluorescence. In this work, we have prepared a multiple water-in-oil-in-water (W/O/W) microemulsion to further enhance ALA antioxidant capacity and activate this delivery carrier application potential with a free label. The compositions of primary water-in-oil (W/O) microemulsion were obtained using pseudo-ternary phase diagrams, and then W/O/W microemulsion was prepared adopting the "two-step heterotherm method". The conductivity of W/O/W microemulsion was measured to lie between 250.0 and 350.0 μs/cm. The spherical droplets with a mean particle diameter of 10.0-20.0 nm were confirmed by transmission electron microscopy and dynamic light scattering. Nuclear magnetic resonance confirmed that ALA diffused to the multiple water-oily interface simultaneously. In addition, the in vitro release and antioxidant capacity measurements of ALA-loaded W/O/W microemulsion concluded the sustained-release effect and excellent antioxidant capacity. The fluorescent intensity of W/O/W microemulsion was markedly increased in comparison to O/W microemulsion. The synthesized microemulsion could lead to important applications and have advantages of a label-free fluorescent carrier for optical imaging purposes.

Preparation and Characterization of Water-Based Nano-Perfumes

The application of nanoemulsions as a novel delivery system for lipophilic materials, such as essential oils, flavors, and fragrances is one of the growing technologies used in cosmetic, pharmaceutical, and food industries. Their characteristic properties, like small droplet size with high interfacial area, transparent or semi-transparent appearance, low viscosity, and high kinetic stability, make them a perfect vehicle for fragrances, in the perfume industry. They could be a great alternative to water-based perfumes, without alcohol, and solve problems related to the oxidation and low bioavailability of fragrances with other non-alcoholic vehicles of perfumes like pomades or gels. The aim of our study was to develop stable Oil-in-Water (O/W) nanoemulsions that are compatible with selected fragrance compositions, without ethanol, polyols, and ionic surfactants, and to study their physicochemical, microbiological, and dermatological properties. The nano-perfume systems were obtained with a low-energy (Phase Inversion Composition; PIC) and with a high-energy (ultrasound, US) method, taking into account the possibility of moving from the laboratory scale to an industrial scale. The optimized nano-perfume formulations, prepared with different methods, yielded the same physicochemical properties (stability, medium droplet size of the inner phase, polydispersity, viscosity, surface tension, pH, density). Stable systems were obtained with a fragrance composition concentration within 6⁻15% range. These formulations had a low viscosity and a pH suitable for the skin. Moreover, the obtained results confirmed the protective role of nanoemulsions. The peroxide number measurement (POV) showed that the tested fragrance compositions had a high chemical stability. The results of the microbiological tests confirmed that the obtained products were free of microbiological contamination and were appropriately preserved. The dermatological test results confirmed the safety of the developed preparations.

Nanoemulsions in drug delivery: formulation to medical application

Nanoscale oil-in-water emulsions (NEs), heterogeneous systems of two immiscible liquids stabilized by emulsifiers or surfactants, show great potential in medical applications because of their attractive characteristics for drug delivery. NEs have been explored as therapeutic carriers for hydrophobic compounds via various routes of administration. NEs provide opportunities to improve drug delivery via alternative administration routes. However, deep understanding of the NE manufacturing and functionalization fundamentals, and how they relate to the choice of administration route and pharmacological profile is still needed to ease the clinical translation of NEs. Here, we review the diversity of medical applications for NEs and how that governs their formulation, route of administration, and the emergence of increasing sophistication in NE design for specific application.

Curcumin-loaded low-energy nanoemulsions as a prototype of multifunctional vehicles for different administration routes: Physicochemical and in vitro peculiarities important for dermal application

The objective of this work was to investigate and profoundly characterize low-energy nanoemulsions as multifunctional carriers, with slight reference to dermal administration. An evidence-based approach was offered for deepening the knowledge on their formation via spontaneous emulsification. Curcumin, a compound of natural origin, potentially powerful therapeutic, was chosen as a model API. Due to curcumin's demanding properties (instability, poor solubility, low permeability), its potentials remain unreached. Low-energy nanoemulsions were considered carriers capable of overcoming imposed obstacles. Formulation consisting of Polysorbate 80 and soybean lecithin as stabilizers (9:1, 10%), medium-chain triglycerides as the oil phase (10%) and ultrapure water was selected for curcumin incorporation in 3 different concentrations (1, 2 and 3 mg/mL). Physicochemical stability was demonstrated during 3 months of monitoring (mean droplet size: 111.3-146.8 nm; PDI < 0.2; pH: 4.73-5.73). Curcumin's release from developed vehicles followed Higuchi's kinetics. DPPH (IC50 = 0.1187 mg/mL) and FRAP (1.19 ± 0.02 mmol/g) assays confirmed that curcumin acts as a potent antioxidant through different mechanisms, with no alterations after incorporation in the formulation. High biocompatibility in line with antigenotoxic activity of curcumin-loaded formulations (protective and reparative) was estimated through Comet assay. A multidisciplinary approach is needed to fully characterize developed systems, directing them to more concrete application possibilities.

A General Route for Nanoemulsion Synthesis Using Low-Energy Methods at Constant Temperature

The central dogma of nanoemulsion formation using low-energy methods at constant temperature-popularly known as the emulsion inversion point (EIP) method-is that to create O/W nanoemulsions, water should be added to a mixture of an oil and surfactant. Here, we demonstrate that the above order of mixing is not universal and a reverse order of mixing could be superior, depending on the choice of surfactant and liquid phases. We propose a more general methodology to make O/W as well as W/O nanoemulsions by studying the variation of droplet size with the surfactant hydrophilic-lypophilic balance for several model systems. Our analysis shows that surfactant migration from the initial phase to the interface is the critical step for successful nanoemulsion synthesis of both O/W and W/O nanoemulsions. On the basis of our understanding and experimental results, we utilize the reverse order of mixing for two applications: (1) crystallization and formulation of pharmaceutical drugs with faster dissolution rates and (2) synthesis of alginate-based nanogels. The general route provides insights into nanoemulsion formation through low-energy methods and also opens up possibilities that were previously overlooked in the field.

Design Expert(®) supported optimization and predictive analysis of selegiline nanoemulsion via the olfactory region with enhanced behavioural performance in Parkinson's disease

Selegiline is a monoamine oxidase B (MAO-B) inhibitor and is used in the treatment of Parkinson's disease. The main problem associated with its oral administration is its low oral bioavailability (10%) due to its poor aqueous solubility and extensive first pass metabolism. The aim of the present research work was to develop a nanoemulsion loaded with selegiline for direct nose-to-brain delivery for the better management of Parkinson's disease. A quality by design (QbD) approach was used in a statistical multivariate method for the preparation and optimization of nanoemulsion. In this study, four independent variables were chosen, in which two were compositions and two were process variables, while droplet size, transmittance, zeta potential and drug release were selected as response variables. The optimized formulation was assessed for efficacy in Parkinson's disease using behavioural studies, namely forced swimming, locomotor, catalepsy, muscle coordination, akinesia and bradykinesia or pole test in Wistar rats. The observed droplet size, polydispersity index (PDI), refractive index, transmittance, zeta potential and viscosity of selegiline nanoemulsion were found to be 61.43 ± 4.10 nm, 0.203 ± 0.005, 1.30 ± 0.01, 99.80 ± 0.04%, -34 mV and 31.85 ± 0.24 mPas respectively. Surface characterization studies demonstrated a spherical shape of nanoemulsion which showed 3.7 times enhancement in drug permeation as compared to drug suspension. The results of behaviour studies showed that treatment of haloperidol induced Parkinson's disease in rats with selegiline nanoemulsion (administered intranasally) showed significant improvement in behavioural activities in comparison to orally administered drug. These findings demonstrate that nanoemulsion could be a promising new drug delivery carrier for intranasal delivery of selegiline in the treatment of Parkinson's disease.

Nanoemulsions: formation, properties and applications

Nanoemulsions are kinetically stable liquid-in-liquid dispersions with droplet sizes on the order of 100 nm. Their small size leads to useful properties such as high surface area per unit volume, robust stability, optically transparent appearance, and tunable rheology. Nanoemulsions are finding application in diverse areas such as drug delivery, food, cosmetics, pharmaceuticals, and material synthesis. Additionally, they serve as model systems to understand nanoscale colloidal dispersions. High and low energy methods are used to prepare nanoemulsions, including high pressure homogenization, ultrasonication, phase inversion temperature and emulsion inversion point, as well as recently developed approaches such as bubble bursting method. In this review article, we summarize the major methods to prepare nanoemulsions, theories to predict droplet size, physical conditions and chemical additives which affect droplet stability, and recent applications.

Nanoemulsion as a topical delivery system of antipsoriatic drugs

Nanoemulsion as a potential enhancer for the treatment of psoriasis.

Cryogenic electron microscopy study of nanoemulsion formation from microemulsions

We examine a process of preparing oil-in-water nanoemulsions by quenching (diluting and cooling) precursor microemulsions made with nonionic surfactants and a cosurfactant. The precursor microemulsion structure is varied by changing the concentration of the cosurfactant. Water-continuous microemulsions produce initial nanoemulsion structures that are small and simple, mostly unilamellar vesicles, but microemulsions that are not water-continuous produce initial nanoemulsion structures that are larger and multilamellar. Examination of these structures by cryo-electron microscopy supports the hypothesis that they are initially vesicular structures formed via lamellar intermediate structures, and that if the lamellar structures are too well ordered they fail to produce small simple structures.

Nanoemulsion for solubilization, stabilization, and in vitro release of pterostilbene for oral delivery

Pterostilbene, being extracted from many plants, has significant biological activities in preventing cancer, diabetes, and cardiovascular diseases so as to have great potential applications in pharmaceutical fields. But the poor solubility and stability of pterostilbene strictly restrained its applications. As a good protection and oral delivery system, an optimal nanoemulsion for pterostilbene was developed by using low-energy emulsification method. Systematic pseudo-ternary phase diagrams have been studied in optimization of nanoemulsion formulations. The prepared pterostilbene nanoemulsion was characterized by transmission electron microscope, Fourier transform Raman spectrum, and laser droplet size analyzer. Nanoemulsion droplets are circular with smooth margin, and the mean size is 55.8 ± 10.5 nm. The results illustrated that the nanoemulsion as oral delivery system dramatically improved the stability and solubility of pterostilbene, and in vitro release of pterostilbene was significantly improved (96.5% in pH 3.6 buffer; 13.2% in pH 7.4 buffer) in comparison to the pterostilbene suspension (lower than 21.4% in pH 3.6 buffer; 2.6% in pH 7.4 buffer).

Optimization of ultrasonic emulsification conditions for the production of orange peel essential oil nanoemulsions

The aim of the present study was to investigate the influence of emulsifying conditions on some physical and rheological properties of orange peel essential oil (OPEO) in water nanoemulsions. In this regard, using the response surface methodology, the influence of ultrasonication conditions including sonication amplitude (70-100 %), sonication time (90-150 s) and process temperature (5-45 °C) on the mean droplets diameter (Z-average value), polydispersity index (PDI), and viscosity of the OPEO nanoemulsions was evaluated. In addition, the flow behavior and stability of selected nanoemulsions was evaluated during storage (up to 3 months) at different temperatures (5, 25 and 45 °C). Based on the results of the optimization, the optimum conditions for producing OPEO nanoemulsions (Z-average value 18.16 nm) were determined as 94 % (sonication amplitude), 138 s (sonication time) and 37 °C (process temperature). Moreover, analysis of variance (ANOVA) showed high coefficients of determination values (R (2) > 0.95) for the response surface models of the energy input and Z-average. In addition, the flow behavior of produced nanoemulsions was Newtonian, and the effect of time and storage temperature as well as their interactions on the Z-average value was highly significant (P < 0.0001).

Transparent dispersions of milk-fat-based nanostructured lipid carriers for delivery of β-carotene

Nanostructured lipid carriers (NLCs) are possible vehicles to incorporate lipophilic bioactive compounds in transparent functional beverages. In this work, anhydrous milk fat (AMF) and Tween 80 were used to prepare NLCs using a phase-inversion temperature method, and β-carotene was used as a model lipophilic bioactive compound. The phase-inversion temperature decreased from >95 to 73 °C, when NaCl increased from 0 to 1.0 M in the aqueous phase. At 0.8 M NaCl and phase inversion by heating at 90 °C for 30 min, transparent NLC dispersions were observed at AMF levels higher than 10% (w/w), corresponding to particles smaller than ~25 nm. The NLC dispersions were dilution- and dialysis-stable and maintained turbidity and particle size during 90 days of storage at room temperature. The degradation of β-carotene encapsulated in NLCs was much reduced when compared to its encapsulation in the soybean-oil-based nanoemulsion.