Highly efficient removal of phosphate by lanthanum-doped mesoporous SiO2

Studies on ultrafast and remarkable removal of phosphate from sewage water by metal-organic frameworks

In the proposed research, a lanthanum-doped metal-organic framework (La-ATP) has been synthesised to remove phosphate from contaminated aqueous solutions. La-ATP was synthesised by a green energy-saving route using microwave irradiation and exhibited a phenomenal sorption capacity of 290 mg/g for the removal of phosphate. At a minimal dose of 0.1 g/L, 25 mg/L of phosphate gets reduced to 6.3 mg/L within 5 min and reaches equilibrium in 25 min. The isoelectric point of La-ATP was found to be 8.99, and it is efficient in removing phosphate over a wide range of pH 5-10. The existence of commonly occurring competing anions like sulphate, fluoride, chloride, arsenate, bicarbonate, and nitrate does not affect the uptake capacity of La-ATP towards phosphate ions. Furthermore, the robustness of La-ATP is demonstrated by its applicability to remove phosphate from real-life sewage water by reducing 10 mg/L of phosphorus from sewage water to < 0.02 mg/L. The primary mechanism governing phosphate removal was found to be ionic interaction and ligand exchange. Therefore, La-ATP can be considered a viable candidate for the treatment of eutrophic water streams because of its high sorption capacity, super-fast kinetics, and adaptability to contaminated sewage.

Highly stable and efficient Cr(VI) immobilization from water by adsorption with the La-substituted ferrihydrite as a naturally-occurring geosorbent in soils

Ferrihydrite (Fh) is a vital geosorbent in the natural environment. Here, Fh materials with lanthanum (La) substituted in varied La/La + Fe ratios were synthesized, and these La-Fh materials were investigated in-depth via adsorption kinetic and isothermal experiments to explore their adsorption performance for chromate [Cr(VI)] in soils. Material properties of La-Fh were further characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FTIR), and X-ray photoelectron spectroscopy (XPS). The results clearly indicate that La³⁺ can be integrated into the Fh lattice, but the increase in La amount substituted into Fh is slowed down when the La/La + Fe ratio reaches to a larger value. Those La³⁺ cations that fail to become integrated may either get adsorbed or form a phase of La(OH)₃ on La-Fh surfaces. We also find that La substitution reduces the specific surface area (SSA) of La-Fh samples but raises their pH_pzc, which hampers La-Fh conversion to hematite and thus increases the chemical stability. These changes are related to the La-Fh structure and surface aspects, but they do not negatively affect the Cr(VI) adsorption efficacy, which can be promoted over a wide pH range to an alkaline pH. For instance, the maximum adsorption amount of Cr(VI) by 20%La-Fh is 30.2 mg/g at a near-neutral pH. However, the entire chromate adsorption processes are affected by H₂PO₄^- and humic acid due to their strong affinities for Cr(VI), but almost not influenced by NO₃^- and Cl^-. All the Cr(VI)-Fh reactions are well described by the fitted adsorption Freundlich model and conform to the pseudo-second-order reaction kinetic equation. The mechanisms which enhance La-Fh's adsorption ability for Cr(VI) are governed by chemical interactions, because La substitution can increase the hydroxyl density on Fh surfaces and thus improve the reactivity of La-Fh towards Cr(VI), leading to an evidently enhanced Cr(VI) immobilization onto La-Fh.

Phosphorus removal and recovery: state of the science and challenges

Phosphorus is one of the main nutrients required for all life. Phosphorus as phosphate form plays an important role in different cellular processes. Entrance of phosphorus in the environment leads to serious ecological problems including water quality problems and soil pollution. Furthermore, it may cause eutrophication as well as harmful algae blooms (HABs) in aquatic environments. Several physical, chemical, and biological methods have been presented for phosphorus removal and recovery. In this review, there is an overview of phosphorus role in nature provided, available removal processes are discussed, and each of them is explained in detail. Chemical precipitation, ion exchange, membrane separation, and adsorption can be listed as the most used methods. Identifying advantages of these technologies will allow the performance of phosphorus removal systems to be updated, optimized, evaluate the treatment cost and benefits, and support select directions for further action. Two main applications of biochar and nanoscale materials are recommended.

Lanthanum hydroxide engineered sewage sludge biochar for efficient phosphate elimination: Mechanism interpretation using physical modelling

In the present study, lanthanum hydroxide (La OH)-engineered sewage sludge biochar (La-SSBC) was utilized for efficient phosphate elimination from an aqueous medium. A high adsorption capacity of 312.55 mg P/g was achieved using La-SSBC at 20 °C, which was an excellent adsorbent performance in comparison to other biochar-based adsorbents. Additionally, the performance of La-SSBC was stable even at wider range of pH level, the existence of abundant active anions, and recycling experiments. Statistical physics modeling with the fitting method based on the Levenberg-Marquardt iterating algorithm, as well as various chemical characterizations, suggested the unique double-layered mechanism of phosphate capturing: one functional group of La-SSBC adsorbent describing a prone direction of the PO₄ ions on the stabilize surface in a multi-ionic process, forming the first layer adsorption. Additionally, SSBC played an important role by releasing positively charged cations in solution, overcoming the electronic repulsion to form a second layer, and achieving excellent adsorption capacity. The calculation of multiple physicochemical parameters including adsorption energy further evidenced the process. This two-layered mechanism sheds light on the complex interaction between phosphate and biochar. Moreover, the management of sewage sludge associated with the requirement of cost-effectively and environmentally acceptable mode. Therefore, the present investigation demonstrated an efficient approach of the simultaneous sewage sludge utilization and phosphate removal.

Confined La2O3 particles in mesoporous carbon material for enhanced phosphate adsorption

Novel phosphate adsorbents with confined La2O3 inside mesoporous carbon were fabricated by the solid-state grinding method using pristine mesoporous carbon material CMK-3 (PCMK-3) and oxidized CMK-3 (OCMK-3) as the matrixes (denoted as La2O3@PCMK-3 and La2O3@OCMK-3). Compared with pure La2O3, La2O3@PCMK-3 and La2O3@OCMK-3 exhibited higher normalized phosphate adsorption capacity, indicative of efficient loading of La2O3 inside the mesopores of the carbon materials. Furthermore, La2O3 loading led to substantially enhanced phosphate adsorption. The adsorption capacities of La2O3@OCMK-3 samples were higher than those of La2O3@PCMK-3 samples, possibly owing to the oxygen-containing groups forming in OCMK-3 during HNO3 oxidation, which enhanced the dispersion of La2O3 in the mesopores of OCMK-3. The adsorption capacities of La2O3@PCMK-3 and La2O3@OCMK-3 increased with the La2O3 loading amount. Phosphate adsorption onto La2O3(14.7)@PCMK-3 followed the pseudo-second-order kinetics with respect to correlation coefficient values (larger than 0.99). As pH increased from 3.4 to 12.0, the phosphate adsorption amounts of La2O3(14.7)@PCMK-3 and La2O3(15.7)@OCMK-3 decreased from 37.64 mg g-1 and 37.08 mg g-1 to 21.92 mg g-1 and 14.18 mg g-1, respectively. Additionally, La2O3@PCMK-3 showed higher adsorption selectivity towards phosphate than coexisting Cl-,NO 3 - andSO 4 2 - . The adsorbent La2O3(14.7)@PCMK-3 remained stable after five regeneration cycles.

Emerging lanthanum (III)-containing materials for phosphate removal from water: A review towards future developments

The last two decades have seen a rise in the development of lanthanum (III)-containing materials (LM) for controlling phosphate in the aquatic environment. >70 papers have been published on this topic in the peer-reviewed literature, but mechanisms of phosphate removal by LM as well as potential environmental impacts of LM remain unclear. In this review, we summarize peer-reviewed scientific articles on the development and use of 80 different types of LM in terms of prospective benefits, potential ecological impacts, and research needs. We find that the main benefits of LM for phosphate removal are their ability to strongly bind phosphate under diverse environmental conditions (e.g., over a wide pH range, in the presence of diverse aqueous constituents). The maximum phosphate uptake capacity of LM correlates primarily with the La content of LM, whereas reaction kinetics are influenced by LM formulation and ambient environmental conditions (e.g., pH, presence of co-existing ions, ligands, organic matter). Increased La solubilization can occur under some environmental conditions, including at moderately acidic pH values (i.e., < 4.5-5.6), highly saline conditions, and in the presence of organic matter. At the same time, dissolved La will likely undergo hydrolysis, bind to organic matter, and combine with phosphate to precipitate rhabdophane (LaPO₄·H₂O), all of which reduce the bioavailability of La in aquatic environments. Overall, LM use presents a low risk of adverse effects in water with pH > 7 and moderate-to-high bicarbonate alkalinity, although caution should be applied when considering LM use in aquatic systems with acidic pH values and low bicarbonate alkalinity. Moving forward, we recommend additional research dedicated to understanding La release from LM under diverse environmental conditions as well as long-term exposures on ecological organisms, particularly primary producers and benthic organisms. Further, site-specific monitoring could be useful for evaluating potential impacts of LM on both biotic and abiotic systems post-application.

Adsorptive removal of phosphate by a Fe–Mn–La tri-metal composite sorbent: Adsorption capacity, influence factors, and mechanism

Reducing input of phosphorus is the key step for control of eutrophication and algal blooming in freshwater lakes. Adsorption technology is a cost-effective technology for phosphate removal in water for the purpose. Thus, in this study, a novel Fe–Mn–La tri-metal composite sorbent was developed, and then evaluated for phosphate removal. The results showed that the maximum adsorption capacity could be approached to 61.80 mg g−1 at 25°C under pH of 6.03. Adsorption of phosphate by Fe–Mn–La tri-metal composite adsorbent fitted better by pseudo-second-order kinetic equation and Langmuir model, which suggested that the adsorption process was surface chemical reactions and mainly in a monolayer coverage manner. The thermodynamic study indicated that the adsorption reaction was an endothermic process. The phosphate removal gradually decreased with the increasing of pH from 3.02 to 11.00. The sequence of coexisting anions competing with phosphates was that CO32− > Cl− > SO42− > NO3−. Dissolved organic matter, fulvic acid as a representative, would also decrease adsorption capacities of phosphate by Fe–Mn–La tri-metal composite adsorbents. Adsorption capacity would be decreased with increasing addition of adsorbents, while removal efficiency would be increased in this process. The Fe–Mn–La tri-metal composite adsorbent showed a good reusability when applied to removal of dissolved phosphate from aqueous solutions. The Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy analyses indicated that some hydroxyl groups (–OH) on the surface of adsorbent were replaced by the adsorbed PO43−, HPO42−, or H2PO4−. Aggregative results showed that the novel Fe–Mn–La tri-mental composite sorbent is a very promising adsorbent for the removal of phosphate from aqueous solutions.

An innovative lanthanum carbonate grafted microfibrous composite for phosphate adsorption in wastewater

Excessive presence of phosphorus in waters can cause eutrophication, a global unsolved environmental problem that has caused harmful effects to our eco-system and the source of our drinking water. In the study presented in this paper, a novel lanthanum carbonate grafted microfibrous composite (LC-MC) adsorbent was synthesized aiming at removing large amount of phosphate in wastewater efficiently. An optimized LC-MC was firstly prepared. The most suitable pH for the phosphate uptake was pH 7 to 9. The adsorption showed similar behavior in a wide range of ionic strength. The presence of co-existing anions was proved to have a less significant effect on the removal. The adsorption isotherm data were better fitted by the Freundlich isotherm than the Langmuir isotherm. The equilibrium was reached at about 300 min of contact time. 80 % of original adsorption capacity can be achieved even after 5 cycles of adsorption- desorption operations, indicating great regenerative performance of the adsorbent. The adsorption mechanism study showed that the ligand exchange played a key role during the phosphate adsorption.

Water treatment residual: A critical review of its applications on pollutant removal from stormwater runoff and future perspectives

In recent years, many studies have been conducted on using different filter media in bioretention systems for stormwater runoff treatment. This critical review paper provides a comprehensive review on the current state of water treatment residual (WTR), a recycled material that can be used as bioretention filter media for removals of key stormwater runoff pollutants (especially phosphorus) and future perspectives with innovative modification on WTR applied for pathogen removal from stormwater runoff. This review paper comprised (i) a brief summary of the reported WTR characteristics, (ii) a thorough evaluation of WTR performance on major pollutants removal from stormwater runoff (iii) a discussion on phosphorus removal mechanisms by WTR applied in the stormwater runoff treatment, and (iv) a review of the future perspectives of WTR for pathogen removal and other potential practical application in the field of stormwater treatment. As outlined in this review, WTR in stormwater runoff treatment has yet to be fully explored. The possible enhancements, especially metal surface modification on WTR are reviewed to bring about the widespread use of WTR in stormwater reuse practices.

Adsorption of chlortetracycline from aquaculture wastewater using modified zeolites

In this study, lanthanum modified zeolite (La-Z) was used to adsorb chlortetracycline (CTC) from aquaculture wastewater. La-Z was characterized by SEM, TEM, EDS, XRD, FTIR and BET. The effects various factors on the adsorption of CTC by La-Z were investigated, including the lanthanum modification concentration on zeolites, the dosage of La-Z, solution pH and reaction time. Orthogonal experiments were performed to determine the optimal adsorption conditions. Adsorption kinetics were studied by quasi-first-order model, quasi-second-order model, Weber-Morris, Boyd and Bangham models, while isotherms were analyzed by the Langmuir and Freundlich models. The removal rate reached 98.4%, when the modified concentration was 0.02 mol/L, the adsorbent dosage was 0.04 g, the initial concentration of CTC was 5 mg/L, the adsorption time was 20 min, and the pH was 7. The initial CTC concentration had the greatest influence on the adsorption process. The kinetic results showed a significant linear correlation between the experimental results and the quasi-second-order kinetic model. From the results of the internal diffusion model, it was found that the La-Z adsorption rate was controlled by both internal diffusion and external diffusion, in a multi-step process. The adsorption isotherm conforms to the Langmuir model, with the maximum adsorption quantity reaching 127.55 mg/g. Thermodynamic analysis showed that the adsorption process was an endothermic process of entropy increase, which occurs spontaneously.

Phosphate Removal from Secondary Effluents Using Coal Gangue Loaded with Zirconium Oxide

Phosphorus from secondary effluents and coal gangue from coal mining have caused serious environmental problems. The feasibility of phosphate removal from secondary effluents using calcinated coal gangue loaded with zirconium oxide (CCG-Zr) was explored. Major influencing factors like the calcinated temperature, CCG-Zr ratio, adsorbent dose, time and solution pH, etc. were investigated. Newly developed CCG-Zr accomplished a significantly higher phosphate removal for phosphate (93%) compared with CCG (35%) at a calcinated temperature of 600 °C and CCG-Zr mass ratio of 1:1. For CCG-Zr the maximum phosphate removal rate (93%) was noted at an initial phosphate concentration of 2 mg/L within 20 min. The CCG-Zr displayed a higher phosphate removal rate (85–98%) over a wide range of solution pH (2.5~8.5). The adsorption isotherms fitted better to the Freundlich (R2 = 0.975) than the Langmuir model (R2 = 0.967). The maximum phosphate adsorption capacity of the CCG-Zr was 8.55 mg/g. These results suggested that the CCG-Zr could potentially be applied for the phosphate removal from secondary effluents.

Dibenzothiophene Hydrodesulfurization over P-CoMo on Sol-Gel Alumina Modified by La Addition. Effect of Rare-Earth Content

Alumina-lanthana (La at 1, 3, or 5 wt%) supports were prepared by sol-gel from Al alkoxide sol where La(NO3)3 was added. Annealed (550 °C) xerogels were characterized by N2 physisorption, thermal analysis (TG-DTA), X-ray diffraction (XRD), scanning electron microscopy- energy dispersive spectroscopy (SEM-EDS), CO2-adsorption studied in IR region, Raman and ultraviolet-vis (UV-vis) spectroscopies. The texture of amorphous binary matrices of high La dispersion was adequate to applications in catalysts for middle distillates hydrodesulfurization (HDS). Generally, the amount and strength of surface basic sites increased with La content in solids. Mo (at 2.8 at. nm−2) and Co (at Co/(Co+Mo) = 0.3) were deposited over carriers by one-pot simultaneous impregnation in the presence of PO43− (P2O5/(NiO+MoO3) = 0.2 mass ratio). Calcined (400 °C) Co-Mo-P impregnated precursors had decreased basicity as to that of corresponding carriers, suggesting strong La-deposited species interaction. As La content in carriers increased Mo=O Raman stretching vibrations shifted to lower wave-numbers (949 to 935 cm−1) suggesting octahedral molybdates coordination change to tetrahedral. Although La at the lowest concentration (1 wt%) enhanced dibenzothiophene, HDS (~38% higher as to the Al2O3-supported formulation) desulfurization was significantly diminished at augmented content. Presence of hardly sulfidable tetrahedral Mo originated during impregnation at basic conditions in pores of La-modified carriers seemed to dictate observed behavior. Rare earth content in formulations enhanced selectivity to biphenyl.

Assessment of possible solid-phase phosphate sorbents to mitigate eutrophication: Influence of pH and anoxia

Managing eutrophication remains a challenge to water managers. Currently, the manipulation of biogeochemical processes (i.e., geo-engineering) by using phosphorus-adsorptive techniques has been recognized as an appropriate tool to manage the problem. The first step in finding potential mitigating materials is conducting a sequence of upscaling studies that commence with controlled laboratory experiments. Here, the abilities of 10 possible solid-phase-sorbents (SPS) to adsorb P were examined. Four materials adsorbed P, and two of these materials were modified, i.e., a lanthanum-modified-bentonite (LMB) and an aluminum-modified-zeolite (AMZ), and had the highest adsorption capacities of 11.4 and 8.9mgPg^-1, respectively. Two natural materials, a red soil (RS) and a bauxite (BAU), were less efficient with adsorption capacities of 2.9 and 3.4mgPg^-1, respectively. Elemental composition was not related to P adsorption. Since SPS might be affected by pH and redox status, we also tested these materials at pH values of 6, 7, 8 and 9 and under anoxic condition. All tested materials experienced decreased adsorption capacities under anoxic condition, with maximum adsorptions of 5.3mgPg^-1 for LMB, 5.9mgPg^-1 for AMZ, 0.2mgPg^-1 for RS and 0.2mgPg^-1 for BAU. All materials were able to adsorb P across the range of pH values that were tested. The maximum adsorption capacities of LMB and RS were highest at pH6, AMZ was higher at a pH of 9 and BAU at a pH of 8. Thus, pH influenced P adsorption differently. Given the effects of pH and anoxia, other abiotic variables should also be considered. Considering the criteria that classify a useful SPS (i.e., effective, easy to produce, cheap and safe), only the two modified materials that were tested seem to be suitable for upscaling to enclosure studies with anoxic sediments.

La3+/La(OH)3 loaded magnetic cationic hydrogel composites for phosphate removal: Effect of lanthanum species and mechanistic study

In this study, La³⁺(ion)/La(OH)₃-W/La(OH)₃-EW-loaded magnetic cationic hydrogel (MCH) composites were fabricated in situ and characterized to investigate the effects of lanthanum species on phosphate adsorption. The corresponding maximum P adsorption capacities of MCH-loaded La³⁺(ion) (MCH-La³⁺(ion)), La(OH)₃-W (MCH-La(OH)₃-W), and La(OH)₃-EW (MCH-La(OH)₃-EW) were 70.5 ± 2.67, 69.2 ± 3.5, and 90.2 ± 2.9 mg P/g, respectively. Furthermore, for MCH-La(OH)₃-EW, the P adsorption capacity was maintained relatively stable and high at pH 4.5-11 because of the ligand exchange, electrostatic interactions, and Lewis acid-base interactions. The enhanced adsorption of P was achieved over a wide pH range, as well as in the presence of competing anions (including Cl^-, NO₃^-, SO₄^2-, HCO₃^- and SiO₄^4-). Moreover, the exhausted MCH-La(OH)₃-EW could be easily regenerated by a NaOH-NaCl desorption agent with above 72% adsorption capacity remained during five recycles. The column adsorption capacity of MCH-La(OH)₃-EW reached ∼3500 bed volumes (BV) (∼67.7 mg P/g) as the concentration of P decreased from 5 mg/L to 0.1 mg/L. The ATR-IR, Raman, and XPS deconvolution results revealed that both MCH and lanthanum compounds, including La³⁺(ion), La(OH)₃-W and La(OH)₃-EW, contributed to the phosphate adsorption because of the electrostatic interactions between -N⁺(CH₃)₃ and phosphate, as well as the formation of LaPO₄·xH₂O.

Adsorptive removal of phosphate from water using mesoporous materials: A review

Mesoporous materials have significant potential for use as adsorbents for removal of phosphate from water. The chemical and structural properties of materials greatly affect their capacity and rate in the phosphate adsorption process. This paper reviews recent activities in the development of mesoporous materials as phosphate adsorbents. In particular, it mainly focuses on the synthesis, properties and phosphate removal efficiency of various materials with mesoporosity, including metal-coordinated amino-functionalized silicas, ammonium-functionalized silicas, metal-doped mesoporous silicas, metal oxides, metal sulfate and carbon.

Gadolinium Complex for the Catch and Release of Phosphate from Water

The ability of complexes of hard and labile metal ions with one or more open coordination sites to capture phosphates with high affinity and selectivity directly in water at neutral pH and release them under acidic conditions is evaluated with Gadolinium- 2,2',2''-(((nitrilotris(ethane-2,1-diyl))tris(azanediyl))tris(carbonyl))tris(4-oxo-4H-pyran-3-olate) (Gd-TREN-MAM). This model lanthanide complex has two open coordination sites that, at neutral pH, are filled with water molecules. In water at neutral pH, Gd-TREN-MAM binds phosphate with high affinity (K_a = 1.3 × 10⁴) via the formation of a ternary complex in which one phosphate replaces both inner-sphere water molecules. The formation of this complex is highly pH-dependent; the phosphate is completely released from Gd-TREN-MAM below pH 2. Because the Gd^III ion remains complexed by its ligand, even under strong acidic conditions, Gd-TREN-MAM can be used at least 10 times in a pH-based recycling scheme that enables the catch and release of one phosphate per cycle. Gd-TREN-MAM is highly selective for phosphate over other anions of environmental concerns, including HCO₃^-, HCO₂^-, CH₃CO₂^-, SO₄^2-, NO₃^-, NO₂^-, BrO₃^-, AsO₄^-, F^-, Cl^-, and Br^- and, to a lesser extent, ClO₃^-. The development of such receptors that bind phosphate reversibly in a pH-dependent manner opens the possibility to design catch-and-release systems for the purification of surface waters.

Phosphate adsorption on lanthanum loaded biochar

To attain a low-cost and high-efficient phosphate adsorbent, lanthanum (La) loaded biochar (La-BC) prepared by a chemical precipitation method was developed. La-BC and its pristine biochar (CK-BC) were comparatively characterized using zeta potential, BET surface area, scanning electron microscopy/energy dispersive spectrometer (SEM-EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The adsorption ability and the mechanisms during adsorption process for the La-BC samples were also investigated. La loaded on the surface of biochar can be termed as La-composites (such as LaOOH, LaONO3 and La(OH)3), leading to the decrease of negative charge and surface area of biochar. La-BC exhibited the high adsorption capacity to phosphate compared to CK-BC. Adsorption isotherm and adsorption kinetic studies showed that the Langmuir isotherm and second order model could well describe the adsorption process of La-BC, indicating that the adsorption was dominated by a homogeneous and chemical process. The calculated maximum adsorption capacity was as high as 46.37 mg g(-1) (computed in P). Thermodynamic analysis revealed that the adsorption was spontaneous and endothermic. SEM, XRD, XPS and FT-IR analysis suggested that the multi-adsorption mechanisms including precipitation, ligand exchange and complexation interactions can be evidenced during the phosphate adsorption process by La-composites in La-BC.

A novel Fe–La-doped hierarchical porous silica magnetic adsorbent for phosphate removal

A novel Fe–La modified magnetic hierarchical porous silica was synthesized by an impregnation method to adsorb phosphate in aquatic ecology.

Evaluation of phosphorus adsorption capacity of sesame straw biochar on aqueous solution: influence of activation methods and pyrolysis temperatures

The phosphorus (P) adsorption characteristic of sesame straw biochar prepared with different activation agents and pyrolysis temperatures was evaluated. Between 0.109 and 0.300 mg L(-1) in the form of inorganic phosphate was released from raw sesame straw biochar in the first 1 h. The release of phosphate was significantly enhanced from 62.6 to 168.2 mg g(-1) as the pyrolysis temperature increased. Therefore, sesame straw biochar cannot be used as an adsorbent for P removal without change in the physicochemical characteristics. To increase the P adsorption of biochar in aqueous solution, various activation agents and pyrolysis temperatures were applied. The amount of P adsorbed from aqueous solution by biochar activated using different activation agents appeared in the order ZnCl2 (9.675 mg g(-1)) > MgO (8.669 mg g(-1)) ⋙ 0.1N-HCl > 0.1N-H2SO4 > K2SO4 ≥ KOH ≥ 0.1N-H3PO4, showing ZnCl2 to be the optimum activation agent. Higher P was adsorbed by the biochar activated using ZnCl2 under different pyrolysis temperatures in the order 600 °C > 500 °C > 400 °C > 300 °C. Finally, the amount of adsorbed P by activated biochar at different ratios of biochar to ZnCl2 appeared in the order 1:3 ≒ 1:1 > 3:1. As a result, the optimum ratio of biochar to ZnCl2 and pyrolysis temperature were found to be 1:1 and 600 °C for P adsorption, respectively. The maximum P adsorption capacity by activated biochar using ZnCl2 (15,460 mg kg(-1)) was higher than that of typical biochar, as determined by the Langmuir adsorption isotherm. Therefore, the ZnCl2 activation of sesame straw biochar was suitable for the preparation of activated biochar for P adsorption.

Highly Efficient Phosphate Scavenger Based on Well-Dispersed La(OH)3 Nanorods in Polyacrylonitrile Nanofibers for Nutrient-Starvation Antibacteria

La(OH)3 nanorods immobilized in polyacrylonitrile (PAN) nanofibers (PLNFs) were fabricated for the first time by electrospinning and a subsequent in situ surfactant-free precipitation method and then applied as a highly efficient phosphate scavenger to realize nutrient-starvation antibacteria for drinking water security. The immobilization by PAN nanofibers effectively facilitated the in situ formation of the aeolotropic and well-dispersed La(OH)3 nanostructures and, thus, rendered higher phosphate removal efficiency due to more exposed active sites for binding phosphate. The maximum phosphate capture capacity of La(OH)3 nanorods in PAN nanofibers was around 8 times that of the La(OH)3 nanocrystal fabricated by precipitation without PAN protection. Moreover, remarkably fast adsorption kinetics and high removal rate were observed toward low concentration phosphate due to the high activity of our materials, which can result in a stringent phosphate-deficient condition to kill microorganisms in water effectively. The present material is also capable of preventing sanitized water from recontamination by bacteria and keeping water biologically stable for drinking. Impressively, stabilized by PAN nanofibers, the La(OH)3 nanorods can be easily separated out after reactions and avoid leaking into water. The present development has great potential as a promising antimicrobial solution for practical drinking water security and treatment with a negligible environmental footprint.

Expanded graphite loaded with lanthanum oxide used as a novel adsorbent for phosphate removal from water: performance and mechanism study

A novel adsorbent of expanded graphite (EG) loaded with lanthanum oxide (EG-LaO) was prepared for phosphate removal from water and characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. The effects of impregnation time, La3+ concentration, activation time, and activation temperature on the phosphate removal performance of the adsorbent were studied for optimization of preparation conditions. Isothermal adsorption studies suggested that the Langmuir model fits the experimental data well. Adsorption kinetics investigation showed that the pseudo-second-order model fits the experimental data quite well, indicating that the adsorption process is mainly a process of chemical adsorption, and chloride ions compete to react with the active sites of the adsorbent but do not prevent phosphate from adsorbing onto EG-LaO. The adsorption mechanism studies were performed by a pH dependence study of the adsorption amount. The results demonstrated that the probable mechanisms of phosphate adsorption on EG-LaO were electrostatic and Lewis acid-base interactions in addition to ion exchange.

Fabrication of lanthanum-based phosphate binder using cross-linked alginate as a carrier

Lanthanum carbonate loaded sodium alginate cross-linked beads were fabricated and used for phosphate binding.

Equilibrium and kinetics of phosphorous adsorption onto bone charcoal from aqueous solution

Pyrolysis of fresh sheep bone led to the formation of bone charcoal (BC). The structural characteristics of BC and surface area were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). N2 gas adsorption-desorption was analysed by Brunauer-Emmett-Teller isotherm model. The prepared BC was used as an effective sorbent for the removal of phosphate from aqueous solutions. The effect of major parameters, including initial phosphorous concentration, sorbent dosage, pH and temperature, was investigated in this study. Furthermore, adsorption isotherms and kinetics were evaluated. BC was an effective sorbent in phosphate removal from aqueous solution especially in phosphate concentration between 2 and 100 mg/L. The maximum amount of sorption capacity was 30.21 mg/g, which was obtained with 100 mg/L as the initial phosphate concentration and 0.2 g as the sorbent dosage. Best reported pH in this study is 4; in higher pH, adsorption rate decreased dramatically. By increasing the temperature from 20 to 40 degrees C sorption capacity increased; this phenomenon described that adsorption is endothermic. Equilibrium data were analysed by Langmuir, Freundlich and Temkin isotherms. Pseudo first- and second-order and Elovich models were used to determine the kinetics of adsorption in this study. Collected data highly fitted with Freundlich isotherms and pseudo second-order kinetics. Achieved results have shown well the potentiality for the BC to be utilized as a natural sorbent to remove phosphorous from water and wastewater.

Low-cost and large-scale synthesis of functional porous materials for phosphate removal with high performance

A facile spray drying technique has been developed for large-scale and template-free production of nanoporous silica with controlled morphology, large pore size, and high pore volume, using commercially available fumed silica, Aerosil 200, as a sole precursor. This approach can be applied to the preparation of functional nanoporous materials, in this study, lanthanum oxide functionalised silica microspheres by introducing lanthanum nitrate in situ during the spray drying process and followed by a post-calcination process. The resultant lanthanum functionalised Aerosil microspheres manifest high phosphate adsorption capacity (up to 2.317 mmol g(-1)), fast kinetics, and excellent adsorption performance at a low phosphate concentration (1 mg L(-1)). In virtue of the easy and scalable synthesis method, low cost and high performances of the product, the materials we reported here are promising for water treatment. Our approach may be general and extended to the synthesis of other functional nanoporous materials with versatile applications.

La-EDTA coated Fe3O4 nanomaterial: preparation and application in removal of phosphate from water

La-EDTA-Fe3O4 was prepared by a chemical co-precipitation method. The magnetic composite was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Furthermore, the adsorption properties of La-EDTA-Fe3O4 toward phosphate in water were investigated. The uptake rate of phosphate in water by La-EDTA-Fe3O4 was 3-1000 times than that of EDTA-Fe3O4, and reached 97.8% at 7 hr. The adsorption process agreed well with the Freundlich model and kinetics studies showed that the adsorption of phosphate proceeds according to pseudo second-order adsorption kinetics. The maximum removal rate was achieved at pH 6.0-7.0. The La-EDTA-Fe3O4 had good adsorption properties and could be separated well from aqueous solution by a permanent magnet. Therefore, this nanomaterial has potential application for the removal of phosphate from large water bodies.

Removal of phosphate from water by activated carbon fiber loaded with lanthanum oxide

Phosphate removal from wastewater is very important for the prevention of eutrophication. Adsorption of phosphate from water was investigated using activated carbon fiber loaded with lanthanum oxide (ACF-La) as a novel adsorbent. The effects of variables (La/ACF mass ratio, impregnation time, activation time, and activation temperature) have been studied by the single-factor method. Response surface methodology (RSM), based on three-variable-three-level Box-Behnken design (BBD), was employed to assess the individual and collective effects of the main independent parameters on the phosphate removal. The optimal conditions within the range studied for preparing ACF-La were found as follows: La/ACF mass ratio of 11.78%, activation time of 2.5h and activation temperature at 650°C, respectively. The phosphate removal using the ACF-La prepared under the optimal conditions was up to 97.6% even when the phosphate concentration in water was 30 mgP/L, indicating that ACF-La may be an effective adsorbent. The results from Fourier transform infrared (FT-IR) spectroscopy and change of pH values associated with the adsorption process revealed that the probable mechanism of phosphate ions onto ACF-La was not only ion exchange and coulomb interaction, but also a result of Lewis acid-base interaction due to La-O coordination bonding.

Development of chemically engineered porous metal oxides for phosphate removal

In this study, the application of ordered mesoporous silica (OMS) doped with various metal oxides (Zr, Ti, Fe and Al) were studied for the removal of (ortho) phosphate ions from water by adsorption. The materials were characterized by means of N(2) physisorption (BET), powder X-ray diffraction (PXRD) and transmission electron microscopy (TEM). The doped materials had surface areas between 600 and 700 m(2)g(-1) and exhibited pore sizes of 44-64 Å. Phosphate adsorption was determined by measurement of the aqueous concentration of orthophosphate using ultraviolet-visible (UV-vis) spectroscopy before and after extraction. The effects of different metal oxide loading ratios, initial concentration of phosphate solution, temperature and pH effects on the efficiency of phosphate removal were investigated. The doped mesoporous materials were effective adsorbents of orthophosphate and up to 100% removal was observed under appropriate conditions. 'Back extracting' the phosphate from the doped silica (following water treatment) was also investigated and shown to have little adverse effect on the adsorbent.

On the use of magnetic nano and microparticles for lake restoration

Innovative approaches are of outstanding importance to devise technologies for dealing with eutrophication of inland waters. This study provides a quantitative estimate showing the convenience of using magnetic nano- and micronsized particles as phosphate absorbents and their later removal from solution by high gradient magnetic separation. Two different materials are investigated (iron and magnetite) having a controlled shape and size well in the colloidal domain. Magnetite particles adsorb more phosphate (empirical saturation constant=27.15 mg P g(-1) Fe) than iron particles (empirical saturation constant=18.83 mg P g(-1) Fe) as a consequence of the different particle size (average values for particle diameters of 90.6+/-1.2 and 805+/-10 nm for magnetite and for iron, respectively). A protocol is established for the successful reutilization of these magnetic particles by repeated washing with NaOH and therefore, optimizing the economic cost of this technology. Magnetic particles are also surface treated with amino silane groups (APTS) to counteract magnetic and van der Waals attractive interactions and promote kinetic stability. APTS-coated iron particles experience a notable increase in phosphate maximum adsorption capacity which could be explained by a remarkable increase in electrophoretic mobility. We propose the use of APTS-coated iron particles which are less-expensive and easy to obtain as a promising technique for lake restoration.

Phosphate removal by anion binding on functionalized nanoporous sorbents

Phosphate was captured from aqueous solutions by cationic metal-EDA complexes anchored inside mesoporous silica MCM-41 supports (Cu(II)-EDA-SAMMS and Fe(III)-EDA-SAMMS). Fe-EDA-SAMMS was more effective at capturing phosphate than the Cu-EDA-SAMMS and was further studied for matrix effects (e.g., pH, ionic strength, and competing anions) and sorption performance (e.g., capacity and rate). The adsorption of phosphate was highly pH dependent; it increased with increasing pH from 1.0 to 6.5, and decreased above pH 6.5. The adsorption was affected by high ionic strength (0.1 M of NaCl). In the presence of 1000-fold molar excess of chloride and nitrate anions, phosphate removal by Fe-EDA-SAMMS was not affected. Slight, moderate and large impacts were seen with bicarbonate, sulfate, and citrate anions, respectively. The phosphate adsorption data on Fe-EDA-SAMMS agreed well with the Langmuir model with the estimated maximum capacity of 43.3 mg/g. The material displayed rapid sorption rate (99% of phosphate removal within 1 min) and lowering the phosphate content to approximately 10 microg/L of phosphorus, which is lower than the EPA's established freshwater contaminant level for phosphorus (20 microg/L).