Formation of zinc oxide nanoparticles of different shapes in water-in-oil microemulsion

ZnO nanostructured matrix as nexus catalysts for the removal of emerging pollutants

Water pollution stands as a pressing global environmental concern, elevating the significance of innovative, dependable, and sustainable solutions. This study represents an extensive review of the use of photocatalytic zinc oxide nanoparticles (ZnO NPs) for the removal of emerging pollutants from water and wastewater. The study examines ZnO NPs' different preparation methods, including physical, chemical, and green synthesis, and emphasizes on advantages, disadvantages, preparation factors, and investigation methods for the structural and morphological properties. ZnO NPs demonstrate remarkable properties as photocatalysts; however, their small dimensions pose an issue, leading to potential post-use environmental losses. A strategy to overcome this challenge is scaling up ZnO NP matrices for enhanced stability and efficiency. The paper introduces novel ZnO NP composites, by incorporating supports like carbon and clay that serve as photocatalysts in the removal of emerging pollutants from water and wastewater. In essence, this research underscores the urgency of finding innovative, efficient, and eco-friendly solutions for the removal of emerging pollutants from wastewater and highlights the high removal efficiencies obtained when using ZnO NPs obtained from green synthesis as a photocatalyst. Future research should be developed on the cost-benefit analysis regarding the preparation methods, treatment processes, and value-added product regeneration efficiency.

New Eco-Friendly and Low-Energy Synthesis to Produce ZnO Nanoparticles for Real-World Scale Applications

This paper presents an original and sustainable method for producing ZnO nanoparticles (NPs) in response to global challenges (low energy requirements, low environmental impact, short production times, and high production yield). The method is based on an ion exchange process between an anionic resin and an aqueous ZnCl2 solution; it operates in one step at room temperature/ambient pressure without the need for complex apparatus or purification steps. From the kinetics, we observed the formation of pure simonkolleite, a zinc-layered hydroxide salt (Zn5(OH)8Cl2·H2O), after only 5 min of reaction. This compound, used elsewhere as a ZnO precursor after calcination at high temperatures, here decomposes at room temperature into ZnO, allowing extraordinary savings of time and energy. Finally, in only 90 min, pure and crystalline ZnO NPs are obtained, with a production yield > 99%. Several types of aggregates resulting from the self-assembly of small hexagonal platelets (solid or hollow in shape) were observed. Using our revolutionary method, we produced almost 10 kg of ZnO NPs per week without any toxic waste, significantly reducing energy consumption; this method allows transferring the use of these unique NPs from the laboratory environment to the real world.

Synthesis of Planar-Type ZnO Powder in Non-Nano Scale Dimension and Its Application in Ultraviolet Protection Cosmetics

ZnO is one of the most widely used inorganic sunscreens, owing to its fine particle size and UV light shielding capability. However, powders at nanosizes can be toxic and cause adverse effects. The development of non-nanosized particles has been slow. The present work investigated synthesis methods of non-nanosized ZnO particles for ultraviolet protection application. By altering the starting material, KOH concentration, and input speed, the ZnO particles can be obtained in different forms, including needle type, planar type, and vertical wall type. Cosmetic samples were made by mixing different ratios of synthesized powders. The physical properties and the UV blockage efficacy of different samples were evaluated using scanning electron microscopy (SEM), X-ray diffraction (XRD), particle size analyzer (PSA), and ultraviolet/visible (UV/Vis) spectrometer. The samples with 1:1 ratio of needle-type ZnO and vertical wall-type ZnO exhibited superior light blocking effect owing to improved dispersibility and prevention of particle agglomeration. The 1:1 mixed sample also complied with the European nanomaterials regulation due to the absence of nanosized particles. With superior UV protection in the UVA and UVB regions, the 1:1 mixed powder showed potential to be used as a main ingredient in UV protection cosmetics.

Shape-controlled synthesis of zinc nanostructures mediating macromolecules for biomedical applications

Zinc nanostructures (ZnONSs) have attracted much attention due to their morphological, physicochemical, and electrical properties, which were entailed for various biomedical applications such as cancer and diabetes treatment, anti-inflammatory activity, drug delivery. ZnONS play an important role in inducing cellular apoptosis, triggering excess reactive oxygen species (ROS) production, and releasing zinc ions due to their inherent nature and specific shape. Therefore, several new synthetic organometallic method has been developed to prepare ZnO crystalline nanostructures with controlled size and shape. Zinc oxide nanostructures' crystal size and shape can be controlled by simply changing the physical synthesis condition such as microwave irradiation time, reaction temperature, and TEA concentration at reflux. Physicochemical properties which are determined by the shape and size of ZnO nanostructures, directly affect their biological applications. These nanostructures can decompose the cell membrane and accumulate in the cytoplasm, which leads to apoptosis or cell death. In this study, we reviewed the various synthesis methods which affect the nano shapes of zinc particles, and physicochemical properties of zinc nanostructures that determined the shape of zinc nanomaterials. Also, we mentioned some macromolecules that controlled their physicochemical properties in a green and biological approaches. In addition, we present the recent progress of ZnONSs in the biomedical fields, which will help centralize biomedical fields and assist their future research development.

Anisotropic ZnO nanostructures and their nanocomposites as an advanced platform for photocatalytic remediation

In pursuit of advanced heterogeneous photocatalysts, ZnO has emerged as a promising option for solar-driven heterogeneous photocatalyst with many advantageous properties (e.g., optical band structure and electronic properties). However, as the efficacy of such system can also be limited by a number of demerits (e.g., fast recombination of charge carriers and limited photon absorption), considerable efforts are needed for its effective and practical scale-up. This article provides a detailed literature review of the synthesis and modification of ZnO nanostructures with tuned band structures and controllable morphologies for solar light harvesting. The potential of anisotropic ZnO nanostructures is also discussed with respect to the photocatalytic degradation of organic/inorganic water pollutants. Further, the role of various metal dopants is discussed for the enhancement of photocatalytic activity along with evaluation of their photocatalytic performances under UV-visible or solar irradiation. Finally, our discussions are expanded to describe the prospects of developed ZnO nano-photocatalysts for real-world applications with respect to light-harvesting efficiency and mechanical stability.

ZnO Nano-Rod Arrays Synthesized with Exposed {0001} Facets and the Investigation of Photocatalytic Activity

Zinc oxide (ZnO) possesses superior chemical and physical properties so that it can occupy an essential position in the application of nanostructures. In this paper, ZnO nano-rod arrays were synthesized by a simple one-step hydrothermal approach with the assistance of cetyl trimethyl ammonium bromide (CTAB). Exposure of the {0001} facets could be controlled by adjusting the amount of CTAB and the maximum exposure of the {0001} facets of ZnO nanorods is obtained at 1.2 g of CTAB. The photocurrent, EIS, and PL measurements support the facile charge transfer with minimum recombination of the photogenerated excitons of the ZnO nano-rod arrays obtained at 1.2 g of CTAB. Consequently, the obtained ZnO nano-rod arrays at the optimal CTAB of 1.2 g exhibit an excellent photocatalytic degradation rate of 99.7% for rhodamine B (RhB), while the degradation rate of RhB by the ZnO obtained without CTAB is only 35%.

Analog Memristive Characteristics of Square Shaped Lanthanum Oxide Nanoplates Layered Device

Square-shaped or rectangular nanoparticles (NPs) of lanthanum oxide (LaO_x) were synthesized and layered by convective self-assembly to demonstrate an analog memristive device in this study. Along with non-volatile analog memory effect, selection diode property could be co-existent without any implementation of heterogeneous multiple stacks with ~1 μm thick LaO_x NPs layer. Current–voltage (I–V) behavior of the LaO_x NPs resistive switching (RS) device has shown an evolved current level with memristive behavior and additional rectification functionality with threshold voltage. The concurrent memristor and diode type selector characteristics were examined with electrical stimuli or spikes for the duration of 10–50 ms pulse biases. The pulsed spike increased current levels at a read voltage of +0.2 V sequentially along with ±7 V biases, which have emulated neuromorphic operation of long-term potentiation (LTP). This study can open a new application of rare-earth LaO_x NPs as a component of neuromorphic synaptic device.

A Facile Approach for the Preparation of Nano-size Zinc Oxide in Water/Glycerol with Extremely Concentrated Zinc Sources

A facile process to prepare zinc oxide (ZnO) nanoparticles from an aqueous zinc chloride (ZnCl₂) solution and an aqueous hydroxide solution under a glycerol stabilizer at room temperature was developed. ZnCl₂ aqueous solutions as concentrated as 65-80 wt% were used as the concentrated zinc source. The concentration of ZnCl₂ solutions and the molar ratio of glycerol to Zn²⁺ had obvious effects on the sizes and shapes of the ZnO nanoparticles. The shape of ZnO nanoparticles changed from rods approximately 50-120 nm long and 30-70 nm in diameter to globular with diameters of approximately 20 nm with the increasing of the concentration of the ZnCl₂ solution and the mole ratio of glycerol to Zn²⁺. Glycerol, as a stabilizer, played an important role in the formation of ZnO nanostructures at room temperature, even for a highly concentrated zinc source.

Organozinc Precursor-Derived Crystalline ZnO Nanoparticles: Synthesis, Characterization and Their Spectroscopic Properties

Crystalline ZnO_-ROH and ZnO_-OR (R = Me, Et, iPr, nBu) nanoparticles (NPs) have been successfully synthesized by the thermal decomposition of in-situ-formed organozinc complexes Zn(OR)₂ deriving from the reaction of Zn[N(SiMe₃)₂]₂ with ROH and of the freshly prepared Zn(OR)₂ under an identical condition, respectively. With increasing carbon chain length of alkyl alcohol, the thermal decomposition temperature and dispersibility of in-situ-formed intermediate zinc alkoxides in oleylamine markedly influenced the particle sizes of ZnO_-ROH and its shape (sphere, plate-like aggregations), while a strong diffraction peak-broadening effect is observed with decreasing particle size. For ZnO_-OR NPs, different particle sizes and various morphologies (hollow sphere or cuboid-like rod, solid sphere) are also observed. As a comparison, the calcination of the fresh-prepared Zn(OR)₂ generated ZnO_-R NPs possessing the particle sizes of 5.4~34.1 nm. All crystalline ZnO nanoparticles are characterized using X-ray diffraction analysis, electron microscopy and solid-state ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy. The size effect caused by confinement of electrons’ movement and the defect centres caused by unpaired electrons on oxygen vacancies or ionized impurity heteroatoms in the crystal lattices are monitored by UV-visible spectroscopy, electron paramagnetic resonance (EPR) and photoluminescent (PL) spectroscopy, respectively. Based on the types of defects determined by EPR signals and correspondingly defect-induced probably appeared PL peak position compared to actual obtained PL spectra, we find that it is difficult to establish a direct relationship between defect types and PL peak position, revealing the complication of the formation of defect types and photoluminescence properties.

In situ growth of ZnO nanoparticles in precursor-insensitive water-in-oil microemulsion as soft nanoreactors

Zinc oxide (ZnO) nanostructures of uniform shapes and sizes (spherical, needle-like, and acicular) were directly synthesized using a relatively precursor-insensitive water-in-n-heptane microemulsion system stabilized by a mixture of cationic and non-ionic surfactants. With this colloidal system, the synthesized ZnO possesses the highest reported surface area (76 m(2) g(-1)) among the published reports utilizing other microemulsion systems. Such precursor insensitivity allowed studying the effect of Zn precursor:precipitating agent molar ratio (as high as 1:8) on the particle size, specific surface area, porosity, and morphology of the synthesized nanoparticles. The interaction of the cationic surfactant head groups and their Br(-) counter ions with Zn(2+) and OH(-) ions is believed to play a major role in controlling the ZnO characteristics. Due to such interactions, it is believed that the nucleation processes are retarded while the growth is more dominating if compared with other microemulsion systems.

Hydrothermal effect on synthesis, characterization and catalytic properties of calcium methoxide for biodiesel production from crude Jatropha curcas

Hydrothermal synthesis is a well-suited approach for preparing bulk metal catalysts with high purity as it is cost-effective and easy to control in terms of temperature and time.

A facile thermal-treatment route to synthesize ZnO nanosheets and effect of calcination temperature

A facile thermal-treatment route was successfully used to synthesize ZnO nanosheets. Morphological, structural, and optical properties of obtained nanoparticles at different calcination temperatures were studied using various techniques. The FTIR, XRD, EDX, SEM and TEM images confirmed the formation of ZnO nanosheets through calcination in the temperature between 500 to 650 °C. The SEM images showed a morphological structure of ZnO nanosheets, which inclined to crumble at higher calcination temperatures. The XRD and FTIR spectra revealed that the samples were amorphous at 30 °C but transformed into a crystalline structure during calcination process. The average particle size and degree of crystallinity increased with increasing calcination temperature. The estimated average particle sizes from TEM images were about 23 and 38 nm for the lowest and highest calcination temperature i.e. 500 and 650 °C, respectively. The optical properties were determined by UV-Vis reflection spectrophotometer and showed a decrease in the band gap with increasing calcination temperature.

An approach towards the synthesis and characterization of ZnO@Ag core@shell nanoparticles in water-in-oil microemulsion

Water-in-oil microemulsions have been found to be good templates for synthesis of ZnO and ZnO@Ag nanoparticles and offered themselves as ideal ‘nanoreactors’ for uniform fabrication of core@shell nanoparticles.

Microwave-Assisted Combustion Synthesis of ZnO Nanoparticles

A new and simple method was applied for the synthesis of ZnO nanoparticles with an average size of 20 nm. In this microwave-assisted combustion method, glycine as a fuel and zinc nitrate as precursor were used. The final product was obtained very fast with high yield and purity. The synthesized nanoscale ZnO was characterized by X-ray Diffraction (XRD), Energy Dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FT-IR). The size and morphology of the ZnO nanoparticles have been determined by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) techniques. This is a simple and fast method for the preparation of ZnO nanoparticles with no need for expensive materials or complicated treatments.