Amphiphilic PMMA/PEI core–shell nanoparticles as polymeric adsorbents to remove heavy metal pollutants

The recent development of inverse vulcanized polysulfide as an alternative adsorbent for heavy metal removal in wastewater

Inverse vulcanized polysulfides have been used as low-cost and effective adsorbents to remediate heavy metals in wastewater. Inverse vulcanization introduces sustainable polysulfide synthesis by solving the rapid desulfurization problem of unstable polysulfides, and provides superior performance compared to conventional commercial adsorbents. The review discussed the brief applications of the inverse vulcanized polysulfides to remove heavy metal wastewater and emphasized the modified synthesis processes for enhanced uptake ratios. The characteristics of polysulfide adsorbents, which play a vital role during the removal process are highlighted with a proper discussion of the interaction between metal ions and polysulfides. The review paper concludes with remarks on the future outlook of these low-cost adsorbents with high selectivity to heavy metals. These polysulfide adsorbents can be prepared using a wide variety of crosslinker monomers including organic hydrocarbons, cooking oils, and agro-based waste materials. They have shown good surface area and excellent metal-binding capabilities compared to the commercially available adsorbents. Proper postmodification processes have enabled the benefits of repetitive uses of the polysulfide adsorbents. The improved surface area obtained by appropriate choice of crosslinkers, modified synthesis techniques, and regeneration through post-modification has made inverse vulcanized polysulfides capable of removing.

Graphene Oxide/Polyethylenimine Aerogels for the Removal of Hg(II) from Water

This article reports the synthesis of an aerogel involving reduced graphene oxide (rGO) and polyethylenimine (PEI), and describes its potential application as an effective sorbent to treat Hg(II) contaminated water. The rGO/PEI sorbent was synthetized using a supercritical CO₂ method. N₂ physisorption, electron microscopy, and elemental mapping were applied to visualize the meso/macroporous morphology formed by the supercritical drying. The advantages of the synthetized materials are highlighted with respect to the larger exposed GO surface for the PEI grafting of aerogels vs. cryogels, homogeneous distribution of the nitrogenated amino groups in the former and, finally, high Hg(II) sorption capacities. Sorption tests were performed starting from water solutions involving traces of Hg(II). Even though, the designed sorbent was able to eliminate almost all of the metal from the water phase, attaining in very short periods of time residual Hg(II) values as low as 3.5 µg L⁻¹, which is close to the legal limits of drinking water of 1–2 µg L⁻¹. rGO/PEI exhibited a remarkably high value for the maximum sorption capacity of Hg(II), in the order of 219 mg g⁻¹. All of these factors indicate that the designed rGO/PEI aerogel can be considered as a promising candidate to treat Hg(II) contaminated wastewater.

Fabrication of Cross-Linked PMMA/SnO2 Nanocomposites for Highly Efficient Removal of Chromium (III) from Wastewater

In recent times, developments in polymer application properties have required the design of different polymer structures more than ever. Cross-linked polymers (CPs) could be considered a good candidate material for potential applications when used in conjunction with nanoparticles. Cross-linked polymethyl methacrylate nanocomposites are considered to be one of the most commonly polymeric adsorbents due to their varied and simple modification methods. A new class of C-PMMA/SnO_2(a–d) nanocomposites have been fabricated as surface-selective adsorbents of Cr (III) with a good yield and different loading of SnO₂ nanoparticles. The morphology, molecular structures, and thermal stability of the new cross-linked polymers were examined using a Scanning electron microscope (SEM), the Fourier Transform Infrared method (FTIR), X-ray diffraction (XRD), and Thermogravimetric Analysis (TGA). The adsorption study of C-PMMA/SnO₂ was investigated, and an efficient level of adsorption for Cr (III) cations was detected. To evaluate the potential for the new polymers to be used as adsorbents against Cr (III) ions, the contact time, the initial concentration of Cr (III), and the effects of pH were studied. The introduction of SnO₂ into the polymer network enhanced the efficiency of the adsorption of heavy metals. The C-PMMA/SnO₂ is highly efficient at removing Cr (III) ions in wastewater samples at pH 6 for one hour. The adsorption study demonstrated that the adsorption capacity of C-PMMA/SnO₂c for Cr (III) was 1.76 mg /g, and its adsorption isotherm agreed with the Langmuir adsorption model.

Methacrylate-Based Polymeric Sorbents for Recovery of Metals from Aqueous Solutions

The industrialization and urbanization expansion have increased the demand for precious and rare earth elements (REEs). In addition, environmental concerns regarding the toxic effects of heavy metals on living organisms imposed an urgent need for efficient methods for their removal from wastewaters and aqueous solutions. The most efficient technique for metal ions removal from wastewaters is adsorption due to its reversibility and high efficiency. Numerous adsorbents were mentioned as possible metal ions adsorbents in the literature. Chelating polymer ligands (CPLs) with adaptable surface chemistry, high affinity towards targeted metal ions, high capacity, fast kinetics, chemically stable, and reusable are especially attractive. This review is focused on methacrylate-based magnetic and non-magnetic porous sorbents. Special attention was devoted to amino-modified glycidyl methacrylate (GMA) copolymers. Main adsorption parameters, kinetic models, adsorption isotherms, thermodynamics of the adsorption process, as well as regeneration of the polymeric sorbents were discussed.

Resource recovery from landfill leachate: An experimental investigation and perspectives

This work investigates the performances of coconut shell waste-based activated carbon (CSWAC) adsorption in batch studies for removal of ammoniacal nitrogen (NH₃-N) and refractory pollutants (as indicated by decreasing COD concentration) from landfill leachate. To valorize unused resources, coconut shell, recovered and recycled from agricultural waste, was converted into activated carbon, which can be used for leachate treatment. The ozonation of the CSWAC was conducted to enhance its removal performance for target pollutants. The adsorption mechanisms of refractory pollutants by the adsorbent are proposed. Perspectives on nutrient recovery technologies from landfill leachate from the view-points of downstream processing are presented. Their removal efficiencies for both recalcitrant compounds and ammoniacal nitrogen were compared to those of other techniques reported in previous work. It is found that the ozonated CSWAC substantially removed COD (i.e. 76%) as well as NH₃-N (i.e. 75%), as compared to the CSWAC without pretreatment (i.e. COD: 44%; NH₃-N: 51%) with NH₃-N and COD concentrations of 2750 and 8500 mg/L, respectively. This reveals the need of ozonation for the adsorbent to improve its performance for the removal of COD and NH₃-N at optimized reactions: 30 g/L of CSWAC, pH 8, 200 rpm of shaking speed and 20 min of reaction time. Nevertheless, treatment of the leachate samples using the ozonated CSWAC alone was still unable to result in treated effluents that could meet the COD and NH₃-N discharge standards below 200 and 5 mg/L, respectively, set by legislative requirements. This reveals that another treatment is necessary to be undertaken to comply with the requirement of their effluent limit.

Resource recovery toward sustainability through nutrient removal from landfill leachate

This study investigated the feasibility of integrated ammonium stripping and/or coconut shell waste-based activated carbon (CSWAC) adsorption in treating leachate samples. To valorize unused biomass for water treatment application, the adsorbent originated from coconut shell waste. To enhance its performance for target pollutants, the adsorbent was pretreated with ozone and NaOH. The effects of pH, temperature, and airflow rate on the removal of ammoniacal nitrogen (NH₃-N) and refractory pollutants were studied during stripping alone. The removal performances of refractory compounds in this study were compared to those of other treatments previously reported. To contribute new knowledge to the field of study, perspectives on nutrients removal and recovery like phosphorus and nitrogen are presented. It was found that the ammonium stripping and adsorption treatment using the ozonated CSWAC attained an almost complete removal (99%) of NH₃-N and 90% of COD with initial NH₃-N and COD concentrations of 2500 mg/L and 20,000 mg/L, respectively, at optimized conditions. With the COD of treated effluents higher than 200 mg/L, the combined treatments were not satisfactory enough to remove target refractory compounds. Therefore, further biological processes are required to complete their biodegradation to meet the effluent limit set by environmental legislation. As this work has contributed to resource recovery as the driving force of landfill management, it is important to note the investment and operational expenses, engineering applicability of the technologies, and their environmental concerns and benefits. If properly managed, nutrient recovery from waste streams offers environmental and socio-economic benefits that would improve public health and create jobs for the local community.

Application of Core/Shell Nanoparticles in Smart Farming: A Paradigm Shift for Making the Agriculture Sector More Sustainable

Modern agriculture has entered an era of technological plateau where intervention of smarter technology like nanotechnology is imminently required for making this sector economically and environmentally sustainable. Throughout the world, researchers are trying to exploit the novel properties of several nanomaterials to make agricultural practices more efficient. Core/shell nanoparticles (CSNs) have attracted much attention because of their multiple attractive novel features like high catalytic, optical, and electronic properties for which they are being widely used in sensing, imaging, and medical applications. Though it also has the promise to solve a number of issues related to agriculture, its full potential still remains mostly unexplored. This review provides a panoramic view on application of CSNs in solving several problems related to crop production and precision farming practices where the wastage of resources can be minimized. This review also summarizes different classes of CSNs and their synthesis techniques. It emphasizes and analyzes the probable potential applications of CSNs in the field of crop improvement and crop protection, detection of plant diseases and agrochemical residues, and augmentation of chloroplast mediated photosynthesis. In a nutshell, there is enormous scope to formulate and design CSN-based smart tools for applications in agriculture, making this sector more sustainable.

Synthesis and characterization of poly(N-isopropylmethacrylamide-acrylic acid) smart polymer microgels for adsorptive extraction of copper(II) and cobalt(II) from aqueous medium: kinetic and thermodynamic aspects

Extraction of toxic heavy metal ions from aqueous medium using poly(N-isopropylmethacrylamide-acrylic acid) (P(NiPmA-Ac)) microgels as adsorbent has been investigated in present study. P(NiPmA-Ac) microgel particles were prepared by free radical precipitation polymerization in aqueous medium. Morphology and size of the prepared microgel particles was investigated by transmission electron microscopy (TEM). The Fourier transform infrared (FT-IR) analysis of pure and metal ion-loaded microgel particles was performed to confirm the presence of various functionalities of microgel particles and their interaction with metal ions extracted from aqueous medium. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used to investigate the thermal stability and thermal behavior of pure and metal ion-loaded microgel particles. Contents of metal ions loaded into microgel particles were determined by TGA analysis. It was observed that P(NiPmA-Ac) particles have a potential to extract Cu²⁺ and Co²⁺ ions from aqueous medium. The Freundlich adsorption isotherm model best interprets the adsorption process as compared with the Langmuir model. Value of R² according to the Freundlich adsorption isotherm was found to be 0.994 and 0.993 for Cu²⁺ and Co²⁺ ions, respectively. Adsorption process was followed by pseudo second order kinetics for Cu²⁺ and Co²⁺ ions with R² values of 0.999 for both metal ions. Thermodynamic study showed that adsorption process was spontaneous, feasible, and endothermic in nature. Entropy was decreased at adsorbate-adsorbent interface during adsorption process. Adsorbent was recycled and reused for removal of Cu²⁺ ions, and adsorption efficiency was found to be maintained up to three cycles. Microgel particles also have ability to extract Cu²⁺ ions efficiently from electroplating wastewater. Graphical abstract.

Preparation of a novel polyfunctional and high adsorption capacity adsorbent by laccase-catalyzed self-polymerization of GAL and cross-linking with PEI

A novel polyfunctional and high adsorption capacity adsorbent was prepared by laccase-catalyzed self-polymerization of GAL and cross-linking with PEI.

Microgels as efficient adsorbents for the removal of pollutants from aqueous medium

Due to their responsive behavior, high stability, and reusability, microgels have gained importance as adsorbents for the removal of aqueous pollutants such as heavy metals, nitroarenes, organic matter, and toxic dyes. However, there are few challenges that need to be addressed to make microgels as potential adsorbents for the removal of aqueous pollutants. This review article encircles the recent developments in the field of microgel usage as adsorbents for the extraction of aqueous pollutants. Many factors that influence the adsorption of pollutants such as pH, temperature of the medium, agitation time, pollutant concentration, microgel dose, and feed contents of microgels have been discussed in detail. Different adsorption isotherms as well as the kinetic and thermodynamic aspects of the adsorption process have also been enlightened to interpret the insight of the adsorption process. Microgel recovery from the reaction mixture as well as reusability is discussed from the financial point of view. The biodegradability of microgels induced due to the incorporation of specific biomacromolecules is also discussed.

Polymer-based nanocomposites for heavy metal ions removal from aqueous solution: a review

A review of versatile polymer-based composites containing different functional organic and/or inorganic counterparts for the removal of hazardous metal ions from wastewater solutions.

Synthesis of monodisperse core shell PVA@P(AMPS-co-NIPAm) nanogels structured for pre-concentration of Fe(III) ions

Core shell-structured poly(vinyl alcohol) @ poly(2-acrylamido-2-methyl-1-propane-sulfonic acid-co-N-isopropylacrylamide) PVA@P(AMPS-co-NIPAm) spheres are synthesized. The well-defined PVA@P(AMPS-co-NIPAm) core shell nanogels with diameter nearly 30 nm enriches Fe(III), and the nanogels are characterized by FT-IR, TEM, SEM and X-ray diffraction (XRD). The many factors affecting adsorption were successfully investigated. The maximum capacity of Fe(III) ions was 320 (mg/g) for PVA@P(90AMPS-co-10NIPAm) (wt.: wt%). The equilibrium data matching well with the Langmuir model and the pseudo-second-order form described the adsorption process better than the pseudo-first-order model. Findings of the present study highlight using a simple synthesis of PVA@P(AMPS-co-NIPAm) nanogels as superior and recyclable nanoadsorbents.

Engineering of Superparamagnetic Core-Shell Iron Oxide/N-Chloramine Nanoparticles for Water Purification

In this study, we describe the synthesis and characterization of superparamagnetic core-shell iron oxide (IO)/N-halamine antibacterial nanoparticles (NPs). For this purpose, superparamagnetic IO core NPs were coated with cross-linked polymethacrylamide (PMAA) by surfactant-free dispersion copolymerization of methacrylamide and N,N-methylenebis(acrylamide) in an aqueous continuous phase. The effect of the polymerization process on the chemical composition, size, shape, crystallinity, and magnetic properties of the IO/PMAA NPs was elucidated. Conversion of the core-shell IO/PMAA NPs into their N-halamine form, IO/PMAA-Cl, was accomplished using a chlorination reaction with sodium hypochlorite. The influence of chlorination on the shape, crystallinity, and magnetic properties of the IO/PMAA NPs was studied. The IO/PMAA-Cl NPs demonstrated excellent antibacterial activity against Gram-negative and Gram-positive bacteria. Finally, the chlorination recharging capabilities of the NPs and their potential for use in the purification of water containing bacteria were demonstrated with magnetic columns packed with the IO/PMAA-Cl NPs.

The role of roots in the accumulation and removal of cadmium by the aquatic plant Hydrilla verticillata

Aquatic macrophytes can absorb heavy metals either from sediments via the root system, from the water phase by leaves, or from both sources. In this study, cadmium accumulation and distribution in the aquatic plant Hydrilla verticillata were investigated, with a focus on the role of roots. Results showed that leaves of H. verticillata had a higher Cd concentration than roots when intact plants were grown in sediments and solutions containing Cd. Cadmium can significantly decrease the leaf chlorophyll content, and the leaves of intact plants with roots had lower chlorophyll contents than the leaves of detached ones without roots due to the transfer effect of roots. The majority of the Cd accumulated in leaves of H. verticillata was bound to the cell walls. When roots were submerged in a solution containing Cd, with shoots in a control solution without Cd, the Cd concentrations in leaves were considerably lower than in roots. In contrast, Cd was almost undetectable in roots when the shoots were submerged in a solution containing Cd, with roots in the control solution. Compared to the leaves and stems of detached shoots without roots, the concentrations of Cd were much higher in the leaves and stems of intact plants with roots. It is suggested that the roots of intact plants absorb Cd and transfer it to leaves and that more Cd is removed from the solution by intact plants.

Surfactin-functionalized poly(methyl methacrylate) as an eco-friendly nano-adsorbent: from size-controlled scalable fabrication to adsorptive removal of inorganic and organic pollutants

Green synthesis of poly(methyl methacrylate) nanoparticles functionalized with the biosurfactant surfactin for adsorptive and reusable removal of toxic metals and organic compounds.

Highly stable and covalently functionalized magnetic nanoparticles by polyethyleneimine for Cr(vi) adsorption in aqueous solution

Covalently functionalized magnetic nanocomposite by polyethyleneimine (PEI) acted as superior adsorbent for removal of Cr(vi) form water.

Polyethyleneimine for copper absorption II: kinetics, selectivity and efficiency from seawater

Nano-thin coatings of glutaraldehyde cross-linked polyethyleneimine effectively and selectively accumulated copper from natural seawater.

Synthesis and investigation of the imprinting efficiency of ion imprinted nanoparticles for recognizing copper

The component ratio of template ions and the crosslinking agent determine the morphology and imprinting efficiency of IIPs.

Visible light-induced surfactant-free emulsion polymerization using camphorquinone/tertiary amine as the initiating system for the synthesis of amine-functionalized colloidal nanoparticles

A visible light-induced surfactant-free emulsion polymerization (SFEP) was developed as an alternative pathway for the preparation of amine-functionalized nanoparticles by using the photo-initiating system consisting of camphorquinone coupled with tertiary amine (CQ/3°-amine). Water-soluble macromolecules containing 3°-amines were used as the sources of 3°-amine species, which not only function with CQ to generate initiating free radicals, but also provide colloidal stabilization to the resulting colloidal products. The prepared nanoparticles showed uniformed size distribution and good colloidal stability with positively charged surface. For SFEP induced by CQ/polyethyleneimine (PEI) photo-redox couple, the polymerization of methyl methacrylate (MMA) was affected by both light intensity and initiator concentration. In addition, to obtain higher solid content products, the weight ratio of PEI:MMA=1:4 was employed. Finally, an opportunity for immobilizing various amine containing polymers by our photo-induced SFEP was evaluated. The achievement of this SFEP also depended on 3°-amine content of the macromolecules used.

Amino-functionalized core-shell magnetic mesoporous composite microspheres for Pb(II) and Cd(II) removal

Amino-functionalized Fe3O4@mesoporous SiO2 core-shell composite microspheres NH2-MS in created in multiple synthesis steps have been investigated for Pb(II) and Cd(II) adsorption. The microspheres were characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), N2 adsorption-desorption, zeta potential measurements and vibrating sample magnetometer. Batch adsorption tests indicated that NH2-MS exhibited higher adsorption affinity toward Pb(II) and Cd(II) than MS did. The Langmuir model could fit the adsorption isotherm very well with maximum adsorption capacity of 128.21 and 51.81 mg/g for Pb(II) and Cd(II), respectively, implying that adsorption processes involved monolayer adsorption. Pb(II) and Cd(II) adsorption could be well described by the pseudo second-order kinetics model, and was found to be strongly dependent on pH and humic acid. The Pb(II)- and Cd(II)-loaded microspheres were effectively desorbed using 0.01 mol/L HCl or EDTA solution. NH2-MS have promise for use as adsorbents in the removal of Pb(II) and Cd(II) in wastewater treatment processes.

Complex formation of d-metal ions at the interface of Tb(III)-doped silica nanoparticles as a basis of substrate-responsive Tb(III)-centered luminescence

The complex formation of d-metal ions at the interface of Tb(III)-doped silica nanoparticles modified by amino groups is introduced as a route to sensing d-metal ions and some organic molecules. Diverse modes of surface modification (covalent and noncovalent) are used to fix amino groups onto the silica surface. The interfacial binding of d-metal ions and complexes is the reason for the Tb(III)-centered luminescence quenching. The regularities and mechanisms of quenching are estimated for the series of d-metal ions and their complexes with chelating ligands. The obtained results reveal the interfacial binding of Cu(II) ions as the basis of their quantitative determination in the concentration range 0.1-2.5 μM by means of steady-state and time-resolved fluorescence measurements. The variation of chelating ligands results in a significant effect on the quenching regularities due to diverse binding modes (inner or outer sphere) between amino groups at the interface of nanoparticles and Fe(III) ions. The applicability of the steady-state and time-resolved fluorescence measurements to sense both Fe(III) ions and catechols in aqueous solution by means of Tb(III)-doped silica nanoparticles is also introduced.