Selective degradation of ciprofloxacin with modified NaCl/TiO2 photocatalyst by surface molecular imprinted technology

Effective inhibition of chloride ion interference in photocatalytic process by negatively charged molecularly imprinted photocatalyst: Behavior and mechanism

The ubiquitous chloride ions (Cl-) in water seriously interfere with pollutant oxidation and inevitably generate undesirable chlorinated byproducts. In this study, we report for the first time that a negatively charged molecularly imprinted photocatalyst (MIP) can effectively inhibit Cl- interference and suppress the production of chlorination byproducts (the yield of chloroacetic acid was only 16 % of the bare photocatalyst system) while ensuring efficient degradation of target pollutants, thereby greatly improving the safety of the pollutant degradation process. Taking antibiotics as target pollutant, we investigated the mechanism of action of MIP by comparing the antibiotic degradation pathways, fate of photogenerated active species and production of reactive chlorine species (RCS) in the MIP and bare photocatalyst system. The mechanism by which MIP inhibits Cl- interference was mainly based on a synergy between electrostatic repulsion and steric hindrance induced by the specific capture of antibiotics in imprinted cavity, which effectively suppressed the production of RCS and hindered the participation of RCS in antibiotics degradation. In addition, MIP showed good compatibility with common cations, anions and organic matter, and performed well within a broad pH range in various water environments. Thus, the negatively charged MIP provides a feasible approach for the safe and efficient removal of pollutants in Cl- containing water.

High Photocatalytic Activity of g-C3N4/La-N-TiO2 Composite with Nanoscale Heterojunctions for Degradation of Ciprofloxacin

Ciprofloxacin (CIP) in natural waters has been taken as a serious pollutant because of its hazardous biological and ecotoxicological effects. Here, a 3D nanocomposite photocatalyst g-C₃N₄/La-N-TiO₂ (CN/La-N-TiO₂) was successfully synthesized by a simple and reproducible in-situ synthetic method. The obtained composite was characterized by XRD, SEM, BET, TEM, mapping, IR, and UV-vis spectra. The photocatalytic degradation of ciprofloxacin was investigated by using CN/La-N-TiO₂ nanocomposite. The main influential factors such as pH of the solution, initial CIP concentration, catalyst dosage, and coexisting ions were investigated in detail. The fastest degradation of CIP occurred at a pH of about 6.5, and CIP (5 mg/L starting concentration) was completely degraded in about 60 min after exposure to the simulated solar light. The removal rates were rarely affected by Na⁺ (10 mg·L⁻¹), Ca²⁺ (10 mg·L⁻¹), Mg²⁺ (10 mg·L⁻¹), and urea (5 mg·L⁻¹), but decreased in the presence of NO₃⁻ (10 mg·L⁻¹). The findings indicate that CN/La-N-TiO₂ nanocomposite is a green and promising photocatalyst for large-scale applications and would be a candidate for the removal of the emerging antibiotics present in the water environment.

The photocatalytic properties and construction of a WS2/MoS2/CdS heterojunction

The as-prepared WS2/MoS2/CdS composite heterojunction semiconductor exhibited high photocatalytic activity when degrading organic pollutants under visible light illumination.

Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts

Efficient removal of low-concentration refractory pollutants is a crucial problem to ensuring water safety. The use of heterogeneous catalysis of molecular imprinting technology combined with traditional catalysts is a promising method to improve removal efficiency. Presently, the research into molecular imprinting targeting catalysts focuses mainly on material preparation and performance optimization. However, more researchers are investigating other applications of imprinting materials. This review provides recent progress in photocatalyst preparation, electrocatalyst, and Fenton-like catalysts synthesized by molecular imprinting. The principle and control points of target catalysts prepared by precipitation polymerization (PP) and surface molecular imprinting (S-MIP) are introduced. Also, the application of imprinted catalysts in targeted degradation of drugs, pesticides, environmental hormones, and other refractory pollutants is summarized. In addition, the reusability and stability of imprinted catalyst in water treatment are discussed, and the possible ecotoxicity risk is analyzed. Finally, we appraised the prospects, challenges, and opportunities of imprinted catalysts in the advanced oxidation process. This paper provides a reference for the targeted degradation of refractory pollutants and the preparation of targeted catalysts.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

A facile synthesis of molecularly imprinted polymers and their properties as electrochemical sensors for ethyl carbamate analysis

New molecularly imprinted polymers (MIPs), which exhibit specific recognition of ethyl carbamate (EC) have been synthesized and studied. In this process, EC was the template molecule and β-cyclodextrin derivatives were employed as functional monomers in the molecular imprinting technique (MIT). An EC molecularly imprinted sensor (EC-MIS) was prepared by using MIT surface modification. The EC-MIS was characterized by cyclic voltammetry, electrochemical impedance spectroscopy and differential pulse voltammetry. EC detection performance, binding parameters and dynamics mechanism were investigated. The result showed that the synthetic route designed was appropriate and that new MIP and EC-MIS were successfully prepared. The EC-MIS exhibited a good molecular recognition of EC. A linear relationship between current and EC concentration was observed using cyclic voltammetry and the detection limit was 5.86 μg L⁻¹. The binding constant (K = 4.75 × 10⁶ L mol⁻¹) between EC and the EC-MIS, as well as, the number of binding sites (n = 1.48) has been determined. The EC-MIS recognition mechanism for the EC is a two-step process. The sensor was applied for the determination of EC in Chinese yellow wines, and the results were in good agreement with the gas chromatography-mass spectrometry (GC-MS) method.

An ethyl carbamate (EC) molecularly imprinted sensor (EC-MIS) has been prepared. The molecular recognition properties of EC were investigated, the binding parameters determined, and the dynamic mechanism of EC-MIS recognizing EC explored.

Comparative study of photocatalytic activities of Zn5(OH)8Cl2·H2O and ZnO nanostructures in ciprofloxacin degradation: Response surface methodology and kinetic studies

Zinc hydroxide chloride monohydrate (Zn₅(OH)₈Cl₂·H₂O) and zinc oxide (ZnO) nanostructures were synthesized by simple precipitation and pyrolysis methods, respectively and characterized by means of various instrumental methods. Their photocatalytic efficiencies as two potential photocatalysts for photodegradation of a clinical wastewater, ciprofloxacin (CIP), were probed and compared. The results indicated that in comparison with Zn₅(OH)₈Cl₂·H₂O nanoplates, the photodegradation was 1.4 times faster when using ZnO nanoparticles as well as higher removal percentage. The optimum pH obtained was 8 that it is typically found for hospital wastewater. Analysis of variance (ANOVA) exhibited high R² values, high F-values, very low P-values, and non-significant lack of fit values demonstrating good correlation between experimental and predicted values of the response for both catalysts. Kinetic studies identified first order model as a suitable model for description of photodegradation processes for both nanosized Zn₅(OH)₈Cl₂·H₂O and ZnO. The chemical oxygen demand (COD) removal of 43.30 and 56.30% were obtained after 24h for Zn₅(OH)₈Cl₂·H₂O nanoplates and ZnO nanoparticles, respectively. Ultra-performance liquid chromatography method coupled with tandem mass spectrometry (UPLC-MS/MS) for the determination of CIP degradation products has been used. Taken together, ZnO nanoparticles were more efficient in CIP removal due to some properties as in higher surface area and lower band gap.

Photocatalytic parameters and kinetic study for degradation of dichlorophenol-indophenol (DCPIP) dye using highly active mesoporous TiO2 nanoparticles

Highly active mesoporous TiO2 of about 6nm crystal size and 280.7m(2)/g specific surface areas has been successfully synthesized via controlled hydrolysis of titanium butoxide at acidic medium. It was characterized by means of XRD (X-ray diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), FT-IR (Fourier transform infrared spectroscopy), TGA (thermogravimetric analysis), DSC (differential scanning calorimetry) and BET (Brunauer-Emmett-Teller) surface area. The degradation of dichlorophenol-indophenol (DCPIP) under ultraviolet (UV) light was studied to evaluate the photocatalytic activity of samples. The effects of different parameters and kinetics were investigated. Accordingly, a complete degradation of DCPIP dye was achieved by applying the optimal operational conditions of 1g/L of catalyst, 10mg/L of DCPIP, pH of 3 and the temperature at 25±3°C after 3min under UV irradiation. Meanwhile, the Langmuir-Hinshelwood kinetic model described the variations in pure photocatalytic branch in consistent with a first order power law model. The results proved that the prepared TiO2 nanoparticle has a photocatalytic activity significantly better than Degussa P-25.

Efficient Solar Energy Conversion Using CaCu3Ti4O12 Photoanode for Photocatalysis and Photoelectrocatalysis

A highly efficient third generation catalyst, CaCu₃Ti₄O₁₂ (CCTO) shows excellent photoelectrochemical (PEC) and photocatalytic ability. As only 4% part of the solar spectrum covers UV light, thus it is highly desirable to develop visible light active photocatalyst materials like CCTO for effective solar energy conversion. A direct band transition with a narrow band gap (1.5 eV) was observed. Under light irradiation, high photocurrent density was found to be 0.96 mA/cm², indicating the visible light induced photocatalytic ability of CCTO. Visible light mediated photocatalytic and photoelectrocatalytic degradation efficiency of CaCu₃Ti₄O₁₂ pellets (CCTO) was investigated for three classes of pharmaceutical waste: erythrosin (dye), ciprofloxacin (antibiotic) and estriol (steroid). It is found that the degradation process follows first order kinetic reaction in electrocatalysis, photocatalysis and photoelectrocatalysis and high kinetic rate constant was observed in photoelectrocatalysis. This was quite high in comparison to previously reported methods.

Photocatalytic and photoelectrocatalytic degradation of the antibacterial agent ciprofloxacin

Photocatalytic and photoelectrocatalytic degradation of the antibacterial fluoroquinolone drug, ciprofloxacin, has been studied in the presence of nanocrystalline titania films supported on glass slides or transparent electrodes.