Aggregation behavior of anionic surface active ionic liquids with double hydrocarbon chains in aqueous solution: Experimental and theoretical investigations

Electrochemical and Spectroscopic Studies Performed for Indomethacin and 1-Naphthol Incorporated in 1-Butyl-3-methyl-imidazolium Bis(2-ethylhexyl) Sulfosuccinate Vesicles to Investigate Them as a Potentially pH-Sensitive Nanocarrier

Characterization studies of 1-butyl-3-methyl-imidazolium bis(2-ethylhexyl) sulfosuccinate vesicles at different pH values have been carried out by using liquid surface tension, transmission electron microscopy, and dynamic light scattering. The results show that there are no vesicle changes in its size and negative Z potential at pH 3, 6, and 10. Furthermore, indomethacin and 1-naphthol, both pH-dependent, electroactive, and fluorescence probes, were used to further characterize the bilayer employing electrochemical and emission techniques. The partition of indomethacin and 1-naphthol between the water and bilayer pseudophases only occurs for the neutral species and does not happen for the anionic species because the highly negative Z bilayer potential prevents incorporation due to negative repulsion. For the neutral species, the partition constant values were evaluated by square wave voltammetry and emission spectroscopy. Finally, for the indomethacin incorporated into the vesicle bilayer at pH 3, the release profile was monitored over time at pH 6. It was found that a change in the pH values causes the complete release of indomethacin after 25 min, which led us to think that the vesicles presented in this work can be used as a pH-sensitive nanocarrier for neutral pH-sensitive drugs.

Gemini ionic liquid-based surfactants: efficient synthesis, surface activity, and use as inducers for the fabrication of Cu2O nanoparticles

Discovery of green and novel synthetic routes for nanoparticles (NPs) has drawn a lot of interest due to the distinct nano size and unusual features as well as applications of such particles. Ionic liquid-based surfactants (ILBSs) and gemini ionic liquid-based surfactants (GILBSs) have become some of the best choices to be used as inducers or dispersing agents for the fabrication of nanoparticles. This work involves the synthesis, spectroscopic characterization, and surface property evaluation of three novel GILBSs (4a-c), which incorporate the imidazolium cation as the polar head with an ethylene spacer. The simple synthetic route includes, first, alkylating imidazole-N1 with the as-prepared fatty alkyl chloroacetates followed by quaternization of two equivalents of imidazole-N2 with ethylene dibromide. Investigations into the compounds' surface characteristics and thermodynamic parameters were carried out. The prepared GILBSs, 4a-c, were then used as inducers at various concentrations for the preparation of cuprous oxide nanoparticles. The size and shape of the produced NPs were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis in each case to study the effect of concentration on the NP morphology and to determine the best concentration for the NPs fabrication. The XRD patterns of the produced Cu2O NPs contain distinguishable peaks, which refer to crystalline Cu2O. Also, TEM images show that the obtained Cu2O is present in form of well dispersed nanorod particles with sizes about 55 and 23 nm at concentrations of 60 and 200 ppm, respectively.

Synthesis, Aggregation Behavior and Drug-binding Interactions of Fatty acid-imidazolium-based Surface-active Ionic Liquids

The renewable fatty acid-based surface-active ionic liquids (SAILs) containing ethyl-substituted imidazolium head groups were prepared and structurally analyzed by Fourier transform infrared spectroscopy (FTIR), ¹HNMR and ¹³CNMR spectroscopy. The products were named as; 3-ethyl-1-(2-dodecanoyl oxy) ethylimidazolium bromide [C₁₂Eeim]Br, 3-ethyl-1-(2-tetradecanoyl oxy) ethylimidazolium bromide [C₁₄Eeim]Br and 3-ethyl-1-(2-hexadecanoyl oxy) ethylimidazolium bromide [C₁₆Eeim]Br. The critical micelle concentration (cmc) values of the three SAILs have been evaluated using conductivity measurements, probe-less UV-visible spectroscopy and fluorescence spectroscopy. The obtained cmc values were compared with the earlier reported non-functionalized SAILs such as [C_nmim]Br and [C_neim]Br where n= 12, 14, 16. The values were found to be 3 to 9 times lower mainly due to the presence of ester chain and also ethyl substituted imidazole ring. Thermodynamic parameters were evaluated by conductivity data at three different temperatures. Further, the aggregation behavior of SAILs with anesthetic drug, lidocaine hydrochloride (LC) has been studied using fluorescence. The fluorescence and UV-visible studies showed strong synergistic interactions operating between SAILs and drug molecules involving H bonding and cation-π interactions. The interactions grew stronger with the elongation of SAIL-chain length (12C-16C). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements suggested the formation of vesicles in SAIL-LC mixtures. These studies may thus offer an effective candidate which would serve as vectors for drug molecules in terms of their enhanced solubilization, permeability and target-specific delivery.

Scrutinizing Self-Assembly, Surface Activity and Aggregation Behavior of Mixtures of Imidazolium Based Ionic Liquids and Surfactants: A Comprehensive Review

The desire of improving various processes like enhanced oil recovery (EOR), water treatment technologies, biomass extraction, organic synthesis, carbon capture etc. in which conventional surfactants have been traditionally utilized; prompted various researchers to explore the self-assembly and aggregation behavior of different kinds of surface-active molecules. Ionic liquids (ILs) with long alkyl chain present in their structure constitute the advantageous properties of surfactant and ILs, hence termed as surface-active ionic liquids (SAILs). The addition of ILs and SAILs significantly influence the surface-activity and aggregation behavior of industrially useful conventional surfactants. After a brief review of ILs, SAILs and surfactants, the prime focus is made on analyzing the self-assembly of SAILs and the mixed micellization behavior of conventional surfactants with different ILs.

Biocompatible Solvents and Ionic Liquid-Based Surfactants as Sustainable Components to Formulate Environmentally Friendly Organized Systems

In this review, we deal with the formation and application of biocompatible water-in-oil microemulsions commonly known as reverse micelles (RMs). These RMs are extremely important to facilitate the dissolution of hydrophilic and hydrophobic compounds for biocompatibility in applications in drug delivery, food science, and nanomedicine. The combination of two wisely chosen types of compounds such as biocompatible non-polar solvents and ionic liquids (ILs) with amphiphilic character (surface-active ionic liquids, SAILs) can be used to generate organized systems that perfectly align with the Green Chemistry concepts. Thus, we describe the current state of SAILs (protic and aprotic) to prepare RMs using non-polar but safe solvents such as esters derived from fatty acids, among others. Moreover, the use of the biocompatible solvents as the external phase in RMs and microemulsions/nanoemulsions with the other commonly used biocompatible surfactants is detailed showing the diversity of preparations and important applications. As shown by multiple examples, the properties of the RMs can be modified by changes in the type of surfactant and/or external solvents but a key fact to note is that all these modifications generate novel systems with dissimilar properties. These interesting properties cannot be anticipated or extrapolated, and deep analysis is always required. Finally, the works presented provide valuable information about the use of biocompatible RMs, making them a green and promising alternative toward efficient and sustainable chemistry.

Use of Ionic Liquids-like Surfactants for the Generation of Unilamellar Vesicles with Potential Applications in Biomedicine

The goal of this work is to understand the influence of the counterion nature on the organized systems formed by 1,4-bis-2-ethylhexylsulfosuccinate surfactants in aqueous solutions and how these aggregates will influence the deoxyribonucleic acid (DNA)-surfactant interactions. With this in mind, two ionic liquid-like surfactants were investigated: 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) and 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (hmim-AOT). Measurements of dynamic light scattering, ζ-potential, transmission electron microscopy, and fluorescence and UV-visible spectroscopy were performed to study the characteristics of the vesicles formed by bmim-AOT and hmim-AOT. Regarding the determination of the interaction of the surfactants with DNA, circular dichroism was used. The results obtained showed that bmim-AOT and hmim-AOT ionic liquid-like surfactants spontaneously form unilamellar vesicles in water at very low surfactant concentrations. The characteristics of these aggregates are dependent on the length of the tail of the counterions. The length of the hydrophobic chains of the counterions also influences the DNA-surfactant interactions through hydrophobic effects.

Characterization of Reverse Micelles Formulated with the Ionic-Liquid-like Surfactant Bmim-AOT and Comparison with the Traditional Na-AOT: Dynamic Light Scattering, 1H NMR Spectroscopy, and Hydrolysis Reaction of Carbonate as a Probe

The present study investigated how the presence of butylmethylimidazolium cation (bmim⁺) alters the interfacial properties of reverse micelles (RMs) created with the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT), in comparison to sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) RMs, employing dynamic light scattering (DLS) and ¹H NMR techniques. Moreover, through the hydrolysis reaction of bis(4-nitrophenyl)carbonate inside both RMs as reaction probe, interfacial properties changes were explored in more detail. The kinetic solvent isotope effect was also analyzed. Micellar systems were formed using n-heptane as external nonpolar solvent and water as the polar component. According to the DLS studies, water is encapsulated inside the organized media; however, a different tendency is observed depending on the cationic component of the surfactant. For Na-AOT system, the results suggest that the micellar shapes are probably spherical, while in the case of bmim-AOT, a transition from ellipsoidal to spherical micelles could be occurring when water is added. ¹H NMR data show that water is structured differently when Na⁺ cation is replaced by bmim⁺; in bmim-AOT RMs, the interaction of water with the surfactant is weaker and the water hydrogen-bonding network is less disturbed than in Na-AOT RMs. Kinetic studies reveal that the hydrolysis reaction in bmim-AOT RMs was much more favorable in comparison to Na-AOT RMs. In addition, when water content decreases in bmim-AOT RMs, the hydrolysis reaction rate increases and the solvent isotope effect remains constant, while for Na-AOT solutions, both the reaction rate and the solvent isotope effect decrease. Our results indicate that bmim⁺ cation would be located in the surfactant layer in such a way the negative charge density in the interface is less than that in Na-AOT RMs, and the reaction is more favorable. Additionally, as ¹H NMR studies reveal, the interfacial water molecules would be more available in bmim-AOT RMs to participate in the nucleophilic attack. Therefore, the present study evidences how the replacement of Na⁺ counterion by bmim⁺ alters the composition of the interface of AOT RMs.

Interfacial properties modulated by the water confinement in reverse micelles created by the ionic liquid-like surfactant bmim-AOT

The behavior of the interfacial water entrapped in reverse micelles (RMs) that were formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) was investigated with the use of UV-Vis absorption spectroscopy and nuclear magnetic resonance (NMR) relaxometry. The solvatochromism of two molecular probes, namely, 1-methyl-8-oxyquinolinium betaine (QB) and N,N,N',N'-tetramethylethylenediamine copper(ii)acetylacetonate tetraphenylborate ([Cu(acac)(tmen)][B(C6H5)4]), was investigated. As a comparison, the analog RMs formed by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) were also explored. By varying the water content inside the RMs and consequently the different magnitude of the water-surfactant interactions at the interface, interesting properties were observed by comparing bmim-AOT and Na-AOT RMs. From the solvatochromic behavior of ([Cu(acac)(tmen)][B(C6H5)4]), we found that the interface in bmim-AOT RMs shows a smaller electron donating capacity than that in Na-AOT RMs. QB revealed that the interfacial region is a weaker hydrogen bond donor and less polar than the corresponding Na-AOT RMs. NMR experiments showed that the molecular motion of water in bmim-AOT RMs is less restricted than that of the water molecules confined in Na-AOT RMs. In summary, the results show how the nature of the bmim+ cation affects the interaction between the entrapped water and the RM interface, greatly modifying the interfacial water structure in comparison with the results known for Na-AOT.

Combination of a protic ionic liquid-like surfactant and biocompatible solvents to generate environmentally friendly anionic reverse micelles

imim–DEHP, a versatile protic IL-like surfactant to formulate aqueous RMs in biocompatible non-polar solvents.

Flavonoid-surfactant interactions: A detailed physicochemical study

The aim of this article is to study the interactions between flavonoids and surfactants with attention of finding the probable location of flavonoids in micellar media that can be used for controlling their antioxidant behavior. In present study, the micellar and interfacial behavior of twin tailed anionic surfactants viz. sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and sodium bis(2-ethylhexyl)phosphate (NaDEHP) in the presence of two flavonoids, namely quercetin (QUE) and kaempferol (KFL) have been studied by surface tension measurements. UV-visible, fluorescence and differential pulse voltammetric (DPV) measurements have been employed to predict the probable location of flavonoids (QUE/KFL) within surfactant (AOT/NaDEHP) aggregates. Dynamic light scattering (DLS) measurements further confirmed the solubilization of QUE/KFL in AOT/NaDEHP aggregates deduced from increased hydrodynamic diameter (Dh) of aggregates in the presence of flavonoids. Both radical scavenging activity (RSA) and degradation rate constant (k) of flavonoids are found to be higher in NaDEHP micelles as compared to AOT micelles.

Drug induced micelle-to-vesicle transition in aqueous solutions of cationic surfactants

Solubilization of the drug diclofenac sodium (DS) in micellar aggregates of ionic liquid-based surfactants and cetyltrimethylammonium bromide at 25 °C induces changes to worm-like micelles and vesicles, with potential use in drug delivery.

Improvement of the amphiphilic properties of a dialkyl phosphate by creation of a protic ionic liquid-like surfactant

Imim-DEHP, an interesting protic IL-like surfactant to create RMs in aliphatic and aromatic non-polar solvents and unilamellar vesicles in water.

How the cation 1-butyl-3-methylimidazolium impacts the interaction between the entrapped water and the reverse micelle interface created with an ionic liquid-like surfactant

The behavior of the interfacial water entrapped in reverse micelles (RMs) formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) dissolved in benzene (or chlorobenzene) was investigated using noninvasive techniques such as dynamic light scattering (DLS), static light scattering (SLS), FT-IR and (1)H NMR. The DLS and SLS results reveal the formation of discrete spherical and non-interacting water droplets stabilized by the bmim-AOT surfactant. Moreover, since the droplet size increases as the W0 (W0 = [water]/[surfactant]) value increases, water interacts with the RM interface. From FT-IR and (1)H NMR data, a weaker water-surfactant interaction in bmim-AOT RMs in comparison with the RMs created by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) is detected. Consequently, there are less water molecules interacting with the interface in bmim-AOT RMs, and their hydrogen bond network is not completely disrupted as they are in Na-AOT RMs. The results show how the nature of the new cation impacts the interaction between the entrapped water and the RM interface, modifying the interfacial water structure in comparison with the results known for Na-AOT.

Aggregation Behaviours of Surface-Active Ionic Liquids 1-Alkyl-3-methylimidazolium Bis(2-ethylhexyl)sulfosuccinate

The systematic investigation of the aggregation behaviours of newly synthesised surface-active ionic liquids 1-alkyl-3-methylimidazolium bis(2-ethylhexyl)sulfosuccinate ([Cnmim][AOT], n = 2, 3, 5, 6, 7) by various techniques is reported. The critical aggregation concentrations (CACs) and the standard Gibbs free energies of aggregation () were determined from measurements on conductivity, fluorescence, and surface tension, which suggested a stronger self-assembly ability in the bulk solution for [Cnmim][AOT] surfactants with longer alkyl chain cations. An interesting structure transition driven by the penetration of the imidazolium cation into the aggregate when n > 4 was found by analysis of the variations of the values of CAC, , the degree of counter ion binding (β), and the micropolarity (I1/I3) immediately after the CAC with changing alkyl chain length of the imidazolium cation, which was further confirmed by 1H NMR measurements.

Novel surface-active ionic liquids used as solubilizers for water-insoluble pesticides

Three surface active ionic liquids (ILs) containing organic anions but no halides were used as solubilizers for water insoluble pesticides and as well as alternates for similar ILs with halide anions, which have been increasingly popular in the agricultural practice. The solubilities of five pesticides (fluazifop-P, clethodim, pyrethrin, fosthiazate, and prochloraz) in three aqueous micellar systems, each containing 1-octyl-3-methylimidazolium--tartrate ([OMIM][Tart]), 1-octyl-3-methylimidazolium-l-proline ([OMIM][Prol]), 1-octyl-3-methylimidazolium-l-lactate ([OMIM][lact]), respectively, were measured. The solubilities of all five pesticides were found to increase with the increasing concentrations of ILs solubilzers The enhancements in solubilities were related to surface activities of these SAILs, as indicated in the results of the measurements of their corresponding critical aggregation concentration (CAC), lowest surface tension (γcac), maximum surface excess concentration (Γmax) and minimum area per molecule (Amin) of aqueous solutions of ILs. When comparing with similar ILs with halides as counter anions, we found that these ILs with organic counterions are at least comparable, often more effective solubilizers for all of the five very different pesticides we tested. We conclude that these novel SAILs with organic counterions would serve as at least similarly effective and more environmentally-friendly solubilizers over the more traditional ones with halides.

Structural rearrangement in the aqueous solution of surface active ionic liquid 1-butyl-3-methylimidazolium bis(2-ethylhexyl) sulfosuccinate

The aggregation behaviors of surface active ionic liquid 1-butyl-3-methylimidazolium bis(2-ethylhexyl) sulfosuccinate in aqueous solutions were investigated by conductometry, densimetry, fluorimetry, (1)H nuclear magnetic resonance ((1)H NMR) spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM), which confirmed two distinguished critical concentrations. The first critical concentration was believed to be the critical aggregation concentration (CAC), where two different types of aggregates were formed, namely, micelles with the size of 10 nm and vesicles with the size of 100 nm. The second critical concentration at two-fold CAC was suggested to be resulting from the insertion of the imidazolium cations into aggregates.

Physicochemical interactions between rhamnolipids and Pseudomonas aeruginosa biofilm layers

This study investigated the physicochemical interactions between a rhamnolipid biosurfactant and a biofilm layer. A concentration of 300 μg mL(-1) of rhamnolipids, which is around the critical micelle concentration value (240 μg mL(-1)), showed great potential for reducing biofilm. The surface free energy between the rhamnolipids and biofilm layer decreased, as did the negative surface charge, due to the removal of negatively charged humic-like, protein-like, and fulvic acid-like substances. The carbohydrate and protein concentrations composed of extracellular polymeric substances decreased by 31.6% and 79.6%, respectively, at a rhamnolipid concentration of 300 μg mL(-1). In particular, rhamnolipids can interact with proteins, leading to a reduction of the N source and amide groups on the membrane. For carbohydrates, the component ratio of glucosamine was decreased, but the levels of glucose and mannose that form the majority of the carbohydrates remained unchanged. To our knowledge, the present study is the first attempt at studying the interactions of the two phases of rhamnolipids and the biofilm layer, and as such is expected to clarify the mechanism by which rhamnolipids lead to a reduction in biofilm.