Surface functionalization of hydrogel by thiol-yne click chemistry for drug delivery

Light-mediated protein functionalization of photoclickable hydrogel interface for selective cell capture and dot blotting assay

The construction of versatile functional hydrogel interfaces holds promising prospects in biosensing and bioengineering. Herein, we introduced a light-induced protein conjugation strategy for on-demand surface modification of hydrogel interface based on the photoclick cyclization between primary amine and o-nitrobenzyl alcohol. We achieved the on-demand protein conjugation by grafting the molecular plugin, 4-(hydroxymethyl)-3-nitrobenzoic acid (HNBA), onto the hydrogel surface, followed by the mask-aided photoclick reaction with the protein of interest. This method enables the creation of protein patterns on hydrogel interface with a lower limit of pattern width at ∼70 μm. With this method, we demonstrated the surface engineering of epidermal growth factor (EGF) on hydrogel interface for selective capture of EGF receptor-positive cancer cells with an efficiency over 80%. Moreover, we applied the mask-aided photoclick conjugation method for antigen capture and developed a photoclickable hydrogel interface-based dot blotting assay. Due to the high-efficient antigen capture of photoclick conjugation, the photoclickable hydrogel interface-based dot blotting assay shows improved sensitivity for antigen detection with a limit of detection as 0.065 ng. We believed that this light-induced protein conjugation method holds the potential as a robust strategy for the construction of bioactive hydrogel interfaces for various bio-related applications.

Photocatalytic Thiol-Yne Reactions of Alkynyl Sulfides

Thiol-yne reactions typically employ thiols and terminal alkynes as the reaction partners. The thiol-yne reaction of alkynyl sulfides and thiols is possible when employing a nonmetal photocatalyst eosin Y, green LED irradiation, under an air atmosphere. Alkynyl sulfides were transformed in good overall yields (58-90% total yields, 11 examples) favoring the cis isomer. No addition to the α-position of the alkynyl sulfide is observed, and regioselectivity is believed to be controlled through the stabilization of radical intermediates by the adjacent sulfur atom. Furthermore, control experiments with "all-carbon" internal alkynes demonstrate that alkynyl sulfides possess improved reactivity and regioselectivity profiles during thiol-yne processes.

Review of Potential Drug-Eluting Contact Lens Technologies

The field of ophthalmology is expanding exponentially, both in terms of diagnostic and therapeutic capabilities, as well as the worldwide increasing incidence of eye-related diseases. Due to an ageing population and climate change, the number of ophthalmic patients will continue to increase, overwhelming healthcare systems and likely leading to under-treatment of chronic eye diseases. Since drops are the mainstay of therapy, clinicians have long emphasised the unmet need for ocular drug delivery. Alternative methods, i.e., with better compliance, stability and longevity of drug delivery, would be preferred. Several approaches and materials are being studied and used to overcome these drawbacks. We believe that drug-loaded contact lenses are among the most promising and are a real step toward dropless ocular therapy, potentially leading to a transformation in clinical ophthalmic practice. In this review, we outline the current role of contact lenses in ocular drug delivery, focusing on materials, drug binding and preparation, concluding with a look at future developments.

Thiolated Polymeric Hydrogels for Biomedical Applications: A Review

Hydrogels are a three-dimensional (3D) network of hydrophilic polymers. The physical and chemical crosslinking of polymeric chains maintains the structure of the hydrogels even when they are swollen in water. They can be modified with thiol by thiol epoxy, thiol-ene, thiol-disulfide, or thiol-one reactions. Their application as a matrix for protein and drug delivery, cellular immobilization, regenerative medicine, and scaffolds for tissue engineering was initiated in the early 21st century. This review focuses on the ingredients, classification techniques, and applications of hydrogels, types of thiolation by different thiol-reducing agents, along with their mechanisms. In this study, different applications for polymers used in thiolated hydrogels, including dextran, gelatin, polyethylene glycol (PEG), cyclodextrins, chitosan, hyaluronic acid, alginate, poloxamer, polygalacturonic acid, pectin, carrageenan gum, arabinoxylan, carboxymethyl cellulose (CMC), gellan gum, and polyvinyl alcohol (PVA) are reviewed.

Instant Adhesion of Amyloid-like Nanofilms with Wet Surfaces

The adhesion and modification of wet surfaces by an interfacial adlayer remain a key challenge in chemistry and materials science. Herein, we report a transparent and biocompatible amyloid-like nanofilm that breaks through the hydration layer of a wet surface and achieves strong adhesion with a hydrogel/tissue surface within 2 s. This process is facilitated by fast amyloid-like protein aggregation at the air/water interface and the resultant exposure of hydrophobic groups. The resultant protein nanofilm adhered to a hydrogel surface presents an adhesion strength that is 20 times higher than the maximum friction force between the upper eyelid and eyeball. In addition, the nanofilm exhibits controllable tunability to encapsulate and release functional molecules without significant activity loss. As a result, therapeutic contact lenses (CLs) could be fabricated by adhering the functionalized nanofilm (carrying drug) on the CL surface. These therapeutic CLs display excellent therapeutic efficacy, showing an increase in cyclosporin A (CsA) bioavailability of at least 82% when compared to the commercial pharmacologic treatment for dry eye syndrome. Thus, this work underlines the finding that the bioinspired amyloid-like aggregation of proteins at interfaces drives instant adhesion onto a wet surface, enabling the active loading and controllable release of functional building blocks.

An Overview on the Performance of 1,2,3-Triazole Derivatives as Corrosion Inhibitors for Metal Surfaces

This review accounts for the most recent and significant research results from the literature on the design and synthesis of 1,2,3-triazole compounds and their usefulness as molecular well-defined corrosion inhibitors for steels, copper, iron, aluminum, and their alloys in several aggressive media. Of particular interest are the 1,4-disubstituted 1,2,3-triazole derivatives prepared in a regioselective manner under copper-catalyzed azide-alkyne cycloaddition (CuAAC) click reactions. They are easily and straightforwardly prepared compounds, non-toxic, environmentally friendly, and stable products to the hydrolysis under acidic conditions. Moreover, they have shown a good efficiency as corrosion inhibitors for metals and their alloys in different acidic media. The inhibition efficiencies (IEs) are evaluated from electrochemical impedance spectroscopy (EIS) parameters with different concentrations and environmental conditions. Mechanistic aspects of the 1,2,3-triazoles mediated corrosion inhibition in metals and metal alloy materials are also overviewed.

Cyclodextrin embedded covalently crosslinked networks: synthesis and applications of hydrogels with nano-containers

Recent advancements in the synthesis of hydrogels containing cyclodextrin (CD) units within the gel network have been reviewed.

Structure–property relations of amphiphilic poly(furfuryl glycidyl ether)-block-poly(ethylene glycol) macromonomers at the air–water interface

Structure–property relations of poly(furfuryl glycidyl ether)-block-poly(ethylene glycol) macromonomers at the air–water interface are studied with a Langmuir film balance.

Biomaterials and controlled release strategy for epithelial wound healing

The skin and cornea are tissues that provide protective functions. Trauma and other environmental threats often cause injuries, infections and damage to these tissues, where the degree of injury is directly correlated to the recovery time. For example, a superficial skin or corneal wound may recover within days; however, more severe injuries can last up to several months and may leave scarring. Thus, therapeutic strategies have been introduced to enhance the wound healing efficiency and quality. Although the skin and cornea share similar anatomic structures and wound healing process, therapeutic agents and formulations for skin and cornea wound healing differ in accordance with the tissue and wound type. In this review, we describe the anatomy and epithelial wound healing processes of the skin and cornea, and summarize the therapeutic molecules that are beneficial to the respective regeneration process. In addition, biomaterial scaffolds that inherently possess bioactive properties or modified with therapeutic molecules for topical controlled release and enhanced wound healing efficiency are also discussed.

Advances in Receptor-Mediated, Tumor-Targeted Drug Delivery

Receptor-mediated drug delivery presents an opportunity to enhance therapeutic efficiency by accumulating drug within the tissue of interest and reducing undesired, off-target effects. In cancer, receptor overexpression is a platform for binding and inhibiting pathways that shape biodistribution, toxicity, cell binding and uptake, and therapeutic function. This review will identify tumor-targeted drug delivery vehicles and receptors that show promise for clinical translation based on quantitative in vitro and in vivo data. The authors describe the rationale to engineer a targeted drug delivery vehicle based on the ligand, chemical conjugation method, and type of drug delivery vehicle. Recent advances in multivalent targeting and ligand organization on tumor accumulation are discussed. Revolutionizing receptor-mediated drug delivery may be leveraged in the therapeutic delivery of chemotherapy, gene editing tools, and epigenetic drugs.

Surface-Selective Grafting of Crosslinking Layers on Hydrogel Surfaces via Two Different Mechanisms of Photopolymerization for Site-Controllable Release

This study reports an effective method for controlling substance-release sites of hydrogel. Glycidyl methacrylate, which contains two functional groups, namely, double-bond acrylate and epoxide, is photografted on a hydrogel surface through hydrogen abstraction photopolymerization due to the existence of a hydrogen donor, such as an amine, in the hydrogel matrix. The remaining epoxide group crosslinks the polymer chain of polyglycidyl methacrylate. Substance release of hydrogel is changed due to the altered surface texture of hydrogel. Rate and site-controlled substance release are achieved by controlling the thickness and site of surface grafting and the extent of epoxide ring opening. This study may provide a novel method for achieving hydrogel function or modified performance of other biomaterials to meet biological activity requirements.

Site-Specific Surface Functionalization via Microchannel Cantilever Spotting (µCS): Comparison between Azide-Alkyne and Thiol-Alkyne Click Chemistry Reactions

Different types of click chemistry reactions are proposed and used for the functionalization of surfaces and materials, and covalent attachment of organic molecules. In the present work, two different catalyst-free click approaches, namely azide-alkyne and thiol-alkyne click chemistry are studied and compared for the immobilization of microarrays of azide or thiol inks on functionalized glass surfaces. For this purpose, the surface of glass is first functionalized with dibenzocyclooctyne-acid (DBCO-acid), a cyclooctyne with a carboxyl group. Then, the DBCO-terminated surfaces are functionalized via microchannel cantilever spotting with different fluorescent and nonfluorescent azide and thiol inks. Although both routes work reliably for surface functionalization, the protein binding experiments reveal that using a thiol-alkyne route will obtain the highest surface density of molecular immobilization in such spotting approaches. The obtained achievements and results from this work can be used for design and manufacturing of microscale patterns suitable for biomedical and biological applications.

A review on therapeutic contact lenses for ocular drug delivery

Contact lenses for ophthalmic drug delivery have become very popular, due to their unique advantages like extended wear and more than 50% bioavailability. To achieve controlled and sustained drug delivery from contact lenses, researchers are working on various systems like polymeric nanoparticles, microemulsion, micelle, liposomes, use of vitamin E, etc. Numerous scientists are working on different areas of therapeutic contact lenses to treat ocular diseases by implementing techniques like soaking method, molecular imprinting, entrapment of drug-laden colloidal nanoparticles, drug plate/film, ion ligand polymeric systems, supercritical fluid technology, etc. Though sustained drug delivery was achieved using contact lens, the critical properties such as water content, tensile strength (mechanical properties), ion permeability, transparency and oxygen permeability were altered, which limit the commercialization of therapeutic contact lenses. Also issues like drug stability during processing/fabrication (drug integrity test), zero order release kinetics (prevent burst release), drug release during monomer extraction step after fabrication (to remove un-reacted monomers), protein adherence, drug release during storage in packaging solution, shelf life study, cost-benefit analysis, etc. are still to be addressed. This review provides an expert opinion on different methodology to develop therapeutic contact lenses with special remark of their advantages and limitations.

A Photochromic Copolymer Hydrogel Contact Lens: From Synthesis to Application

A photochromic poly(2-hydroxyl-ethyl methacrylate-N-vinylpyrrolidone-spironaphthoxazine) hydrogel (p(HEMA-NVP-SPO)) has been designed and synthesized by free radical polymerization in this work. The chemical and structural information of hydrogels was investigated by IR spectra, equilibrium water content (EWC), and SEM. The IR spectra confirmed successful synthesis of copolymer. The domain of NVP contributed to not only EWC but also inner structure of hydrogel, while SPO had little influence on these properties of hydrogel. The photochromic behaviors of hydrogel including photochromic properties and thermal fading kinetics were systematically studied and compared with hydrogel made by immersing method. Results showed that when SPO was incorporated in hydrogel by polymerization, maximum absorbance wavelength got shorter, and the relaxation half-life became longer. In addition, salicylic acid as a drug model could be loaded into hydrogel by immersing method, and its sustained drug release in a given period was dependent on the characteristics of solution and loading time.