The effect of porosity and stiffness of glutaraldehyde cross-linked egg white scaffold simulating aged extracellular matrix on distribution and aggregation of ovarian cancer cells

Development of ovalbumin implants with different spatial configurations for treatment of peripheral nerve injury

Peripheral nerve injury (PNI) seriously affects the health and life of patients, and is an urgent clinical problem that needs to be resolved. Nerve implants prepared from various biomaterials have played a positive role in PNI, but the effect should be further improved and thus new biomaterials is urgently needed. Ovalbumin (OVA) contains a variety of bioactive components, low immunogenicity, tolerance, antimicrobial activity, non-toxicity and biodegradability, and has the ability to promote wound healing, cell growth and antimicrobial properties. However, there are few studies on the application of OVA in neural tissue engineering. In this study, OVA implants with different spatial structures (membrane, fiber, and lyophilized scaffolds) were constructed by casting, electrospinning, and freeze-drying methods, respectively. The results showed that the OVA implants had excellent physicochemical properties and were biocompatible without significant toxicity, and can promote vascularization, show good histocompatibility, without excessive inflammatory response and immunogenicity. The in vitro results showed that OVA implants could promote the proliferation and migration of Schwann cells, while the in vivo results confirmed that OVA implants (the E5/70% and 20 kV 20 μL/min groups) could effectively regulate the growth of blood vessels, reduce the inflammatory response and promote the repair of subcutaneous nerve injury. Further on, the high-throughput sequencing results showed that the OVA implants up-regulated differential expression of genes related to biological processes such as tumor necrosis factor-α (TNF-α), phosphatidylinositide 3-kinases/protein kinase B (PI3K-Akt) signaling pathway, axon guidance, cellular adhesion junctions, and nerve regeneration in Schwann cells. The present study is expected to provide new design concepts and theoretical accumulation for the development of a new generation of nerve regeneration implantable biomaterials.

Cancer cell response to extrinsic and intrinsic mechanical cue: opportunities for tumor apoptosis strategies

Increasing studies have revealed the importance of mechanical cues in tumor progression, invasiveness and drug resistance. During malignant transformation, changes manifest in either the mechanical properties of the tissue or the cellular ability to sense and respond to mechanical signals. The major focus of the review is the subtle correlation between mechanical cues and apoptosis in tumor cells from a mechanobiology perspective. To begin, we focus on the intracellular force, examining the mechanical properties of the cell interior, and outlining the role that the cytoskeleton and intracellular organelle-mediated intracellular forces play in tumor cell apoptosis. This article also elucidates the mechanisms by which extracellular forces guide tumor cell mechanosensing, ultimately triggering the activation of the mechanotransduction pathway and impacting tumor cell apoptosis. Finally, a comprehensive examination of the present status of the design and development of anti-cancer materials targeting mechanotransduction is presented, emphasizing the underlying design principles. Furthermore, the article underscores the need to address several unresolved inquiries to enhance our comprehension of cancer therapeutics that target mechanotransduction.

The enhanced properties and bioactivity of poly-ε-caprolactone/poly lactic-co-glycolic acid doped with carbonate hydroxyapatite-egg white

Synthetic polymers, such as PCL and PLGA, are among the main material choices in tissue engineering because of their stable structures and strong mechanical properties. In this study, we designed polycaprolactone (PCL)/polylactic-co-glycolate acid (PLGA) nanofibers doped with carbonate hydroxyapatite (CHA) and egg white (EW) with enhanced properties. The addition of CHA and EW significantly influenced the properties and morphology of PCL/PLGA nanofibers; whereby the CHA substitution (PCL/PLGA/CHA) greatly increased the mechanical properties related to the Young's modulus and EW doping (PCL/PLGA/CHA/EW) increased the elongation at break. Bioactivity tests of PCL/PLGA/CHA/EW after immersion in the SBF for 3 to 9 days showed increased fiber diameters and a good swelling capacity that could improve cell adhesion, while biocompatibility tests with NIH-3T3 fibroblast cells showed good cell proliferation (85%) after 48 h and antibacterial properties against S. aureus.

Glucose Oxidase/Egg White Protein Microparticles with a Redox Mediator for Glucose Biosensors on a Screen-Printed Electrode and a Decomposable Electrode

Glucose oxidase (GOx) is a typical model enzyme used to create biosensors. Exploring a strategy to prepare ready-to-use functional enzymatic microparticles combining GOx and food-based proteins offers compelling advantages. However, no reports exist on the integration of egg white materials to synthesize functional biorecognition particles with glucose oxidation catalytic functions for electrochemical biosensors. Here, we demonstrate functional microparticles combining egg white proteins, GOx, and 9,10-phenanthrenequinone (PQ). The egg white proteins crosslink to form three-dimensional scaffolds to accommodate GOx and redox molecules. The PQ mediator enhances electron transfer between the electrode surface and the GOx enzyme's flavin adenine dinucleotides. The functional microparticles are directly applied to the printed electrode. The performance of these microparticles is evaluated using a screen-printed carbon nanotube (CNT)-modified electrode coated with GOx/PQ/egg white protein microparticles. The analytical performance of the system exhibits a linear range of 0.125-40 mM, with a maximum current (Imax) and a Michaelis-Menten constant (Km) being 0.2 µA and 4.6 mM, respectively. Additionally, a decomposable electrode composed of CNTs and edible oil conjugated with functional enzyme microparticles is shown to undergo degradation under gastric conditions. Utilizing food-based proteins to accommodate enzymes and to create redox-active microparticles for catalyzing glucose oxidation offers advantages in developing affordable and degradable bioelectrodes. This concept holds promise for advancing biocompatible electrodes in biosensor and bioelectronics applications.

Surgical cotton microfibers loaded with proteins and apatite: A potential platform for bone tissue engineering

Tissue engineering has emerged as the best alternative to replacing damaged tissue/organs. However, the cost of scaffold materials continues to be a significant obstacle; thus, developing inexpensive scaffolds is strongly encouraged. In this study, cellulose microfibers (C), gelatin (G), egg white (EW), and nanohydroxyapatite (nHA) were assembled into a quaternary scaffold using EDC-NHS crosslinking, followed by freeze-drying method. Cellulose microfibers as a scaffold have only received a limited amount of research due to the absence of an intrinsic three-dimensional structure. Gelatin, more likely to interact chemically with collagen, was used to provide a stable structure to the cellulose microfibers. EW was supposed to provide the scaffold with numerous cell attachment sites. nHA was chosen to enhance the scaffold's bone-bonding properties. Physico-chemical, mechanical, and biological characterization of scaffolds were studied. In-vitro using MG-63 cells and in-ovo studies revealed that all scaffolds were biocompatible. The results of the DPPH assay demonstrate the ability of CGEWnHA to reduce free radicals. The CGEWnHA scaffold exhibits the best properties with 56.84 ± 28.45 μm average pore size, 75 ± 1.4 % porosity, 39.23 % weight loss, 109.19 ± 0.98 kPa compressive modulus, and 1.72 Ca/P ratio. As a result, the constructed CGEWnHA scaffold appears to be a viable choice for BTE applications.

Synthetic Thermo-Responsive Terpolymers as Tunable Scaffolds for Cell Culture Applications

The use of tailored synthetic hydrogels for in vitro tissue culture and biomanufacturing provides the advantage of mimicking the cell microenvironment without issues of batch-to-batch variability. To that end, this work focused on the design, characterization, and preliminary evaluation of thermo-responsive, transparent synthetic terpolymers based on N-isopropylacrylamide, vinylphenylboronic acid, and polyethylene glycol for cell manufacturing and in vitro culture applications. Polymer physical properties were characterized by FT-IR, ¹H-NMR, DLS, rheology, and thermal-gravimetric analysis. Tested combinations provided polymers with a lower critical solution temperature (LCST) between 30 and 45 °C. Terpolymer elastic/shear modulus varied between 0.3 and 19.1 kPa at 37 °C. Cellular characterization indicated low cell cytotoxicity on NIH-3T3. Experiments with the ovarian cancer model SKOV-3 and Jurkat T cells showed the terpolymers’ capacity for cell encapsulation without interfering with staining or imaging protocols. In addition, cell growth and high levels of pluripotency demonstrated the capability of terpolymer to culture iPSCs. Characterization results confirmed a promising use of terpolymers as a tunable scaffold for cell culture applications.

Dual functional carbonate-hydroxyapatite nanocomposite from Pinctada maxima and egg-white for bone tissue engineering

This study aims to design a 3D carbonate-hydroxyapatite (CHA)/sago (S) based egg white (EW) microstructure with antibacterial properties to improve the performance of bone grafts for bone tissue engineering. In this study, Pinctada maxima (P. maxima) shell was used as a calcium (Ca) source in CHA synthesis. The annealing temperature of CHA at 900, 1000, and 1100 °C affected microstructural and lattice parameters, with stoichiometry 1.72-1.77, and B-type CHA was identified. CHA/S with various concentrations of EW (10 and 30 wt.%) effectively increased pore size and porosity. XRD spectra confirmed that sago and EW in CHA nanocomposite stable the crystal structure. FTIR spectrum shows protein phosphorylation in CHA nanocomposite due to PO₄^3- ion exchange. In-vitro bioactivity of CHA-S10 (MTT assay) showed increased cell viability and optical density (OD; 24-48 h) to control. Antibacterial activity of CHA-S10 and CHA/S (control) against bacteria associated with periodontal disease and bone infection (Actinobacillus actinomycetemcomitans [A. actinomycetemcomitans], Porphyromonas gingivalis [P. gingivalis], Fusobacterium nucleatum [F. nucleatum; gram negative], and Staphylococcus aureus [S. aureus; gram positive]) by disc diffusion method showed that CHA-S10 and CHA/S had strong antibacterial activity. In conclusion, EW's properties had proven the CHA/S/EW as bone grafts, effectively increasing pore size, porosity, biocompatibility, and strong antibacterial properties.

In vitro bioactivity of 3D microstructure hydroxyapatite/collagen based-egg white as an antibacterial agent

The present study aims to design 3D scaffold hydroxyapatite (HA)/collagen (Coll) based egg-white (EW) as antibacterial properties. The calcium source in HA synthesis derived from the Pinctada maxima shell cultivated on Bali Island has proven biocompatibility, and the compressive strength exceeded human bone. HA synthesis by precipitation with heat treatment in oven-dried at 80°C (HA-80) and annealed at 900°C (HA-900), has crystallinity 48% and 85%, respectively, were used for scaffold design. The physicochemical properties of X-ray diffractometer spectra showed that increasing temperature affected the crystallinity and HA phase formed. Furthermore, the crystal structure of HA changed in nanocomposite due to the substitution of Coll and EW, and the Fourier transform infrared spectroscopy spectra confirmed that the absorption peak of the phosphate group (1027-1029 cm^-1 ) decreased intensity, presumably by protein binding of EW and Coll. The cell viability of HA/Coll/EW in 24, 48, and 72 h incubation period was 112.34 ± 4.36, 104.89 ± 3.41, 72.88 ± 6.85, respectively. The decreases of cell viability due to high cell density and reduced nutrients in wells. Antibacterial activity of HA/Col/EW exhibited a strong zone of inhibition against bacteria causing periodontitis; Porphyromonas gingivalis, Aggregatibacter actinomycetemcomitans, Fusobacterium nucleatum, and Staphylococcus aureus.

An insight on egg white: From most common functional food to biomaterial application

Natural egg white tis widely used as an ingredient in nutritional foods and for food processing. Due to its characteristic foaming, emulsification, adhesion, and gelation, and its heat setting, biocompatibility, and low cost, research into the application and development of egg white in biomaterials, especially medical biomaterials, have been receiving attention. The composition and characteristics of egg white protein, and the physical mixing and chemically cross-linking of egg white with other materials used to make degradable packaging films, bioceramics, bioplastics, biomimetic films, hydrogels, 3D scaffolds, bone regeneration, biopatterning, biosensors, and so forth, are reviewed in detail in this report. The novel egg white-based biomaterials in various forms and applications could be constructed mostly through physical treatments such as ultrasonic wave, ultraviolet, laser and other radiation or high-temperature calcination. Furthermore, the application and prospects for the use of egg white in biomaterials is also discussed.