Size effect of calcium-humic acid non-rigid complexes on the fouling behaviors in nanofiltration: An LA-ICP-MS study

Chromium (III) and chromium (VI) removal and organic matter interaction with nanofiltration

Chromium (Cr) is a toxic inorganic contaminant for drinking water, in which the concentration has to be controlled for human health and safety. Cr retention was investigated with stirred cell experiments using sulphonated polyethersulfone nanofiltration (NF) membranes of different molecular weight cut-off (MWCO). Cr(III) and Cr(VI) retention follow the order of the MWCO of the studied NF membranes; HY70-720 Da > HY50-1000 Da > HY10-3000 Da with a pH dependency, especially for Cr(III). The importance of the charge exclusion was highlighted when Cr(OH)₄^- (for Cr(III)) and CrO₄^2- (for Cr(VI)) was the predominant species in the feed solution. In presence of organic matter, namely humic acid (HA), Cr(III) retention increased by 60 %, while no influence of HA was observed for Cr(VI). HA did not induce major modifications on the membrane surface charge for these membranes. Solute-solute interaction, in particular Cr(III)-HA complexation, was the responsible mechanism for the increase in Cr(III) retention. This was confirmed by asymmetric flow field-flow fractionation, coupled with inductively coupled plasma mass spectrometry (FFFF-ICP-MS) analysis. Cr(III)-HA complexation was significant at HA concentrations as low as 1 mgC/L. The chosen NF membranes were able to achieve the EU guideline (25 μg/L) for Cr in drinking water for a feed concentration of 250 μg/L.

Removal of natural organic matter from surface water sources by nanofiltration and surface engineering membranes for fouling mitigation - A review

Given that surface water is the primary supply of drinking water worldwide, the presence of natural organic matter (NOM) in surface water presents difficulties for water treatment facilities. During the disinfection phase of the drinking water treatment process, NOM aids in the creation of toxic disinfection by-products (DBPs). This problem can be effectively solved using the nanofiltration (NF) membrane method, however NOM can significantly foul NF membranes, degrading separation performance and membrane integrity, necessitating the development of fouling-resistant membranes. This review offers a thorough analysis of the removal of NOM by NF along with insights into the operation, mechanisms, fouling, and its controlling variables. In light of engineering materials with distinctive features, the potential of surface-engineered NF membranes is here critically assessed for the impact on the membrane surface, separation, and antifouling qualities. Case studies on surface-engineered NF membranes are critically evaluated, and properties-to-performance connections are established, as well as challenges, trends, and predictions for the field's future. The effect of alteration on surface properties, interactions with solutes and foulants, and applications in water treatment are all examined in detail. Engineered NF membranes containing zwitterionic polymers have the greatest potential to improve membrane permeance, selectivity, stability, and antifouling performance. To support commercial applications, however, difficulties related to material production, modification techniques, and long-term stability must be solved promptly. Fouling resistant NF membrane development would be critical not only for the water treatment industry, but also for a wide range of developing applications in gas and liquid separations.

Influence of Soil Colloids on Ni Adsorption and Transport in the Saturated Porous Media: Effects of pH, Ionic Strength, and Humic Acid

Natural colloids are widely distributed in soil and groundwater. Due to their specific characteristics, colloids can actively involve various transport contaminants, resulting in a complicated fate and the transport of heavy metals to the environment. This study investigated the effects of soil colloids on the adsorption and transport of Ni2+ in saturated porous media under different conditions, including pH, ion strength (IS), and humic acid (HA), because these indexes are non-negligible in the fates of various organic or inorganic matters in the subsurface environment. The results indicate that Ni2+ adsorption by soil colloids slightly increased from 17% to 25% with the increase of pH from 5.5 to 7.5 at the IS of 30 mmol·L−1, whilst it significantly reduced from 55% to 17% with the increase of IS from 0 to 30 mmol·L−1 at a pH of 5.5. Both Langmuir and Freundlich models can fit the adsorption isotherms of Ni2+ on soil colloids and quartz sand. According to the column experiment, the presence of soil colloids increased the initial penetration rate, but could not increase the final transport efficiency of Ni2+ in the effluent. The presence of soil colloids has weakened the effect of IS on Ni2+ transport in the sand column. Moreover, this experiment implies that HA remarkably decreased the Ni2+ transport efficiency from 71.3% to 58.0% in the presence of soil colloids and that there was no significant difference in the HA effect on the Ni2+ transport in the absence of soil colloids.

Membrane biofouling retardation by zwitterionic peptide and its impact on the bacterial adhesion

Nanofiltration polyamide membranes naturally tend towards biofouling, due to their surface physicochemistries. Nisin, a type of short cationic amphiphilic peptide with antimicrobial properties, has been recognized as a safe antimicrobial for food biopreservation and biomedical applications. This study investigates the impact of nisin on the initial bacterial attachment to membranes, its anti-biofouling properties, and characterizes a non-monotonic correlation between nisin concentration and biofilm inhibition. Nisin was found to inhibit B. subtilis (G+) and P. aeruginosa (G-) attachment to both the nanofiltration membrane and the PES membrane. To determine the mechanism of action, we investigated the polysaccharides, protein, and eDNA as target components. We found that the quantities of polysaccharides and eDNA were significantly changed, resulting in bacterial death and anti-adhesion to membrane. However, there were no discernable impacts on protein. We postulated that nisin could prevent irreversible biofouling by decreasing adhesion, killing bacteria, and reducing biofilm formation. We examined membrane flux behavior through bench-scale cross-flow experiments at a set concentration of nisin (100 μg mL^-1), with membrane behavior being confirmed using CLSM images. Results showed that nisin could enhance anti-biofouling properties through both anti-adhesive and anti-bacterial effects, and therefore could be a novel strategy against biofouling of membranes.

Real-time monitoring of nanoscale TiO2 concentration by spectrophotometry: implications of agglomeration due to natural organic matter and multivalent ions

The study of the environmental fate of nanoscale TiO₂ (n-TiO₂) is a major recent research focus which requires a rapid and accurate on-site concentration determination method. Inductively coupled plasma mass spectroscopy (ICP-MS) has been the most widely used method for determining the concentration of n-TiO₂ in environmental samples; however, poses many challenges, such as hazardous hydrofluoric acid pre-treatment and clear limitations in mobile on-site measurement and monitoring. This study demonstrates that industrial wastewater containing natural organic matter (NOM) can present a major challenge to the analysis of n-TiO₂ by ICP-MS, and introduces a spectrophotometry technique that can be used as an alternative. The results suggest that spectrophotometry methods can be more accurate than slurry nebulization ICP-MS for measuring the concentrations of n-TiO₂ in wastewater containing NOM under low salt conditions. Furthermore, this study demonstrates the use of a portable flow-through spectrophotometer for use in applications of wastewater treatment and environmental monitoring with real-time feedback of n-TiO₂ concentrations. The ability to detect and monitor n-TiO₂ will greatly assist in improving the understanding of hazards and risks that emerging nanomaterials pose to the environment and the public health.