Cross-linkable chitosan-based hydrogel microbeads with pH-responsive adsorption properties for organic dyes prepared using size-tunable microchannel emulsification technique

Agar/graphene oxide hydrogels as nano-bioadsorbents: a comparative analysis for dye removal

Nano-biocomposite hydrogel samples were produced using graphene oxide (GO) and agar and applied as adsorbents of organic components in water. The hydrogels were prepared by varying the wt% of Agar and GO. The samples were characterized, and batch adsorption experiments evaluated the effect of initial pH, equilibrium isotherms, and kinetics for the adsorption of the anionic dye Acid Orange 7 (AO) and the cationic dyes Nile Blue A (NB) and methylene blue (MB) in an aqueous medium. Overall, both hydrogel samples exhibited satisfactory results for removing NB and MB; however, there was no effective removal for the anionic dye AO. Adsorption equilibrium isotherms were obtained, and Freundlich, Langmuir, and Sips models were fitted to the experimental equilibrium data; moreover, kinetic data were adjusted to driving force models and particle mass balance. The maximum experimental adsorption capacities, 141.48 mg·g-1 (MB) and 284.69 mg·g-1 (NB), were obtained, on a dry basis, for the sample produced with 70 wt% of agar and 30 wt% of GO. Both hydrogels exhibited remarkable regenerative potential for NB and MB, with the adsorption capacity remaining constant, even after five adsorption/desorption cycles.

Chitosanase-immobilized magnetite-agar gel particles as a highly stable and reusable biocatalyst for enhanced production of physiologically active chitosan oligosaccharides

A novel immobilized chitosanase was developed and utilized to produce chitosan oligosaccharides (COSs) via chitosan hydrolysis. Magnetite-agar gel particles (average particle diameter: 338 μm) were prepared by emulsifying an aqueous agar solution dispersing 200-nm magnetite particles with isooctane containing an emulsifier at 80 °C, followed by cooling the emulsified mixture. The chitosanase from Bacillus pumilus was immobilized on the magnetite-agar gel particles chemically activated by introducing glyoxyl groups with high immobilization yields (>80%), and the observed specific activity of the immobilized chitosanase was 16% of that of the free enzyme. This immobilized chitosanase could be rapidly recovered from aqueous solutions by applying magnetic force. The thermal stability of the immobilized chitosanase improved remarkably compared with that of free chitosanase: the deactivation rate constants at 35 °C of the free and immobilized enzymes were 8.1 × 10-5 and 3.9 × 10-8 s-1, respectively. This immobilized chitosanase could be reused for chitosan hydrolysis at 75 °C and pH 5.6, and 80% of its initial activity was maintained even after 10 cycles of use. COSs with a degree of polymerization (DP) of 2-7 were obtained using this immobilized chitosanase, and the product content of physiologically active COSs (DP ≥ 5) reached approximately 50%.

Advanced technologies in water treatment: Chitosan and its modifications as effective agents in the adsorption of contaminants

Chitosan, derived from the abundant biopolymer chitin, has emerged as a promising option for water treatment due to its intrinsic bioavailability. This review emphasizes the notable characteristics of chitosan, which allow for various modifications, expanding its applications. The polymer's effectiveness in adsorbing contaminants, particularly in advanced water treatment technologies, is highlighted. The review underscores the potential of chitosan-based hybrid materials, including nanocomposites, hydrogels, membranes, films, sponges, nanoparticles, microspheres, and flakes, as innovative alternatives to traditional chemical-based adsorbents. The advantages of using these materials in wastewater treatment, especially in removing heavy metals, dyes, and emerging compounds, are explored. The study delves into the mechanisms involved in wastewater treatment with chitosan, emphasizing the interactions between the polymer and various contaminants. Additionally, the application of chitosan as a contaminant removal agent in a post-pandemic context is addressed, considering the challenges related to waste management and environmental preservation. The analysis highlights the potential contribution of chitosan in mitigating environmental impacts post-pandemic, offering practical solutions for treating contaminated effluents and promoting sustainability. The study addresses current obstacles and prospects for chitosan-based wastewater treatment, emphasizing its promising role in sustainable water management.

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.76 mg g-1 for dyes, 392 mg g-1 for pesticides and phenols, 1890.3 mg g-1 for pharmaceuticals, and 537 g g-1 for oils and organic solvents have been reported. The review also attempted to convey to its readers the significance of wastewater treatment through adsorption by providing an overview on decontamination technologies of organic water contaminants. Various preparation methods of biopolymer-based gel beads and adsorption mechanisms involved in the process of decontamination have been summarized and analyzed. Therefore, we believe there is an urge to discuss the current state of the application of biopolymer-based gel beads for the adsorption of organic pollutants from wastewater and future perspectives in this regard since it is imperative to treat wastewater before releasing into freshwater bodies.

Enhanced dye sequestration with natural polysaccharides-based hydrogels: A review

Due to the expansion of industrial activities, the concentration of dyes in water has been increasing. The dire need to remove these pollutants from water has been heavily discussed. This study focuses on the reproducible and sustainable solution for wastewater treatment and dye annihilation challenges. Adsorption has been rated the most practical way of the several decolorization procedures due to its minimal initial investment, convenient utility, and high-performance caliber. Hydrogels, which are three-dimensional polymer networks, are notable because of their potential to regenerate, biodegrade, absorb bulky amounts of water, respond to stimuli, and have unique morphologies. Natural polysaccharide hydrogels are chosen over synthetic ones because they are robust, bioresorbable, non-toxic, and cheaply accessible. This study has covered six biopolymers, including chitosan, cellulose, pectin, sodium alginate, guar gum, and starch, consisting of their chemical architecture, origins, characteristics, and uses. The next part describes these polysaccharide-based hydrogels, including their manufacturing techniques, chemical alterations, and adsorption effectiveness. It is deeply evaluated how size and shape affect the adsorption rate, which has not been addressed in any prior research. To assist the readers in identifying areas for further research in this subject, limitations of these hydrogels and future views are provided in the conclusion.

Stimuli-Responsive Ion Adsorbents for Sustainable Separation Applications

Stimuli-responsive ion absorbents (SRIAs) with reversible ion adsorption and desorption properties have recently attracted immense attention due to their outstanding functionalities for sustainable separation applications. Over the past decade, a series of SRIAs that respond to single or multiple external stimuli (e.g., pH, gas, temperature, light, magnetic, and voltage) have been reported to achieve excellent ion adsorption capacity and selectivity while simultaneously allowing for their reusability. In contrast to traditional adsorbents that are mainly regenerated through chemical additives, SRIAs allow for reduced chemical and even chemical-free regeneration capacities, thereby enabling environmentally friendly and energy-efficient separation technologies. In this review, we systematically summarize the materials and strategies reported to date for synthesizing single-, dual-, and multiresponsive ion adsorbents. Following a discourse on the fundamental mechanisms that govern their adsorption and desorption under various external stimuli, we provide a concise discussion of the regeneration capacity and application of these responsive ion adsorbents for sustainable water desalination, toxic ion removal, and valuable ion extract and recovery. Finally, we discuss the challenges in developing and deploying these promising multifunctional responsive ion adsorbents together with strategies to overcome these limitations and provide prospects for their future.

Are Natural Compounds a Promising Alternative to Synthetic Cross-Linking Agents in the Preparation of Hydrogels?

The main aim of this review is to assess the potential use of natural cross-linking agents, such as genipin, citric acid, tannic acid, epigallocatechin gallate, and vanillin in preparing chemically cross-linked hydrogels for the biomedical, pharmaceutical, and cosmetic industries. Chemical cross-linking is one of the most important methods that is commonly used to form mechanically strong hydrogels based on biopolymers, such as alginates, chitosan, hyaluronic acid, collagen, gelatin, and fibroin. Moreover, the properties of natural cross-linking agents and their advantages and disadvantages are compared relative to their commonly known synthetic cross-linking counterparts. Nowadays, advanced technologies can facilitate the acquisition of high-purity biomaterials from unreacted components with no additional purification steps. However, while planning and designing a chemical process, energy and water consumption should be limited in order to reduce the risks associated with global warming. However, many synthetic cross-linking agents, such as N,N'-methylenebisacrylamide, ethylene glycol dimethacrylate, poly (ethylene glycol) diacrylates, epichlorohydrin, and glutaraldehyde, are harmful to both humans and the environment. One solution to this problem could be the use of bio-cross-linking agents obtained from natural resources, which would eliminate their toxic effects and ensure the safety for humans and the environment.

Edible films for cultivated meat production

Biomaterial scaffolds are critical components in cultivated meat production for enabling cell adhesion, proliferation, differentiation and orientation. Currently, there is limited information on the fabrication of edible/biodegradable scaffolds for cultivated meat applications. In the present work, several abundant, naturally derived biomaterials (gelatin, soy, glutenin, zein, cellulose, alginate, konjac, chitosan) were fabricated into films without toxic cross-linking or stabilizing agents. These films were investigated for support of the adhesion, proliferation and differentiation of murine and bovine myoblasts. These biomaterials supported cell viability, and the protein-based films showed better cell adhesion than the polysaccharide-based films. Surface patterns induced cell alignment and guided myoblast differentiation and organization on the glutenin and zein films. The mechanical properties of the protein films were also assessed and suggested that a range of properties can be achieved to meet food-related goals. Overall, based on adherence, proliferation, differentiation, mechanics, and material availability, protein-based films, particularly glutenin and zein, showed the most promise for cultivated meat applications. Ultimately, this work presents a comparison of suitable biomaterials for cultivated meat applications and suggests future efforts to optimize scaffolds for efficacy and cost.

In Situ Synthesis of Magnetic Poly(DMAEAB-co-NIPAm)@Fe3O4 Composite Hydrogel for Removal of Dye from Water

Water pollution by toxic substances, such as dye molecules, remains a major environmental problem that needs to be solved. In the present work, the magnetic composite hydrogel based on the poly(2-(methacryloyloxy)-N-(2-hydroxyethyl)-N,N-dimethylethan-1-aminium bromide-co-N-isopropylacrylamide) copolymer with incorporated Fe3O4 particles ((poly(DMAEAB-co-NIPAm)@Fe3O4)) was prepared by an in situ synthesis technique for the efficient removal of dye molecules from water. The successfully synthesized magnetic hydrogel was characterized by FTIR, XRD, TGA, and TEM. The removal efficiency of the anionic dye bromophenol blue (BPB) and the cationic dye rhodamine B (RDM) by the prepared hydrogel adsorbents was evaluated. Various adsorption parameters, including the concentration of adsorbents and adsorption time, were also investigated. The results showed that the synthesized magnetic hydrogel had excellent BPB removal performance compared to the removal of RDM. The optimum adsorbent concentration for 0.5 mM BPB solution was approximately 0.5 g/L, and the removal efficiency was more than 99%. The kinetics data of BPB removal fitted well into the pseudo-2nd-order model, indicating that BPB dye adsorption involves chemical adsorption and physical adsorption. In addition, recycling studies were conducted to examine the reusability of the magnetic hydrogel for BPB removal for up to five cycles and the hydrogel could be reused without losing its high removal efficiency. The magnetic hydrogel poly(DMAEAB-co-NIPAm)@Fe3O4 with high removal efficiency, good selectivity, and reusability shows great potential for the removal of anionic dyes in wastewater treatment.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

Protein-Stabilized Palm-Oil-in-Water Emulsification Using Microchannel Array Devices under Controlled Temperature

Microchannel (MC) emulsification for the preparation of monodisperse oil-in-water (O/W) and water-in-oil-in-water (W/O/W) emulsions containing palm oil as the oil phase was investigated for application as basic material solid/semi-solid lipid microspheres for delivery carriers of nutrients and drugs. Emulsification was characterized by direct observation of droplet generation under various operation conditions, as such, the effects of type and concentration of emulsifiers, emulsification temperature, MC structure, and flow rate of to-be-dispersed phase on droplet generation via MC were investigated. Sodium caseinate (SC) was confirmed as the most suitable emulsifier among the examined emulsifiers, and monodisperse O/W and W/O/W emulsions stabilized by it were successfully obtained with 20 to 40 µm mean diameter (d_m) using different types of MCs.

Marine collagen-chitosan-fucoidan cryogels as cell-laden biocomposites envisaging tissue engineering

The combination of marine origin biopolymers for tissue engineering (TE) applications is of high interest, due to their similarities with the proteins and polysaccharides present in the extracellular matrix of different human tissues. This manuscript reports on innovative collagen-chitosan-fucoidan cryogels formed by the simultaneous blending of these three marine polymers in a chemical-free crosslinking approach. The physicochemical characterization of marine biopolymers comprised FTIR, amino acid analysis, circular dichroism and SDS-PAGE, and suggested that the jellyfish collagen used in the cryogels was not denatured (preserved the triple helical structure) and had similarities with type II collagen. The chitosan presented a high deacetylation degree (90.1%) that can strongly influence the polymer physicochemical properties and biomaterial formation. By its turn, rheology, and SEM studies confirmed that these novel cryogels present interesting properties for TE purposes, such as effective blending of biopolymers without visible material segregation, mechanical stability (strong viscoelastic character), as well as adequate porosity to support cell proliferation and exchange of nutrients and waste products. Additionally, in vitro cellular assessments of all cryogel formulations revealed a non-cytotoxic behavior. The MTS test, live/dead assay and cell morphology assessment (phalloidin DAPI) showed that cryogels can provide a proper microenvironment for cell culturing, supporting cell viability and promoting cell proliferation. Overall, the obtained results suggest that the novel collagen-chitosan-fucoidan cryogels herein presented are promising scaffolds envisaging tissue engineering purposes, as both acellular biomaterials or cell-laden cryogels.

Ultrasound-Assisted Preparation of Chitosan/Nano-Activated Carbon Composite Beads Aminated with (3-Aminopropyl)Triethoxysilane for Adsorption of Acetaminophen from Aqueous Solutions

A composite chitosan/nano-activated carbon (CS-NAC) aminated by (3-aminopropyl)triethoxysilane (APTES) was prepared in the form of beads and applied for the removal of acetaminophen from aqueous solutions. NAC and APTES concentrations were optimized to obtain a suitable adsorbent structure for enhanced removal of the pharmaceutical. The aminated adsorbent (CS-NAC-APTES beads) prepared with 40% w/w NAC and 2% v/v APTES showed higher adsorption capacity (407.83 mg/g) than CS-NAC beads (278.4 mg/g). Brunauer–Emmett–Teller (BET) analysis demonstrated that the surface area of the CS-NAC-APTES beads was larger than that of CS-NAC beads (1.16 times). The adsorption process was well fitted by the Freundlich model (R² > 0.95), suggesting a multilayer adsorption. The kinetic study also substantiated that the pseudo-second-order model (R² > 0.98) was in better agreement with the experimental data. Finally, it was proved that the prepared beads can be recycled (by washing with NaOH solution) at least 5 times before detectable performance loss.

Eco-friendly porous carboxymethyl cellulose/dextran sulfate composite beads as reusable and efficient adsorbents of cationic dye methylene blue

Eco-friendly hydrogel composite beads based on crosslinked-carboxymethyl cellulose (CMC) and dextran sulfate (DS) embedded within network were prepared using ionotropic gelation in presence of sodium n-dodecyl sulfate (SDS) as pore-forming template. The milligels composites C/Dx were characterized by FTIR, SEM/EDX and TGA analyses. The composites exhibited porous structure and enhance in swelling properties with enriching DS as well as pH-sensitivity. The effect of DS on adsorption of composites for cationic dye methylene blue (MB) was investigated by changing influencing factors: pH, adsorbent dosage, time contact, dye concentration, and temperature. The results revealed that adsorption performances were remarkably improved by increasing DS content into beads. Kinetics and isotherm adsorption studies revealed pseudo second-order and Langmuir isotherm as befitting models. The maximum Langmuir equilibrium adsorption capacity (q_m) was found to increase from 82 mg g^-1 for C/D0 to 526 mg g^-1 for C/D1. Thermodynamic study revealed spontaneous and endothermic process nature. Furthermore, milligels displayed good reusability after five adsorption/desorption cycles and with an augment in their removal ability compared to starting ones, reaching 714 mg g^-1 for R-C/D1. In view of easy preparation and recovery, effectiveness adsorption and good regeneration, the composites could be applied as low-cost adsorbents in wastewater treatment.