Designing a transparent organogel layer with self-repairing property for the inhibition of marine biofouling

Overview of the development of slippery surfaces: Lubricants from presence to absence

The superhydrophobic surfaces inspired by the lotus have excellent performances and are known for their low contact angle hysteresis and smooth surfaces. However, there are still some problems, such as the unstable structure, poor durability, high product cost and so on that need to be improved. Those issues can be avoided via liquid-infused surfaces(LIS), which are inspired by Nepenthes and consist of a mico-nano structured substrate and a smooth continuous atomic-grade lubricant. Compared with superhydrophobic surfaces, LIS not only achieves the same hydrophobic properties but also has smaller contact angle hysteresis, smoother surface, more stable structure and lower preparation cost. Although the existence of a lubricant layer improves the performance of the material, it also leaves a hidden danger, which is easy to lose and leads to the deterioration of the durability of the material. Therefore, the lubricant-free slipper materials have attracted more and more attention in recent years due to their low volatility, good durability and excellent lubrication performance. In this review, the types of LIS lubricants and their physicochemical properties were summarized at the beginning and then the applications of LIS in various fields were introduced. At the end of this paper, some solid lubricants and their applications were described, and the future development prospects of LIS lubricants also were expected.

Designing a Highly Stable Slippery Organogel on Q235 Carbon Steel for Inhibiting Microbiologically Influenced Corrosion

Microbiologically influenced corrosion (MIC) accelerates the corrosion and degradation of metal materials due to the settlement of microorganisms on the surface. However, environmentally friendly and efficient methods to fabricate antifouling and anticorrosion surfaces are still lacking. Inspired by Nepenthes, a slippery liquid-infused porous surface (SLIPS) has been proven to be an efficient way to inhibit settlement of microorganisms on the metal surface and the following MIC due to the existence of a mobile defect-free lubricant layer. However, the stability of the lubricant layer and substrate of the SLIPS prevented its long-term antifouling and anticorrosion application. Herein, a highly stable slippery organogel was fabricated by depositing a homogeneous mixture of PDMS (base and curing agent), silicone oil, triethoxyvinylsilane, and SiO₂ on Q235 and curing in an oven. Triethoxyvinylsilane was not only able to cross-link with the curing agent of PDMS through hydrosilylation but also able to interlink the organogel and Q235 through condensation between the -OH of the metal surface and hydrolyzed siloxane. As a result, the adhesion force between the organogel without triethoxyvinylsilane and the substrate (0.45 MPa) increased to 1.50 MPa for the organogel with triethoxyvinylsilane and SiO₂. Also, the tensile strength of the organogel without SiO₂ (0.97 MPa) increased to 3.88 MPa for the organogel with 2 wt % SiO₂ because of the high elastic modulus of SiO₂, which was important to improving its stability under external force. In addition, the organogel showed stable oil distribution and slippery performance after spinning at 4000 rpm for 30 s. Then, the bacterial settlement demonstrated that the organogel could effectively inhibit Pseudoalteromonas sp. settlement on the substrate under both static and dynamic conditions. Finally, an electrochemical test indicated that the MIC could be effectively mitigated by the organogel. This study provides an efficient method to fabricate a highly stable slippery surface on a metal surface for its potential application in mitigating MIC.

Transparent Organogel Films Showing Extremely Efficient and Durable Anti-Icing Performance

Accumulation of ice and snow on solid surfaces causes destructive problems in our daily life. Therefore, the development of functional coatings/surfaces that can effectively prevent ice/snow adhesion by natural forces, such as airflow, vibration, solar radiation, or gravity, is in high demand. In this study, transparent organogel films possessing negligible ice adhesion strength were successfully designed by a simple cross-linking of poly(dimethylsiloxane) (PDMS) in the presence of commercially available oils. Both the molecular weights (MWs) of the infusing oils and their contents in the PDMS matrices have proven to be key parameters for primarily determining the cross-linking density of PDMS matrices and syneresis/nonsyneresis behaviors of our samples, which closely reflected the final surface static/dynamic dewetting and anti-icing properties. By tuning only these two parameters, three different types of transparent organogel films, that is, nonsyneresis organogel (NSG), self-lubricating organogel (SLUG-I, infused with highly mobile oils), and SLUG-II (infused with viscous oils) films, were prepared. Among them, on the SLUG-I films, the lubricating oils were found to be continuously released from the PDMS matrices through syneresis for more than 1 year. Due to this unusual syneresis behavior, the ice adhesion strength became virtually zero, and this excellent anti-icing property also remained almost unchanged even after several cycles of icing/deicing testing. On the other hand, in the case of SLUG-II films, as the lubricated oil layers were too viscous, ice had trouble sliding off the surfaces by gravity. In contrast to these SLUG films, ice adhesion strength on NSG films was markedly decreased by increasing the amount of the infusing oils. In spite of NSG films having no distinct mobile oil layer, the ice adhesion strength reached its minimum of only about 5 kPa.

How to Improve the Performance of Electrochemical Sensors via Minimization of Electrode Passivation

It follows from critical evaluation of possibilities and limitations of modern voltammetric/amperometric methods that one of the biggest obstacles in their practical applications in real sample analysis is connected with electrode passivation/fouling by electrode reaction products and/or matrix components. This review summarizes possibilities how to minimise these problems in the field of detection of small organic molecules and critically compares their potential and acceptability in practical laboratories. Attention is focused on simple and fast electrode surface renewal, the use of disposable electrodes just for one and/or few measurements, surface modification minimising electrode fouling, measuring in flowing systems, application of rotating disc electrode, the use of novel separation methods preventing access of passivating particles to electrode surface and the novel electrode materials more resistant toward passivation. An attempt is made to predict further development in this field and to stress the need for more systematic and less random research resulting in new measuring protocols less amenable to complications connected with electrode passivation.

A comparison between superhydrophobic surfaces (SHS) and slippery liquid-infused porous surfaces (SLIPS) in application

Slippery liquid-infused porous surfaces inspired by the Nepenthes pitcher plant exhibit excellent performances and are known for their extremely low contact angle hysteresis (<5°) and smooth surface. In contrast, superhydrophobic surfaces (SHS) exhibit poor pressure stability, difficulty in self-healing, and difficulty in removing low surface tension liquids or organic solvents, which can affect the stable air layer. Thus, these issues can be avoided through the replacement of SHS with slippery liquid infused porous surfaces (SLIPS). In this review, the theoretical models of SHS and SLIPS are classified initially, and several design standards for the preparation of SLIPS are briefly described. Then, we focus on comparing the differences in the application of SHS and SLIPS, such as pressure stability, transparency, and droplet manipulation. However, there are still some problems that need to be improved during the preparation of SLIPS, such as the evaporation of the lubricant layer, the use of a lubricant layer of toxic perfluoropolyether and other substances, and easily lost nanostructured lubricant layer. Accordingly, several new improved methods are proposed in this review, and finally, the potential applications and development prospects of SLIPS are presented.