Synthesis of uniform silver nanowires from AgCl seeds for transparent conductive films via spin-coating at variable spin-speed

Ultralight and Highly Conductive Silver Nanowire Aerogels for High-Performance Electromagnetic Interference Shielding

Metal-based materials possess superior electromagnetic interference (EMI) shielding performance because of their extraordinary electrical conductivity. Nevertheless, the high density and structural rigidity of metals seriously limit their applicability in portable and wearable electronic equipment. A common method for reducing the density of metal-based materials is to prepare metal nanowire aerogels by freeze-drying, but the weak connection among the nanowires results in poor mechanical and electrical properties. Herein, a facile approach is developed for the one-step synthesis of silver nanowire (AgNW) aerogels with ultralow density, good flexibility, high electrical conductivity, and a robust structure. The gel is directly formed by in situ assembly of AgNWs. The end-to-end nanojoining of AgNWs contributes to constructing an interconnected three-dimensional (3D) network, resulting in improved mechanical and electrical properties. The AgNW aerogel with an ultralow density of 4.87 mg cm^-3 demonstrates a high electrical conductivity of 4584 S m^-1. Moreover, the porous structure of the AgNW aerogel provides numerous interfaces for multiple reflections and scattering of EM waves, allowing them to be continuously absorbed and dissipated within the aerogel. Thus, the AgNW aerogel exhibits a superb EMI shielding effectiveness (SE) of 109.3 dB and a normalized surface specific SE (SSE/t, calculated as the SE divided by the density and thickness) of 353 183 dB cm² g^-1, significantly above that of previously known shielding materials. This work provides a new route for preparing high-performance metal nanowire aerogels and their great potential in EMI shielding.

All-atmospheric fabrication of Ag-Cu core-shell nanowire transparent electrodes with Haacke figure of merit >600 × 10-3 Ω-1

Transparent conducting electrodes (TCEs) are essential components in devices such as touch screens, smart windows, and photovoltaics. Metal nanowire networks are promising next-generation TCEs, but best-performing examples rely on expensive metal catalysts (palladium or platinum), vacuum processing, or transfer processes that cannot be scaled. This work demonstrates a metal nanowire TCE fabrication process that focuses on high performance and simple fabrication. Here we combined direct and plating metallization processes on electrospun nanowires. We first directly metallize silver nanowires using reactive silver ink. The silver catalyzes subsequent copper plating to produce Ag-Cu core-shell nanowires and eliminates nanowire junction resistances. The process allows for tunable transmission and sheet resistance properties by adjusting electrospinning and plating time. We demonstrate state-of-the-art, low-haze TCEs using an all-atmospheric process with sheet resistances of 0.33 Ω sq^-1 and visible light transmittances of 86% (including the substrate), leading to a Haacke figure of merit of 652 × 10^-3 Ω^-1. The core-shell nanowire electrode also demonstrates high chemical and bending durability.

Advances in constructing silver nanowire-based conductive pathways for flexible and stretchable electronics

With their soaring technological demand, flexible and stretchable electronics have attracted many researchers' attention for a variety of applications. The challenge which was identified a decade ago and still remains, however, is that the conventional electrodes based on indium tin oxide (ITO) are not suitable for ultra-flexible electronic devices. The main reason is that ITO is brittle and expensive, limiting device performance and application. Thus, it is crucial to develop new materials and processes to construct flexible and stretchable electrodes with superior quality for next-generation soft devices. Herein, various types of conductive nanomaterials as candidates for flexible and stretchable electrodes are briefly reviewed. Among them, silver nanowire (AgNW) is selected as the focus of this review, on account of its excellent conductivity, superior flexibility, high technological maturity, and significant presence in the research community. To fabricate a reliable AgNW-based conductive network for electrodes, different processing technologies are introduced, and the corresponding characteristics are compared and discussed. Furthermore, this review summarizes strategies and the latest progress in enhancing the conductive pathway. Finally, we showcase some exemplary applications and provide some perspectives about the remaining technical challenges for future research.

Optical Properties of Colloidal Silver Nanowires

Silver nanowires are used in many applications, ranging from transparent conductive layers to Raman substrates and sensors. Their performance often relies on their unique optical properties that emerge from localized surface plasmon resonances in the ultraviolet. To tailor the nanowire geometry for a specific application, a correct understanding of the relationship between the wire's structure and its optical properties is therefore necessary. However, while the colloidal synthesis of silver nanowires typically leads to structures with pentagonally twinned geometries, their optical properties are often modeled assuming a cylindrical cross-section. Here we highlight the strengths and limitations of such an approximation by numerically calculating the optical and electrical response of pentagonally twinned silver nanowires and nanowire networks. We find that our accurate modeling is crucial to deduce structural information from experimentally measured extinction spectra of colloidally synthesized nanowire suspensions and to predict the performance of nanowire-based near-field sensors. On the contrary, the cylindrical approximation is fully capable of capturing the optical and electrical performance of nanowire networks used as transparent electrodes. Our results can help assess the quality of nanowire syntheses and guide in the design of optimized silver nanowire-based devices.

Advances in Flexible Metallic Transparent Electrodes

Transparent electrodes (TEs) are pivotal components in many modern devices such as solar cells, light-emitting diodes, touch screens, wearable electronic devices, smart windows, and transparent heaters. Recently, the high demand for flexibility and low cost in TEs requires a new class of transparent conductive materials (TCMs), serving as substitutes for the conventional indium tin oxide (ITO). So far, ITO has been the most used TCM despite its brittleness and high cost. Among the different emerging alternative materials to ITO, metallic nanomaterials have received much interest due to their remarkable optical-electrical properties, low cost, ease of manufacturing, flexibility, and widespread applicability. These involve metal grids, thin oxide/metal/oxide multilayers, metal nanowire percolating networks, or nanocomposites based on metallic nanostructures. In this review, a comparison between TCMs based on metallic nanomaterials and other TCM technologies is discussed. Next, the different types of metal-based TCMs developed so far and the fabrication technologies used are presented. Then, the challenges that these TCMs face toward integration in functional devices are discussed. Finally, the various fields in which metal-based TCMs have been successfully applied, as well as emerging and potential applications, are summarized.

Improving Optoelectrical Properties of PEDOT: PSS by Organic Additive and Acid Treatment

This article demonstrates the change of structural and optical properties of poly (3,4-ethylene dioxythiophene): polystyrene sulfonate (PEDOT: PSS) by organic additive and acid treatment. The addition of sorbitol and maltitol can disperse the micelles of PEDOT: PSS. The mechanism of the bond-breaking reaction was investigated and a model for the bond-breaking reaction is also proposed. Furthermore, multiple formic acid treatments were found to reduce the PSS content of PEDOT: PSS, resulting in an enhancement in conductivity (4.2 × 104 S/m).

Electrochemical performance of a new all solid-state ultra-low noise electrospray electrode as a marine electric field sensor

A new type of Ag/AgCl electrode as a marine electric field sensor is prepared using electrospray. The surface of the electrode is porous, and the particle size of AgCl is small and uniform with an average particle size of 1.43 µm, which accelerated the speed of the oxidation-reduction reactions. Therefore, the electrode with large specific surface area has high stability and low noise. The impedance, sensitivity, self-noise, and stability of the electrode are measured to study the electrochemical performance of the electrode. The impedance of the electrode is 7.9 Ω, and the electrode shows resistance characteristics, meaning that the electrode can well receive the weak ocean electric field signals with low signal distortion. The sensitivity experiment result shows that the electrode can well restore the sinusoidal electric field signal of 1 Hz (10 mV). The voltage drift is less than 5 µV/100 h, the self-potential is between -51 and 56 µV, and the self-noise of the electrode is 2.48 nV @ 1 Hz. The AgCl layer on the surface of the electrode is porous and thick, and the particle size of AgCl is small and uniform. This makes the electrode have excellent electrochemical performance. All the experimental results show that the electrode has ultra-low noise and excellent response to low frequency weak electric field signals. The electrode is of great significance to the exploitation of marine resources as the marine electric field sensor.

Inkjet Printing of Flexible Transparent Conductive Films with Silver Nanowires Ink

The inkjet printing process is a promising electronic printing technique for large-scale, printed, flexible and stretchable electronics because of features such as its high manufacturing speed, environmental friendliness, simple process, low cost, accurate positioning, and so on. As the base material of printed conductive patterns, conductive ink is the foundation of the development of printed electronics technology, and directly affects the performance and the quality of electronic products. In this paper, conductive ink with silver nanowires (AgNWs) was prepared, with AgNWs of lengths of 2–5 µm and diameters of 20 nm or so, isopropyl alcohol and ethylene glycol as the mixed solvents, and modified polysilane as the wetting agent. We discussed the relationship between the formula of the AgNWs ink and the surface tension, viscosity, contact angle between ink droplet and poly(ethylene) terephthalate (PET) surface, as well as the film-forming properties of the ink. Further, we analyzed the effects of the number of printed layers and the ink concentration of the AgNWs on the microstructures, photoelectric properties and accuracy of the printed patterns, as well as the change in the sheet resistance of the film during different bending cycles. The experimental results show that flexible transparent conductive patterns with a light transmittance of 550 nm of 83.1–88.4% and a sheet resistance of 34.0 Ω∙sq⁻¹–78.3 nm∙sq⁻¹ can be obtained by using AgNWs ink of 0.38 mg∙mL⁻¹ to 0.57 mg∙mL⁻¹, a poly (ethylene terephthalate) (PET) substrate temperature of 40 °C, a nozzle temperature of 35 °C, and heat treated at 60 °C for 10 min. These performances indicate the excellent potential of the inkjet printing of AgNWs networks for developing flexible transparent conductive film.

Silver Nanowires as Electron Transfer Mediators in Electrochemical Catechol Biosensors

The integration of nanomaterials as electron mediators in electrochemical biosensors is taking on an essential role. Due to their high surface-to-volume ratio and high conductivity, metallic nanowires are an interesting option. In this paper, silver nanowires (AgNWs) were exploited to design a novel catechol electrochemical biosensor, and the benefits of increasing the aspect ratio of the electron mediator (nanowires vs. nanoparticles) were analyzed. Atomic force microscopy (AFM) studies have shown a homogeneous distribution of the enzyme along the silver nanowires, maximizing the contact surface. The large contact area promotes electron transfer between the enzyme and the electrode surface, resulting in a Limit of Detection (LOD) of 2.7 × 10⁻⁶ M for tyrosinase immobilized onto AgNWs (AgNWs-Tyr), which is one order of magnitude lower than the LOD of 3.2 × 10⁻⁵ M) obtained using tyrosinase immobilized onto silver nanoparticles (AgNPs-Tyr). The calculated K_M constant was 122 mM. The simultaneous use of electrochemistry and AFM has demonstrated a limited electrochemical fouling that facilitates stable and reproducible detection. Finally, the biosensor showed excellent anti-interference characteristics toward the main phenols present in wines including vanillin, pyrogallol, quercetin and catechin. The biosensor was able to successfully detect the presence of catechol in real wine samples. These results make AgNWs promising elements in nanowired biosensors for the sensitive, stable and rapid voltammetric detection of phenols in real applications.

A review on the green and sustainable synthesis of silver nanoparticles and one-dimensional silver nanostructures

The significance of silver nanostructures has been growing considerably, thanks to their ubiquitous presence in numerous applications, including but not limited to renewable energy, electronics, biosensors, wastewater treatment, medicine, and clinical equipment. The properties of silver nanostructures, such as size, size distribution, and morphology, are strongly dependent on synthesis process conditions such as the process type, equipment type, reagent type, precursor concentration, temperature, process duration, and pH. Physical and chemical methods have been among the most common methods to synthesize silver nanostructures; however, they possess substantial disadvantages and short-comings, especially compared to green synthesis methods. On the contrary, the number of green synthesis techniques has been increasing during the last decade and they have emerged as alternative routes towards facile and effective synthesis of silver nanostructures with different morphologies. In this review, we have initially outlined the most common and popular chemical and physical methodologies and reviewed their advantages and disadvantages. Green synthesis methodologies are then discussed in detail and their advantages over chemical and physical methods have been noted. Recent studies are then reviewed in detail and the effects of essential reaction parameters, such as temperature, pH, precursor, and reagent concentration, on silver nanostructure size and morphology are discussed. Also, green synthesis techniques used for the synthesis of one-dimensional (1D) silver nanostructures have been reviewed, and the potential of alternative green reagents for their synthesis has been discussed. Furthermore, current challenges regarding the green synthesis of 1D silver nanostructures and future direction are outlined. To sum up, we aim to show the real potential of green nanotechnology towards the synthesis of silver nanostructures with various morphologies (especially 1D ones) and the possibility of altering current techniques towards more environmentally friendly, more energy-efficient, less hazardous, simpler, and cheaper procedures.

Spin Coating Immobilisation of C-N-TiO2 Co-Doped Nano Catalyst on Glass and Application for Photocatalysis or as Electron Transporting Layer for Perovskite Solar Cells

Producing active thin films coated on supports resolves many issues of powder-based photo catalysis and energy harvesting. In this study, thin films of C-N-TiO2 were prepared by dynamic spin coating of C-N-TiO2 sol-gel on glass support. The effect of spin speed and sol gel precursor to solvent volume ratio on the film thickness was investigated. The C-N-TiO2-coated glass was annealed at 350 °C at a ramping rate of 10 °C/min with a holding time of 2 hours under a continuous flow of dry N2. The C-N-TiO2 films were characterised by profilometry analysis, light microscopy (LM), and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS). The outcomes of this study proved that a spin coating technique followed by an annealing process to stabilise the layer could be used for immobilisation of the photo catalyst on glass. The exposure of C-N-TiO2 films to UV radiation induced photocatalytic decolouration of orange II (O.II) dye. The prepared C-N-TiO2 films showed a reasonable power conversion efficiency average (PCE of 9%) with respect to the reference device (15%). The study offers a feasible route for the engineering of C-N-TiO2 films applicable to wastewater remediation processes and energy harvesting in solar cell technologies.

Simple and Fast High-Yield Synthesis of Silver Nanowires

Silver nanowires (AgNWs) combine high electrical conductivity with low light extinction in the visible and are used in a wide range of applications, from transparent electrodes, to temperature and pressure sensors. The most common strategy for the production of AgNWs is the polyol synthesis, which always leads to the formation of silver nanoparticles as byproducts. These nanoparticles degrade the performance of AgNWs' based devices and have to be eliminated by several purification steps. Here, we report a simple and fast synthesis of AgNWs with minimal formation of byproducts, as confirmed by the spectral purity of the final solution. Our synthetic strategy relies on the use of freshly prepared AgCl and on the minimization of gas evolution inside the reaction vessel. The observed synthetic improvements can be of general validity for the polyol synthesis of metallic nanostructures of different shapes and compositions.

Lipid Nanotubes as an Organic Template for an Electrically Conductive Gold Nanostructure Network

We demonstrate an approach to fabricate a gold nanowire network that presents a macroscopic electrical conductivity based on a lipid nanotube (LNT) template with attached gold nanoparticles. The poor electrical conductivity that we have previously faced was overcome by centrifugation and resuspension of gold nanoparticle solution for removing stabilizing agents, which increased the density of gold nanoparticles on the LNTs. An additional electroless metal plating further enhanced their contacts at nanoscale. Thanks to these procedures, the sheet resistance was improved by 11 orders of magnitude. As a proof of principle, transparent conductive films were fabricated with these gold nanowires, which exhibited sheet resistance of maximum 70 Ω/□ and transmittance of 50-75% in visible light.

A facile synthesis of silver nanowires and their evaluation in the mitochondrial membrane potential

Silver nanowires (AgNWs) with a high-aspect-ratio were successfully synthesized by a green method using Lavandula angustifolia plant extract. The morphology of the AgNWs was evaluated as a function of the concentration of precursor salt and nucleating agent. Furthermore, AgNWs were analyzed in a biological model using rat liver mitochondria by measuring their effect on membrane potential. The scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM) techniques structurally characterized the nanowires obtained. Also, ultraviolet-visible spectroscopy (UV-Vis) investigated the optical properties of AgNWs. Structural studies show AgNWs fcc with lengths up to 100 μm and diameters ranging from 60 to 130 nm growing in the [110] orientation. Both the CuSO₄ nucleating agent and the centrifugation process are essential for the growth of nanowires. Furthermore, inhibition of mitochondrial membrane potential (MMP) depends on the concentration of the nanowires (NWs), suggesting dissipation of the electron transport chain. In this way, AgNWs can be used as a potential tool to verify biological reactions, such as modulation of metabolic pathways, together with the evaluation of a possible influence of biotic or abiotic factors in organisms.

Ultra-Uniform and Very Thin Ag Nanowires Synthesized via the Synergy of Cl-, Br- and Fe3+ for Transparent Conductive Films

The properties and applications of Ag nanowires (AgNWs) are closely related to their morphology and composition. Therefore, controlling the growth process of AgNWs is of great significance for technological applications and fundamental research. Here, silver nanowires (AgNWs) were synthesized via a typical polyol method with the synergistic effect of Cl⁻, Br⁻, and Fe³⁺ mediated agents. The synergistic impact of these mediated agents was investigated intensively, revealing that trace Fe³⁺ ions provided selective etching and hindered the strong etching effect from Cl⁻ and Br⁻ ions. Controlling this synergy allowed the obtainment of highly uniform AgNWs with sub-30 nm diameter and an aspect ratio of over 3000. Transparent conductive films (TCFs) based on these AgNWs without any post-treatment showed a very low sheet resistance of 4.7 Ω sq⁻¹, a low haze of 1.08% at a high optical transmittance of 95.2% (at 550 nm), and a high figure of merit (FOM) of 1210. TCFs exhibited a robust electrical performance with almost unchanged resistance after 2500 bending cycles. These excellent high-performance characteristics demonstrate the enormous potential of our AgNWs in the field of flexible and transparent materials.

Synthesis and Applications of Silver Nanowires for Transparent Conductive Films

Flexible transparent conductive electrodes (TCEs) are widely applied in flexible electronic devices. Among these electrodes, silver (Ag) nanowires (NWs) have gained considerable interests due to their excellent electrical and optical performances. Ag NWs with a one-dimensional nanostructure have unique characteristics from those of bulk Ag. In past 10 years, researchers have proposed various synthesis methods of Ag NWs, such as ultraviolet irradiation, template method, polyol method, etc. These methods are discussed and summarized in this review, and we conclude that the advantages of the polyol method are the most obvious. This review also provides a more comprehensive description of the polyol method for the synthesis of Ag NWs, and the synthetic factors including AgNO3 concentration, addition of other metal salts and polyvinyl pyrrolidone are thoroughly elaborated. Furthermore, several problems in the fabrication of Ag NWs-based TCEs and related devices are reviewed. The prospects for applications of Ag NWs-based TCE in solar cells, electroluminescence, electrochromic devices, flexible energy storage equipment, thin-film heaters and stretchable devices are discussed and summarized in detail.