The bifunctional composites of AC restrain the stack of g-C3N4 with the excellent adsorption-photocatalytic performance for the removal of RhB

Fabrication of a Nanosized g-C3N4-Loaded Cellulose Microfiber Bundle to Induce Highly Efficient Water Treatment via Photodegradation

Graphite carbon nitride (g-C3N4) with a suitable structure and strong amine activity is designed and prepared to serve as a hydrogen bond donor for the microfibrilization of corncob cellulose to form a cellulose microfiber (CMF) bundle. Simultaneously, well-dispersed nanosized g-C3N4 is loaded into the bundle to form a photocatalyst for efficient photodegradation of rhodamine B (Rh B) in water. Under the optimal preparation conditions at 165 °C, 10 min, and 0.08 mol/L H2SO4, the yield of g-C3N4-functionalized cellulose microfibers (CMF-g-C3N4) reaches to the highest over 70%. The catalytic rate of CMF-g-C3N4 is 3.3 times larger than that of pure g-C3N4. The degradation rate of Rh B is maintained at over 90% in 10 cycles of photocatalytic degradation. The obtained CMF-g-C3N4 also has good thermal stability and mechanical properties. This research suggests a particularly simple way to transform cellulose into a highly efficient photocatalyst for water treatment.

The Synergistic Effect of Adsorption-Photocatalysis for Removal of Organic Pollutants on Mesoporous Cu2V2O7/Cu3V2O8/g-C3N4 Heterojunction

Cu₂V₂O₇/Cu₃V₂O₈/g-C₃N₄ heterojunctions (CVCs) were prepared successfully by the reheating synthesis method. The thermal etching process increased the specific surface area. The formation of heterojunctions enhanced the visible light absorption and improved the separation efficiency of photoinduced charge carriers. Therefore, CVCs exhibited superior adsorption capacity and photocatalytic performance in comparison with pristine g-C₃N₄ (CN). CVC-2 (containing 2 wt% of Cu₂V₂O₇/Cu₃V₂O₈) possessed the best synergistic removal efficiency for removal of dyes and antibiotics, in which 96.2% of methylene blue (MB), 97.3% of rhodamine B (RhB), 83.0% of ciprofloxacin (CIP), 86.0% of tetracycline (TC) and 80.5% of oxytetracycline (OTC) were eliminated by the adsorption and photocatalysis synergistic effect under visible light irradiation. The pseudo first order rate constants of MB and RhB photocatalytic degradation on CVC-2 were 3 times and 10 times that of pristine CN. For photocatalytic degradation of CIP, TC and OTC, it was 3.6, 1.8 and 6.1 times that of CN. DRS, XPS VB and ESR results suggested that CVCs had the characteristics of a Z-scheme photocatalytic system. This study provides a reliable reference for the treatment of real wastewater by the adsorption and photocatalysis synergistic process.

Effective Removal of Methylene Blue on EuVO4/g-C3N4 Mesoporous Nanosheets via Coupling Adsorption and Photocatalysis

In this study, we first manufactured ultrathin g-C₃N₄ (CN) nanosheets by thermal etching and ultrasonic techniques. Then, EuVO₄ (EV) nanoparticles were loaded onto CN nanosheets to form EuVO₄/g-C₃N₄ heterojunctions (EVCs). The ultrathin and porous structure of the EVCs increased the specific surface area and reaction active sites. The formation of the heterostructure extended visible light absorption and accelerated the separation of charge carriers. These two factors were advantageous to promote the synergistic effect of adsorption and photocatalysis, and ultimately enhanced the adsorption capability and photocatalytic removal efficiency of methylene blue (MB). EVC-2 (2 wt% of EV) exhibited the highest adsorption and photocatalytic performance. Almost 100% of MB was eliminated via the adsorption–photocatalysis synergistic process over EVC-2. The MB adsorption capability of EVC-2 was 6.2 times that of CN, and the zero-orderreaction rate constant was 5 times that of CN. The MB adsorption on EVC-2 followed the pseudo second-order kinetics model and the adsorption isotherm data complied with the Langmuir isotherm model. The photocatalytic degradation data of MB on EVC-2 obeyed the zero-order kinetics equation in 0–10 min and abided by the first-order kinetics equation for10–30 min. This study provided a promising EVC heterojunctions with superior synergetic effect of adsorption and photocatalysis for the potential application in wastewater treatment.

Biomass porous carbon as the active site to enhance photodegradation of oxytetracycline on mesoporous g-C3N4

Graphitic carbon nitride (g-C3N4) is widely used in photocatalytic adsorption and degradation of pollutants, but there are still some problems such as low adsorption performance and high electron-hole recombination efficiency. Herein, we propose a new molten salt assisted thermal polycondensation strategy to synthesize biomass porous carbon (BPC) loaded on g-C3N4 composites (designated as BPC/g-C3N4) with a hollow tubular structure, which had a high surface area and low electron-hole recombination rate. The study shows that the morphology of g-C3N4 changes dramatically from massive to hollow tubular by molten salt assisted thermal polycondensation, which provides a base for the loading of BPC, to construct a highly effective composite photocatalyst. BPC loaded on g-C3N4 could be used as the active site to enhance Oxytetracycline (OTC) removal efficiency by adsorption and with higher electron-hole separation efficiency. As a result, the BPC(5%)/g-C3N4 sample presented the highest photocatalytic degradation efficiency (84%) for OTC degradation under visible light irradiation. The adsorption capacity and photocatalytic reaction rate were 3.67 and 5.63 times higher than that of the g-C3N4, respectively. This work provided a new insight for the design of novel composite photocatalysts with high adsorption and photocatalytic performance for the removal of antibiotic pollutants from wastewater.

Interfacial interaction of graphitic carbon nitride/nanodiamond nanocomposites toward synergistic enhancement of photocatalytic degradation of organic contaminants

Graphitic carbon nitride (g-C₃N₄) has been widely used in various photocatalyst applications. However, compared with conventional metal-based photocatalysts, it exhibits low photocatalytic activity because of the low mobility of its charge carriers. In this study, g-C₃N₄/nanodiamond (ND) nanocomposites were fabricated via a facile single-step heating strategy. Under visible-light irradiation, the optimal g-C₃N₄/ND nanocomposites with 1.0 wt% ND content exhibited an RhB degradation rate more than two times greater than that of the g-C₃N₄. In addition, reutilization experiments showed that the g-C₃N₄/ND nanocomposites exhibit good stability and reusability. This remarkable enhancement of the photocatalytic activity was attributed to the interfacial effect between g-C₃N₄ and ND, which reduces energy-wasteful electron-hole recombination and promotes charge-separation efficiency. Such an approach could accelerate the development of composites for photocatalyst applications and provide more rational guidance and fundamental understanding toward realizing the theoretical limits of interfaces.

High-efficiency adsorption of Cr(VI) and RhB by hierarchical porous carbon prepared from coal gangue

Coal gangue (CG) is one of the largest industrial solid wastes in the world produced during the process of coal mining. The accumulation of CG is easy to cause ion leakage, which is harmful to the environment and human body. The recovery and utilization of CG are imminent. In the process, a hierarchical porous carbon (HPC) adsorbent with excellent adsorption property for Cr(VI) and rhodamine B (RhB), was prepared from CG by a two-step method and characterized by SEM, TEM, XRD, XPS, TPD and BET. The results revealed that the specific surface area of HPC is up to 2012.7 m² g^-1, and its adsorption capacities for Cr(VI) and RhB are reached 320.51 and 3086.42 mg g^-1. The adsorption mechanism of RhB was the synergetic effect of physics and chemistry. While XPS results suggested that hierarchical porous carbons (HPCs) only have a chemisorption effect on Cr(VI). This study provided an idea for the preparation of HPCs from CG to remove inorganic and organic pollutants such as heavy metal Cr(VI) and RhB in water.

Disassembly of lignocellulose into cellulose, hemicellulose, and lignin for preparation of porous carbon materials with enhanced performances

Lignocellulose is the primary component of many biomasses, including corn straw. Herein, lignocellulose in corn straw was disassembled into the individual polymers, cellulose, hemicellulose, and lignin via a mild and facile method. Subsequently, three porous carbon materials were prepared by carbonization and chemical activation of cellulose (PCCC), hemicellulose (PCHC), and lignin (PCLC). The three materials showed higher specific surface areas (2565.7, 2996.1, and 2590.3 m² g^-1) and higher porosities (1.4261, 1.5876, and 1.2406 cm³ g^-1) than that of PCCS, a porous carbon material derived from raw corn straw (1993 m² g^-1 and 1.19 cm³ g^-1). Of note, PCCC and PCHC exhibited higher adsorption (1025.5 and 950.1 mg g^-1) of brilliant green (BG), than PCCS (876.7 mg g^-1). Besides, the BG adsorption capacities of the designed materials were higher than that of most adsorbents, and 2-2.5 times higher than that of graphite oxide (416.7 mg g^-1). These study results indicate that the disassembly of lignocellulosic biomass into cellulose, hemicellulose, and lignin is an effective strategy for preparing various porous carbon materials with enhanced performances.

Study on the co-effect of maifanite-based photocatalyst and humic acid in the photodegradation of organic pollutant

In this study, the co-effect of clay mineral-based photocatalyst and humic acid on the photodegradation of dye was revealed for the first time. The clay mineral-based photocatalyst, maifanite/g-C₃N₄, was prepared using the co-calcining method. The physical and chemical properties of the maifanite/g-C₃N₄ photocatalysts with various ratios were characterized by multiple characterization methods, including SEM, XPS, BET, UV-Vis, FTIR, contact angle, and XRD. The respective degradation experiment of humic acid and RhB was performed using maifanite/g-C₃N₄ photocatalysts. The degradation process of mixture solution of humic acid and RhB was measured using EEM and UV-vis. The result indicates that in the presence of humic acid, low ratio of maifanite/g-C₃N₄ inhibits the production of by-products derived from the interaction of humic acid and the degradation of RhB. However, high ratio of maifanite/g-C₃N₄ is not conducive to the degradation of RhB. The ratio of 1:3 for maifanite/g-C₃N₄ is optimal for the photodegradation of RhB in the presence of humic acid. This article provides a new perspective to develop the co-effect of clay mineral and humic acid in the photodegradation of organic pollutant.

Improved in Situ Synthesis of Heterostructured 2D/2D BiOCl/g-C3N4 with Enhanced Dye Photodegradation under Visible-Light Illumination

A simple, in situ, and one-pot hydrothermal strategy was applied for the successful manufacturing of heterostructured 2D/2D BiOCl/g-C3N4 photocatalysts, and outstanding photodegradation of Rhodamine B in the condition of visible-light irradiation over the composites emerged. The investigation of various BiOCl/g-C3N4 ratios influencing the activity implied that the optimized B2C1 (mole ratio of BiOCl/g-C3N4 with 2:1) exhibited the higher degradation efficiency than that of the rest of the composites, even higher than that of pure BiOCl and pure g-C3N4, which yielded over 90% in the initial 30 min and reached almost 100% during the whole 70 min irradiation process. Kinds of characterizations demonstrated that the enhancement of photodegradation performance was caused by the intimate contact between BiOCl and g-C3N4 to form the heterostructure, which could benefit the generation of abundant visible-light photoinduced carriers and help enhance their separation and then promote their transportation to the surface.