Green synthesis of zirconia nanoparticles based on Euclea natalensis plant extract: Optimization of reaction conditions and evaluation of adsorptive properties

Adsorption of contaminants by nanomaterials synthesized by green and conventional routes: a critical review

Nanomaterials, due to their large surface area and selectivity, have stood out as an alternative for the adsorption of contaminants from water and effluents. Synthesized from green or traditional protocols, the main advantages and disadvantages of green nanomaterials are the elimination of the use of toxic chemicals and difficulty of reproducing the preparation of nanomaterials, respectively, while traditional nanomaterials have the main advantage of being able to prepare nanomaterials with well-defined morphological properties and the disadvantage of using potentially toxic chemicals. Thus, based on the particularities of green and conventional nanomaterials, this review aims to fill a gap in the literature on the comparison of the synthesis, morphology, and application of these nanomaterials in the adsorption of contaminants in water. Focusing on the adsorption of heavy metals, pesticides, pharmaceuticals, dyes, polyaromatic hydrocarbons, and phenol derivatives in water, for the first time, a review article explored and compared how chemical and morphological changes in nanoadsorbents synthesized by green and conventional protocols affect performance in the adsorption of contaminants in water. Despite advances in the area, there is still a lack of review articles on the topic.

Prospective in vitro A431 cell line anticancer efficacy of zirconia nanoflakes derived from Enicostemma littorale aqueous extract

Biomedical applications of zirconia nanomaterials were limited in biological systems. In this research, 8-15 nm size zirconia nanoflakes (ZrNFs) were fabricated and their nature, morphology, and biocompatibility were evaluated. The synthesis was carried out using Enicostemma littorale plant extract as an effective reducing and capping agent. Physiochemical properties of prepared ZrNFs were characterized using diverse instrumental studies such as UV-vis spectrophotometer, Fourier-transform infrared, powder X-ray diffractometer, scanning electron microscope, transmission electron microscope (TEM), energy dispersive X-ray, and cyclic voltammetry (CV). The XRD pattern confirmed the tetragonal phases of ZrNFs and the highest crystallite size of Zr0.02, Zr0.02, and Zr0.06 was 56, 50, and 44 nm, respectively. The morphology of samples was assessed using TEM. Electrophysiological effects of ZrNFs in the cellular interaction process were revealed by the slower rate of electron transfer results in CV demonstration. Biocompatibility of synthesized ZrNFs was studied on A431 human epidermoid carcinoma epithelial cells. The cell viability was increased with an increasing the concentration of nanoflakes up to 6.50-100 μg/mL. The cell viability and observed IC50 values (44.25, 36.49, and 39.62 μg/mL) reveals that the synthesized ZrNFs using E. littorale extract is found to be efficient toxic to A431 cancer cell lines.

Green synthesis of Fe3O4 nanoparticles using Alliaceae waste (Allium sativum) for a sustainable landscape enhancement using support vector regression

The synthesis of metal nanoparticles using green chemistry methods has gained significant attention in the field of landscape enhancement. Researchers have paid close attention to the development of very effective green chemistry approaches for the production of metal nanoparticles (NPs). The primary goal is to create an environmentally sustainable technique for generating NPs. At the nanoscale, ferro- and ferrimagnetic minerals such as magnetite exhibit superparamagnetic properties (Fe3O4). Magnetic nanoparticles (NPs) have received increased interest in nanoscience and nanotechnology due to their physiochemical properties, small particle size (1-100 nm), and low toxicity. Biological resources such as bacteria, algae, fungus, and plants have been used to manufacture affordable, energy-efficient, non-toxic, and ecologically acceptable metallic NPs. Despite the growing demand for Fe3O4 nanoparticles in a variety of applications, typical chemical production processes can produce hazardous byproducts and trash, resulting in significant environmental implications. The purpose of this study is to look at the ability of Allium sativum, a member of the Alliaceae family recognized for its culinary and medicinal benefits, to synthesize Fe3O4 NPs. Extracts of Allium sativum seeds and cloves include reducing sugars like glucose, which may be used as decreasing factors in the production of Fe3O4 NPs to reduce the requirement for hazardous chemicals and increase sustainability. The analytic procedures were carried out utilizing machine learning as support vector regression (SVR). Furthermore, because Allium sativum is widely accessible and biocompatible, it is a safe and cost-effective material for the manufacture of Fe3O4 NPs. Using the regression indices metrics of root mean square error (RMSE) and coefficient of determination (R2), the X-ray diffraction (XRD) study revealed the lighter, smoother spherical forms of NPs in the presence of aqueous garlic extract and 70.223 nm in its absence. The antifungal activity of Fe3O4 NPs against Candida albicans was investigated using a disc diffusion technique but exhibited no impact at doses of 200, 400, and 600 ppm. This characterization of the nanoparticles helps in understanding their physical properties and provides insights into their potential applications in landscape enhancement.

A critical review on the bio-mediated green synthesis and multiple applications of magnesium oxide nanoparticles

Nowadays, advancements in nanotechnology have efficiently solved many global problems, such as environmental pollution, climate change, and infectious diseases. Nano-scaled materials have played a central role in this evolution. Chemical synthesis of nanomaterials, however, required hazardous chemicals, unsafe, eco-unfriendly, and cost-ineffective, calling for green synthesis methods. Here, we review the green synthesis of MgO nanoparticles and their applications in biochemical, environmental remediation, catalysis, and energy production. Green MgO nanoparticles can be safely produced using biomolecules extracted from plants, fungus, bacteria, algae, and lichens. They exhibited fascinating and unique properties in morphology, surface area, particle size, and stabilization. Green MgO nanoparticles served as excellent antimicrobial agents, adsorbents, colorimetric sensors, and had enormous potential in biomedical therapies against cancers, oxidants, diseases, and the sensing detection of dopamine. In addition, green MgO nanoparticles are of great interests in plant pathogens, phytoremediation, plant cell and organ culture, and seed germination in the agricultural sector. This review also highlighted recent advances in using green MgO nanoparticles as nanocatalysts, nano-fertilizers, and nano-pesticides. Thanks to many emerging applications, green MgO nanoparticles can become a promising platform for future studies.

Peppermint-Mediated Green Synthesis of Nano ZrO2 and Its Adsorptive Removal of Cobalt from Water

Zirconium oxide nanoparticles (ZrO2NPs) were green synthesized for the first time using an aqueous peppermint extract as a precipitating and capping agent. Addition of the extract to Zr4+ solution was followed by calcination of the resulting precipitate at 570 and 700 °C to form ZrO2NPs570 and ZrO2NPs700, respectively. These oxides were characterized using X-ray diffraction, transmission electron microscopy, and BET surface area analysis, and used as adsorbents for cobalt ions (Co2+) in water. The effects of pH, initial Co2+ concentration, ZrO2NPs mass, and contact time on adsorption efficiency were studied. Characterization results showed formation of cubic ZrO2 with average crystallite sizes (XRD data) of 6.27 and 7.26 nm for ZrO2NPs570 and ZrO2NPs700, respectively. TEM images of the two oxides exhibited nearly spherical nanoparticles and BET surface area measurements indicated the formation of mesoporous oxides having surface areas of 94.8 and 62.4 m2/g, respectively. The results of the adsorption study confirmed that the synthesized ZrO2NPs can be efficiently used for the adsorption of Co2+ from water. The uptake of Co2+ from the treated solution is favored at pH values higher than its point of zero charge (6.0). In addition, the adsorption of Co2+ by ZrO2 follows a pseudo-second order kinetics (R2 = 1.0) and can be explained by the Langmuir adsorption isotherm (R2 = 0.973).

Zirconia-based nanomaterials: recent developments in synthesis and applications

In the last decade, the whole scientific community has witnessed great advances and progress in the various fields of nanoscience. Among the different nanomaterials, zirconia nanomaterials have found numerous applications as nanocatalysts, nanosensors, adsorbents, etc. Additionally, their exceptional biomedical applications in dentistry and drug delivery, and interesting biological properties, viz. anti-microbial, antioxidant, and anti-cancer activity, have further motivated the researchers to explore their physico-chemical properties using different synthetic pathways. With such an interest in zirconia-based nanomaterials, the present review focuses systematically on different synthesis approaches and their impact on the structure, size, shape, and morphology of these nanomaterials. Broadly, there are two approaches, viz., chemical synthesis which includes hydrothermal, solvothermal, sol-gel, microwave, solution combustion, and co-precipitation methods, and a greener approach which employs bacteria, fungus, and plant parts for the preparation of zirconia nanoparticles. In this review article, the aforementioned methods have been critically analyzed for obtaining specific phases and shapes. The review also incorporates a detailed survey of the applications of zirconia-based nanomaterials. Furthermore, the influence of specific phases, morphology, and the comparison with their counterpart composites for different applications have also been included. Finally, the concluding remarks, prospects and possible scope are given in the last section.

Green synthesis of P − ZrO2CeO2ZnO nanoparticles using leaf extracts of Flacourtia indica and their application for the photocatalytic degradation of a model toxic dye, Congo red

In the present work P−ZrO2CeO2ZnO nanoparticles were synthesised for the first time using phytochemical extracts from Flacourtia indica leaves and applied in the photocatalytic degradation of Congo Red in the presence of Light Emitting Diode warm white light. The photocatalytic degradation was optimized with respect to P−ZrO2CeO2ZnO nanoparticle dosage, initial Congo Red concentration, and degradation time. The optimum conditions for P−ZrO2CeO2ZnO nanoparticle synthesis was pH 9, leaves extracts of F. indica dosage 4 g 100 mL⁻¹, Zirconia, Cerium and Zinc metal ion concentration 0.05 mg/L and metal ion to plant volume ratio of 1:4. The leaves extract dosage, pH and metal concentration had the most significant effects on the synthesis of the nanoparticles. The nanoparticles followed type III physisorption adsorption isotherms with surface area of 0.4593 m³g⁻¹, pore size of 6.80 nm, pore volume 0.000734 cmg−13 and average nanoparticle size 0.255 nm. A degradation efficiency of 86% was achieved and the optimum degradation conditions were 0.05 g/L of P−ZrO2CeO2ZnO nanoparticle dosage, 10 mg/L initial Congo red concentration, and 250 minutes irradiation time. Data from kinetic studies showed that the degradation followed pseudo first order kinetics at low concentration, with a rate constant of 0.069 min⁻¹. The superoxide, h+ holes and light were the main determinants of the reaction mechanisms for the degradation of Congo Red. The investigation outcomes demonstrated that P−ZrO2CeO2ZnO nanoparticles offer a high potential for photocatalytic degradation of Congo Red.

•

The most significant factors on P−ZrO2CeO2ZnO nanoparticles synthesis were plant leaves dosage, pH and initial metal concentration.

•

The nanoparticles exhibited high catalytic activity towards photocatalytic degradation of Congo red.

•

Superoxide, h+ holes and light were the main determinants of the photocatalytic degradation mechanisms.

Recent advances on botanical biosynthesis of nanoparticles for catalytic, water treatment and agricultural applications: A review

Green synthesis of nanoparticles using plant extracts minimizes the usage of toxic chemicals or energy. Here, we concentrate on the green synthesis of nanoparticles using natural compounds from plant extracts and their applications in catalysis, water treatment and agriculture. Polyphenols, flavonoid, rutin, quercetin, myricetin, kaempferol, coumarin, and gallic acid in the plant extracts engage in the reduction and stabilization of green nanoparticles. Ten types of nanoparticles involving Ag, Au, Cu, Pt, CuO, ZnO, MgO, TiO₂, Fe₃O₄, and ZrO₂ with emphasis on their formation mechanism are illuminated. We find that green nanoparticles serve as excellent, and recyclable catalysts for reduction of nitrophenols and synthesis of organic compounds with high yields of 83-100% and at least 5 recycles. Many emerging pollutants such as synthetic dyes, antibiotics, heavy metal and oils are effectively mitigated (90-100%) using green nanoparticles. In agriculture, green nanoparticles efficiently immobilize toxic compounds in soil. They are also sufficient nanopesticides to kill harmful larvae, and nanoinsecticides against dangerous vectors of pathogens. As potential nanofertilizers and nanoagrochemicals, green nanoparticles will open a revolution in green agriculture for sustainable development.

Green Synthesis of Metal Oxides Semiconductors for Gas Sensing Applications

During recent decades, metal oxide semiconductors (MOS) have sparked more attention in various applications and industries due to their excellent sensing characteristics, thermal stability, abundance, and ease of synthesis. They are reliable and accurate for measuring and monitoring environmentally important toxic gases, such as NO₂, NO, N₂O, H₂S, CO, NH₃, CH₄, SO₂, and CO₂. Compared to other sensing technologies, MOS sensors are lightweight, relatively inexpensive, robust, and have high material sensitivity with fast response times. Green nanotechnology is a developing branch of nanotechnology and aims to decrease the negative effects of the production and application of nanomaterials. For this purpose, organic solvents and chemical reagents are not used to prepare metal nanoparticles. On the contrary, the synthesis of metal or metal oxide nanoparticles is done by microorganisms, either from plant extracts or fungi, yeast, algae, and bacteria. Thus, this review aims at illustrating the possible green synthesis of different metal oxides such as ZnO, TiO₂, CeO₂, SnO₂, In₂O₃, CuO, NiO, WO_3, and Fe₃O₄, as well as metallic nanoparticles doping.

Green synthesis of Zirconium nanoparticles using Punica granatum (pomegranate) peel extract and their antimicrobial and antioxidant potency

The biosynthesis of metal oxide nanoparticles provides an excellent alternative to the chemical synthesis approach. The aim of the current study was a green and eco-friendly synthesis of zirconium nanoparticles (ZrNPs) from fruit peels of Punica granatum (Pomegranate). The synthesis of ZrNPs was confirmed using a UV-visible spectrophotometer. The functional groups present on surface of ZrNPs were analyzed using FTIR. The average size of obtained ZrNPs was analyzed using SEM and DLS and it was around 20-60 nm. The antimicrobial activity of obtained ZrNPs was tested against Gram-positive strains (Bacillus subtilis and Staphylococcus aureus), Gram-negative strains (Escherichia coli and Klebsiella pneumoniae) and Fungi (Aspergillus niger) by agar well diffusion method. ZrNPs showed maximum zone of inhibition against S. aureus (19 mm) and A. niger (18 mm) at the maximum concentration of 200 μg/mL. The antioxidant scavenging activity of obtained ZrNPs was analyzed using the following methods: DPPH radical scavenging activity, Hydroxyl radical scavenging activity, Ferric reducing antioxidant power and hydrogen peroxide radical scavenging activity. This the first and foremost study on ZrNPs synthesized using P. granatum fruit peel extract reporting their efficacy as antimicrobial agents against Bacteria and Fungi. Considering the tolerance of zirconium towards human body, it can also be used as antimicrobial coating material on human implants.

A Review on Current Designation of Metallic Nanocomposite Hydrogel in Biomedical Applications

In the past few decades, nanotechnology has been receiving significant attention globally and is being continuously developed in various innovations for diverse applications, such as tissue engineering, biotechnology, biomedicine, textile, and food technology. Nanotechnological materials reportedly lack cell-interactive properties and are easily degraded into unfavourable products due to the presence of synthetic polymers in their structures. This is a major drawback of nanomaterials and is a cause of concern in the biomedicine field. Meanwhile, particulate systems, such as metallic nanoparticles (NPs), have captured the interest of the medical field due to their potential to inhibit the growth of microorganisms (bacteria, fungi, and viruses). Lately, researchers have shown a great interest in hydrogels in the biomedicine field due to their ability to retain and release drugs as well as to offer a moist environment. Hence, the development and innovation of hydrogel-incorporated metallic NPs from natural sources has become one of the alternative pathways for elevating the efficiency of therapeutic systems to make them highly effective and with fewer undesirable side effects. The objective of this review article is to provide insights into the latest fabricated metallic nanocomposite hydrogels and their current applications in the biomedicine field using nanotechnology and to discuss the limitations of this technology for future exploration. This article gives an overview of recent metallic nanocomposite hydrogels fabricated from bioresources, and it reviews their antimicrobial activities in facilitating the demands for their application in biomedicine. The work underlines the fabrication of various metallic nanocomposite hydrogels through the utilization of natural sources in the production of biomedical innovations, including wound healing treatment, drug delivery, scaffolds, etc. The potential of these nanocomposites in relation to their mechanical strength, antimicrobial activities, cytotoxicity, and optical properties has brought this technology into a new dimension in the biomedicine field. Finally, the limitations of metallic nanocomposite hydrogels in terms of their methods of synthesis, properties, and outlook for biomedical applications are further discussed.

Green synthesis of ZrO2 nanoparticles and nanocomposites for biomedical and environmental applications: a review

Pollution and diseases such as the coronavirus pandemic (COVID-19) are major issues that may be solved partly by nanotechnology. Here we review the synthesis of ZrO₂ nanoparticles and their nanocomposites using compounds from bacteria, fungi, microalgae, and plants. For instance, bacteria, microalgae, and fungi secret bioactive metabolites such as fucoidans, digestive enzymes, and proteins, while plant tissues are rich in reducing sugars, polyphenols, flavonoids, saponins, and amino acids. These compounds allow reducing, capping, chelating, and stabilizing during the transformation of Zr⁴⁺ into ZrO₂ nanoparticles. Green ZrO₂ nanoparticles display unique properties such as a nanoscale size of 5-50 nm, diverse morphologies, e.g. nanospheres, nanorods and nanochains, and wide bandgap energy of 3.7-5.5 eV. Their high stability and biocompatibility are suitable biomedical and environmental applications, such as pathogen and cancer inactivation, and pollutant removal. Emerging applications of green ZrO₂-based nanocomposites include water treatment, catalytic reduction, nanoelectronic devices, and anti-biofilms.

Green Synthesis of Metal and Metal Oxide Nanoparticles: Principles of Green Chemistry and Raw Materials

Increased request for metal and metal oxide nanoparticles nanoparticles has led to their large-scale production using high-energy methods with various toxic solvents. This cause environmental contamination, thus eco-friendly “green” synthesis methods has become necessary. An alternative way to synthesize metal nanoparticles includes using bioresources, such as plants and plant products, bacteria, fungi, yeast, algae, etc. “Green” synthesis has low toxicity, is safe for human health and environment compared to other methods, meaning it is the best approach for obtaining metal and metal oxide nanoparticles. This review reveals 12 principles of “green” chemistry and examples of biological components suitable for “green” synthesis, as well as modern scientific research of eco-friendly synthesis methods of magnetic and metal nanoparticles. Particularly, using extracts of green tea, fruits, roots, leaves, etc., to obtain Fe3O4 NPs. The various precursors as egg white (albumen), leaf and fruit extracts, etc., can be used for the „green” synthesis of spinel magnetic NPs. “Green” nanoparticles are being widely used as antimicrobials, photocatalysts and adsorbents. “Green” magnetic nanoparticles demonstrate low toxicity and high biocompatibility, which allows for their biomedical application, especially for targeted drug delivery, contrast imaging and magnetic hyperthermia applications. The synthesis of silver, gold, platinum and palladium nanoparticles using extracts from fungi, red algae, fruits, etc., has been described.

Integrating biometallurgical recovery of metals with biogenic synthesis of nanoparticles

Industrial activities, such as mining, electroplating, cement production, and metallurgical operations, as well as manufacturing of plastics, fertilizers, pesticides, batteries, dyes or anticorrosive agents, can cause metal contamination in the surrounding environment. This is an acute problem due to the non-biodegradable nature of metal pollutants, their transformation into toxic and carcinogenic compounds, and bioaccumulation through the food chain. At the same time, platinum group metals and rare earth elements are of strong economic interest and their recovery is incentivized. Microbial interaction with metals or metals-bearing minerals can facilitate metals recovery in the form of nanoparticles. Metal nanoparticles are gaining increasing attention due to their unique characteristics and application as antimicrobial and antibiofilm agents, biocatalysts, in targeted drug delivery, for wastewater treatment, and in water electrolysis. Ideally, metal nanoparticles should be homogenous in shape and size, and not toxic to humans or the environment. Microbial synthesis of nanoparticles represents a safe, and environmentally friendly alternative to chemical and physical methods. In this review article, we mainly focus on metal and metal salts nanoparticles synthesized by various microorganisms, such as bacteria, fungi, microalgae, and yeasts, as well as their advantages in biomedical, health, and environmental applications.