Spinel oxide ZnCr2O4 incorporated with ZnS quantum dots for application on visible light driven photocatalyst Azo dye degradation

Harnessing ZnCr2O4/g-C3N4 nanosheet heterojunction for enhanced photocatalytic degradation of rhodamine B and ciprofloxacin

Utilizing semiconductors for photocatalytic processes in water bodies as an approach to environmental remediation has gained considerable attention. Theoretical band position calculations revealed a type-II step-scheme charge flow mechanism for ZnCr2O4/g-C3N4 (ZCr/gCN), emphasizing effective heterojunction formation due to synergies between the materials. A composite of agglomerated nanoparticle ZnCr2O4 (Zinc chromium oxide - ZCr)/g-C3N4 (graphitic carbon nitride - gCN) nanosheets was synthesized using the ultrasonication and leveraging the heterojunction to enhance degradation efficiency and active sites participation. The synthesized sample was characterized by XRD, XPS, FTIR, BET, HRSEM, EDX, HRTEM, EIS PL, and UV-visible spectroscopy. XRD analysis confirmed the successful formation of pure ZnCr2O4, g-C3N4 (gCN), and their composite without any secondary phases. Optical investigations demonstrated a red shift (444-470 nm) in UV-visible spectra as ZnCr2O4 content increased. Morphological assessment via HRSEM unveiled agglomerated nanoparticle and nanosheet structures. FTIR analysis indicated the presence of gCN with the tri-s-triazine breathing mode at 807 cm-1, and the identification of octahedral Zn-O (598.11 cm-1) and tetrahedral Cr-O (447.01 cm-1) metal bonds within the spinel structure of ZnCr2O4. A Surface area of 134.162 m2/g was noticed with a microporous structure of pore radius 1.484 nm. Notably, the 15% ZCr/gCN composite achieved a remarkable 93.94 % (Rhodamine B-RhB) and 74.36 % (Ciprofloxacin - CIP) within 100 and 120 min, surpassing the performance of pure gCN. Improved degradation was attributed to higher charge separation (photo-excited electrons and holes), reducing charge recombination, as supported by photoluminescence and photoelectrochemical analyses. The presence of active species like superoxide during degradation was confirmed through a scavenger test. The stability analysis confirms the sample's stable nature (without secondary phase formation) after degradation. This work underscores the potential of ZnCr2O4 based metal-free compounds intended for effective environmental remediation.

Metal sulphides and their heterojunctions for photocatalytic degradation of organic dyes-A comprehensive review

Water pollution caused by organic dyes is one of the greatest threats to the ecosystem. The removal of dyes from water has remained a challenge for scientists. Recently, metal sulphides have emerged as a potential candidate for water remediation applications. The efficient charge transportation, greater surface-active sites, and low bandgap of metal sulphides make them an excellent choice of semiconductor photocatalysts for degradation of dyes. This review summarises the potential application of metal sulphides and their heterojunctions for the photocatalytic degradation of organic dyes from wastewater. A detailed study has been presented on the synthesis, basics of photodegradation and heterojunctions and photocatalytic activity. The effect of the use of templates, doping agents, synthesis route, and various other factors affecting the photocatalytic activity of metal sulphides have been summarised in this review. The synthesis techniques, characterisation techniques, mechanism of degradation of organic dyes by Z-scheme heterojunction photocatalyst, reusability and stability of metal sulphides, and the scope of future research are also discussed. This study indicates that Scopus-based core gathered data could be used to give an objective overview of the global dye degradation research from 2008 to 2023 (15 years). All data (articles, authors, keywords, and publications) is compiled in the Scopus database. For the bibliometric study, 1962 papers relevant to dye photodegradation by sulfide-based photocatalysts were found, and this number rises yearly. A bibliometric analysis provides a 15-year evaluation of the state-of-the-art research on the impact of metal sulfide-based photocatalysts on the photodegradation of dyes.

Biological investigation of a novel nanocomposite based on functionalized graphene oxide nanosheets with pectin, silk fibroin and zinc chromite nanoparticles

For biotechnology applications, a novel nanobiocomposite was synthesized based on modification of graphene oxide (GO) by extracted silk fibroin (SF), natural polymer pectin (Pec) and zinc chromite (ZnCr₂O₄) nanoparticles (NPs). The structure and properties of hybrid nanobiocomposite GO-Pec/SF/ZnCr₂O₄ such as thermal stability, less toxicity, biocompatibility, antibacterial, and biodegradable were proved by using field emission scanning electron microscope (FE-SEM), Fourier-transformed infrared (FT-IR), Energy dispersive X-ray spectroscopy (EDS), thermal gravimetric analysis (TGA), and X-Ray diffraction (XRD). According to the biological features of substances, the GO-Pec/SF/ZnCr₂O₄ nanobiocomposite shows perfect results in MTT (83.71 %) and Hemolysis (16.52 %) assays. accordingly, mentioned properties of this nanobiocomposite can be used as a scaffold for medical applications.

Hydrogen peroxide-assisted photocatalytic dye degradation over reduced graphene oxide integrated ZnCr2O4 nanoparticles

Zinc chromite nanoparticles (NPs) and zinc chromite-reduced graphene oxide (ZnCr₂O₄-rGO) nanocomposite have been synthesized by the combined effects of reflux condensation and calcination processes. The structural properties were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), UV-visible studies, etc. Structural morphology was investigated by field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) that indicate the formation of particles in the nanometer regime. The presence of the elements Zn, Cr, O and C has been confirmed by energy-dispersive X-ray spectroscopy (EDX) images which show the purity of the synthesized products. The photocatalytic activities of both as-prepared samples under visible light irradiation were investigated in presence of hydrogen peroxide (H₂O₂) and the results show that ZnCr₂O₄-rGO nanocomposite has a quite higher photo-activity response than virgin ZnCr₂O₄ NPs. The enhanced photo response indicates that, in ZnCr₂O₄, the photo-induced electrons favor to transfer to the rGO surface and the recombination of electron-hole pairs inhibited for which it results in the significantly increased photocatalytic activity for the ZnCr₂O₄-rGO photocatalyst and this phenomenon is also supported by the band gap value and photoluminescence results. Our outcomes demonstrate that ZnCr₂O₄-rGO nanocomposite is a more promising material to build up an efficient photocatalyst for waste water treatment.

An efficient and magnetically recoverable g-C3N4/ZnS/CoFe2O4 nanocomposite for sustainable photodegradation of organic dye under UV-visible light illumination

Effective improvement of an easily recoverable photocatalyst is equally vital to its photocatalytic performance from a practical application view. The magnetically recoverable process is one of the easiest ways, provided the photocatalyst is magnetically strong enough to respond to an external magnetic field. Herein, we prepared graphitic carbon nitride nanosheet (g-C₃N₄), and ZnS quantum dots (QDs) supported ferromagnetic CoFe₂O₄ nanoparticles (NPs) as the gC₃N₄/ZnS/CoFe₂O₄ nanohybrid photocatalyst by a wet-impregnation method. The loading of CoFe₂O₄ NPs in the g-C₃N₄/ZnS nanohybrid resulted in extended visible light absorption. The ferromagnetic g-C₃N₄/ZnS/CoFe₂O₄ nanohybrid exhibited better visible-light-active photocatalytic performance (97.11%) against methylene blue (MB) dye, and it was easily separable from the aqueous solution by an external bar magnet. The g-C₃N₄/ZnS/CoFe₂O₄ nanohybrid displayed excellent photostability and reusability after five consecutive cycles. The favourable band alignment and availability of a large number of active sites affected the better charge separation and enhanced photocatalytic response. The role of active species involved in the degradation of MB dye during photocatalyst by g-C₃N₄/ZnS/CoFe₂O₄ nanohybrid was also investigated. Overall, this study provides a facile method for design eco-friendly and promising g-C₃N₄/ZnS/CoFe₂O₄ nanohybrid photocatalyst as applicable in the eco-friendly dye degradation process.

Study of the Structure and Properties of ZnS Utilized in a Fluorescence Biosensor

ZnS materials have been widely used in fluorescence biosensors to characterize different types of stem cells due to their excellent fluorescence effect. In this study, ZnS was prepared by vulcanizing nano-Zn particles synthesized using a DC arc plasma. The composition and structure of the ZnS materials were studied by X-ray diffraction (XRD), and their functional group information and optical properties were investigated by using IR spectrophotometry and UV-vis spectrophotometry. It has been found that the synthesized materials consist of Zn, cubic ZnS, and hexagonal ZnS according to the vulcanization parameters. Crystalline ZnS was gradually transformed from a cubic to a hexagonal structure, and the cycling properties first increase, then decrease with increasing sulfurization temperature. There is an optimal curing temperature giving the best cycling performance and specific capacity: the material sulfurized thereat mainly consists of cubic β-ZnS phase with a small quantity of Zn and hexagonal α-ZnS. The cubic phase ZnS has better conductivity than hexagonal ZnS, as evinced by electrochemical impedance spectroscopy (EIS). The ZnS (as prepared) shows board absorption, which can be used in fluorescence biosensors in cell imaging systems.

Construction of magnetically recoverable ZnS-WO3-CoFe2O4 nanohybrid enriched photocatalyst for the degradation of MB dye under visible light irradiation

Easily recyclable photocatalysts have received considerable attention for their practical application, in order to address the wastewater treatments. Here, we report efficient and magnetically recyclable ZnS-WO₃-CoFe₂O₄ nanohybrid prepared through wet impregnation method. The photophysical and optical properties of as-prepared photocatalysts was investigated by different spectroscopic techniques. The photocatalytic activity of as synthesized samples were assessed by the photodegradation of methylene blue (MB) dye under visible light irradiation. Amongst, ZnS-WO₃-CoFe₂O₄ nanohybrid exhibit higher photodegradation activity than the other bare and hybrid samples. The enhanced light absorption and lower emission intensity provide the improved photocatalytic activity of ZnS-WO₃-CoFe₂O₄ nanohybrid. The ZnS-WO₃-CoFe₂O₄ nanohybrid exhibit excellent photostability after four consecutive cycles. The ferromagnetic behavior of the hybrid sample using easily recover from the dye solution using an external bar magnet.