3D flower-like NiCo-LDH composites for a high-performance NO2 gas sensor at room temperature

Oxygen Vacancy Induced Atom-Level Interface in Z-Scheme SnO2/SnNb2O6 Heterojunctions for Robust Solar-Driven CO2 Conversion

The modulation of Z-scheme charge transfer is essential for efficient heterostructure toward photocatalytic CO₂ reduction. However, constructing a compact hetero-interface favoring the Z-scheme charge transfer remains a great challenge. In this work, an interfacial Nb-O-Sn bond and built-in electric field-modulated Z-scheme O_v-SnO₂/SnNb₂O₆ heterojunction was prepared for efficient photocatalytic CO₂ conversion. Systematic investigations reveal that an atomic-level interface is constructed in the O_v-SnO₂/SnNb₂O₆ heterojunction. Under simulated sunlight irradiation, the obtained O_v-SnO₂/SnNb₂O₆ photocatalyst exhibits a high CO evolution rate of 147.4 μmol h^-1 g^-1 from CO₂ reduction, which is around 3-fold and 3.3-fold of SnO₂/SnNb₂O₆ composite and pristine SnNb₂O₆, respectively, and favorable cyclability by retaining 95.8% rate retention after five consecutive tests. As determined by electron paramagnetic resonance spectra, in situ Fourier transform infrared spectra, and density functional theory calculations, Nb-O-Sn bonds and built-in electric field induced by the addition of oxygen vacancies jointly accelerate the Z-scheme charge transfer for enhanced photocatalytic performance. This work provides a promising route for consciously modulating Z-scheme charge transfer by atomic-level interface engineering to boost photocatalytic performance.

Nano-Zero-Valent Zinc-Modified Municipal Sludge Biochar for Phosphorus Removal

Municipal sludge biochar (MSBC) can be used to absorb phosphorus in water for waste treatment. Nano-zero-valent zinc (nZVZ) was uniformly attached to MSBC to obtain a highly efficient phosphorus-absorbing composite material, nZVZ–MSBC. Characterization by FTIR, XPS, XRD, and BET showed that nZVZ was uniformly dispersed on the surface of the MSBC. Zinc loading was able to greatly improve the adsorption performance of MSBC for phosphorus. Adsorption experiments illustrated that the adsorption process conformed to the Langmuir model, and the maximum adsorption amount was 186.5 mg/g, which is much higher than that for other municipal sludge biochars. The adsorption process reached 80% of the maximum adsorption capacity at 90 min, and this gradually stabilized after 240 min; adsorption equilibrium was reached within 24 h. The optimum pH for adsorption was 5. The main adsorption mechanism was chemical adsorption, but physical adsorption, external diffusion, internal diffusion, and surface adsorption also played roles. The potential for application as an efficient adsorbent of phosphorus from water was confirmed. In addition, a novel strategy for municipal sludge disposal and resource utilization is provided.

Recent trends in layered double hydroxides based electrochemical and optical (bio)sensors for screening of emerging pharmaceutical compounds

The rapid expansion of the human population has given rise to new environmental and biomedical concerns, contributing to different advancements in the pharmaceutical industry. In the field of analytical chemistry over the last few years, layered double hydroxides (LDHs) have drawn significant attention, owing to their extraordinary properties. Furthermore, the novel advancement of LDH-based optical and electrochemical platforms to detect different pharmaceutical materials has acquired substantial attention because of their outstanding specificity, actual-time controlling, and user-friendliness. This review aims to recapitulate advanced LDHs-based optical and electrochemical sensors and biosensors to identify and measure important pharmaceutical compounds, such as anti-depressant, anti-inflammatory, anti-viral, anti-bacterial, anti-cancer, and anti-fungal drugs. Additionally, fundamental parameters, namely interactions between sensor and analyte, design rationale, classification, selectivity, and specificity are considered. Finally, the development of high-efficiency techniques for optical and electrochemical sensors and biosensors is featured to deliver scientists and readers a complete toolbox to identify a broad scope of pharmaceutical substances. Our goals are: (i) to elucidate the characteristics and capabilities of available LDHs for the identification of pharmaceutical compounds; and (ii) to deliver instances of the feasible opportunities that the existing devices have for the developed sensing of pharmaceuticals regarding the protection of ecosystems and human health at the global level.

Recent Breakthrough in Layered Double Hydroxides and Their Applications in Petroleum, Green Energy, and Environmental Remediation

The fast development of the world civilization is continuously based on huge energy consumption. The extra-consumption of fossil fuel (petroleum, coal, and gas) in past decades has caused several political and environmental crises. Accordingly, the world, and especially the scientific community, should discover alternative energy sources to safe-guard our future from severe climate changes. Hydrogen is the ideal energy carrier, where nanomaterials, like layered double hydroxides (LDHs), play a great role in hydrogen production from clean/renewable sources. Here, we review the applications of LDHs in petroleum for the first time, as well as the recent breakthrough in the synthesis of 1D-LDHs and their applications in water splitting to H2. By 1D-LDHs, it is possible to overcome the drawbacks of commercial TiO2, such as its wide bandgap energy (3.2 eV) and working only in the UV-region. Now, we can use TiO2-modified structures for infrared (IR)-induced water splitting to hydrogen. Extending the performance of TiO2 into the IR-region, which includes 53% of sunlight by 1D-LDHs, guarantees high hydrogen evolution rates during the day and night and in cloudy conditions. This is a breakthrough for global hydrogen production and environmental remediation.

Recent developments in alginate-based adsorbents for removing phosphate ions from wastewater: a review

The huge development of the industrial sector has resulted in the release of large quantities of phosphate anions which adversely affect the environment, human health, and aquatic ecosystems. Naturally occurring biopolymers have attracted considerable attention as efficient adsorbents for phosphate anions due to their biocompatibility, biodegradability, environmentally-friendly nature, low-cost production, availability in nature, and ease of modification. Amongst them, alginate-based adsorbents are considered one of the most effective adsorbents for removing various types of pollutants from industrial wastewater. The presence of active COOH and OH^- groups along the alginate backbone facilitate its physical and chemical modifications and participate in various possible adsorption mechanisms of phosphate anions. Herein, we focus our attention on presenting a comprehensive overview of recent advances in phosphate removal by alginate-based adsorbents. Modification of alginate by various materials, including clays, magnetic materials, layered double hydroxides, carbon materials, and multivalent metals, is addressed. The adsorption potentials of these modified forms for removing phosphate anions, in addition to their adsorption mechanisms are clearly discussed. It is concluded that ion exchange, complexation, precipitation, Lewis acid-base interaction and electrostatic interaction are the most common adsorption mechanisms of phosphate removal by alginate-based adsorbents. Pseudo-2^nd order and Freundlich isotherms were figured out to be the major kinetic and isotherm models for the removal process of phosphate. The research findings revealed that some issues, including the high cost of production, leaching, and low efficiency of recyclability of alginate-based adsorbents still need to be resolved. Future trends that could inspire further studies to find the best solutions for removing phosphate anions from aquatic systems are also elaborated, such as the synthesis of magnetic-based alginate and various-shaped alginate nanocomposites that are capable of preventing the leaching of the active materials.

Recent Advances in Layered Double Hydroxide-Based Electrochemical and Optical Sensors

Layered double hydroxides (LDHs) have attracted considerable attention as promising materials for electrochemical and optical sensors owing to their excellent catalytic properties, facile synthesis strategies, highly tunable morphology, and versatile hosting ability. LDH-based electrochemical sensors are affordable alternatives to traditional precious-metal-based sensors, as LDHs can be synthesized from abundant inorganic precursors. LDH-modified probes can directly catalyze or host catalytic compounds that facilitate analyte redox reactions, detected as changes in the probe's current, voltage, or resistance. The porous and lamellar structure of LDHs allows rapid analyte diffusion and abundant active sites for enhanced sensor sensitivity. LDHs can be composed of conductive materials such as reduced graphene oxide (rGO) or metal nanoparticles for improved catalytic activity and analyte selectivity. As optical sensors, LDHs provide a spacious, stable structure for synergistic guest-host interactions. LDHs can immobilize fluorophores, chemiluminescence reactants, and other spectroscopically active materials to reduce the aggregation and dissolution of the embedded sensor molecules, yielding enhanced optical responses and increased probe reusability. This review discusses standard LDH synthesis methods and overviews the different electrochemical and optical analysis techniques. Furthermore, the designs and modifications of exemplary LDHs and LDH composite materials are analyzed, focusing on the analytical performance of LDH-based sensors for key biomarkers and pollutants, including glucose, dopamine (DA), H2O2, metal ions, nitrogen-based toxins, and other organic compounds.

Layered Double Hydroxide-Based Gas Sensors for VOC Detection at Room Temperature

Miniaturized low-cost sensors for volatile organic compounds (VOCs) have the potentiality to become a fundamental tool for indoor and outdoor air quality monitoring, to significantly improve everyday life. Layered double hydroxides (LDHs) belong to the class of anionic clays and are largely employed for NO x detection, while few results are reported on VOCs. In this work, a novel LDH coprecipitation method is proposed. For the first time, a study comparing four LDHs (ZnAl-Cl, ZnFe-Cl, ZnAl-NO3, and MgAl-NO3) is carried out to investigate the sensing performances. As explored through several microscopy and spectroscopy analyses, LDHs show a morphology characterized by a large surface area and a three-dimensional hierarchical flowerlike architecture with micro- and nanopores that induce a fast diffusion and highly effective surface interaction of the target gases. The fabricated sensors, operating at room temperature, are able to reversibly and selectively detect acetone, ethanol, ammonia, and chlorine vapors, reaching significant sensing response values up to 6% at 21 °C. The results demonstrate that by changing the LDHs' composition, it is possible to modulate the sensitivity and selectivity of the sensor, helping the discrimination of different analytes, and the consequent integration on a sensor array paves the way for electronic nose development.

Strong Adsorption of Phosphorus by ZnAl-LDO-Activated Banana Biochar: An Analysis of Adsorption Efficiency, Thermodynamics, and Internal Mechanisms

Zn-Al layered bimetallic composites were prepared by ethanol strengthening and co-precipitation using banana straw as a raw material. A high-efficiency phosphorus adsorbent (ZnAl-LDO-BC) was obtained by calcination at a high temperature. The kinetics and thermodynamics of phosphorus adsorption on ZnAl-LDO-BC were then studied. The results showed that the adsorption process of ZnAl-LDO-BC corresponds with the pseudo-second-order (PSO) kinetic equation and the Langmuir model. The theoretical maximum adsorption capacity of ZnAl-LDO-BC is 111.11 mg/g (at 45 °C, 500 mg/L phosphorus initial concentration). The influence of anions on phosphorus adsorption decreased in strength in the following order: CO₃ ^2- > SO₄ ^2- > NO₃ ^-. Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) were used to characterize the adsorption of phosphorus on ZnAl-LDO-BC and showed that ZnAl-LDO-BC can efficiently adsorb phosphorus. The adsorption mechanism utilizes both O-H and C-H on the surface of ZnAl-LDO-BC for the adsorption of PO₄ ^3-, forming Zn₃(PO₄)₂·₄H₂O via complexation precipitation; additionally, biochar surface adsorption and interlayer adsorption are indispensable forms of phosphate adsorption. With the systematic study of phosphorus adsorption by ZnAl-LDO-BC, a novel green technology was developed for addressing phosphorus pollution.

SnNb2O6/NiCo-LDH Z-scheme heterojunction with regulated oxygen vacancies obtained by engineering the crystallinity for efficient and renewable photocatalytic H2 evolution

SnNb2O6/NiCo-LDH Z-scheme heterojunction with abundant oxygen vacancies exhibited highly activity and stability toward photocatalytic H2 evolution, ascribed to the regeneration of oxygen vacancy by engineering the crystallinity.

Layered double hydroxides are still out in the bloom: Syntheses, applications and advantages of three-dimensional flower-like structures

Layered double hydroxides (LDHs) have received great attention for years in numerous fields. Controlled and flexible layer composition, as well as the vast assortment of possible anionic guests, and easy adaptability for multipurpose applications, have been some of the many reasons behind their extraordinary success. However, versatility does not only involve the composition or the dimensions of the crystals but also their morphology. Aside from conventional hexagonal, flat structures, three-dimensional assemblies have been reported with architectures closely resembling those of flowers. The possibility of interconnecting the LDH nanosheets in rosette-like geometries has arisen the interest in finding new ways to control, modulate, and guide the particle growth obtaining hierarchical structures to be adapted to specific targets. This review is focused on describing the different strategies implemented to build flower-like assemblies, and on investigating their applications, looking for specific advantages of the use of a three-dimensional architecture over a bi-dimensional one.

Room-temperature efficient NO2 gas sensors fabricated by porous 3D flower-like ZnAl-layered double hydroxides

Three-dimensional (3D) flower-like zinc and aluminum-sodium dodecyl sulfate-layered double hydroxides (ZnAl-SDS-LDHs) intercalated by anions were prepared using a simple one-step hydrothermal method.