Magnetite/graphite carbon nitride composite for peroxymonosulfate non-radical activation

Magnetic Co/CoOx@NCNT catalysts for activation of potassium peroxymonosulfate to deteriorate phenol from wastewater

Phenols are of much toxicological and they must be effectively removed from the wastewater from industries as well as sewage treatment. Such removal demands a special and strong composite. So, this piece of research aims to activate Potassium peroxymonosulfate (PPMS) with the large surface area of magnetite nitrogen-fixed porous carbon nanotube composites (Co/CoOx@NCNT). Increases in the graphitization degree and structural control brought about by the incorporation of reduced Graphite oxide (rGO) significantly increased the catalyst activity of Co/CoOx@NCNT. It was found that PPMS activation for phenol removal by Co/CoOx@NCNT was nearly as effective as by homogeneous Co²⁺, with nearly 100% removal efficiency in 10 min. Both high reusability and high recycling of Co/CoOx@NCNT were accomplished simultaneously by proving the technology of viability in practical applications. The PPMS activation mechanism in the Co/CoOx@NCNT/PPMS system was driven by the electron transmission from contaminants to PPMS through the sp^2- hybrid carbon nanotubes and nitrogen system. The selectivity of the Co/CoOx@NCNT/PPMS system to remove diverse organic compounds was determined by batch experiments. Due to the insignificant impact of radicals reactive on pollutant breakdown, the ability to inhibit species (such as Cl^- and natural organic materials) from a minor role was significantly decreased. These results not only shed light on the process of PPMS heterogeneous activation but also provided a framework for the balanced project of highly effective nanocarbon-based catalysts for PPMS activation.

Rice husk biochar modified-CuCo2O4 as an efficient peroxymonosulfate activator for non-radical degradation of organic pollutants from aqueous environment

A series of rice husk biochar (RHBC) modified bimetallic oxides were prepared using a simple pyrolysis method to activate peroxymonosulfate (PMS) for the degradation of acid orange G (OG). The results demonstrated that 50 mg L⁻¹ OG was completely decomposed by 1 mM PMS activated with 100 mg L⁻¹ RHBC–CuCo₂O₄ within 15 min at initial pH 3.4. The OG degradation rate constant k of RHBC–CuCo₂O₄/PMS (0.95 × 10⁻¹ min⁻¹) was five times greater than that of CuCo₂O₄/PMS (0.19 × 10⁻¹ min⁻¹), suggesting that the introduction of RHBC significantly improved the activity of bimetallic oxides. The effects of the initial pH, catalyst dosage, PMS concentration and reaction temperature on OG removal were also studied. The degradation products of OG were analysed using a gas chromatography-mass spectrometer (GC-MS). Electron paramagnetic resonance (EPR) and quenching experiments showed that singlet oxygen (¹O₂) was the main active species. The RHBC–CuCo₂O₄/PMS oxidation system is not only unaffected by inorganic anions (Cl⁻, NO₃⁻, HCO₃⁻) and humic acid (HA), but also could remove other typical pollutants of acetaminophen (ACT), sulfathiazole (STZ), rhodamine B (RhB), and bisphenol A (BPA). These findings show that RHBC–CuCo₂O₄ has great potential for practical applications in the removal of typical organic pollutants.

A series of rice husk biochar (RHBC) modified bimetallic oxides were prepared using a simple pyrolysis method to activate peroxymonosulfate (PMS) for the degradation of acid orange G (OG).

N-Doped Biochar as a New Metal-Free Activator of Peroxymonosulfate for Singlet Oxygen-Dominated Catalytic Degradation of Acid Orange 7

In this paper, using rice straw as a raw material and urea as a nitrogen precursor, a composite catalyst (a nitrogen-doped rice straw biochar at the pyrolysis temperature of 800 °C, recorded as NRSBC800) was synthesized by one-step pyrolysis. NRSBC800 was then characterized using XPS, BET, TEM and other technologies, and its catalytic performance as an activator for permonosulfate (PMS) to degrade acid orange 7 (AO7) was studied. The results show that the introduction of N-doping significantly improved the catalytic performance of NRSBC800. The NRSBC800/PMS oxidation system could fully degrade AO7 within 30 min, with the reaction rate constant (2.1 × 10 ^-1 min^-1) being 38 times that of RSBC800 (5.5 × 10^-3 min^-1). Moreover, NRSBC800 not only had better catalytic performance than traditional metal oxides (Co₃O₄ and Fe₃O₄) and carbon nanomaterial (CNT) but also received less impact from environmental water factors (such as anions and humic acids) during the catalytic degradation process. In addition, a quenching test and electron paramagnetic resonance (EPR) research both indicated that AO7 degradation relied mainly on non-free radical oxidation (primarily singlet oxygen (¹O₂)). A recycling experiment further demonstrated NRSBC800's high stability after recycling three times.