Noble-metal-free Mo2C co-catalsyt modified perovskite oxide nanosheet photocatalysts with enhanced hydrogen evolution performance

Application of response surface methodology for optimization of the test condition of oxygen evolution reaction over La0.8Ba0.2CoO3 perovskite-active carbon composite

The Experimental Design was applied to optimize the electrocatalytic activity of La0.8Ba0.2CoO3 perovskite oxide/Active Carbon composite material in the alkaline solution for the Oxygen Evolution Reaction. After the preparation of La0.8Ba0.2CoO3, and structural characterizations, the experimental design was utilized to determine the optimal amount of the composite material and testing conditions. The overpotential was defined as the response variable, and the mass ratio of perovskite/active carbon, Potassium hydroxide (KOH) concentration, and Poly(vinylidene fluoride) (PVDF) amount were considered effective parameters. The significance of model terms is demonstrated by P-values less than 0.0500. The proposed prediction model determined the optimal amounts of 0.665 mg of PVDF, a KOH concentration of 0.609 M, and A perovskite/Active Carbon mass ratio of 2.81 with 308.22 mV overpotential (2.27% greater than the actual overpotential). The stability test of the optimized electrode material over 24 h suggests that it could be a good candidate electrocatalyst for OER with reusability potential.

Enhanced Photocatalytic Properties of Restacked Unilamellar [SrTa2O7]2- Nanosheets of Aurivillius Phase Layered Perovskites

In the present work, unilamellar [SrTa₂O₇]^2- perovskite nanosheets with variable lateral dimensions were synthesized via a high-yield, three-step liquid exfoliation route from layered Bi₂SrTa₂O₉. The photocatalytic activity of the parent and exfoliated layered perovskites was evaluated for the photocatalytic dye degradation of Rhodamine B under UV light (254 nm) and reduction of water to H₂ under the full solar spectrum. A comparative study of the photocatalytic behavior of unilamellar [SrTa₂O₇]^2- perovskite nanosheets and parent layered structure showed a significant improvement in both hydrogen evolution (98.20 vs 3 μmol g^-1) and Rhodamine B degradation time (180 vs 30 min), with the restacked nanosheets. The exfoliation of layered perovskites not only increases their specific surface area, providing more active sites, but also reduces the recombination probability of electrons and holes due to their unilamellar structure and reduced charge transport pathways. The synthesis and preparation of strong acid solids such as [SrTa₂O₇]^2- perovskite nanosheets can be a promising approach for effective adsorption of pollutants with cationic nature and more efficient electron transfer between the dye and catalyst. Finally, the photocatalytic characteristics of the restacked unilamellar [SrTa₂O₇]^2- nanosheets remained unchanged after three successive cycles of recycling-reusing.

Molybdenum disulfide loading on a Z-scheme graphitic carbon nitride and lanthanum nickelate heterojunction for enhanced photocatalysis: Interfacial charge transfer and mechanistic insights

Interfacial design and the co-catalyst effect are considered to be effective to achieve separation and transport of photogenerated carriers in composite photocatalysts. In this study, a Z-scheme heterojunction was successfully combined with a co-catalyst to achieve a highly efficient LaNiO₃/g-C₃N₄/MoS₂ photocatalyst. MoS₂ flakes were loaded on a hybrid material surface, which was formed by LaNiO₃ nanocubes embedded on layered g-C₃N₄, and a good heterostructure with multiple attachment sites was obtained. Experimental studies confirmed that the Z-scheme heterojunction completely preserves the strong redox ability of the photogenerated electrons and holes. As a cocatalyst, MoS₂ further promoted interfacial charge separation and transport. The synergistic effect of the Z-scheme heterojunction and co-catalyst effectively realized the transfer of photogenerated carriers from "slow transfer" to "high transfer" and promoted water decomposition and pollutant degradation. Results revealed that under simulated sunlight irradiation, LaNiO₃/g-C₃N₄/MoS₂ composites exhibit superior hydrogen evolution of 45.1 μmol h^-1, which is 19.1 times that of g-C₃N₄ and 4.9 times that of LaNiO₃/g-C₃N₄, respectively. Moreover, the LaNiO₃/g-C₃N₄/MoS₂ Z-scheme photocatalyst exhibited excellent photocatalytic performance for antibiotic degradation and heavy-metal ion reduction under visible light. This study might provide some insights into the development of photocatalysts for solar energy conversion and environmental remediation.