Sulfhydryl-modified SiO2 cryogel: A pH-insensitive and selective adsorbent for efficient removal of mercury in waters

Effectiveness of light-emitting diodes for arsenic and mercury accumulation by Ceratophyllum demersum L.: An innovative advancement in phytoremediation technology

Light Emitting Diodes (LEDs) have emerged as a tool with great potential in the field of phytoremediation, offering a novel approach to enhance the efficiency of plant-based remediation techniques. In this work investigated the influence of LEDs on the phytoremediation of arsenic (As) and mercury (Hg) by Ceratophyllum demersum L., propagated using tissue culture methods. In addition, the biochemical properties of the plants exposed to metal toxicity were examined. Phytoremediation experiments employed concentrations of As (0.01-1.0 mg/L) and Hg (0.002-0.2 mg/L), with application periods set at 1, 7, 14, and 21 days. In addition to white, red and blue LEDs, white fluorescent light was used for control purposes in the investigations. A positive correlation was observed between higher metal concentrations, extended exposure times, and increased metal accumulation in the plants. Red LED light yielded the highest level of heavy metal accumulation, while white fluorescent light resulted in the lowest accumulation level. Examination of the biochemical parameters of the plants, including photosynthetic pigment levels, protein quantities, and lipid peroxidation, revealed a pronouncedly enhanced performance in specimens subjected to red and blue LED illumination, surpassing outcomes observed in other light treatments. The findings of this study introduce innovative avenues for the effective utilization of red and blue LED lights in the realm of phytoremediation research. Thus, the interaction between LEDs, tissue culture, and the phytoremediation process could lead to synergistic effects that contribute to more effective and sustainable remediation strategies.

Preparation and Characterization of Biodegradable Sponge-like Cryogel Particles of Chitosan via the Inverse Leidenfrost (iLF) Effect

Chitosan-based cryogel particles were synthesized using the inverse Leidenfrost (iLF) effect, with glutaraldehyde employed as the cross-linker. The resulting cryogels exhibited a sponge-like morphology with micrometer-sized interconnected pores and demonstrated resilience, withstanding up to three compression-release cycles. These characteristics highlight the potential of chitosan cryogels for diverse applications, including adsorption and biomedical uses. We further investigated the influence of varying acetic acid concentrations on the properties of the chitosan cryogels. Our findings revealed that the particle size distribution of the cryogels ranged from 1300 to 2900 μm. As the concentration of acetic acid increased, the swelling degree of the chitosan cryogels decreased, stabilizing at an approximate value of around 6 at 0.03 mol of acetic acid. Additionally, the shift in the absorption peak of the OH and free amino groups from 3261 to 3404 cm-1 confirmed the cross-linking reaction between chitosan and glutaraldehyde.

One-step synthesis of thiol-functionalized metal coordination polymers: effective and superfast removal of Hg (II) in the different matrices to ppb level

The mercury in water bodies has posed a great threat to the environment and humans, and removing mercury and purifying wastewater has become a global environmental issue. Adopting Zn(II) coordination polymers (Zn-CPs) emerged as a new approach, however, the kind of Zn-CPs, which solely consisted of amino groups, exhibited unsatisfactory performance in capturing Hg(II) at a low level and causing the subsequent leaching of Zn(II) after adsorption. In this study, we fabricated the thiol-modified Zn-based coordination polymers (Zn-CPs-SH) through a one-step solvothermal reaction to efficiently capture Hg(II) from wastewater. Its preeminent adsorption performance could be maintained across a broad range of pH (2-7), ion strength (Cl-, SO42-, and NO3- at 0-10,000 mg/L), and dissolved organic matter (0-100 mg/L). The impressive properties, including fast kinetics (k2∼1.01 × 10-4 L/min), outstanding adsorption capacity (1278.72 mg/g, 298 K), superior selectivity (Kd∼2.3 × 104 mL/g), and excellent regeneration capability (Re = 93.54% after 5 cycles), were attributed to the ultra-abundance of adsorption sites donating from thiol groups, which was revealed by XPS analysis, DFT calculations, and molecular orbital theory. Noteworthy, the high practical application potential of Zn-CPs-SH was demonstrated by its outstanding Hg(II) removal efficiency (Re ≥ 99.10%) in various Hg(II)-spiked water matrices, e.g., tap water, river water, and industrial wastewater. Importantly, the residual Hg(II) in the treated water declined to the ppb level without any Zn(II) leaching. Overall, it is highly anticipated that the incorporation of Zn-CPs-SH would facilitate the practical implementation of highly efficient Hg(II) removal in wastewater treatment owing to its exhibiting high selective affinity, superior adsorption capacity, and enhanced efficiency.

Removal of Cd(II), Co(II), Cr(III), Ni(II), Pb(II) and Zn(II) ions from wastewater using polyethyleneimine (PEI) cryogels

The removal of the target analytes, Cd(II), Co(II), Cr(III), Ni(II), Pb(II), and Zn(II) from contaminated waters was achieved using super porous polyethyleneimine (PEI) cryogels as adsorbent. The optimum values of the sample pH and contact time were determined as 4.0 and 90 min, respectively, for the removal of the analytes. The adsorption capacities of the sorbent were between 19.88 and 24.39 mgg^-1 from 10 mL of 50 mgL^-1 target metal ion solutions. The sorption kinetics of metal ions were fitted with the pseudo-second-order model. The adsorption isotherms of the target analytes into PEI cryogel were well-fitted to the Langmuir isotherm model as expected from the material homogeneity. The selectivity of the PEI cryogel in the presence of Na⁺, Ca²⁺, Mg²⁺, NO₃^-, K⁺ and Cl^- ions even at high concentrations was tested, and the tolerance limits were satisfactory enough, e.g., the adsorption of the target analytes was even not affected in the presence of 2000 mgL^-1 Ca²⁺, K⁺, Na⁺, Cl^- and 5000 mgL^-1 NO₃^- ions. The PEI cryogels were successfully utilized in different industrial wastewater samples that were spiked with a known amount of analytes. The removal of the analytes from wastewater samples was in the following ranges 91.94-99.86% for Cd(II), 89.59-99.89% for Co(II), 80.35-99.76% for Cr(III), 92.02-99.84% for Ni(II), 83.28-99.86% for Pb(II), and 82.94-98.24% for Zn(II), respectively. The presented novel removal strategy offers a selective, efficient, and easy application for target metal ions from industrial wastewater samples.

Development and validation of the DGT technique using the novel cryogel for measuring dissolved Hg(II) in the estuary

The complex seawater matrix has significantly influenced the determination of estuarine dissolved Hg(II), hindering its monitoring and risk assessment in maricultural areas. In this work, SiO2-SH-DGT assembled by the sulfhydryl-modified silica cryogel (SiO2-SH cryogel) as the novel binding phase was developed to tackle this problem. The uniform dispersion of the cryogel into binding gel was advantageous for achieving remarkable and comparable capacity, which endowed the estimated diffusion coefficient (D) to be 1.39-3.08 times of the existing research. The SiO2-SH-DGT performance was independent of pH (3-9), ionic strength (10-800 mM), fulvic acid at low content, and seawater matrix (Na+, K+, Ca2+, Cl-), but the high content of Mg2+ did interfere with the Hg(II) accumulation, which manifested as competitive adsorption and diffusion. Therefore, the calibrated model was established by calibrating accumulated mass (M') and diffusion coefficient (D') based on the Mg2+ concentration, its high accuracy was further verified in the lab. Finally, SiO2-SH-DGT was deployed in the three typical aquaculture areas in Beibu Gulf, field trials achieved the actual Hg(II) level to be 1.52-5.38 ng/L with consideration of the diffusion boundary layer. The finding could provide new thought and technical support for metal pollution monitoring in estuary maricultural areas.

Mitigative effect of green tea extract against mercury(II) chloride toxicity in Allium cepa L. model

Mercury (Hg) is a highly toxic heavy metal for all organisms. In the present study, the mitigative role of 190 mg/L and 380 mg/L doses of green tea extract (GTex) against mercury(II) chloride (HgCI₂)-induced toxicity was evaluated in Allium cepa L. For this aim, selected physiological, genotoxicity, and biochemical parameters as well as meristematic cell injuries in the roots were investigated. Ratios of catechin and caffeine in GTex were determined by HPLC analysis. Also, free radical scavenging activity of GTex was tested against superoxide and hydrogen peroxide radicals. As a result of HgCI₂ application, germination percentage, root elongation, weight gain, and mitotic index (MI) declined, while the frequency of micronucleus (MN), chromosomal abnormalities (CAs), and meristematic cell damages increased. HgCI₂ administration also led to a significant increase in malondialdehyde content, superoxide dismutase, and catalase activities which are signs of oxidative stress. On contrary, applications of GTex together with HgCI₂ reduced HgCI₂-induced adverse effects in all parameters in a dose-dependent manner. Antioxidant components in GTex were listed as caffeine, epigallocatechin gallate, epigallocatechin, epicatechin gallate, and catechin according to their abundance. GTex exhibited a strong scavenging ability in the presence of superoxide and hydrogen peroxide radicals. The present study revealed the strong protective capacity of GTex against HgCI₂-induced toxicity in A. cepa owing to its high antioxidant content with a multifaceted perspective. With this study, a reliable starting point was established for future studies investigating the more common and diverse use of GTex against toxic substances.

Functionalized dual modification of covalent organic framework for efficient and rapid trace heavy metals removal from drinking water

A key challenge in trace heavy metals removal from drinking water by adsorption technology is to achieve high adsorption capacity and rapid uptake speed of adsorbent. Herein, we report a functionalized double modified covalent organic framework (DMTD-COF-SH) bearing high-density sulfur and nitrogen chelating groups provided simultaneously by 2,5-dimercapto-1,3,4-thiadiazole (DMTD) and 1,2-ethanedithiol, which was prepared via a facile one-pot thiol-ene "click" reaction. PXRD, FTIR, XPS, SEM, BET and ¹³C MAS NMR confirmed their successful graft, and DMTD was found to be more easily grafted on the COF surface layer than 1,2-ethanedithiol. The as-prepared DMTD-COF-SH showed remarkable adsorption capacity and ultrafast uptake dynamics to trace heavy metals owing to the synergistic effects resulting from densely populated sulfur and nitrogen chelating groups within ordered COF mesopores and at the COF surface. On the basis of the drinking water treatment units standard NSF/ANSI 53-2020, when the adsorbent dosage was 10 mg/30 mL and 20 mg L^-1 calcium ions coexisted, the lead concentration decreased from initial 150 μg L^-1 to 2.89 μg L^-1 within 10 s, far below the allowable limit of world health organization (WHO) drinking water standard (10 μg L^-1), and the maximum adsorption capacity meeting the standard attained 14.22 mg g^-1. The adsorbent also exhibited excellent stability, wide applicable pH range and outstanding adsorption performance for coexisting trace lead, mercury, cadmium, chromium (VI) and copper in tap water, indicating that the DMTD-COF-SH material has excellent application prospect for trace heavy metals removal from drinking water.