Efficient removal and recycle of acid blue 93 dye from aqueous solution by acrolein crosslinked chitosan hydrogel

Efficient treatment of palladium from wastewater by acrolein cross-linked chitosan hydrogels: Adsorption, kinetics, and mechanisms

Herein we present a study on the preparation and properties of a hydrogel adsorbent for treatment of wasted palladium souring from actial petrochemical industrial wastewater. Chitosan was used as the raw material and acrolein as the cross-linking agent for the hydrogel (A/CS). The adsorption behaviors of the hydrogel for Pd(II) ions were characterized and analyzed. The effect of pH, temperature, adsorption kinetics, and thermodynamics were investigated. Langmuir models were employed to describe the adsorption isotherms, while the pseudo-second-order equation was applied to describe the adsorption kinetics. The experimental results demonstrated that the adsorption was a monolayer chemical adsorption, and the adsorption capacity was found to reach 505.05 mg/g under optimal conditions. In addition, FT-IR and XPS analyses, combined with MS calculations confirmed that chelation and electrostatic attraction were dominated in the adsorption process. Overall, the development of this hydrogel adsorbent will provide a practical approach to the treatment of industrial wastewater containing palladium and have great potential for practical applications.

Efficiency of chitosan nanoparticle with polyaluminum chloride in dye removal from aqueous solutions: Optimization through response surface methodology (RSM) and central composite design (CCD)

According to the widespread use of polyaluminum chloride (PAC) in wastewater treatment and residual aluminum left in treated water, there is an urgent need to use environmentally friendly natural coagulants with conventional chemical coagulants to reduce their consumption. In this investigation, chitosan (CS) nanoparticles prepared as natural coagulant by ion gelation were applied to remove anionic dyes from aqueous solutions. For the characterization of the synthesized CS nanoparticles, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), and zeta analyzer were used. The effects of different parameters, including pH, initial concentration of dye in addition to CS nanoparticles, and PAC dosages on adsorption efficiency were studied via response surface methodology (RSM) to determine the optimum conditions for maximum color removal. Results of the tests indicate that the use of CS nanoparticles and PAC with an interval of 30 s effectively increases the efficiency of color removal. The usage of PAC (80 mg/L) and CS nanoparticles (150 mL/L) at pH = 6.6 reaches the maximum color removal efficiency of 92 %. Accordingly, the use of CS nanoparticles as coagulant aid reduced the amount of needed PAC and enhanced the color removal efficiency. Furthermore, the exclusive effect of CS nanoparticles in the adsorption of dye revealed that the adsorption followed the Langmuir type II model, with an adsorption capacity of 1100 mg/g. The resulting data from the kinetic study indicated that the pseudo-second-order type II model was the most suitable model to describe the adsorption process of dye on CS nanoparticles. Based on the results, the CS nanoparticles have adequate potential to reduce the amount of needed PAC dosage for the treatment of water contaminated with anionic dyes.

Progress in preparation and properties of chitosan-based hydrogels

Chitosan is a kind of natural polysaccharide biomass with the second highest content in nature after cellulose, which has good biological properties such as biocompatibility, biodegradability, hemostasis, mucosal adsorption, non-toxicity, and antibacterial properties. Therefore, hydrogels prepared from chitosan have the advantages of good hydrophilicity, unique three-dimensional network structure, and good biocompatibility, so they have received extensive attention and research in environmental testing, adsorption, medical materials, and catalytic supports. Compared with traditional polymer hydrogels, biomass chitosan-based hydrogels have advantages such as low toxicity, excellent biocompatibility, outstanding processability, and low cost. This paper reviews the preparation of various chitosan-based hydrogels using chitosan as raw material and their applications in the fields of medical materials, environmental detection, catalytic carriers, and adsorption. Some views and prospects are put forward for the future research and development of chitosan-based hydrogels, and it is believed that chitosan-based hydrogels will be able to obtain more valuable applications.

Selective adsorption and separation of methylene blue by facily preparable xanthan gum/amantadine composites

In this work, xanthan gum-based composites were successfully graft-modified by amantadine (XG-Fe³⁺/AM) with higher adsorption capacity and selectivity on recycling cationic dye (methylene blue, MB) from aqueous solution. The adsorption equilibrium of MB could be achieved approximately within 5 min when the initial concentration was 100 mg/L, and the maximum adsorption capacity was up to 565 mg/g. After 5 desorption-regeneration cycles, the removal rate of XG-Fe³⁺/AM for MB could still be as high as 95 % with slight decrement. Additionally, the effects of pH, contact time, temperature and initial dye concentration on the adsorption performance of MB were systematically examined. Furthermore, the adsorbent was characterized by FT-IR, BET and XPS analysis. In mixed anionic and cationic dyes, the adsorption selectivity of XG-Fe³⁺/AM on MB in the mixture of MB and methyl orange (MO) reached up to 99.69 %. Molecular dynamics simulation revealed that the trend of adsorption energy for dyes was in good agreement of the experimental order of adsorption capacities and molecular sizes among seven anionic and cationic dyes based on molecular matching effect and electrostatic interaction. Therefore, XG-Fe³⁺/AM is an eco-friendly, facile-synthesis and high-selectivity adsorbent, which remove cationic dyes in multi-component systems through electrostatic interaction and molecular matching effect.

Combination mechanism of the ternary composite based on Fe3O4-chitosan-graphene oxide prepared by solvothermal method

Magnetic nanohybrid combining chitosan and graphene have demonstrated promising application in environmental remediation. Herein, ternary composite MCG based on Fe₃O₄, chitosan (CS) and graphene oxide (GO) was facilely prepared via solvothermal method. The as prepared composite was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman, Brunauer/Emmett/Teller-Barret/Joyner/Halenda (BET-BJH) and thermo gravimetric-differential thermal analysis (TG-DTA). The combination mechanism of MCG was unveiled via employing the hard-soft acid-base (HSAB) theory and spectroscopic investigations including X-ray photoelectron spectroscopy (XPS), Ultraviolet-visible (UV-Vis) and fluorescent emission spectra. Particularly, combination mechanism of MCG was elucidated by the probable site to site interaction of the couplet components in MCG, as follows. (1) CS-Fe₃O₄. The primary interaction is N(NH₂)-Fe(III), electron donates from N to Fe, transforming one half of the amino groups of chitosan into positive N⁺. (2) GO-CS. Amidation reaction is the primary interaction form, converting the other half of the amino groups of chitosan into -C(O)NH-. (3) GO-Fe₃O₄. Dominant interactions are those of epoxy, hydroxyl and aromatic ring with Fe(III). Moreover, MCG exhibits fair adsorption performance on divalent heavy metals in six consecutive cycles. These explorations may shed light on the design of efficient adsorbent based on Fe₃O₄-chitosan-graphene architecture.

A comprehensive review of food gels: formation mechanisms, functions, applications, and challenges

Gels refer to the soft and flexible macromolecular polymeric materials retaining a large amount of water or biofluids in their three-dimensional network structure. Gels have attracted increasing interest in the food discipline, especially proteins and polysaccharides, due to their good biocompatibility, biodegradability, nutritional properties, and edibility. With the advancement of living standards, people's demand for nutritious, safe, reliable, and functionally diverse food and even personalized food has increased. As a result, gels exhibiting unique advantages in food application will be of great significance. However, a comprehensive review of functional hydrogels as food gels is still lacking. Here, we comprehensively review the gel-forming mechanisms of food gels and systematically classify them. Moreover, the potential of hydrogels as functional foods in different types of food areas is summarized, with a special focus on their applications in food packaging, satiating gels, nutrient delivery systems, food coloring adsorption, and food safety monitoring. Additionally, the key scientific issues for future food gel research, with specific reference to future novel food designs, mechanisms between food components and matrices, food gel-human interactions, and food gel safety, are discussed. Finally, the future directions of hydrogels for food science and technology are summarized.

Fe3O4-doped silk fibroin-polyacrylamide hydrogel for selective and highly efficient absorption of cationic dyes pollution in water

Overuse of organic dyes has caused serious threats to the ecosystem and human health. However, the development of high-efficient, environmentally friendly, selective, and degradable cationic dye adsorbents remains a huge challenge. In this work, a novel Fe₃O₄nanoparticles doped silk fibroin-polyacrylamide magnetic hybrid hydrogel (Fe₃O₄@SF-PAAM) was successfully fabricated by combining free radical polymerization to prepare hydrogels andin situco-precipitation to prepare nanoparticles. The obtained Fe₃O₄@SF-PAAM hydrogel shows strong magnetic performance with saturated magnetic of 10.2 emu mg^-1and excellent swelling properties with a swelling ratio of 55867%. In addition, Fe₃O₄@SF-PAAM can adsorb cationic dyes such as methylene blue (MB), crystal violet, and Rhodamine B, but has no adsorption effect on anionic dyes such as methyl orange, congo red, and carmine, indicating that Fe₃O₄@SF-PAAM has good selective adsorption properties for cationic dyes. Interestingly, the adsorption capacity of Fe₃O₄@SF-PAAM was approached 2025 mg g^-1for MB (MB, a typical cation dye) at 25 °C and neutral. Meanwhile, the hybrid hydrogel is reusable, the removal rate for MB is still over 90% after the five adsorption-desorption cycles. The fabricated magnetic hybrid hydrogel is a kind of a highly-efficiency and eco-friendly adsorbent and presents great potential applications in water purification and environmental protection.