Sandwich-structured MXene@Au/polydopamine nanosheets with excellent photothermal-enhancing catalytic activity

Advances in MXene-based technologies for the remediation of toxic phenols: A comprehensive review

The pressing global issue of organic pollutants, particularly phenolic compounds derived primarily from industrial wastes, poses a significant threat to the environment. Although progress has been made in the development of low-cost materials for phenolic compound removal, their effectiveness remains limited. Thus, there is an urgent need for novel technologies to comprehensively address this issue. In this context, MXenes, known for their exceptional physicochemical properties, have emerged as highly promising candidates for the remediation of phenolic pollutants. This review aims to provide a comprehensive and critical evaluation of MXene-based technologies for the removal of phenolic pollutants, focusing on the following key aspects: (1) The classification and categorization of phenolic pollutants, highlighting their adverse environmental impacts, and emphasizing the crucial need for their removal. (2) An in-depth discussion on the synthesis methods and properties of MXene-based composites, emphasizing their suitability for environmental remediation. (3) A detailed analysis of MXene-based adsorption, catalysis, photocatalysis, and hybrid processes, showcasing current advancements in MXene modification and functionalization to enhance removal efficiency. (4) A thorough examination of the removal mechanisms and stability of MXene-based technologies, elucidating their operating conditions and stability in pollutant removal scenarios. (5) Finally, this review concludes by outlining future challenges and opportunities for MXene-based technologies in water treatment, facilitating their potential applications. This comprehensive review provides valuable insights and innovative ideas for the development of versatile MXene-based technologies tailored to combat water pollution effectively.

Dual pH- and ATP-Responsive Antibacterial Nanospray: On-Demand Release of Antibacterial Factors, Imaging Monitoring, and Accelerated Healing of Bacteria-Infected Wounds under NIR Activation

The prevalence of pathogenic bacterial infections with high morbidity and mortality poses a widespread challenge to the healthcare system. Therefore, it is imperative to develop nanoformulations capable of adaptively releasing antimicrobial factors and demonstrating multimodal synergistic antimicrobial activity. Herein, an NIR-activated multifunctional synergistic antimicrobial nanospray MXene/ZIF-90@ICG was prepared by incorporating ZIF-90@ICG nanoparticles onto MXene-NH2 nanosheets. MXene/ZIF-90@ICG can on-demand release the antimicrobial factors MXenes, ICG, and Zn2+ in response to variations in pH and ATP levels within the bacterial infection microenvironment. Under NIR radiation, the combination of MXenes, Zn2+, and ICG generated a significant amount of ROS and elevated heat, thereby enhancing the antimicrobial efficacy of PDT and PTT. Meanwhile, NIR excitation could accelerate the further release of ICG and Zn2+, realizing the multimodal synergistic antibacterial effect of PDT/PTT/Zn2+. Notably, introducing MXenes improved the dispersion of the synthesized antimicrobial nanoparticles in aqueous solution, rendering MXene/ZIF-90@ICG a candidate for application as a nanospray. Importantly, MXene/ZIF-90@ICG demonstrated antimicrobial activity and accelerated wound healing in the constructed in vivo subcutaneous Staphylococcus aureus infection model with NIR activation, maintaining a favorable biosafety level. Therefore, MXene/ZIF-90@ICG holds promise as an innovative nanospray for adaptive multimodal synergistic and efficient antibacterial applications with NIR activation.

Self-Healing Guar Gum-Based Nanocomposite Hydrogel Promotes Infected Wound Healing through Photothermal Antibacterial Therapy

Preventing bacterial infections is a crucial aspect of wound healing. There is an urgent need for multifunctional biomaterials without antibiotics to promote wound healing. In this study, we fabricated a guar gum (GG)-based nanocomposite hydrogel, termed GBTF, which exhibited photothermal antibacterial therapy for infected wound healing. The GBTF hydrogel formed a cross-linked network through dynamic borate/diol interactions between GG and borax, thereby exhibiting simultaneously self-healing, adaptable, and injectable properties. Additionally, tannic acid (TA)/Fe3+ nanocomplexes (NCs) were incorporated into the hydrogel to confer photothermal antibacterial properties. Under the irradiation of an 808 nm near-infrared laser, the TA/Fe3+ NCs in the hydrogel could rapidly generate heat, leading to the disruption of bacterial cell membranes and subsequent bacterial eradication. Furthermore, the hydrogels exhibited good cytocompatibility and hemocompatibility, making them a precandidate for preclinical and clinical applications. Finally, they could significantly promote bacteria-infected wound healing by reducing bacterial viability, accelerating collagen deposition, and promoting epithelial remodeling. Therefore, the multifunctional GBTF hydrogel, which was composed entirely of natural substances including guar gum, borax, and polyphenol/ferric ion NCs, showed great potential for regenerating infected skin wounds in clinical applications.

Self-powered biosensing platform for Highly sensitive detection of soluble CD44 protein

In this study, a self-powered biosensor based on an enzymatic biofuel cell was proposed for the first time for the ultrasensitive detection of soluble CD44 protein. The as-prepared biosensor was composed of the co-exist aptamer and glucose oxidase bioanode and bilirubin oxidase modified biocathode. Initially, the electron transfer from bioanode to biocathode was hindered due to the presence of the aptamer with high insulation, generating a low open-circuit voltage (EOCV). Once the target CD44 protein was present, it was recognized and captured by the aptamer at the bioanode, thus the interaction between the target CD44 protein and the immobilized aptamer caused the structural change at the surface of the electrode, which facilitated the transfer of electrons. The EOCV showed a good linear relationship with the logarithm of the CD44 protein concentrations in the range of 0.5-1000 ng mL-1 and the detection limit was 0.052 ng mL-1 (S/N = 3). The sensing platform showed excellent anti-interference performance and outstanding stability that maintained over 97% of original EOCV after 15 days. In addition, the relative standard deviation (1.40-1.96%) and recovery (100.23-101.31%) obtained from detecting CD44 protein in real-life blood samples without special pre-treatment indicated that the constructed biosensor had great potential for early cancer diagnosis.

Recent progress in magnetic polydopamine composites for pollutant removal in wastewater treatment

Various water pollution issues pose a significant threat to human water safety. Magnetic polydopamine composites (MPCs), which can be separated by magnetic fields after the adsorption process, exhibit outstanding adsorption capacity and heterogeneous catalytic properties, making them promising materials for water treatment applications. In particular, by modifying the polydopamine (PDA) coating, MPCs can acquire enhanced high reactivity, antibacterial properties, and biocompatibility. This also provides an attractive platform for further fabrication of hybrid materials with specific adsorption, catalytic, antibacterial, and water-oil separation capabilities. To systematically provide the background knowledge and recent research advances in MPCs, this paper presents a critical review of MPCs for water treatment in terms of both structure and mechanisms of effect in applications. Firstly, the impact of different PDA positions within the composite structure is investigated to summarize the optimization of properties contributed by PDA when acting as the shell, core, or bridge. The roles of various secondary modifications of magnetic materials by PDA in addressing water pollution problems are explored. It is anticipated that this work will be a stimulus for further research and development of magnetic composite materials with real-world application potential.

SiO2@AuAg/PDA hybrid nanospheres with photo-thermally enhanced synergistic antibacterial and catalytic activity

Wastewater discharged from industrial, agricultural and livestock production contains a large number of harmful bacteria and organic pollutants, which usually cause serious harm to human health. Therefore, it is urgent to find a "one-stone-two-birds" strategy with good antimicrobial and pollutant degradation activity for treating waste water. In this paper, SiO2@AuAg/Polydopamine (SiO2@AuAg/PDA) core/shell nanospheres, which possessed synergistic "Ag+-release-photothermal" antibacterial and catalytic behaviors, have been successfully prepared via a simple in situ redox polymerization method. The SiO2@AuAg/PDA nanospheres showed good catalytic activity in reducing 4-nitrophenol to 4-aminophenol (0.576 min-1 mg-1). Since the AuAg nanoclusters contain both gold and silver elements, they provided a high photothermal conversion efficiency (48.1%). Under NIR irradiation (808 nm, 2.5 W-2), the catalytic kinetics were improved by 2.2 times. Besides the intrinsic Ag+-release, the photothermal behavior originating from the AuAg bimetallic nanoclusters and the PDA component of SiO2@AuAg/PDA also critically improved the antibacterial performance. Both E. coli and S. aureus could be basically killed by SiO2@AuAg/PDA nanospheres at a concentration of 90 μg mL-1 under NIR irradiation. This "Ag+-release-photothermal" coupled sterilization offers a straightforward and effective approach to antimicrobial therapy, and further exhibits high potential in nanomedicine for combating bacterial contamination in environmental treatment and biological fields.

A MXene@AgAu@PDA nanoplatform loaded with AgAu nanocages for enhancing catalytic activity and antibacterial performance

With the rapid development of social industrialization, environmental problems seriously threaten people's health, especially water pollution. Therefore, there is an urgent need to construct a multifunctional nanoplatform for different scenarios. Two-dimensional MXene@AgAu@PDA nanosheets loaded with AgAu bimetallic nanocages have been prepared by a one-step method. First, the in situ generated MXene@Ag is used as an auxiliary template, and then HAuCl4 and dopamine are added for in situ redox-oxidizing polymerization reactions to obtain AgAu catalytic nanocages and the protective polydopamine (PDA) layer which can improve the stability and biocompatibility. MXene and PDA have excellent photothermal conversion ability while hollow AgAu nanocages have strong absorption in the near-infrared region and a local surface plasmonic resonance effect. In comparison to the catalytic reaction rates under dark and room temperature conditions, the catalytic kinetic rate of MXene@AgAu@PDA nanosheets under near-infrared irradiation increases from 0.13 to 0.69 min-1 mg-1. Density functional theory (DFT) is used to study the electron transfer behavior between AgAu nanocages and MXene nanosheets, and the mechanism of the enhanced catalytic reaction rate is analyzed. Besides, due to its Ag ions and photothermal coupling antibacterial properties, 40 μg mL-1 MXene@AgAu@PDA nanosheets inactivates nearly all E. coli and S. aureus after irradiation with near-infrared light for 6 min.

Bacteria-targeted photothermal therapy for combating drug-resistant bacterial infections

Photothermal therapy is an ideal non-invasive treatment for bacterial infections. However, if photothermal agents are unable to target bacteria, they can also cause thermal damage to healthy tissue. This study describes the fabrication of a Ti3C2Tx MXene-based photothermal nanobactericide (denoted as MPP) that targets bacteria by modifying MXene nanosheets with polydopamine and the bacterial recognition peptide CAEKA. The polydopamine layer blunts the sharp edges of MXene nanosheets, preventing their damage to normal tissue cells. Furthermore, as a constituent of peptidoglycan, CAEKA can recognize and penetrate the bacterial cell membrane based on similar compatibility. The obtained MPP exhibits superior antibacterial activity and high cytocompatibility compared to the pristine MXene nanosheets. In vivo studies showed that MPP colloidal solution under 808 nm NIR light can effectively treat a subcutaneous abscess caused by multi-drug resistant bacterial infection without adverse effects.

Synthesis and Catalytic Activity for 2, 3, and 4-Nitrophenol Reduction of Green Catalysts Based on Cu, Ag and Au Nanoparticles Deposited on Polydopamine-Magnetite Porous Supports

This work reports on the synthesis of nine materials containing Cu, Ag, Au, and Ag/Cu nanoparticles (NPs) deposited on magnetite particles coated with polydopamine (PDA). Ag NPs were deposited on two PDA@Fe3O4 supports differing in the thickness of the PDA film. The film thickness was adjusted to impart a textural porosity to the material. During synthesis, Ag(I) was reduced with ascorbic acid (HA), photochemically, or with NaBH4, whereas Au(III), with HA, with the PDA cathecol groups, or NaBH4. For the material characterization, TGA, XRD, SEM, EDX, TEM, STEM-HAADF, and DLS were used. The catalytic activity towards reduction of 4-, 3- and 2-nitrophenol was tested and correlated with the synthesis method, film thickness, metal particle size and NO2 group position. An evaluation of the recyclability of the materials was carried out. In general, the catalysts prepared by using soft reducing agents and/or thin PDA films were the most active, while the materials reduced with NaBH4 remained unchanged longer in the reactor. The activity varied in the direction Au > Ag > Cu. However, the Ag-based materials showed a higher recyclability than those based on gold. It is worth noting that the Cu-containing catalyst, the most environmentally friendly, was as active as the best Ag-based catalyst.

Bulk synthesis of conductive non-metallic carbon nanospheres and a 3D printed carrier device for scanning electron microscope calibration

Herein, a facile method is proposed for the bulk synthesis of conductive non-metallic carbon nanospheres with controllable morphology to replace conventional metal calibration reference materials (CRMs), such as gold nanoparticles and copper grids. The prepared nanospheres had an average diameter of ∼222 ± 23 nm, where silicon dioxide formed the core and the shell was comprised of the carbon layer. The structure of the conductive carbon nanospheres was characterized using FTIR, SEM, EDS and TEM. Additionally, an innovative design was demonstrated by 3D printing the calibration carrier device. Furthermore, the stability and image linear distortion of the conductive carbon nanospheres were verified using analysis of variance (ANOVA). The results demonstrated that the accelerating voltage, magnification, and various positions in the X/Y axes had no significant effect on measured diameter of nanospheres, which was evident from all the p values being greater than 0.05. The comprehensive set of results reveal that conductive carbon nanospheres have great potential to replace traditional CRMs.

Mussel - Inspired biosorbent combined with graphene oxide for removal of organic pollutants from aqueous solutions

In this work, we develop a mussel-inspired biosorbent combined with graphene oxide for removal of organic dyes in water sources. The composite was prepared via self-polymerization of dopamine in weak alkaline solution containing graphene oxide at ambient condition. Morphological and structural studies revealed that polydopamine has gradually grown to cover the surface of graphene oxide flakes, partially reduced these flakes, and somehow form many grains (size around 20 nm) on the flakes instead of making very large aggregates as usual. The mass ratio between two components of the composite was also investigated to find the optimal one which provides enough surface area (20 m².g^-1) and maintain adhesive sites in order to ensure high-efficiency removal of organic molecules. The adsorption kinetics and isotherms of as-prepared adsorbent towards methylene blue were found to fit well with pseudo-first order kinetics model and Langmuir isotherm. The maximum adsorption capacity (q_m) and Langmuir constant (k_L) were estimated to be 270 mg.g^-1 and 0.49 L. mg^-1. The as-prepared bio-sorbent is very promising for remediation of water sources contaminated with cationic organic molecules and heavy metal ions.

NIR-induced improvement of catalytic activity and antibacterial performance over AuAg nanorods in Rambutan-like Fe3O4@AgAu@PDA magnetic nanospheres

Pathogenic bacteria and difficult-to-degrade pollutants in water have been serious problems that always plague people. Therefore, finding a "one stone-two birds" method that can quickly catalyze the degradation of pollutants and show effective antibacterial behavior become an urgent requirement. This work reports a facile one-step strategy for fabricating a Rambutan-like Fe₃O₄@AgAu@PDA (Fe₃O₄@AgAu@Polydopamine) core/shell nanosphere with both catalytic and antibacterial activities which can be critically improved by externally applying an NIR laser irradiation (NIR, 808 nm) and a rotating magnetic field. Typically, the Rambutan-like Fe₃O₄@AgAu@PDA nanosphere have a rather rough surface due to the AuAg bimetallic nanorods sandwiched between the Fe₃O₄ core and the PDA shell. Owing to the penetrated PDA shell, AgAu nanorods show high and magnetically recyclable photothermal-enhanced catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol and they can also be applied to initiate TMB oxidation under the help of NIR heating condition. Moreover, Fe₃O₄@AgAu@PDA shows a moderate antibacterial activity due to the weak release of Ag⁺. Under applying a rotating external magnetic field, the rough-surface Fe₃O₄@AgAu@PDA nanospheres produce a controllable magnetolytic force on the bacterial due to their good affinity. As a result, the Fe₃O₄@AgAu@PDA nanospheres show a "magnetolytic-photothermal-Ag⁺" synergistic antibacterial behavior against E. coli and S. aureus.

AgPd nanocages sandwiched between a MXene nanosheet and PDA layer for photothermally improved catalytic activity and antibacterial properties

In this work, a MXene@AgPd/polydopamine (PDA) nanosheet with excellent photothermal conversion efficiency was successfully synthesized by a simple redox-oxidative polymerization method. Interestingly, AgPd bimetallic nanocrystals sandwiched between a MXene nanosheet and PDA layer have cage-like nanostructure, which is favorable for high catalytic efficiency and antibacterial performance. Importantly, the MXene@AgPd/PDA nanosheet exhibits good catalytic activity for the reduction of 4-nitrophenol (1.2 min^-1 mg^-1) and the catalytic dynamics can be improved by about 1.2 times under NIR (near-infrared light, 808 nm, and 2.5 W cm^-2) irradiation. As the PDA shell is well protected, the MXene@AgPd/PDA nanosheet retained more than 90% catalytic activity after 6 cycles. In addition, due to the presence of the Ag component, the MXene@AgPd/PDA nanosheet exhibited good antibacterial activity against both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Under near-infrared light irradiation, its antibacterial activity was further enhanced due to the NIR photothermal effect.

Architecting polyelectrolyte hydrogels with Cu-assisted polydopamine nanoparticles for photothermal antibacterial therapy

Polydopamine nanoparticles (PDA NPs) are an appealing biomimetic photothermal agent for photothermal antibacterial treatment because of their long-term safety, excellent photostability, accessible manufacturing, and good biodegradability. However, the low photothermal conversion efficiency (PCE) of PDA NPs requires high-power and long-term near-infrared light irradiation, which severely restricts their practical application. In this work, PDA@Cu NPs were fabricated by growing Cu NPs in situ on the surface of PDA and then introduced into a polyelectrolyte hydrogel precursor (cationic polyethyleneimine/anionic pectin, named as CPAP). The formulated photothermal platform possessed a high PCE (55.4%), almost twice as much as pure PDA NPs (30.8%). Moreover, the designed CPAP/PDA@Cu captured and killed some bacteria by electrostatic adsorption, which helped enhance the antibacterial performance. As expected, the formed CPAP/PDA@Cu that combined the advantageous features of PDA@Cu NPs (high PCE) and CPAP matrix (inherent antibacterial activity and preventing NPs aggregation) can efficiently kill bacteria both in vitro and in vivo under the help of near-infrared laser irradiation. Taken together, this study offers a promising strategy for constructing a facile and safe PDA-based photothermal agent for photothermal antibacterial therapy.

•

A facile polyelectrolyte photothermal antibacterial platform (CPAP) was synthesized.

•

CPAP is composed of polyethyleneimine, pectin and polydopamine@Cu nanoparticles.

•

CPAP displayed good biocompatibility and tunable physicochemical properties.

•

CPAP possessed outstanding high-efficiency bacteria-killing capability.