Sensitive fluorescence detection for hydrogen peroxide and glucose using biomass carbon dots: Dual-quenching mechanism insight

Recent Advances of carbon Pathways for Sustainable Environment development

Carbon dots (CDs) are an emerging type of carbon nanomaterial with strong biocompatibility, distinct chemical and physical properties, and low toxicity. CDs may emit fluorescence in the ultraviolet (UV) to near-infrared (NIR) range, which renders them beneficial for biomedical applications. CDs are usually made from carbon precursors and can be synthesized using top-down and bottom-up methods and it can be easily functionalized using different methods. For specific cases of biomedical applications carbon dot functionalization augments the materials' characteristics. Novel functionalization techniques are still being investigated. This review will look at the benefits of functionalization to attain a high yield and various biological applications. Biomedical applications such as photodynamic and photothermal therapy, biosensing, bioimaging, and antiviral and antibacterial properties will be covered in this review. The future applications of green synthesized carbon dots will be determined in part by this review.

Visual detection of H2O2 and glucose by HBcAb-HRP fluorescence-enhanced CdTe QDs/CDs ratiometric fluorescence sensing platform

This study presents the development of a sensitive and simple enhanced ratiometric fluorescence sensing platform in the consist of CdTe quantum dots (QDs), carbon dots (CDs), and hepatitis B core antibody labeled with horseradish peroxidase (HBcAb-HRP) for the visual analysis of H2O2 and glucose. The sulfur atoms in HBcAb-HRP have a strong affinity for Cd(II), which effectively enhances the fluorescence intensity of the CdTe QDs due to the generation of more radiative centers at the CdTe/Cd-SR complex. In the presence of H2O2, the Cd-S bonds are oxidized to form disulfide products and results in linear fluorescence quenching, while CDs maintain stable. Becasue glucose can be converted into H2O2 with the aid of glucose oxidase, this sensing platform can also be used for analyzing glucose. The detection limits for H2O2 and glucose are 2.9 μmol L-1 with RSD of 2.6% and 1.6 μmol L-1 with RSD of 2.4% respectively. In addition, under UV lamp irradiation, the orange-yellow CdTe QDs gradually quench with increasing H2O2 and glucose, while the blue CDs remain unchanged. A color change from orange-yellow to blue enables a visual semi-quantitative determination of H2O2 in commercial contact lens solution and glucose in human serum without any pretreatment. Thus, this CdTe QDs/CDs ratiometric sensing platform has significant potential for the rapid analysis of H2O2 and glucose in actual application.

An overview on animal/human biomass-derived carbon dots for optical sensing and bioimaging applications

Over the past decade, carbon dots (CDs) have emerged as some of the extremely popular carbon nanostructures for diverse applications. The advantages of sustainable CDs, characterized by their exceptional photoluminescence (PL), high water solubility/dispersibility, non-toxicity, and biocompatibility, substantiate their potential for a wide range of applications in sensing and biology. Moreover, nature offers plant- and animal-derived precursors for the sustainable synthesis of CDs and their doped variants. These sources are not only readily accessible, inexpensive, and renewable but are also environmentally benign green biomass. This review article presents in detail the production of sustainable CDs from various animal and human biomass through bottom-up synthetic methods, including hydrothermal, microwave, microwave-hydrothermal, and pyrolysis methods. The resulting CDs exhibit a uniform size distribution, possibility of heteroatom doping, surface passivation, and remarkable excitation wavelength-dependent/independent emission and up-conversion PL characteristics. Consequently, these CDs have been successfully utilized in multiple applications, such as bioimaging and the detection of various analytes, including heavy metal ions. Finally, a comprehensive assessment is presented, highlighting the prospects and challenges associated with animal/human biomass-derived CDs for multifaceted applications.

Integrated ratiometric luminescence sensing strategy based on encapsulation of guests in heterobinuclear lanthanide coordination polymer nanoparticles for glucose detection in human serum

Lanthanide coordination polymers (LnCPs) can be used as a host platform to encapsulate functional guest molecules for the construction of integrated sensing platforms. In this work, two guest molecules, rhodamine B (RhB) and glucose oxidase (GOx), were successfully encapsulated in a heterobinuclear lanthanide coordination polymer synthesized by self-assembly of Ce³⁺, Tb³⁺ and adenosine monophosphate (AMP) to form RhB&GOx@AMP-Tb/Ce. Both guest molecules show good storage stability and minimal leakage. The higher catalytic activity and stability of RhB&GOx@AMP-Tb/Ce is obtained due to the confinement effect compared to free GOx. RhB&GOx@AMP-Tb/Ce exhibits superior luminescence based on the internal tandem energy transfer process of the nanoparticles (Ce³⁺→Tb³⁺→RhB). Glucose can be oxidized in the presence of GOx to form gluconic acid and H₂O₂. Subsequently, Ce³⁺ in the AMP-Tb/Ce host structure can be oxidized by H₂O₂ to Ce⁴⁺, thereby interrupt the internal energy transfer process and cause ratiometric luminescence response. Benefiting from the synergistic effect, the smart integrated luminescent glucose probe exhibits a wide linear range (0.4-80 μM) and a low detection limit (74.3 nM) with high sensitivity, selectivity and simplicity, enabling the quantitative detection of glucose in human serum. This work describes a good strategy to construct an integrated luminescence sensor based on lanthanide coordination polymers.

Solvothermal synthesis of bifunctional carbon dots for tartrazine and Fe(III) detection from chamomile residue by ternary DES pretreatment

A ternary deep eutectic solvent (DES) consisting of choline chloride, lactic acid, and urea in a molar ratio of 1:2:2 was used to pretreat chamomile residue, followed by carbon dots (CDs) preparation using a one-pot solvothermal method. The CDs prepared under the suitable conditions had a high quantum yield of 47.34% and could be used as a bifunctional fluorescent probe for the detection of tartrazine and Fe(III). The concentration of tartrazine or Fe(III) had a good linear relationship with the fluorescence intensity of CDs that the determination coefficient (R²) was 0.9957 and 0.9943, and the limit of detection (LOD) was 40 nM and 119 nM, respectively. After verifying the different fluorescence quenching mechanisms of CDs by these two substances, a quantitative analysis was performed on real samples with recoveries of 90.70%∼104.29%. Overall, this study provided a promising technology for chemical conversion from low-cost chamomile residue to attractive bifunctional fluorescent probe.

Rapid and sensitive determination of Piroxicam by N-doped carbon dots prepared by plant soot

Piroxicam (PX) as a nonsteroidal anti-inflammatory drug (NSAID) can be effectively used for anti-inflammatory and analgesia. However, overdoses may induce side effects such as gastrointestinal ulcers and headaches. Therefore, the assay of piroxicam has considerable significance. In this work, nitrogen-doped carbon dots (N-CDs) was synthesized for PX detection. The fluorescence sensor was fabricated by hydrothermal method with plant soot and ethylenediamine. The strategy exhibited a detection range of 6-200 μg/mL and 250-700 μg/mL with the limited detection of 2 μg/mL. The mechanism of the PX assay base on the fluorescence sensor was the process of electron transfer between the PX and N-CDs. The assay subsequently demonstrated could be successfully used in actual sample. The results indicated that the N-CDs could be a superior candidate nanomaterial for piroxicam monitoring in the healthcare product industry.

CDs-Peroxyfluor Conjugation for Ratiometric Fluorescence Detection of Glucose and Shortening Its Detection Time from Reaction Dynamic Perspective

A ratiometric fluorescence probe based on the conjugation of peroxyfluor-NHS (PF) and carbon dots (CDs) was designed for selective and rapid detection of glucose. When glucose was catalytically oxidized by glucose oxidase (GOx), the product H₂O₂ would react with colorless and non-fluorescent peroxyfluor moiety to give the colored and fluorescent fluorescein moiety which would absorb the energy of CDs emission at 450 nm due to the Förster Resonance Energy Transfer (FRET) and generate a new emission peak at 517 nm. The reaction between PF and H₂O₂ was slow with a rate constant of about 2.7 × 10^-4 s^-1 under pseudo-first-order conditions (1 uM PF, 1 mM H₂O₂), which was unconducive to rapid detection. Given this, a short time detection method was proposed by studying the kinetics of the reaction between PF and H₂O₂. In this method, the detection time was fixed at three minutes. The linear detection of glucose could be well realized even if the reaction was partially done. As glucose concentration increased from 0.05 mM to 5 mM, the fluorescence intensity ratio (I₅₁₇/I₄₅₀) after 3 minutes' reaction of CDs-PF and glucose oxidation products changed linearly from 0.269 to 1.127 with the limit of detection (LOD) of 17.19 μM. In addition, the applicability of the probe in blood glucose detection was verified.

Biomass-Derived Carbon Dots and Their Sensing Applications

Carbon dots (CDs) can be widely used in the field of sensing because of its good water solubility, low toxicity, high fluorescence stability and excellent biocompatibility. It has become a popular trend to prepare high-value, inexpensive, renewable and environmentally friendly CDs sensors from biomass resources. This article reviewed the research progress of biomass-derived CDs as chemical, physical and biological sensors in recent years and studied their preparation processes and sensing abilities. Furthermore, the prospects and challenges of biomass-CDs sensors were discussed. This article is expected to provide inspirations for the design, preparation and application of biomass-CDs sensors in the future.

Glycine assists in efficient synthesis of herbal carbon dots with enhanced yield and performance

As a special type of biomass, herbal medicine often contains a variety of biologically active substances, and taking it as a carbon source, it is expected to produce various types of biologically functional carbon dots (CDs). However, there are few reports in this field, especially in achieving enhanced performance of CDs by improving the utilization efficiency of active substances in medicinal materials. In this work, by adding glycine as an auxiliary agent in the preparation of CDs from herbal medicine (Exocarpium Citri Grandis), the carboxyl and amino groups of the adjuvant provided more reactive sites, which greatly improved the yield of CDs (about 6 times). More importantly, the antioxidant and biological activities of herbal CDs were also improved. By controlling the functional groups of adjuvants, the effects of carboxyl and amino groups in adjuvants on the synthesis of herbal CDs were compared. The results reveal that both carboxyl and amino groups can react with the substances in the carbon source, and the influence of amino groups was greater. After adding glycine, the size of the CDs became larger, resulting from the more abundant functional groups on the carbon skeleton, which was the main reason for the improved performance of the CDs. Finally, the biological activity experiment demonstrated that CDs derived from Exocarpium Citri Grandis and glycine could greatly enhance the vitality of cells and activate immune cells, which are expected to be applied in the field of cell reproduction and biological immunity. The method proposed in this work provides a potential strategy for high-yield preparation of CDs from biomass.