Temperature–pH sensitivity of bovine serum albumin protein-microgels based on cross-linked poly(N-isopropylacrylamide-co-acrylic acid)

Thermo- and pH-Responsible Gels for Efficient Protein Adsorption and Desorption

Protein adsorption behavior was examined on poly(N-isopropylacrylamide-co-sodium methacrylate)-based hydrogels at different temperatures: 5, 20, and 37 °C, and pH: 4.5, 7, and 9.2. The hydrogels, whose covalent skeleton contains pendant anionic units due to the presence of the sodium methacrylate co-monomer, exhibited both thermo- and pH-sensitivity with different extents, which depended on the content of ionizable moieties and the cross-linker density. The hydrogel composition, temperature, and pH influenced the zeta potential of the hydrogels and their swelling properties. The proteins selected for the study, i.e., bovine serum albumin (BSA), ovalbumin (OVA), lysozyme (LYZ), and a monoclonal antibody (mAb2), differed in their aminoacidic composition and conformation, thus in isoelectric point, molecular weight, electrostatic charge, and hydrophobicity. Therefore, the response of their adsorption behavior to changes in the solution properties and the hydrogel composition was different. LYZ exhibited the strongest adsorption of all proteins with a maximum at pH 7 (189.5 mg ggel-1); adsorption of BSA and OVA reached maximum at pH 4.5 (24.4 and 23.5 mg ggel-1), whereas mAb2 was strongly adsorbed at 9.2 (21.7 mg ggel-1). This indicated the possibility of using the hydrogels for pH-mediated separation of proteins differing in charge under mild conditions in a water-rich environment of both the liquid solution and the adsorbed phase. The adsorption affinity of all proteins increased with temperature, which was attributed to the synergistic effects of attractive electrostatic and hydrophobic interactions. That effect was particularly marked for mAb2, for which the temperature change from 5 to 37 °C caused a twentyfold increase in adsorption. In all cases, the proteins could be released from the hydrogel surface by a reduction in temperature, an increase in pH, or a combination of both. This allows for the elimination of the use of salt solution as a desorbing agent, whose presence renders the recycling of buffering solutions difficult.

Preparation and characterization of lysozyme loaded cryogel for heavy metal removal

In the present study, monolithic poly(N-isopropylacrylamide-acrylamide)-acrilic acid (poly(npam-aam)-aac) cryogels were made. Swelling tests, SEM, XRD, and ATR-FTIR analyses revealed distinct cryogel and lysozyme-loaded cryogel properties. The equilibrium swelling degree was 6.2 g H2O/g cryogel. The created poly(npam-aam)-aac with pores of 10-100 μm was obviously seen in SEM images. Lysozyme adsorption capacity on poly(npam-aam)-aac was found to be 260 mg/g at pH 7.4 and 40 °C. After that, we used lysozyme adsorbed cryogel for the removal of the model heavy metal ion (cadmium). A series of pH, duration, and ionic strengths were used to conduct Cd2+ adsorption experiments. The results showed that the new adsorbent had a considerable chemical affinity for Cd2+ ions in its ability to bind them under eye ocular conditions (pH 7.4, 32-36 °C, 0,15 M NaCl). The traditional Langmuir adsorption model was the most suitable, achieving maximum uptake of ∼185 mg/g. Chemical adsorption was found to be the rate-controlling step, and the process was also compatible with the pseudo-second-order model. For the treatment of ocular pathologies, the most effective enzyme, lysozyme, must show its function. That is why there is a need for using lysozyme, and lysozyme is selected as a lignad to adsorb heavy metal ions because of its high heavy metal binding affinity. This material could be used for the treatment of ocular pathologies in the future.

In-Line Characterization of the Temperature-Responsive Behavior of Surface-Bound Microgel Coatings by QCM-D: A Novel Strategy for Protein Repellence Evaluation

In this work, quartz crystal microbalance with dissipation monitoring (QCM-D) was used to develop a new method to evaluate the protein repellency of microgel coatings. Compared to traditional protocols for surface analysis, QCM has the advantage of a real-time quantitative approach with high sensitivity, allowing us to describe variations of the adsorbed mass with unprecedented accuracy. To enable the detectability of the film throughout the whole operational temperature interval, a poly(N-isopropylacrylamide-co-glycidyl methacrylate) p(NIPAm-co-GMA) microgel monolayer with defined thickness and rigidity was designed. Covalent adhesion of the film to the silica surface was achieved by epoxy-thiol click chemistry and tested for repeated temperature cycles, showing substantial reproducibility. Further functionalization of microgel surfaces by grafting polyzwitterionic chains remarkably improved the protein repellence leaving the strong surface adhesion unaltered. Before and after exposure to fluorescein-tagged bovine serum albumin (FITC-BSA), the coatings showed identical responsive behavior, proving the absence of protein deposition. In nonrepellent coatings, QCM monitoring instead displayed a characteristic shift in the volume phase transition (VPT), pointing out the effect of adsorbed proteins on the swelling behavior of pNIPAm. The combination of QCM-D and UV-visible (UV-vis) was used to evaluate the effect of increasing surface coverage, enabling to distinguish between the protein deposition occurring over the coated and the uncoated portion of the sensor.

Drug-Induced Phase Separation in Polyelectrolyte Microgels

Polyelectrolyte microgels may undergo volume phase transition upon loading and the release of amphiphilic molecules, a process important in drug delivery. The new phase is “born” in the outermost gel layers, whereby it grows inward as a shell with a sharp boundary to the “mother” phase (core). The swelling and collapse transitions have previously been studied with microgels in large solution volumes, where they go to completion. Our hypothesis is that the boundary between core and shell is stabilized by thermodynamic factors, and thus that collapsed and swollen phases should be able to also coexist at equilibrium. We investigated the interaction between sodium polyacrylate (PA) microgel networks (diameter: 400–850 µm) and the amphiphilic drug amitriptyline hydrochloride (AMT) in the presence of NaCl/phosphate buffer of ionic strength (I) 10 and 155 mM. We used a specially constructed microscopy cell and micromanipulators to study the size and internal morphology of single microgels equilibrated in small liquid volumes of AMT solution. To probe the distribution of AMT micelles we used the fluorescent probe rhodamine B. The amount of AMT in the microgel was determined by a spectrophotometric technique. In separate experiments we studied the binding of AMT and the distribution between different microgels in a suspension. We found that collapsed, AMT-rich, and swollen AMT-lean phases coexisted in equilibrium or as long-lived metastable states at intermediate drug loading levels. In single microgels at I = 10 mM, the collapsed phase formed after loading deviated from the core-shell configuration by forming either discrete domains near the gel boundary or a calotte shaped domain. At I = 155 mM, single microgels, initially fully collapsed, displayed a swollen shell and a collapsed core after partial release of the AMT load. Suspensions displayed a bimodal distribution of swollen and collapsed microgels. The results support the hypothesis that the boundary between collapsed and swollen phases in the same microgel is stabilized by thermodynamic factors.

Temperature- and pH-responsive poly(N-isopropylacrylamide-co-methacrylic acid) microgels as a carrier for controlled protein adsorption and release

Herein, we report controlled protein adsorption and delivery of thermo- and pH-responsive poly(N-isopropylacrylamide-co-methacrylic acid) (PNIPAM-co-MAA) microgels at different temperatures, pH values and ionic strengths by employing bovine serum albumin (BSA) as a model protein. For these dual-responsive microgels, we found that the BSA adsorption was driven by several of six competing contributions, viz., physical diffusion (PD), hydrophobic interactions (HI), electrostatic attraction (EA), hydrogen bonding (HB) and temperature or pH-induced seizing action (SA_T or SA_pH), depending on the temperature and pH of the solution. Compared to the pure PNIPAM microgels, the higher swelling degree of the PNIPAM-co-MAA microgels allowed a large amount of BSA loading under any experimental conditions. A largest BSA adsorption of 45.1 μg mg^-1 was achieved at 40 °C and pH 4 due to the presence of all six contributions. The BSA adsorption and delivery could be further tuned by changing the crosslinking density within the microgels. The BSA binding onto the microgels was found to be ionic strength dependent, which could be attributed to the charge shielding of Na⁺ ions, salting out of BSA and aggregate formation of the microgels. The adsorbed BSA could be controllably released by adjusting the temperature and pH of the experiment, and with the help of sodium dodecyl sulphate (SDS) addition so as to eliminate each interaction between BSA and the microgels. Thus, this study can be useful to design a stimuli-responsive microgel-based carrier for controlled release of proteins.

Magnetic thermally sensitive interpenetrating polymer network (IPN) nanogels: IPN-pNIPAm@Fe2O3-SiO2

In this paper, iron oxide-silica@poly(acrylamide-co-N,N-diethylacrylamide)/poly(N,N-diethylacrylamide) interpenetrating polymer network (IPN-pNIPAm@Fe₂O₃-SiO₂) nanogels, possessing both magnetic and thermo-sensitive properties were successfully prepared. The preparation approach involved two steps, consisting of nanoparticle self-assembly and in situ polymerization with monomers. The structural combination of interpenetrating polymer networks (IPNs) with the Fe₂O₃-SiO₂ nanoparticles led to a synergistic property enhancement of both IPNs and nanoparticles, which could increase the mechanical strength of hydrogels and decrease the aggregation of nanoparticles. The synergistic effect was induced by the compatibility of these two individual components. Furthermore, the swelling and shrinking behaviors of the IPN-pNIPAm@Fe₂O₃-SiO₂ nanogels revealed the reversible thermo-responsive properties of IPN nanogels. This fabrication approach for IPN-pNIPAm@Fe₂O₃-SiO₂ nanogels can provide a facile route for manufacturing smart nanocomposites with stability in aqueous solution and reversible swelling/deswelling stimuli-responsive properties to achieve multifunctional tasks in clinical therapy.

In this paper, iron oxide-silica@poly(acrylamide-co-N,N-diethylacrylamide)/poly(N,N-diethylacrylamide) interpenetrating polymer network (IPN-pNIPAm@Fe₂O₃-SiO₂) nanogels, possessing both magnetic and thermo-sensitive properties were successfully prepared.

Effects of charge contrast and composition on microgel formation and interactions with bacteria-mimicking liposomes

Microgels offer opportunities for improved delivery of antimicrobial peptides (AMP). To contribute to a foundation for rational design of such systems, we here study the effects of electrostatics on the generation of peptide-carrying microgels. For this, alginate microgels loaded with polymyxin B and cross-linked by Ca²⁺, were formed by electrostatic complexation using a hydrodynamic focusing three-dimensional (3D)-printed micromixer, varying pH and component concentrations. The structure of the resulting composite nanoparticles was investigated by small-angle X-ray scattering, dynamic light scattering, and z-potential measurements, whereas peptide encapsulation and release was monitored spectrophotometrically. Furthermore, membrane interactions of these systems were assessed by dye leakage assays in model lipid vesicles. Our results indicate that charge contrast between polymyxin B and alginate during microgel formation affects particle size and network dimensions. In particular, while microgels prepared at maximum polymyxin B-alginate charge contrast at pH 5 and 7.4 are characterized by sharp interfaces, those formed at pH 9 are characterized by a more diffuse core, likely caused by a weaker peptide-polymer affinity, and a shell dominated by alginate that shrinks at high CaCl₂ concentrations. Quantitatively, however, these effects were relatively minor, as were differences in peptide encapsulation efficiency and electrolyte-induced peptide release. This demonstrates that rather wide charge contrasts allow efficient complexation and particle formation, with polymyxin B encapsulated within the particle interior at low ionic strength, but released at high electrolyte concentration. As a consequence of this, peptide-mediated membrane destabilization were suppressed by microgel incorporation at low ionic strength, but regained after microgel disruption. After particle disruption at high ionic strength, however, some polymyxin B was found to remain bound to alginate chains from the disrupted composite microgel particles, resulting in partial loss in membrane interactions, compared to the free peptide.

Thermosensitive Display of Carbohydrate Ligands on Microgels for Switchable Binding of Proteins and Bacteria

The synthesis of carbohydrate-functionalized thermosensitive poly(N-isopropylacrylamide) microgels and their ability to bind carbohydrate-binding pathogens upon temperature switch are reported. It is found that the microgels' binding affinity is increased above their lower critical solution temperature (LCST), enabling thermo-triggerable capture of pathogens. Here, a series of microgels with comparatively low mannose functionalization degrees below 1 mol % is achieved by a single polymerization step. Upon increase in mannose density, the microgel size increases, and the LCST decreases to 26 °C. Clustering with concanavalin A indicated that binding affinity is enhanced by a higher mannose content and by raising the temperature above the LCST. Binding studies with Escherichia coli confirm stronger specific interactions above the LCST and formation of mechanically stable aggregates enabling efficient separation of E. coli by filtration. For small incubation times above the LCST, the microgels' potential to release pathogens again below the LCST is confirmed also. Compared to existing switchable scaffolds, microgels nearly entirely composed of a thermosensitive material undergo a large change in volume, which allows them to drastically vary the density of ligands to switch between capture and release. This straightforward yet novel approach is likely compatible with a broad range of bioactive ligands. Therefore, thermosensitive microgels represent a promising platform for the specific capture or release of cells or pathogens.

Controlled protein adsorption and delivery of thermosensitive poly(N-isopropylacrylamide) nanogels

Controlled protein adsorption and delivery of thermosensitive poly(N-isopropylacrylamide) nanogels by tailoring the temperature and pH value of the medium.

Engineering Systems with Spatially Separated Enzymes via Dual-Stimuli-Sensitive Properties of Microgels

This work examines the adsorption regime and the properties of microgel/enzyme thin films deposited onto conductive graphite-based substrates. The films were formed via two-step sequential adsorption. A temperature- and pH-sensitive poly(N-isopropylacrylamide)-co-(3-(N,N-dimethylamino)propylmethacrylamide) microgel (poly(NIPAM-co-DMAPMA microgel) was adsorbed first, followed by its interaction with the enzymes, choline oxidase (ChO), butyrylcholinesterase (BChE), or mixtures thereof. By temperature-induced stimulating both (i) poly(NIPAM-co-DMAPMA) microgel adsorption at T > VPTT followed by short washing and drying and then (ii) enzyme loading at T < VPTT, we can effectively control the amount of the microgel adsorbed on a hydrophobic interface as well as the amount and the spatial localization of the enzyme interacted with the microgel film. Depending on the biomolecule size, enzyme molecules can (in the case for ChO) or cannot (in the case for BChE) penetrate into the microgel interior and be localized inside/outside the microgel particles. Different spatial localization, however, does not affect the specific enzymatic responses of ChO or BChE and does not prevent cascade enzymatic reaction involving both BChE and ChO as well. This was shown by the methods of electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and amperometric analysis of enzymatic responses of immobilized enzymes. Thus, a novel simple and fast strategy for physical entrapment of biomolecules by the polymeric matrix was proposed, which can be used for engineering systems with spatially separated enzymes of different types.

Functional microgels assisted tryptic digestion and quantification of cytochrome c through internal standard mass spectrometry

Quantitation of cytochrome c (Cyt c) in cell lysates through surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) using gold nanoparticles (Au NPs) as the matrix and GR-10 peptide as an internal standard has been demonstrated. To shorten digestion time, temperature sensitive microgels containing trypsin (TR) and Au NPs have been employed. As-prepared functional microgels (TR/Au NPs/MGs) allow digestion of Cyt c within 15 s under microwave irradiation. The internal standard SALDI-MS approach provides linearity (R(2) = 0.98) of MS signal ratio (I 1168.6/I 1067.6) of the tryptic digested peptide (m/z 1168.6) to GR-10 peptide (m/z 1067.6) against the concentration of Cyt c ranging from 25 to 200 nM, with a limit of detection (at a signal-to-noise ratio of 3) of 10 nM. This approach has been validated by the analysis of the lysates of HeLa cells, with an average concentration of 13.7 ± 3.5 μM for cytoplasmic Cyt c. Increased concentrations of Cyt c in the HeLa cells treated with etoposide (a commercial drug) or carbon dots (potential drug) have been revealed through this simple, sensitive, and rapid SALDI-MS approach, supporting the drugs induced Cyt c-mediated apoptosis of the cells. This study has shown that this internal standard SALDI-MS approach holds great potential for cell study.

Sono-respond on thermosensitive polymer microgels based on cross-linked poly(N-isopropylacrylamide-co-acrylic acid)

Ultrasound (US) exposure strongly influenced thermosensitivity of microgels attracted with both N-isopropylacrylamide (NIPAM) and acrylic acid (AA) segments, due to that hydrogen bonds of carboxylic acid segments in microgels were broken by US and then the hydration with water occurred. US induced critical effects on the volume phase transition temperature of the swelled NIPAM gel (PNAM). It was observed after the US exposure that the particle size was increased and the phase transition of the microgels shifted toward larger temperature regions of the hydrodynamic diameter. FT-IR spectroscopic data of the swelled microgel showed that the free OH stretching band intensity of the COOH segments was enhanced by the exposure, but the band intensity returned to its original level without the US exposure. This meant that the US stimulus broke hydrogen bonding of the microgel and induced hydration of water in the hydrogel environment. Finally, regeneration of the hydrogen bonds in the microgel was occurred after the US exposure.

Thermoresponsive nanogels for prolonged duration local anesthesia

Nanogels based on poly(N-isopropylacrylamide) are attractive vehicles for prolonged duration local anesthesia because of their tunable size, number of functional groups, thermoresponsiveness and anionic charge. Nerve block durations of up to 9h were achieved using acrylic acid-loaded nanogels loaded with bupivacaine. Increasing the anionic charge density of the nanogels or (for more highly acid-functionalized nanogels) decreasing the nanogel size facilitated longer duration of anesthetic release. Small (<300 nm diameter) nanogels formed dense aggregates upon injection in vivo and induced only mild inflammatory responses, while large (>500 nm diameter) nanogels typically remained as liquid-like residues in vivo and induced more severe inflammatory reactions.

Preparation and characterization of nanosized P(NIPAM-MBA) hydrogel particles and adsorption of bovine serum albumin on their surface

Thermosensitive polymer hydrogel particles with size varying from 480 to 620 nm were prepared through precipitation copolymerization of N-isopropylacrylamide with N,N'-methylenebisacrylamide (MBA) in water with ammonium persulfate as the initiator. Only polymer hydrogels without any coagula were obtained when MBA concentration in the monomer mixture was kept between 2.5 and 10.0 wt%; with increased MBA concentration, the monomer conversion was enhanced, the size of the hydrogels was increased, and their shrinking was lessened when heated from 25°C to 40°C. Bovine serum albumin adsorption on the surface of the hydrogels of different MBA content was measured at different pH levels and under different temperatures. The results demonstrated that the adsorption of the protein on the hydrogels could be controlled by adjusting the pH, the temperature of adsorption, and the crosslinking in the hydrogels. The results were interpreted, and the mechanisms of the polymerization were proposed.

Multicore-shell PNIPAm-co-PEGMa microcapsules for cell encapsulation

The overall goal of this study was to fabricate multifunctional core-shell microcapsules with biological cells encapsulated within the polymer shell. Biocompatible temperature responsive microcapsules comprised of silicone oil droplets (multicores) and yeast cells embedded in a polymer matrix (shell) were prepared using a novel microarray approach. The cross-linked polymer shell and silicone multicores were formed in situ via photopolymerization of either poly(N-isopropylacryamide)(PNIPAm) or PNIPAm, copolymerized with poly(ethylene glycol monomethyl ether monomethacrylate) (PEGMa) within the droplets of an oil-in-water-in-oil double emulsion. An optimized recipe yielded a multicore-shell morphology, which was characterized by optical and laser scanning confocal microscopy (LSCM) and theoretically confirmed by spreading coefficient calculations. Spreading coefficients were calculated from interfacial tension and contact angle measurements as well as from the determination of the Hamaker constants and the pair potential energies. The effects of the presence of PEGMa, its molecular weight (M(n) 300 and 1100 g/mol), and concentration (10, 20, and 30 wt %) were also investigated, and they were found not to significantly alter the morphology of the microcapsules. They were found, however, to significantly improve the viability of the yeast cells, which were encapsulated within PNIPAm-based microcapsules by direct incorporation into the monomer solutions, prior to polymerization. Under LSCM, the fluorescence staining for live and dead cells showed a 30% viability of yeast cells entrapped within the PNIPAm matrix after 45 min of photopolymerization, but an improvement to 60% viability in the presence of PEGMa. The thermoresponsive behavior of the microcapsules allows the silicone oil cores to be irreversibly ejected, and so the role of the silicone oil is 2-fold. It facilitates multifunctionality in the microcapsule by first being used as a template to obtain the desired core-shell morphology, and second it can act as an encapsulant for oil-soluble drugs. It was shown that the encapsulated oil droplets were expelled above the volume phase transition temperature of the polymer, while the collapsed microcapsule remained intact. When these microcapsules were reswollen with an aqueous solution, it was observed that the hollow compartments refilled. In principle, these hollow-core microcapsules could then be filled with water-soluble drugs that could be delivered in vivo in response to temperature.

Microgels and microcapsules in peptide and protein drug delivery

The present review focuses on the interaction of microgels and microcapsules with biological macromolecules, particularly peptides and proteins, as well as drug delivery applications of such systems. Results from recent studies on factors affecting peptide/protein binding to, and release from, microgels and related systems are discussed, including effects of network properties, as well as protein aggregation, peptide length, hydrophobicity and charge (distributions), secondary structure, and cyclization. Effects of ambient conditions (pH, ionic strength, temperature, etc.) are also discussed, all with focus on factors of importance for the performance of microgel and microcapsule delivery systems for biomacromolecular drugs.

Tunable Encapsulation of Proteins within Charged Microgels

The binding of cytochrome c to pH and thermoresponsive colloidal hydrogels was investigated using multiangle light scattering, measuring loading through changes in particle molar mass and root mean square radius. Loosely cross-linked microgels [composed of a random copolymer of N-isopropylacrylamide (NIPAm) and acrylic acid (AAc)] demonstrated a high loading capacity for protein. Encapsulation was dependent on both the charge characteristics of the network and the salinity of the medium. Under favorable binding conditions (neutral pH, low ionic strength), microgels containing the highest studied charge density (30 mol% AAc) were capable of encapsulating greater than 9.7 × 10(5) cytochrome c molecules per particle. Binding resulted in the formation of a polymer-protein complex and condensation of the polymer. Anionic microgels demonstrated a change in density ~20-fold in the presence of oppositely charged proteins. These studies of cytochrome c encapsulation represent a significant step towards direct measurement of encapsulation efficiency in complex media as we pursue responsive nanogels and microgels for the delivery of macromolecular therapeutic agents.

The dual temperature/pH-sensitive multiphase behavior of poly(N-isopropylacrylamide-co-acrylic acid) microgels for potential application in in situ gelling system

Poly(N-isopropylacrylamide-co-acrylic acid) microgels (PNA) may be an excellent formulation for in situ gelling system due to their high sensitivity and fast response rate. Four monodispersed PNA microgels with various contents of acrylic acid (AA) were synthesized by emulsion polymerization in this paper. Their hydrodynamic diameters decreased reversibly with both decreasing pH and increasing temperature. The dual temperature/pH-sensitivity was influenced by many factors such as AA content, cross-link density and ion strength. In addition, high concentration PNA dispersions underwent multiple phase transition according to different temperatures, pHs and concentrations, which were summarized in a 3D sol-gel phase diagram in this study. According to the sol-gel phase transition, 8% PNA-025 dispersion maintained a relatively low viscosity and favorable fluidity at pH 5.0 in the temperature range of 25-40°C, but it rapidly increased in viscosity at pH 7.4 and gelled at 37°C. This feature enabled the dual temperature/pH-sensitive microgels to overcome the troubles in syringing of temperature sensitive materials during the injection. Apart from this, PNA could form gel well in in vitro (e.g., medium and serum) and in in vivo with low cytotoxicity. Therefore, it is promising for PNA to be applied in the in situ gelling system.

Influence of architecture on the interaction of negatively charged multisensitive poly(N-isopropylacrylamide)-co-methacrylic acid microgels with oppositely charged polyelectrolyte: absorption vs adsorption

Two sets of core-shell microgels composed of temperature-sensitive poly(N-isopropylacrylamide) (PNiPAM) with different spatial distribution of pH-sensitive methacrylic acid (MAA) groups were prepared. The cores consist of either PNiPAM (neutral core; nc) or PNiPAM-co-MAA (charged core; cc). A charged shell existing of PNiPAM-co-MAA was added to the neutral core (yielding neutral core-charged shell; nccs), on the charged core, on the other hand, a neutral shell of PNiPAM was added (charged core-neutral shell; ccns). Complexes of these microgels with positively charged poly(diallyldimethylammonium chloride) (PDADMAC) of different molar masses were prepared. The amount of bound polyelectrolyte was quantified, and the microgel-polyelectrolyte complexes were characterized with respect to electrophoretic mobility and hydrodynamic radius. The penetration of polyelectrolyte into the microgel was also monitored by means of lifetime analysis of a fluorescent dye covalently bound to poly(L-lysine) providing information on the probe's local environment. The architecture of the microgel has a significant influence on the interaction with oppositely charged polyelectrolyte. Complexes with microgel with the charged shell tend to flocculate at charge ratios of 1 and are thus similar to polyelectrolyte complexes with rigid colloidal particles. Complexes with microgels that consist of a charged core and a neutral shell show very different properties: They are still temperature sensitive and reveal an influence of the polyelectrolyte's chain length. Low molecular weight PDADMAC can penetrate through the neutral shell into the charged core, and thus nearly no charge reversal occurs. The high-MW polyelectrolyte does not penetrate fully and leads to charge reversal. The results demonstrate that microgels are able to absorb or adsorb polyelectrolytes depending on the polyelectrolyte's chain length and the microgels architecture. Complexes with different surface properties and different colloidal stability can be prepared, and polyelectrolytes can be encapsulated in the microgel core. Thus, multisensitive core-shell microgels combine permeability and compartmentalization on a nanometer length scale and provide unique opportunities for applications in controlled uptake and release.

A pH-responsive poly(N-isopropylacrylamide-co-acrylic acid) hydrogel for the selective isolation of hemoglobin from human blood

A pH-responsive poly(N-isopropylacrylamide-co-acrylic acid) hydrogel was prepared by an aqueous dispersion polymerization process. The number of carboxylic groups distributed on the surface of the hydrogel was found to be 1.89 mmol g(-1). The hydrogel exhibits excellent binding selectivity to the protein species of interest within certain pH regions. In the present work, it was applied to the selective isolation of hemoglobin from human whole blood. Some important experimental parameters governing the sorption property, including the pH of sample solution, the ionic strength and sorption time, were investigated. Using 2.0 mg of the hydrogel as a sorption medium and suitable acidity of pH 6.0, a sorption efficiency of 93% was achieved for 200 microg mL(-1) of hemoglobin in 1.0 mL of sample solution. Afterwards, the absorbed hemoglobin could be readily recovered using 1.0 mL of Tris-HCl buffer (pH 8.6, 0.01 mol L(-1)), giving rise to recovery of ca. 76%. The practical applicability of this system was further demonstrated by processing human whole blood for the isolation of hemoglobin, and satisfactory results were obtained by assay with SDS-PAGE.

Binding and release of consensus peptides by poly(acrylic acid) microgels

The interaction between positively charged consensus peptides and poly(acrylic acid) microgels was investigated with micromanipulator-assisted light microscopy and confocal laser scanning microscopy. Peptide binding and release was monitored by microgel deswelling and swelling for monodisperse multiples of heparin-binding Cardin and Weintraub motifs, (AKKARA)(n) (1 <or= n <or= 4) and (ARKKAAKA)(n) (1 <or= n <or= 3), as well as the corresponding titratable (AHHAHA)(4) and (AHHHAAHA)(3) peptides (A, K, R and H, refering to alanine, lysine, arginine, and histidine, respectively). When fully charged, these peptides distribute homogenously throughout the microgels and display concentration-dependent deswelling, which increases with increasing peptide length. Both (AKKARA)(4) and (ARKKAAKA)(3) display potent and fast microgel deswelling but only marginal subsequent electrolyte-induced desorption. In contrast, reducing the peptide charge for (AHHAHA)(4) and (AHHHAAHA)(3) at neutral and high pH, or the peptide length, substantially reduces the peptide affinity for the microgels and facilitates rapid peptide release. Taken together, the results also show that quite short peptides of moderate charge density interact strongly and cause extensive gel deswelling of oppositely charged microgels, precluding peptide release. They also show, however, that desirable triggered release can be achieved with peptides of lower charge density.

Preparation and characterization of temperature and pH-sensitive chitosan material and its controlled release on coenzyme A

A novel copolymer P(CS-Ma-DMAEMA) was synthesized with chitosan (CS), maleic anhydride (Ma) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) by grafting and copolymerization. The copolymer obtained was analyzed by FT-IR, (1)H NMR and UV, and the molecular weight and polydispersity were determined by gel permeation chromatography (GPC). The average size and distribution of copolymer micelles were determined by dynamic light scattering (DLS). Their aqueous solution properties and controlled coenzyme A delivery were also studied. It was found that the copolymer had temperature sensitivity and pH sensitivity. The factors affecting release behavior, such as concentration, pH and temperature were discussed in this paper. The higher concentration of the copolymer aqueous solution absorbed more coenzyme A than the lower one. The increasing temperature accelerated the drug release from the copolymer. The pH of the copolymer solution had significant impact on the release of coenzyme A. The results suggested that the novel copolymer could be used as drug delivery carrier.