Surface active properties of chitosan and its derivatives

Synthesis of new quaternized chitosan Schiff bases and their N-alkyl derivatives as antimicrobial and anti-biofilm retardants in membrane technology

New quaternized salicylidene chitosan Schiff bases (QSCSBs) and their N-octyl derivatives (OQCs) have been synthesized and characterized, aiming to develop innovative antimicrobial and anti-biofilm agents. This research holds immense potential, as these compounds could be utilized as anti-biofouling additives in membrane technology in the future. The synthesis involved the modification of low molecular-weight-chitosan (LMC) through simultaneous Schiff base formation and quaternization processes to create QSCSBs. Subsequently, QSCSBs were catalytically reduced to form quaternized N-benzyl chitosan (QBCs) intermediates, which then underwent nucleophilic substitution reactions affording N-octyl quaternized chitosans (OQCs). Characterization techniques such as elemental, spectral, and microscopic analyses were used to confirm the successful synthesis of these materials. As membrane technology relies on surface charge, QSCSBs and OQCs with large zeta potentials could be used as positively charged additives. Moreover, SEM image revealed the regular distribution of pores and voids across the additives' surfaces raises intriguing questions about their implications for membrane performance. Meanwhile, the superior antibacterial and antibiofilm potential of these materials, particularly QSCSB2 and OQC2, indicate that the utilization of these compounds as anti-biofouling additives in membrane technology could significantly improve the performance and longevity of membranes used in various applications such as water treatment and desalination.

Synergism of polysaccharide polymers in antihistamine eye drops: Influence on physicochemical properties and in vivo efficacy

The incorporation of polymers into drug delivery vehicles has been shown to be a useful approach to prolong the residence time of drugs in the precorneal tear film and to improve penetration into biological membranes. The main objective of this research was to formulate novel viscous eye drops with ketotifen as the active ingredient, containing the polysaccharides: chitosan (MCH), hydroxypropyl guar gum (HPG) and hyaluronic acid (SH) alone and in combination as functional polymers. DSC and FT-IR techniques showed the compatibility between ketotifen and polymers. Physicochemical and rheological analysis at ambient and simulated physiological conditions, as well as the evaluation of mucoadhesive properties showed that vehicles containing combinations of polymers have suitable physicochemical and functional properties with demonstrated synergism between combined polymers (MCH and HPG i.e. SH and HPG). The drug permeability was successfully estimated in vitro using HCE-T cell-based models. MTT cytotoxicity assay demonstrates that the tested formulations were non-toxic and well tolerated. In vivo preclinical study on mice revealed that both vehicles containing mixed polymers enhanced and prolonged the antipruritic/analgesic-like effect of ophthalmic ketotifen. Based on these results, both combinations of polysaccharide polymers, especially SH-HPG, could be considered as potential new carriers for ketotifen for ophthalmic use.

Antibacterial effects of chitosan-based hydrogels containing Trachyspermum ammi essential oil on pathogens isolated from dogs with otitis externa

BACKGROUND

Growing antibiotic resistance has made treating otitis externa (OE) increasingly challenging. On the other hand, local antimicrobial treatments, especially those that combine essential oils (EOs) with nanoparticles, tend to be preferred over systemic ones. It was investigated whether Ajwain (Trachyspermum ammi) EO, combined with chitosan nanoparticles modified by cholesterol, could inhibit the growth of bacterial pathogens isolated from OE cases in dogs. In total, 57 dogs with clinical signs of OE were examined and bacteriologically tested. Hydrogels of Chitosan were synthesized by self-assembly and investigated. EO was extracted (Clevenger machine), and its ingredients were checked (GC-MS analysis) and encapsulated in chitosan-cholesterol nanoparticles. Disc-diffusion and broth Micro-dilution (MIC and MBC) examined its antimicrobial and therapeutic properties.

RESULTS

Staphylococcus pseudintermedius (49.3%) was the most common bacteria isolated from OE cases, followed by Pseudomonas aeruginosa (14.7%), Escherichia coli (13.3%), Streptococcus canis (9.3%), Corynebacterium auriscanis (6.7%), Klebsiella pneumoniae (2.7%), Proteus mirabilis (2.7%), and Bacillus cereus (1.3%). The investigation into the antimicrobial properties of Ajwain EO encapsulated in chitosan nanoparticles revealed that it exhibited a more pronounced antimicrobial effect against the pathogens responsible for OE.

CONCLUSIONS

Using chitosan nanoparticles encapsulated with EO presents an effective treatment approach for dogs with OE that conventional antimicrobial treatments have not cured. This approach not only enhances antibacterial effects but also reduces the required dosage of antimicrobials, potentially preventing the emergence of antimicrobial resistance.

Bio-based surfactants derived from pectin

Surfactants derived from renewable resources and synthesized using renewable feedstock and sustainable methods have become a major research focus over the past decade in the surfactant industry. This research presents an approach for rapidly converting readily available polysaccharides, like pectin derived from fruit waste, into safely biodegradable surface-active polymers. Commercially available pectin was modified with n-alkyl amines having different alkyl chain lengths using potassium carbonate as a catalyst. The effect of pectin molecular weight, alkyl chain length and degree of substitution (DS) on surface-active properties of the modified pectin derivatives was studied. Surface tension decreased slightly with lowering molecular weight, whereas interfacial tension decreased dramatically. Cytotoxicity evaluations using human dermal fibroblast, HepG2 and Jurkat cells demonstrated that these polysaccharide-based surfactants exhibit lower cytotoxicity compared to the conventional surfactants such as octyl phenol ethoxylates (i.e., Triton™ X-100), and therefore are more environmentally friendly. Biodegradation studies show that all modified pectins are "ultimately biodegradable" except for Pectin-amide C8 (1:10).

Design and characterization of dexamethasone phosphate -loaded microcapsules obtained by a double-emulsion method

Polymeric microcapsules are extensively investigated as drug delivery systems for a broad range of applications. In the present study, Dexamethasone-loaded carboxylated chitosan (CCS)/poly (vinyl alcohol) (PVA)-based microcapsules were prepared in view of their potential administration by inhalation for the treatment of lung diseases. The crosslinking between PVA and CCS was activated by [4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride] (DMT-MM) and the FTIR results proved the formation of ester bonds between the two polymers. The sizes of the obtained microcapsules are influenced by the ratio between the polymers but also by the concentration of the DMT-MM activator. Moreover, the amount of PVA in the system has an important influence on swelling degree, encapsulation efficiency, drug release degree, biodegradation and protein adsorption. The sample with the highest amount of PVA has the highest crosslinking density and thus the lowest swelling degree and encapsulation efficiency. However, an encapsulation degree of 61.3% was obtained for the sample MCP-6 with the lowest PVA content. The same sample showed the lowest BSA adsorption. A controlled and sustained Dexamethasone release of around 90% was observed in PBS at pH 7.4 and 37°C during 24 h. All the obtained samples were hemocompatibles and thus can be used as efficient drug delivery systems.

Preparation and Surface Characterization of Chitosan-Based Coatings for PET Materials

Poly(ethylene terephthalate)-PET-is one of the most frequently used polymers in biomedical applications. Due to chemical inertness, PET surface modification is necessary to gain specific properties, making the polymer biocompatible. The aim of this paper is to characterize the multi-component films containing chitosan (Ch), phospholipid 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), immunosuppressant cyclosporine A (CsA) and/or antioxidant lauryl gallate (LG) which can be utilized as a very attractive material for developing the PET coatings. Chitosan was employed owing to its antibacterial activity and also its ability to promote cell adhesion and proliferation favorable for tissue engineering and regeneration purposes. Moreover, the Ch film can be additionally modified with other substances of biological importance (DOPC, CsA and LG). The layers of varying compositions were prepared using the Langmuir-Blodgett (LB) technique on the air plasma-activated PET support. Then their nanostructure, molecular distribution, surface chemistry and wettability were determined by atomic force microscopy (AFM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), X-ray photoelectron spectroscopy (XPS), contact angle (CA) measurements and the surface free energy and its components' determination, respectively. The obtained results show clearly the dependence of the surface properties of the films on the molar ratio of components and allow for a better understanding of the coating organization and mechanisms of interactions at the molecular level both inside the films and between the films and the polar/apolar liquids imitating the environment of different properties. The organized layers of this type can be helpful in gaining control over the surface properties of the biomaterial, thus getting rid of the limitations in favor of increased biocompatibility. This is a good basis for further investigations on the correlation of the immune system response to the presence of biomaterial and its physicochemical properties.

Chitosan-Based Biomaterials: Insights into Chemistry, Properties, Devices, and Their Biomedical Applications

Chitosan is a marine-origin polysaccharide obtained from the deacetylation of chitin, the main component of crustaceans’ exoskeleton, and the second most abundant in nature. Although this biopolymer has received limited attention for several decades right after its discovery, since the new millennium chitosan has emerged owing to its physicochemical, structural and biological properties, multifunctionalities and applications in several sectors. This review aims at providing an overview of chitosan properties, chemical functionalization, and the innovative biomaterials obtained thereof. Firstly, the chemical functionalization of chitosan backbone in the amino and hydroxyl groups will be addressed. Then, the review will focus on the bottom-up strategies to process a wide array of chitosan-based biomaterials. In particular, the preparation of chitosan-based hydrogels, organic–inorganic hybrids, layer-by-layer assemblies, (bio)inks and their use in the biomedical field will be covered aiming to elucidate and inspire the community to keep on exploring the unique features and properties imparted by chitosan to develop advanced biomedical devices. Given the wide body of literature that has appeared in past years, this review is far from being exhaustive. Selected works in the last 10 years will be considered.

Effect of Chitosan Coating for Efficient Encapsulation and Improved Stability under Loading Preparation and Storage Conditions of Bacillus Lipopeptides

This study aims to evaluate the effect of chitosan coating on the formation and properties of Bacillus cyclic lipopeptide (CLP)-loaded liposomes. A nanoencapsulation strategy for a chitosan-coated liposomal system using lecithin phospholipids for the entrapment of antibiotic CLP prepared from Bacillus subtilis KB21 was developed. The produced chitosan-coated CLP liposome had mean size in the range of 118.47-121.67 nm. Transmission electron microscopy showed the spherical-shaped vesicles. Fourier transform infrared spectroscopy findings indicated the successful coating of the produced CLP-loaded liposomes by the used chitosan. Liposomes coated with 0.2% and 0.5% chitosan concentration decreased the surface tension by 7.3-12.1%, respectively, and increased the CLP content by 15.1-27.0%, respectively, compared to the uncoating liposomes. The coated concentration of chitosan influenced their CLP loading encapsulation efficiency and release kinetics. The physicochemical results of the dynamic light scattering, CLP capture efficiency and long-term storage capacity of nanocapsules increased with chitosan coating concentration. Furthermore, the chitosan-coated liposomes exhibited a significant enhancement in the stability of CLP loading liposomes. These results may suggest the potential application of chitosan-coated liposomes as a carrier of antibiotics in the development of the functional platform.

Symmetry between Structure–Antibacterial Effect of Polymers Functionalized with Phosphonium Salts

In actual context, when the terms of biomass and bioenergy are extensively used, it becomes clear that the comparative study of some biopolymers, such as cellulose and chitosan, can offer a large usage range, based on the scientific progress obtained in the biomaterials field. Starting from the structural similarity of these two polymers, we synthesized composite materials by grafting on their surface biocide substances (phosphonium salts). After testing the biocidal effect, we can conclude that the antibacterial effect depends on the ratio of support to phosphonium salt, influenced by the interaction between the cationic component of the biocides and by the anionic component of the bacterial cellular membrane. It was also observed that for the materials obtained by cellulose functionalization with tri-n-butyl-hexadecyl phosphonium bromide, the bacterial effect on E. coli strain was much better when chitosan was used as the support material.

Enhancement of oil productivity of Mortierella alpine and investigation into the potential of Pickering oil-in-water emulsions to improve its oxidative stability

Mortierella alpine is an oleaginous fungi known for its tendency to produce oil and polyunsaturated fatty acid. Initial experiment indicated that magnesium oxide nanoparticles (MgONPs) accelerated glucose consumption and, consequently, oil production. After enhancement of Mortierella alpine CBS 754.68' oil production, the oxidative stability of the oil rich in long-chain polyunsaturated fatty acids (arachidonic acid) encapsulated by modified chitosan (CS) was assayed. To confirm the modification of CS, Fourier transform infrared spectroscopy (FTIR) spectrum indicated that the connection between CS and capric acid (CA) as well as stearic acid (SA) was well formed, leading to a considerable improvement in nanoparticle formation, measured by the SEM photographs, and physical and oxidative stability of emulsions. The oxidative stability of Mortierella alpine' oil emulsion in a period of 20 days at ambient temperature was monitored. Of all treated media, CS-SA nanoparticles were of the most oxidative stability. The rheological tests showed that viscosity behaviors were dominated by elastic behaviors in the impregnating emulsion with unmodified CS at the applied frequencies, and the elastic behavior of the emulsion sample prepared with CS-SA was slightly higher than that of the emulsion prepared with CS-CA. The results of redispersibility indicated that the powdered emulsion stabilized by CS-SA had the lowest water absorption.

PEG/Sodium Tripolyphosphate-Modified Chitosan/Activated Carbon Membrane for Rhodamine B Removal

Textile dyes from wastewater effluent are highly toxic to both living species and aqueous environments. An environmentally friendly method to remove hazardous dyes from wastewater in the textile industry has been a challenge. Chitosan (CS) and activated carbon (AC) are widely used as adsorbents for dye removal. However, the poor porosity and unsatisfactory stability of CS and the unfriendly cost of AC limited their applications to be used alone as a single adsorbent. Here, we report a novel method to prepare a CS/AC membrane using PEG10000 as a porogen and sodium tripolyphosphate (TPP) as a cross-linking agent. The adsorption efficiency and reusability of the PEG/TPP-modified CS/AC membrane to remove RhB were investigated based on dynamic and static adsorption models. The results reveal that the adsorption performance of CS/AC membranes was significantly improved after the PEG/TPP modification based on the abundance macroporous structure. The modified CS/AC membrane with a 30% AC doping ratio exhibited an excellent adsorption efficiency of 91.29 and 73.91% in the dynamic and static adsorption processes, respectively. These results provide new insights into designing membranes to remove dyes from wastewater efficiently.

Evaluation of chitosan aggregates as pickering emulsifier for the remediation of marine sediments

To restore the marine environments contaminated by oil spills to an acceptable state, sediments are commonly washed with seawater, and surfactants added into the aqueous solution to increase the oil recovery. However, the resulting mixture may release toxic break-down products, and the surfactants may themselves pose an environmental risk to marine species. In this work we investigated for the first time the addition of chitosan nanoparticles to the washing solution as an alternative and greener method to ensure the cleanup of contaminated sediments. Results showed 65.1 ± 6.4% of average removal from sand and seafloor sediments artificially contaminated at 4 wt % with crude oils displaying different specific gravity. These results were comparable to those obtained with commercial surfactant mixtures containing non-ionic and anionic surfactant (67.8 ± 5.2% removal). Moreover it was possible to recover the crude oil from the washing solution thanks to the reversible demulsification induced by the addition of CO₂.

Influence of Glycerophosphate Salt Solubility on the Gelation Mechanism of Colloidal Chitosan Systems

Recently, thermosensitive chitosan systems have attracted the interest of many researchers due to their growing application potential. Nevertheless, the mechanism of the sol-gel phase transition is still being discussed, and the glycerophosphate salt role is ambiguous. The aim of the work is to analyze the possibility of the exclusive use of a non-sodium glycerophosphate salt and to determine its impact on the gelation conditions determined by rheological and turbidimetric measurements as well as the stability of the systems by measuring changes in the Zeta potential value. It was found that ensuring the same proportions of glycerophosphate ions differing in cation to amino groups present in chitosan chains, leads to obtaining systems significantly different in viscoelastic properties and phase transition conditions. It was clearly shown that the systems with the calcium glycerophosphate, the insoluble form of which may constitute additional aggregation nuclei, undergo the gelation the fastest. The use of magnesium glycerophosphate salt delays the gelation due to the heat-induced dissolution of the salt. Thus, it was unequivocally demonstrated that the formulation of the gelation mechanism of thermosensitive chitosan systems based solely on the concentration of glycerophosphate without discussing its type is incorrect.

Field pea protein isolate/chitosan complex coacervates: Formation and characterization

Influence of chitosan (Ch) with low, medium, and high molecular weight (LMW, MMW, and HMW) on the formation of field pea protein isolate (FPPI)/Ch complex coacervates was investigated. An increase in maximum turbidity and a gradual shift of critical pH values towards the isoelectronic point of FPPI were observed as the FPPI/Ch ratio increased. Formation of FPPI/Ch complex coacervates was dominated by the electrostatic and hydrophobic interactions. FPPI/Ch complex coacervates exhibited a porous network microstructure and relatively uniform-sized and even-distributed pores were found in FPPI/Ch-HMW coacervates. Different thermodynamic profiles were observed during complex coacervation between FPPI and Ch with varying MWs and the largest binding stoichiometry was observed in the Ch-MMW at pH 6.6. In summary, the Ch-HMW was demonstrated to be most suitable for the formation of FPPI/Ch complex coacervates with homogenous microstructure but caused less changes in the tertiary conformation of FPPI compared to the Ch-LWM and Ch-MMW.

N-Halamine Hydantoin-Containing Chitosan: Synthesis, Characterization, Thermal and Photolytic Stability Studies

Current demand for new protective materials ensuring sterility is systematically growing. The purpose of this work was the synthesis of the biocidal N-halamine hydantoin-containing chitosan (CS-CMH-Cl) and characterization of its properties. The functionalization of the chitosan by 5-hydantoinacetic acid substitution leads to obtaining the CS-CMH polymer, which was chlorinated in next step to transform N-H into N-Cl bonds. In this study, the possibility of forming two biocidal N-Cl bonds in hydantoin ring, grafted onto chitosan chains, was proved. The structure and stability of the prepared material was confirmed by spectroscopic (FTIR, NMR, colorimetric test) and microscopic analyses (SEM, AFM). Surface properties were investigated based on contact-angle measurements. In addition, the thermal and photochemical stability of the obtained samples were determined as functional features, determining the range of potential use. It was found that both modified chitosan polymers (CS-CMH and CS-CMH-Cl) were characterized by the smaller thermal stability and more hydrophilic and rougher surface than unmodified CS. Photooxidative degradation of the obtained materials was observed mainly on the sample surface. After irradiation, the surfaces became more hydrophilic-especially in the case of the CS-CMH-Cl-which is advantageous from the point of view of the antibacterial properties. Antibacterial tests against S. aureus and E. coli confirmed the antibacterial activities of received CS-CMH-Cl material.

New Opportunity to Formulate Intranasal Vaccines and Drug Delivery Systems Based on Chitosan

In an attempt to develop drug delivery systems that bypass the blood–brain barrier (BBB) and prevent liver and intestinal degradation, it was concluded that nasal medication meets these criteria and can be used for drugs that have these drawbacks. The aim of this review is to present the influence of the properties of chitosan and its derivatives (mucoadhesion, permeability enhancement, surface tension, and zeta potential) on the development of suitable nasal drug delivery systems and on the nasal bioavailability of various active pharmaceutical ingredients. Interactions between chitosan and proteins, lipids, antigens, and other molecules lead to complexes that have their own applications or to changing characteristics of the substances involved in the bond (conformational changes, increased stability or solubility, etc.). Chitosan and its derivatives have their own actions (antibacterial, antifungal, immunostimulant, antioxidant, etc.) and can be used as such or in combination with other molecules from the same class to achieve a synergistic effect. The applicability of the properties is set out in the second part of the paper, where nasal formulations based on chitosan are described (vaccines, hydrogels, nanoparticles, nanostructured lipid carriers (NLC), powders, emulsions, etc.).

Enhanced Healing and Antimicrobial Efficacy of Chitosan-g-Polyacrylamide in a Rat Model of Gingival Ulcers

Patients in dental hospitals often experience oral ulcerative lesions, which lead to pain and affect the patient's quality of life. At present, the goal of treating oral ulcerative lesions with drugs is to reduce inflammation and promote ulcer healing. However, very few antibacterial and hemostatic drugs are designed to be suitable for the microenvironment of gingival ulcers. Based on this, we have designed a natural therapeutic agent for oral ulcerative lesions that meets the various requirements of oral ulcerative lesion medication. The chitosan-g-polyacrylamide (CP) copolymer is composed of chitosan as the main chain and polyacrylamide polymers as the side chains. Antibacterial experiments show that this polymer can effectively inhibit the proliferation of Gram-negative (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus). In vitro cell experiments also show that the CP copolymer is non-toxic, which is conducive to ulcer wound healing. Coagulation experiments prove that the CP copolymer can accelerate blood coagulation to stop bleeding. In experiments using a Wistar rat gingival ulcer model, the CP copolymer significantly promoted ulcer healing and shortened the healing time. These results indicate that the CP copolymer may serve as a potential therapeutic agent for oral ulcerative lesions.

Polysaccharides at fluid interfaces of food systems

Fabrication of next generation polysaccharides with interfacial properties is driven by the need to create high performance surfactants that operate at extreme environments, as for example in complex food formulations or in the gastrointestinal tract. The present review examines the behaviour of polysaccharides at fluid food interfaces focusing on their performance in the absence of any other intentionally added interfacially active components. Relevant theoretical principles of colloidal stabilisation using concepts that have been developed for synthetic polymers at interfaces are firstly introduced. The role of protein that in most cases is present in polysaccharide preparations either as contaminant or as integral part of the structure is also discussed. Critical assessment of the literature reveals that although protein may contribute to emulsion formation mostly as an anchor for polysaccharides to attach, it is not the determinant factor for the long-term emulsion stability, irrespectively of polysaccharide structure. Interfacial performance of key polysaccharides is also assessed revealing shared characteristics in their modes of adsorption. Conformation of polysaccharides, as affected by the composition of the aqueous solvent needs to be closely controlled, as it seems to be the underlying fundamental cause of stabilisation events and appears to be more important than the constituent polysaccharide sugar-monomers. Finally, polysaccharide adsorption is better understood by regarding them as copolymers, as this approach may assist to better control their properties with the aim to create the next generation biosurfactants.

Enhanced oral absorption of insulin using colon-specific nanoparticles co-modified with amphiphilic chitosan derivatives and cell-penetrating peptides

In this study, amphipathic chitosan derivative (ACS) and cell-penetrating peptide (CPP) co-modified colon-specific nanoparticles (CS-CPP NPs) were prepared and evaluated to improve the oral bioavailability of protein and peptide drugs. ACS modification was harnessed to protect CPPs from degradation in the stomach and small intestine after oral administration and achieve colon-specific drug delivery. After CS-CPP NPs reached the colon, ACSs on the surface of the NPs were gradually degraded and CPPs were exposed to bring into play the penetration efficacy in the colon epithelium. Herein, we synthesized four types of ACSs (TOCS, TDCS, TPCS and TSCS) and adopted three types of CPPs (Tat, Penetratin and R8) to prepare NPs (TOCS-Tat NPs, TDCS-Tat NPs, TPCS-Tat NPs, TSCS-Tat NPs, TDCS-Pen NPs and TDCS-R8 NPs). The study of the protective effects of ACS upon Tat showed that the modification of ACS exerted favourable protection upon Tat in the stomach and small intestine. ACS degradation in the colon was indirectly determined in the viscosity method, which indicated that ACS could be gradually degraded in the colon. Using Caco-2 cell monolayers as cell models, it was found that the cellular uptake amount and transcellular transportation performance of CS-CPP NPs were much enhanced compared with those of TDCS NPs and PVA NPs. With Bama mini-pigs as animal models, the pharmacodynamic study demonstrated that the hypoglycemic effect for insulin-loaded TDCS-Tat NPs was more significant than that for TDCS NPs, lowering the blood glucose by 40%. The pharmacokinetic study indicated that the AUC and Cmax for TDCS-Tat NPs were respectively increased by 1.45 times and 1.82 times compared with those of TDCS NPs. In conclusion, CS-CPP NPs as vehicles for colon-specific drug delivery systems may be an efficient approach to improve the oral absorption of protein and peptide drugs.

Chitosan as an emerging object for biological and biomedical applications

Natural polymers are being investigated with renewed exuberance as they have a tremendous unexploited potential. During the past few decades, much interest has developed in the biopolymer-based materials due to their biodegradable, nontoxic, biocompatible and non-allergic nature. Chitosan (CS) is the second most abundant naturally occurring amino polysaccharide after cellulose and is extracted from the shells of sea crustaceans. The primary amine group in CS is responsible for its various properties and it is derived from the deacetylated form of chitin. Its biocompatible, nontoxic, biodegradable and antimicrobial properties have led to significant research towards biomedical applications, such as tissue engineering, wound healing, drug delivery, obesity treatment, etc. This review summarizes the present work done by researchers in prospects of CS and its numerous applications in the biomedical field.

Acylated chitosan anchored paclitaxel loaded liposomes: Pharmacokinetic and biodistribution study in Ehrlich ascites tumor bearing mice

Acylated chitosan (Myristoyl and Octanoyl) coated paclitaxel-loaded liposomal formulation was developed with an aim to overcome the cremophor EL related toxicities. They were evaluated for drug entrapment, in vitro drug release, and cytotoxicity and cell uptake behavior using A549 cells. The ^99mTc radio-labeled formulations were also evaluated in vivo in Ehrlich Ascites Tumor (EAT) bearing mice for biodistribution and tumor uptake. The mean particle size of both coated and uncoated liposomal formulations was found to be in the range of 180-200 nm with high drug entrapment efficiency (>90% in case of uncoated liposomes and 80 ± 5% in case of coated liposomes). The uncoated liposomes displayed negative zeta potential (-10.5 ± 4.9 mV) whereas coated liposomes displayed positive zeta potential in the range of +21 to +27 mV. Slower drug release was observed in case of liposomes coated with acylated chitosans as compared to uncoated and native chitosan coated liposomes. All liposomal formulations were found less cytotoxic than paclitaxel injection (Celtax™, Celon Labs, India). In vitro cell uptake and intracellular distribution studies confirmed the cytosolic delivery of uncoated and coated liposomes. The myristoyl chitosan coated liposomal system (LMC) exhibited improved pharmacokinetic, biodistribution and tumor uptake characteristics over other formulations. These obtained results confirmed the potential application of acylated chitosn coated liposomal delivery systems (LMC) in tumor targeting of paclitaxel and other drugs.

Preparation of micrometric powders of parathyroid hormone (PTH1-34)-loaded chitosan oligosaccharide by supercritical fluid assisted atomization

Parathyroid hormone (PTH1-34)-loaded dry powders were fabricated from aqueous solution for pulmonary administration using supercritical fluid assisted atomization introduced by a hydrodynamic cavitation mixer (SAA-HCM). Herein, chitosan oligosaccharide (CSO) was selected as a carrier in an effort to enhance transmucosal absorption of the drug. Well-defined, separated and spherical PTH(1-34)/CSO composite microparticles were obtained, and the particles size could be well controlled with narrow distribution. Aerodynamic performance was determined using next generation impactor (NGI), and the mass median aerodynamic diameter (MMAD) ranged strictly 1-5 μm range with fine particle fraction (FPF) up to 63.51%. The structural integrity of coprecipitated PTH(1-34) was validated by HPLC, FT-IR and circular dichroism, and a high loading efficiency up to 92.8% was obtained. TGA analyses revealed its thermal stability was preserved and XRD patterns showed amorphous structure of particles. The SAA-HCM process is proposed as a green technique for preparation of inhalable protein/polymer composite dry powders without use of any organic solvents.

Preparation of an optimized ciprofloxacin-loaded chitosan nanomicelle with enhanced antibacterial activity

OBJECTIVE

The objective of this study was to evaluate the effect of lipid structure on physicochemical properties of chitosan-fatty acid nanomicelles and prepare an optimum ciprofloxacin-loaded formulation from these conjugates which could enhance the antibacterial effects of drug against some important pathogens like P. aeruginosa.

SIGNIFICANCE

Nowadays, resistance in infectious diseases is a growing worldwide concern. Nanocarriers can increase the therapeutic index and consequently reduce the antibiotic resistance. By site-specific delivery of drug, the adverse effects of broad-spectrum antibiotics such as ciprofloxacin would be reduced.

METHODS

Fatty acid grafted chitosan conjugates were synthetized in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The effects of fatty acid type (stearic acid, palmitic acid, and linoleic acid) on physicochemical properties of conjugates were investigated. Ciprofloxacin was encapsulated in nanomicelles by thin film hydration method. Also, the preparation process was optimized with a central composite design. The antibacterial effect of optimum formulation against P. aeruginosa, K. pneumoniae, and S. pneumoniae species was determined.

RESULTS

All conjugates were synthetized with high yield values and the substitution degrees ranged between 2.13 and 35.46%. Ciprofloxacin was successfully encapsulated in nanomicelles. The optimum formulation showed high drug loading (≈ 19%), with particle size of about 260 nm and a sustained release profile of ciprofloxacin. The minimum inhibitory concentrations of ciprofloxacin in optimum formulation against P. aeruginosa and K. pneumoniae species were 4 and 2 times lower in comparison with the free drug, respectively.

CONCLUSIONS

The antibacterial effect of ciprofloxacin was improved by encapsulation of drug in chitosan nanomicelles.

Immunoadjuvant potential of cross-linked dextran microspheres mixed with chitosan nanospheres encapsulated with tetanus toxoid

CONTEXT

Nasal mucosa is a desirable route for mucosal vaccine delivery. Mucosal co-administration of chitosan nanoparticles with absorption enhancers such as cross-linked dextran microspheres (CDM, Sephadex^®) is a promising antigen delivery system.

OBJECTIVE

In the current study, the chitosan nanospheres loaded with tetanus toxoid (CHT:TT NPs) was prepared and characterized. The immune responses against tetanus toxoid after nasal administration of CHT:TT NPs alone or mixed with CDM were also determined.

MATERIALS AND METHODS

Chitosan nanospheres were prepared by ionic gelation method. Particle size, releasing profile and antigen stability were evaluated by dynamic light scattering, diffusion chamber and SDS-PAGE methods, respectively. Rabbits were nasally immunized with different formulations loaded with 40 Lf TT. After three times immunizations with 2 weeks intervals, sera IgG titres and nasal lavage sIgA titres were determined.

RESULTS

Mean size of CHT NPs and CHT:TT NPs were 205 ± 42 nm and 432 ± 85 nm, respectively. The release profile showed that 42.4 ± 10.5% of TT was released after 30 min and reached to a steady state after 1.5 h. Stability of encapsulated TT in nanospheres was confirmed by SDS-PAGE. The antibody titres showed that CHT:TT NPs-induced antibody titres were higher than TT solution. CHT NPs mixed with CDM induced the systemic IgG and nasal lavage sIgA titres higher than intranasal administration of TT solution (p < 0.001).

DISCUSSION AND CONCLUSION

As the results indicated, these CHT:TT NPs when co-administered with CDM were able to induce more immune responses and have the potential to be used in mucosal immunization.