Thermal stability of bioactive enzymatic papers

Recent Advances In the development of enzymatic paper-based microfluidic biosensors

Using microfluidic paper-based analytical devices has attracted considerable attention in recent years. This is mainly due to their low cost, availability, portability, simple design, high selectivity, and sensitivity. Owing to their specific substrates and catalytic functions, enzymes are the most commonly used bioactive agents in μPADs. Enzymatic μPADs are various in design, fabrication, and detection methods. This paper provides a comprehensive review of the development of enzymatic μPADs by considering the methods of detection and fabrication. Particularly, techniques for mass production of these enzymatic μPADs for use in different fields such as medicine, environment, agriculture, and food industries are critically discussed. This paper aims to provide a critical review of μPADs and discuss different fabrication methods as the central parts of the μPADs production categorized into printable and non-printable methods. In addition, state-of-the-art technologies such as fully printed enzymatic μPADs for rapid, low-cost, and mass production and improvement have been considered.

Enhancing HIV-1 Neutralization by Increasing the Local Concentration of Membrane-Proximal External Region-Directed Broadly Neutralizing Antibodies

Broadly neutralizing antibodies (bNAbs) against the membrane-proximal external region (MPER) of the gp41 component of the human immunodeficiency virus type 1 (HIV-1) envelope (Env) are characterized by long, hydrophobic, heavy chain complementarity-determining region 3s (HCDR3s) that interact with the MPER and some viral membrane lipids to achieve increased local concentrations. Here, we show that increasing the local concentration of MPER-directed bNAbs at the cell surface via binding to the high-affinity Fc receptor FcγRI potentiates their ability to prevent viral entry in a manner analogous to the previously reported observation wherein the lipid-binding activity of MPER bNAbs increases their concentration at the viral surface membrane. However, binding of MPER-directed bNAb 10E8 to FcγRI abolishes the neutralization synergy that is seen with the N-heptad repeat (NHR)-targeting antibody D5_AR and NHR-targeting small molecule enfuvirtide (T20), possibly due to decreased accessibility of the NHR in the FcγRI-10E8-MPER complex. Taken together, our results suggest that lipid-binding activity and FcγRI-mediated potentiation function in concert to improve the potency of MPER-directed bNAbs by increasing their local concentration near the site of viral fusion. Therefore, lipid binding may not be a strict requirement for potent neutralization by MPER-targeting bNAbs, as alternative methods can achieve similar increases in local concentrations while avoiding potential liabilities associated with immunologic host tolerance. IMPORTANCE The trimeric glycoprotein Env, the only viral protein expressed on the surface of HIV-1, is the target of broadly neutralizing antibodies and the focus of most vaccine development efforts. Broadly neutralizing antibodies targeting the membrane proximal external region (MPER) of Env show lipid-binding characteristics, and modulating this interaction affects neutralization. In this study, we tested the neutralization potencies of variants of the MPER-targeting antibody 10E8 with different viral-membrane-binding and host FcγRI-binding capabilities. Our results suggest that binding to both lipid and FcγRI improves the neutralization potency of MPER-directed antibodies by concentrating the antibodies at sites of viral fusion. As such, lipid binding may not be uniquely required for MPER-targeting broadly neutralizing antibodies, as alternative methods to increase local concentration can achieve similar improvements in potency.

Developing Paper Based Diagnostic Technique to Detect Uric Acid in Urine

Urinary or serum uric acid concentration is an indicator of chronic kidney condition. An increase in uric acid concentration may indicate renal dysfunction. Reliable instantaneous detection of uric acid without requiring sophisticated laboratory and analytical instrumentation, such as: chromatographic and spectrophotometric methods, would be invaluable for patients with renal complication. This paper reports the early development of a simple, low-cost, instantaneous and user-friendly paper based diagnostic device (PAD) for the qualitative and quantitative detection of uric acid in urine. A colorimetric detection technique was developed based on the intensity of Prussian blue color formation on paper in presence of uric acid; the reaction rate of corresponding chemical reactions on paper surface was also studied. Based on the colorimetric signal produced on paper surface, a calibration curve was developed to detect unknown concentration of uric acid in urine. The effect of temperature on formation of color signal on paper surface was also analyzed. In this study, estimation of urinary uric acid using MATLAB coding on a windows platform was demonstrated as the use of software application and digital diagnostics. This paper-based technique is faster and less expensive compared to traditional detection techniques. The paper-based diagnostic can be integrated with a camera of smart phone, tablet computer or laptop and an image processing application (using windows/android/IOS platform) as a part of digital diagnostics. Therefore, with proper calibration, the paper-based technique can be compatible and economical to the sophisticated detection techniques used to detect urinary uric acid.

Functionality of Immunoglobulin G and Immunoglobulin M Antibody Physisorbed on Cellulosic Films

The functionality and aging mechanism of antibodies physisorbed onto cellulosic films was investigated. Blood grouping antibodies immunoglobulin G (IgG) and immunoglobulin M (IgM) were adsorbed onto smooth cellulose acetate (CAF) and regenerated cellulose (RCF) films. Cellulose films and adsorbed IgG layers were characterized at the air and liquid interface by X-ray and neutron reflectivity (NR), respectively. Cellulose film 208 Å thick (in air) swell to 386 Å once equilibrated in water. IgG adsorbs from solution onto cellulose as a partial layer 62 Å thick. IgG and IgM antibodies were adsorbed onto cellulose and cellulose acetate films, air dried, and aged at room temperature for periods up to 20 days. Antibody functionality and surface hydrophobicity were measured everyday with the size of red blood cell (RBC) agglutinates (using RBC specific to IgG/IgM) and the water droplet contact angle, respectively. The functionality of the aged IgG/IgM decreases faster if physisorbed on cellulose than on cellulose acetate and correlates to surface hydrophobicity. IgG physisorbed on RCF or CAF age better and remain functional longer than physisorbed IgM. We found a correlation between antibody stability and hydrogen bond formation ability of the system, evaluated from antibody carbonyl concentration and cellulosic surface hydroxyl concentration. Antibody physisorbs on cellulose by weak dipole forces and hydrogen bonds. Strong hydrogen bonding contributes to the physisorption of antibody on cellulose into a non-functional configuration in which the molecule relaxes by rotation of hydophobic groups toward the air interface.

The role of polyaminoamide-epichlorohydrin (PAE) on antibody longevity in bioactive paper

Paper has been used to engineer many types of bio-diagnostics. A major issue to most paper-based bio-diagnostics is the biomolecule instability causing the short shelf-life of the diagnostics. Commercial papers contain various polymeric additives. Polyamidoamine-epichlorohydrin (PAE), a polyelectrolyte typically used as wet-strength agent, is commonly used in filter papers and paper towels, which are often used as substrate in bioactive paper. However, the effect of cellulose or polymeric additives on antibody bioactivity is unknown. This limits paper optimization for diagnostic applications. In this study, model papers were made with and without PAE addition. IgM Anti-A blood typing antibody was physisorbed and dried on paper, aged for up to 9 weeks at different relative humidity (RH) conditions and the antibody activity was measured. The antibody bioactivity was represented as blood typing efficiency measured by image analysis. The surface chemical composition was measured using X-ray photoelectron spectroscopy (XPS). Antibody bioactivity loss was promoted by elevated RH, corresponding to increased paper water content. PAE significantly reduces the paper water content under ambient environment. Antibody bioactivity is higher on paper made with PAE under the high humidity conditions (57.6%-84.3% RH). However, under conditions of humidity saturation (100%RH), PAE shows little effect on reducing paper water content nor on protecting antibody bioactivity. These results demonstrate the water content of paper to be associated with antibody bioactivity loss.

Technical aspects and challenges of colorimetric detection with microfluidic paper-based analytical devices (μPADs) - A review

Paper-based devices are a leading alternative among the main analytical tools for point-of-care testing, due to their portability, low-cost, and ease-of-use. Colorimetric readouts are the most common method of detection in these microfluidic devices, enabling qualitative, semi-quantitative and fully quantitative analysis of multiple analytes. There is a multitude of ways to obtain a colorimetric output in such devices, including nanoparticles, dyes, redox and pH indicators, and each has unique drawbacks and benefits. There are also multiple variables that impact the analysis of colorimetric reactions in microfluidic paper-based systems, including color homogeneity, image capture methods, and the data handling itself. Here, we present a critical review of recent developments and challenges of colorimetric detection on microfluidic paper-based analytical devices (μPADs), and present thoughts and insights towards future perspectives in the area to improve the use of colorimetric readouts in conjunction with μPADs.

Smooth deuterated cellulose films for the visualisation of adsorbed bio-macromolecules

Novel thin and smooth deuterated cellulose films were synthesised to visualize adsorbed bio-macromolecules using contrast variation neutron reflectivity (NR) measurements. Incorporation of varying degrees of deuteration into cellulose was achieved by growing Gluconacetobacter xylinus in deuterated glycerol as carbon source dissolved in growth media containing D2O. The derivative of deuterated cellulose was prepared by trimethylsilylation(TMS) in ionic liquid(1-butyl-3-methylimidazolium chloride). The TMS derivative was dissolved in toluene for thin film preparation by spin-coating. The resulting film was regenerated into deuterated cellulose by exposure to acidic vapour. A common enzyme, horseradish peroxidase (HRP), was adsorbed from solution onto the deuterated cellulose films and visualized by NR. The scattering length density contrast of the deuterated cellulose enabled accurate visualization and quantification of the adsorbed HRP, which would have been impossible to achieve with non-deuterated cellulose. The procedure described enables preparing deuterated cellulose films that allows differentiation of cellulose and non-deuterated bio-macromolecules using NR.

Quantitative point-of-care (POC) assays using measurements of time as the readout: a new type of readout for mHealth

A paper-based microfluidic device was used to quantitatively detect active enzyme analytes in samples at mid to low femtomolar levels. The device uses a hydrophobic oligomer that controls the wetting properties of the paper within the device. When the target analyte is present within the sample, the oligomer depolymerizes, thus switching the paper to hydrophilic, allowing for the sample to wick through the device. Measuring the time for the sample to wick to a control region relative to an assay region within the device results in sensitive, quantitative measurements of the target enzyme (e.g., alkaline phosphatase or β-D-galactosidase). This device requires the use of only a timer for quantifying a target analyte, and thus the platform may be appropriate for use in resource-limited environments, where access to expensive diagnostic equipment is limited. A smartphone with integrated application software (the software has yet to be developed) could be used for timing the assay and for relating the time measurement to the quantitative readout for the assay. In future versions of this assay, it should be possible to configure the smartphone to start and stop the time-based measurement to further simplify the assay for the user.

Simple SERS substrates: powerful, portable, and full of potential

Surface enhanced Raman spectroscopy (SERS) is a powerful spectroscopic technique capable of detecting trace amounts of chemicals and identifying them based on their unique vibrational characteristics. While there are many complex methods for fabricating SERS substrates, there has been a recent shift towards the development of simple, low cost fabrication methods that can be performed in most labs or even in the field. The potential of SERS for widespread use will likely be realized only with development of cheaper, simpler methods. In this Perspective article we briefly review several of the more popular methods for SERS substrate fabrication, discuss the characteristics of simple SERS substrates, and examine several methods for producing simple SERS substrates. We highlight potential applications and future directions for simple SERS substrates, focusing on highly SERS active three-dimensional nanostructures fabricated by inkjet and screen printing and galvanic displacement for portable SERS analysis - an area that we believe has exciting potential for future research and commercialization.

A paper-based lateral flow assay for morphine

Morphine was used as a model analyte to examine the possibility of using cellulose, physically modified by papermaking and converting techniques, as a capillary matrix in a lateral flow type of diagnostic assay. This research was directed toward low-cost, disposable, and portable paper-based diagnostics, with the aim of addressing the analytical performance of paper as a substrate in the analysis for drugs of abuse. Antibody Fab fragments were used as sensing molecules, and gold nanoparticle detection was employed. Inkjet printing was used to pattern sensing biomolecules as detection zones on paper. To validate the usefulness of paper as a diagnostic platform, the principle of a direct sandwich assay, based on immunocomplex formation between morphine and the anti-morphine Fab fragment and detection of the formed immunocomplex by another Fab fragment, was implemented. Results were compared with that achieved by using nitrocellulose as a reference material. Possible interfering from the sample matrix on assay quality was investigated with spiked oral fluid samples. Under optimized conditions, a visually assessed limit of detection for the sandwich assay was 1 ng/mL, indicating that the paper-based test devices developed in this work can perform screening for drugs of abuse and can fulfill the requirement for a sensitive assay in diagnostically relevant ranges.

Portable bioactive paper-based sensor for quantification of pesticides

A paper-based biosensor was developed for the detection of the degradation products of organophosphorus pesticides. The biosensor quantifies acetylcholine esterase inhibitors in a fast, disposable, cheap, and accurate format. We specifically focused on the use of sugar or protein stabilizer to achieve a biosensor with long shelf-life. The new biosensor detected malathion with a detection limit of 2.5 ppm in 5 min incubation time. The operational stability was confirmed by testing 60 days storage at 4°C when glucose was used as stabilizer.

Paper surfaces functionalized by nanoparticles

Nanomaterials with unique electronic, optical and catalytic properties have recently been at the forefront of research due to their tremendous range of applications. Taking gold, silver and titania nanoparticles as examples, we have reviewed the current research works on paper functionalized by these nanoparticles. The functionalization of paper with only a very small concentration of nanoparticles is able to produce devices with excellent photocatalytic, antibacterial, anti-counterfeiting, Surface Enhanced Raman Scattering (SERS) and Surface Plasmon Resonance (SPR) performances. This review presents a brief overview of the properties of gold, silver and titania nanoparticles which contribute to the major applications of nanoparticles-functionalized paper. Different preparation methods of the nanoparticles-functionalized paper are reviewed, focusing on their ability to control the morphology and structure of paper as well as the spatial location and adsorption state of nanoparticles which are critical in achieving their optimum applications. In addition, main applications of the nanoparticles-functionalized papers are highlighted and their critical challenges are discussed, followed by perspectives on the future direction in this research field. Whilst a few studies to date have characterized the distribution of nanoparticles on paper substrates, none have yet optimized paper as a nanoparticles' substrate. There remains a strong need to improve understanding on the optimum adsorption state of nanoparticles on paper and the heterogeneity effects of paper on the properties of these nanoparticles.

Green Plate Making Technology Based on Nano-Materials

Laser phototypesetting and computer to plate (CTP) technologies are widely used in print industry. These technologies are based on the complex photosensitive image process. The exposing and development processes result in waste of photosensitive materials and environment pollution. Green plate making technology is not based on photosensitive materials but nano-materials. The image process of the technology is to jet the nano-composite transfer printing material on super hydrophilic print plate with special nano and micro-structure. Then the oleophilic image area and hydrophilic non image area are formed by adjusting interface characters between the nano-composite transfer printing material and super hydrophilic print plate. The plate is used for printing without exposing and development. Without photosensitive image process, the technology has many advantages such as no operation in darkroom, simple process, environmental friendly and low cost. The key problems of print resolution and press life have been solved effectively by preparation of nano composite transfer printing material and super hydrophilic print plate. In this paper, the research process of the nano composite material and the print plate are presented.