Bacillus anthracis and Bacillus subtilis spore surface properties and transport

Transport and removal of spores of Bacillus subtilis in an alluvial gravel aquifer at varying flow rates and implications for setback distances

To guarantee proper protection from fecally transmitted pathogen infections, drinking water wells should have a sufficiently large setback distance from potential sources of contamination, e.g. a nearby river. The aim of this study was to provide insight in regards to microbial contamination of groundwater under different flow velocities, which can vary over time due to changes in river stage, season or pumping rate. The effects of these changes, and how they affect removal parameters, are not completely understood. In this study, field tracer tests were carried out in a sandy gravel aquifer near Vienna, Austria to evaluate the ability of subsurface media to attenuate Bacillus subtilis spores, used as a surrogate for Cryptosporidium and Campylobacter. The hydraulic gradient between injection and extraction was controlled by changing the pumping rate (1, 10 l/s) of a pumping well at the test site, building upon previously published work in which tracer tests with a 5 l/s pumping rate were carried out. Attachment and detachment rate coefficients were determined using a HYDRUS-3D model and ranged from 0.12 to 0.76 and 0-0.0013 h^-1, respectively. Setback distances were calculated based on the 60-day travel time, as well as a quantitative microbial risk assessment (QMRA) approach, which showed similar results at this site; around 700 m at the highest pumping rate. Removal rates (λ) in the field tests ranged from 0.2 to 0.3 log/m, with lower pumping rates leading to higher removal. It was shown that scale must be taken into consideration when determining λ for the calculation of safe setback distances.

Role of novel polysaccharide layers in assembly of the exosporium, the outermost protein layer of the Bacillus anthracis spore

A fundamental question in cell biology is how cells assemble their outer layers. The bacterial endospore is a well-established model for cell layer assembly. However, the assembly of the exosporium, a complex protein shell comprising the outermost layer in the pathogen Bacillus anthracis, remains poorly understood. Exosporium assembly begins with the deposition of proteins at one side of the spore surface, followed by the progressive encirclement of the spore. We seek to resolve a major open question: the mechanism directing exosporium assembly to the spore, and then into a closed shell. We hypothesized that material directly underneath the exosporium (the interspace) directs exosporium assembly to the spore and drives encirclement. In support of this, we show that the interspace possesses at least two distinct layers of polysaccharide. Secondly, we show that putative polysaccharide biosynthetic genes are required for exosporium encirclement, suggesting a direct role for the interspace. These results not only significantly clarify the mechanism of assembly of the exosporium, an especially widespread bacterial outer layer, but also suggest a novel mechanism in which polysaccharide layers drive the assembly of a protein shell.

Participatory mapping identifies risk areas and environmental predictors of endemic anthrax in rural Africa

Disease mapping reveals geographical variability in incidence, which can help to prioritise control efforts. However, in areas where this is most needed, resources to generate the required data are often lacking. Participatory mapping, which makes use of indigenous knowledge, is a potential approach to identify risk areas for endemic diseases in low- and middle-income countries. Here we combine this method with Geographical Information System-based analyses of environmental variables as a novel approach to study endemic anthrax, caused by the spore-forming bacterium Bacillus anthracis, in rural Africa. Our aims were to: (1) identify high-risk anthrax areas using community knowledge; (2) enhance our understanding of the environmental characteristics associated with these areas; and (3) make spatial predictions of anthrax risk. Community members from the Ngorongoro Conservation Area (NCA), northern Tanzania, where anthrax is highly prevalent in both animals and humans, were asked to draw areas they perceived to pose anthrax risks to their livestock on geo-referenced maps. After digitisation, random points were generated within and outside the defined areas to represent high- and low-risk areas, respectively. Regression analyses were used to identify environmental variables that may predict anthrax risk. Results were combined to predict how the probability of being a high-risk area for anthrax varies across space. Participatory mapping identified fourteen discrete high-risk areas ranging from 0.2 to 212.9 km² in size and occupying 8.4% of the NCA. Areas that pose a high risk of anthrax were positively associated with factors that increase contact with Bacillus anthracis spores rather than those associated with the pathogen's survival: close proximity to inland water bodies, where wildlife and livestock congregate, and low organic carbon content, which may indicate an increased likelihood of animals grazing close to soil surface and ingesting spores. Predicted high-risk areas were located in the centre of the NCA, which is likely to be encountered by most herds during movements in search for resources. We demonstrate that participatory mapping combined with spatial analyses can provide novel insights into the geography of disease risk. This approach can be used to prioritise areas for control in low-resource settings, especially for diseases with environmental transmission.

Laccase and Its Mutant Displayed on the Bacillus subtilis Spore Coat for Oxidation of Phenolic Compounds in Organic Solvents

Enzymes displayed on the Bacillus subtilis spore coat have several features that are useful for biocatalysis. The enzyme is preimmobilized on an inert surface of the spore coat, which is due to the natural sporulation process. As a result, protein stability can be increased, and they are resistant to environmental changes. Next, they would not lyse under extreme conditions, such as in organic solvents. Furthermore, they can be easily removed from the reaction solution and reused. The laboratory evolved CotA laccase variant T480A-CotA was used to oxidize the following phenolic substrates: (+)-catechin, (−)-epicatechin, and sinapic acid. The kinetic parameters were determined and T480A-CotA had a greater Vmax/Km than wt-CotA for all substrates. The Vmax/Km for T480A-CotA was 4.1, 5.6, and 1.4-fold greater than wt-CotA for (+)-catechin, (−)-epicatechin, and sinapic acid, respectively. The activity of wt-CotA and T480A-CotA was measured at different concentrations from 0–70% in organic solvents (dimethyl sulfoxide, ethanol, methanol, and acetonitrile). The Vmax for T480A-CotA was observed to be greater than the wt-CotA in all organic solvents. Finally, the T480A-CotA was recycled 7 times over a 23-h period and up to 60% activity for (+)-catechin remained. The product yield was up to 3.1-fold greater than the wild-type.

Convergent evolution of diverse Bacillus anthracis outbreak strains toward altered surface oligosaccharides that modulate anthrax pathogenesis

Bacillus anthracis, a spore-forming gram-positive bacterium, causes anthrax. The external surface of the exosporium is coated with glycosylated proteins. The sugar additions are capped with the unique monosaccharide anthrose. The West African Group (WAG) B. anthracis have mutations rendering them anthrose deficient. Through genome sequencing, we identified 2 different large chromosomal deletions within the anthrose biosynthetic operon of B. anthracis strains from Chile and Poland. In silico analysis identified an anthrose-deficient strain in the anthrax outbreak among European heroin users. Anthrose-deficient strains are no longer restricted to West Africa so the role of anthrose in physiology and pathogenesis was investigated in B. anthracis Sterne. Loss of anthrose delayed spore germination and enhanced sporulation. Spores without anthrose were phagocytized at higher rates than spores with anthrose, indicating that anthrose may serve an antiphagocytic function on the spore surface. The anthrose mutant had half the LD50 and decreased time to death (TTD) of wild type and complement B. anthracis Sterne in the A/J mouse model. Following infection, anthrose mutant bacteria were more abundant in the spleen, indicating enhanced dissemination of Sterne anthrose mutant. At low sample sizes in the A/J mouse model, the mortality of ΔantC-infected mice challenged by intranasal or subcutaneous routes was 20% greater than wild type. Competitive index (CI) studies indicated that spores without anthrose disseminated to organs more extensively than a complemented mutant. Death process modeling using mouse mortality dynamics suggested that larger sample sizes would lead to significantly higher deaths in anthrose-negative infected animals. The model was tested by infecting Galleria mellonella with spores and confirmed the anthrose mutant was significantly more lethal. Vaccination studies in the A/J mouse model showed that the human vaccine protected against high-dose challenges of the nonencapsulated Sterne-based anthrose mutant. This work begins to identify the physiologic and pathogenic consequences of convergent anthrose mutations in B. anthracis.

Laboratory results and mathematical modeling of spore surface interactions in stormwater runoff

Development of numerical models to predict stormwater-mediated transport of pathogenic spores in the environment depends on an understanding of adhesion forces that dictate detachment after rain events. Zeta potential values were measured in the laboratory for Bacillus globigii and Bacillus thuringiensis kurstaki, two common surrogates used to represent Bacillus anthracis, in synthetic baseline ultrapure water and laboratory prepared stormwater. Zeta potential curves were also determined for materials representative of urban infrastructure (concrete and asphalt). These data were used to predict the interaction energy between the spores and urban materials using Derjaguin-Landau-Verwey-Overbeek (DLVO) modeling. B. globigii and B. thuringiensis kurstaki sourced from Yakibou Inc., were found to have similar zeta potential curves, whereas spores sourced from the U.S. military's Dugway laboratory were found to diverge. In the ultrapure water, the modeling results use the laboratory data to demonstrate that the energy barriers between the spores and the urban materials were tunable through compression of the electrical double layer of the spores via changes of ionic strength and pH of the water. In the runoff water, charge neutralization dominated surface processes. The cations, metals, and natural organic matter (NOM) in the runoff water contributed to equalizing the zeta potential values for Dugway B. globigii and B. thuringiensis kurstaki, and drastically modified the surface of the concrete and asphalt. All DLVO energy curves using the runoff water were repulsive. The highest energy barrier predicted in this study was for Dugway B. globigii spores interacting with a concrete surface in runoff water, suggesting that this would be the most challenging combination to detach through water-based decontamination.

Contributions of crust proteins to spore surface properties in Bacillus subtilis

Surface properties, such as adhesion and hydrophobicity, constrain dispersal of bacterial spores in the environment. In Bacillus subtilis, these properties are influenced by the outermost layer of the spore, the crust. Previous work has shown that two clusters, cotVWXYZ and cgeAB, encode the protein components of the crust. Here, we characterize the respective roles of these genes in surface properties using Bacterial Adherence to Hydrocarbons assays, negative staining of polysaccharides by India ink and Transmission Electron Microscopy. We showed that inactivation of crust genes caused increases in spore relative hydrophobicity, disrupted the spore polysaccharide layer, and impaired crust structure and attachment to the rest of the coat. We also found that cotO, previously identified for its role in outer coat formation, is necessary for proper encasement of the spore by the crust. In parallel, we conducted fluorescence microscopy experiments to determine the full network of genetic dependencies for subcellular localization of crust proteins. We determined that CotZ is required for the localization of most crust proteins, while CgeA is at the bottom of the genetic interaction hierarchy.

Colony-Forming Unit Spreadplate Assay versus Liquid Culture Enrichment-Polymerase Chain Reaction Assay for the Detection of Bacillus Endospores in Soils

A liquid culture enrichment-polymerase chain reaction (E-PCR) assay was investigated as a potential tool to overcome inhibition by chemical component, debris, and background biological impurities in soil that were affecting detection assay performance for soil samples containing Bacillus atrophaeus subsp. globigii (a surrogate for B. anthracis). To evaluate this assay, 9 g of matched sets of three different soil types (loamy sand [sand], sandy loam [loam] and clay) was spiked with 0, ~4.5, 45, 225, 675 and 1350 endospores. One matched set was evaluated using a previously published endospore concentration and colony-forming unit spreadplate (CFU-S) assay and the other matched set was evaluated using an E-PCR assay to investigate differences in limits of detection between the two assays. Data illustrated that detection using the CFU-S assay at the 45-endospore spike level started to become sporadic whereas the E-PCR assay produced repeatable detection at the ~4.5-endospore spike concentration. The E-PCR produced an ~2-log increase in sensitivity and required slightly less time to complete than the CFU-S assay. This study also investigated differences in recovery among pure and blended sand and clay soils and found potential activation of B. anthracis in predominately clay-based soils.

Coordinated Assembly of the Bacillus anthracis Coat and Exosporium during Bacterial Spore Outer Layer Formation

This work dramatically improves our understanding of the assembly of the outermost layer of the B. anthracis spore, the exosporium, a layer that encases spores from many bacterial species and likely plays important roles in the spore’s interactions with the environment, including host tissues. Nonetheless, the mechanisms directing exosporium assembly into a shell surrounding the spore are still very poorly understood. In this study, we clarify these mechanisms by the identification of a novel protein interaction network that directs assembly to initiate at a specific subcellular location in the developing cell. Our results further suggest that the presence or absence of an exosporium has a major impact on the assembly of other more interior spore layers, thereby potentially explaining long-noted differences in spore assembly between B. anthracis and the model organism B. subtilis.

Bacterial spores produced by the Bacillales are composed of concentric shells, each of which contributes to spore function. Spores from all species possess a cortex and coat, but spores from many species possess additional outer layers. The outermost layer of Bacillus anthracis spores, the exosporium, is separated from the coat by a gap known as the interspace. Exosporium and interspace assembly remains largely mysterious. As a result, we have a poor understanding of the overarching mechanisms driving the assembly of one of the most ubiquitous cell types in nature. To elucidate the mechanisms directing exosporium assembly, we generated strains bearing mutations in candidate exosporium-controlling genes and analyzed the effect on exosporium formation. Biochemical and cell biological analyses argue that CotE directs the assembly of CotO into the spore and that CotO might be located at or close to the interior side of the cap. Taken together with data showing that CotE and CotO interact directly in vitro, we propose a model in which CotE and CotO are important components of a protein interaction network that connects the exosporium to the forespore during cap formation and exosporium elongation. Our data also suggest that the cap interferes with coat assembly at one pole of the spore, altering the pattern of coat deposition compared to the model organism Bacillus subtilis. We propose that the difference in coat assembly patterns between these two species is due to an inherent flexibility in coat assembly, which may facilitate the evolution of spore outer layer complexity.

Effect of cultivation pH on the surface hydrophobicity of Bacillus subtilis spores

Bacillus subtilis spores are often used as biological indicators (BI) to monitor decontamination processes with gaseous hydrogen peroxide. Results in practical inactivation validation tests, however, vary considerably with no available explanation so far. This study reports on the effect of cultivation pH on spore surface hydrophobicity. Surface hydrophobicity is suspected to have an impact on the decontamination of technical surfaces such as packaging material when gaseous, condensing hydrogen peroxide is applied. It is the aim of this study to examine the impact of different cultivation pH levels on surface hydrophobicity and resistance of B. subtilis spores. Submersed cultivation of B. subtilis in bioreactors at controlled conditions with different static pH levels led to contact angles ranged between 50° and 80°, which was analyzed with water on a homogeneous layer of spores on a filter sheet. Resistance of spores was also affected by the cultivation pH. The results show that the culturing conditions during BI production should be controlled to obtain BI with specified characteristics in inactivation validation tests.

The Spore Coat

Spores of Clostridiales and Bacillales are encased in a complex series of concentric shells that provide protection, facilitate germination, and mediate interactions with the environment. Analysis of diverse spore-forming species by thin-section transmission electron microscopy reveals that the number and morphology of these encasing shells vary greatly. In some species, they appear to be composed of a small number of discrete layers. In other species, they can comprise multiple, morphologically complex layers. In addition, spore surfaces can possess elaborate appendages. For all their variability, there is a consistent architecture to the layers encasing the spore. A hallmark of all Clostridiales and Bacillales spores is the cortex, a layer made of peptidoglycan. In close association with the cortex, all species examined possess, at a minimum, a series of proteinaceous layers, called the coat. In some species, including Bacillus subtilis, only the coat is present. In other species, including Bacillus anthracis, an additional layer, called the exosporium, surrounds the coat. Our goals here are to review the present understanding of the structure, composition, assembly, and functions of the coat, primarily in the model organism B. subtilis, but also in the small but growing number of other spore-forming species where new data are showing that there is much to be learned beyond the relatively well-developed basis of knowledge in B. subtilis. To help summarize this large field and define future directions for research, we will focus on key findings in recent years.

Surviving Between Hosts: Sporulation and Transmission

To survive adverse conditions, some bacterial species are capable of developing into a cell type, the "spore," which exhibits minimal metabolic activity and remains viable in the presence of multiple environmental challenges. For some pathogenic bacteria, this developmental state serves as a means of survival during transmission from one host to another. Spores are the highly infectious form of these bacteria. Upon entrance into a host, specific signals facilitate germination into metabolically active replicating organisms, resulting in disease pathogenesis. In this article, we will review spore structure and function in well-studied pathogens of two genera, Bacillus and Clostridium, focusing on Bacillus anthracis and Clostridium difficile, and explore current data regarding the lifestyles of these bacteria outside the host and transmission from one host to another.

Considerations for estimating microbial environmental data concentrations collected from a field setting

In the event of an indoor release of an environmentally persistent microbial pathogen such as Bacillus anthracis, the potential for human exposure will be considered when remedial decisions are made. Microbial site characterization and clearance sampling data collected in the field might be used to estimate exposure. However, there are many challenges associated with estimating environmental concentrations of B. anthracis or other spore-forming organisms after such an event before being able to estimate exposure. These challenges include: (1) collecting environmental field samples that are adequate for the intended purpose, (2) conducting laboratory analyses and selecting the reporting format needed for the laboratory data, and (3) analyzing and interpreting the data using appropriate statistical techniques. This paper summarizes some key challenges faced in collecting, analyzing, and interpreting microbial field data from a contaminated site. Although the paper was written with considerations for B. anthracis contamination, it may also be applicable to other bacterial agents. It explores the implications and limitations of using field data for determining environmental concentrations both before and after decontamination. Several findings were of interest. First, to date, the only validated surface/sampling device combinations are swabs and sponge-sticks on stainless steel surfaces, thus limiting availability of quantitative analytical results which could be used for statistical analysis. Second, agreement needs to be reached with the analytical laboratory on the definition of the countable range and on reporting of data below the limit of quantitation. Finally, the distribution of the microbial field data and statistical methods needed for a particular data set could vary depending on these data that were collected, and guidance is needed on appropriate statistical software for handling microbial data. Further, research is needed to develop better methods to estimate human exposure from pathogens using environmental data collected from a field setting.

Effect of moisture equilibration time and medium on contact angles of bacterial spores

Contact angle measurement of microorganisms is often described in literature, either to investigate their hydrophobic characteristic or the adhesion behavior of cells. However, in some key aspects the preparation methods differ. Thus, it is difficult to compare results and to choose a procedure for repetition of measurements. The aim of this paper is to point out some critical points during microorganism film preparation that can alter the resulting contact angles. Depending on the moisturizing medium and equilibration time, contact angles differ significantly.

Aerosol and Surface Deposition Characteristics of Two Surrogates for Bacillus anthracis Spores

Spores of an acrystalliferous derivative of Bacillus thuringiensis subsp. kurstaki, termed Btcry-, are morphologically, aerodynamically, and structurally indistinguishable from Bacillus anthracis spores. Btcry- spores were dispersed in a large, open-ended barn together with spores of Bacillus atrophaeus subsp. globigii, a historically used surrogate for Bacillus anthracis Spore suspensions (2 × 10¹² CFU each of B. atrophaeus subsp. globigii and Btcry-) were aerosolized in each of five spray events using a backpack misting device incorporating an air blower; a wind of 4.9 to 7.6 m s^-1 was also flowing through the barn in the same direction. Filter air samplers were situated throughout the barn to assess the aerosol density of the spores during each release. Trays filled with a surfactant in aqueous buffer were placed on the floor near the filter samplers to assess spore deposition. Spores were also recovered from arrays of solid surfaces (concrete, aluminum, and plywood) that had been laid on the floor and set up as a wall at the end of the barn. B. atrophaeus subsp. globigii spores were found to remain airborne for significantly longer periods, and to be deposited on horizontal surfaces at lower densities, than Btcry- spores, particularly near the spray source. There was a 6-fold-higher deposition of Btcry- spores than of B. atrophaeus subsp. globigii spores on vertical surfaces relative to the surrounding airborne density. This work is relevant for selecting the best B. anthracis surrogate for the prediction of human exposure, hazard assessment, and hazard management following a malicious release of B. anthracis IMPORTANCE: There is concern that pathogenic bacteria could be maliciously disseminated in the air to cause human infection and disruption of normal life. The threat from spore-forming organisms, such as the causative agent of anthrax, is particularly serious. In order to assess the extent of this risk, it is important to have a surrogate organism that can be used to replicate the dispersal characteristics of the threat agent accurately. This work compares the aerosol dispersal and deposition behaviors of the surrogates Btcry- and B. atrophaeus subsp. globigii Btcry- spores remained in the air for a shorter time, and were markedly more likely to adhere to vertical surfaces, than B. atrophaeus subsp. globigii spores.

The Bacillus anthracis Exosporium: What's the Big "Hairy" Deal?

In some Bacillus species, including Bacillus subtilis, the coat is the outermost layer of the spore. In others, such as the Bacillus cereus family, there is an additional layer that envelops the coat, called the exosporium. In the case of Bacillus anthracis, a series of fine hair-like projections, also referred to as a "hairy" nap, extends from the exosporium basal layer. The exact role of the exosporium in B. anthracis, or for any of the Bacillus species possessing this structure, remains unclear. However, it has been assumed that the exosporium would play some role in infection for B. anthracis, because it is the outermost structure of the spore and would make initial contact with host and immune cells during infection. Therefore, the exosporium has been a topic of great interest, and over the past decade much progress has been made to understand its composition, biosynthesis, and potential roles. Several key aspects of this spore structure, however, are still debated and remain undetermined. Although insights have been gained on the interaction of exosporium with the host during infection, the exact role and significance of this complex structure remain to be determined. Furthermore, because the exosporium is a highly antigenic structure, future strategies for the next-generation anthrax vaccine should pursue its inclusion as a component to provide protection against the spore itself during the initial stages of anthrax.

The Exosporium Layer of Bacterial Spores: a Connection to the Environment and the Infected Host

Much of what we know regarding bacterial spore structure and function has been learned from studies of the genetically well-characterized bacterium Bacillus subtilis. Molecular aspects of spore structure, assembly, and function are well defined. However, certain bacteria produce spores with an outer spore layer, the exosporium, which is not present on B. subtilis spores. Our understanding of the composition and biological functions of the exosporium layer is much more limited than that of other aspects of the spore. Because the bacterial spore surface is important for the spore's interactions with the environment, as well as being the site of interaction of the spore with the host's innate immune system in the case of spore-forming bacterial pathogens, the exosporium is worthy of continued investigation. Recent exosporium studies have focused largely on members of the Bacillus cereus family, principally Bacillus anthracis and Bacillus cereus. Our understanding of the composition of the exosporium, the pathway of its assembly, and its role in spore biology is now coming into sharper focus. This review expands on a 2007 review of spore surface layers which provided an excellent conceptual framework of exosporium structure and function (A. O. Henriques and C. P. Moran, Jr., Annu Rev Microbiol 61:555-588, 2007, http://dx.doi.org/10.1146/annurev.micro.61.080706.093224). That review began a process of considering outer spore layers as an integrated, multilayered structure rather than simply regarding the outer spore components as independent parts.

Use of aerobic spores as a surrogate for cryptosporidium oocysts in drinking water supplies

Waterborne illnesses are a growing concern among health and regulatory agencies worldwide. The United States Environmental Protection Agency has established several rules to combat the contamination of water supplies by cryptosporidium oocysts, however, the detection and study of cryptosporidium oocysts is hampered by methodological and financial constraints. As a result, numerous surrogates for cryptosporidium oocysts have been proposed by the scientific community and efforts are underway to evaluate many of the proposed surrogates. The purpose of this review is to evaluate the suitability of aerobic bacterial spores to serve as a surrogate for cryptosporidium oocysts in identifying contaminated drinking waters. To accomplish this we present a comparison of the biology and life cycles of aerobic spores and oocysts and compare their physical properties. An analysis of their surface properties is presented along with a review of the literature in regards to the transport, survival, and prevalence of aerobic spores and oocysts in the saturated subsurface environment. Aerobic spores and oocysts share many commonalities with regard to biology and survivability, and the environmental prevalence and ease of detection make aerobic spores a promising surrogate for cryptosporidium oocysts in surface and groundwater. However, the long-term transport and release of aerobic spores still needs to be further studied, and compared with available oocyst information. In addition, the surface properties and environmental interactions of spores are known to be highly dependent on the spore taxa and purification procedures, and additional research is needed to address these issues in the context of transport.

Glycosylation of BclA Glycoprotein from Bacillus cereus and Bacillus anthracis Exosporium Is Domain-specific

The spores of the Bacillus cereus group (B. cereus, Bacillus anthracis, and Bacillus thuringiensis) are surrounded by a paracrystalline flexible yet resistant layer called exosporium that plays a major role in spore adhesion and virulence. The major constituent of its hairlike surface, the trimerized glycoprotein BclA, is attached to the basal layer through an N-terminal domain. It is then followed by a repetitive collagen-like neck bearing a globular head (C-terminal domain) that promotes glycoprotein trimerization. The collagen-like region of B. anthracis is known to be densely substituted by unusual O-glycans that may be used for developing species-specific diagnostics of B. anthracis spores and thus targeted therapeutic interventions. In the present study, we have explored the species and domain specificity of BclA glycosylation within the B. cereus group. First, we have established that the collagen-like regions of both B. anthracis and B. cereus are similarly substituted by short O-glycans that bear the species-specific deoxyhexose residues anthrose and the newly observed cereose, respectively. Second we have discovered that the C-terminal globular domains of BclA from both species are substituted by polysaccharide-like O-linked glycans whose structures are also species-specific. The presence of large carbohydrate polymers covering the surface of Bacillus spores may have a profound impact on the way that spores regulate their interactions with biotic and abiotic surfaces and represents potential new diagnostic targets.

Impeding Bacillus spore germination in vitro and in milk by soy glycinin during long cold storage

This paper presents a study of the magnitude and mechanism of impeding the emergent spore germination of Bacillus subtilis (non-hemolytic strain) and Bacillus licheniformis (hemolytic strain) under the action of soybean glycinin and its basic subunit (BS). Incubating B. licheniformis spores with 100 μg/ml of glycinin or BS at 35°C for 24 h totally prevented the hemolytic activity associated with the emergent vegetative cells on blood agar during 3-5 days of incubation at 35°C in contrast to the control. Glycinin and BS (100 μg/ml) also resulted in the leakage of 70 and 73% of the initially germinating spore contents of A260 absorbing materials of the two bacterial species after 2 h of incubation at 35°C, respectively. Increasing the concentration of glycinin and BS up to 400 μg/ml increased the germinating spore leakage to 83 and 88%, respectively. Spore germination in Muller Hinton Broth containing glycinin and BS (100 μg/ml) was practically nil after 4 days of incubation at 35°C. Supplementing milk preheated at 80°C/5 min with both glycinin and BS kept the final vegetative cell counts down to about 30 and 20% of the corresponding control, respectively, after 50 days of storage at 4°C. Both light, and transmission electron, microscopy images revealed significant morphological and structural distorting changes in BS-treated spores of B. licheniformis.

Spore Surface Display

A variety of bioactive peptides and proteins have been successfully displayed on the surface of recombinant spores of Bacillus subtilis and other sporeformers. In most cases, spore display has been achieved by stably anchoring the foreign molecules to endogenous surface proteins or parts of them. Recombinant spores have been proposed for a large number of potential applications ranging from oral vaccine vehicles to bioremediation tools, and including biocatalysts, probiotics for animal or human use, as well as the generation and screening of mutagenesis libraries. In addition, a nonrecombinant approach has been recently developed to adsorb antigens and enzymes on the spore surface. This nonrecombinant approach appears particularly well suited for applications involving the delivery of active molecules to human or animal mucosal surfaces. Both the recombinant and nonrecombinant spore display systems have a number of advantages over cell- or phage-based systems. The stability, safety of spores of several bacterial species, and amenability to laboratory manipulations, together with the lack of some constraints limiting the use of other systems, make the spore a highly efficient platform to display heterologous proteins.

Molecular modeling toward selective inhibitors of dihydrofolate reductase from the biological warfare agent Bacillus anthracis

In the present work, we applied docking and molecular dynamics techniques to study 11 compounds inside the enzymes dihydrofolate reductase (DHFR) from the biological warfare agent Bacillus anthracis (BaDHFR) and Homo sapiens sapiens (HssDHFR). Six of these compounds were selected for a study with the mutant BaF96IDHFR. Our results corroborated with experimental data and allowed the proposition of a new molecule with potential activity and better selectivity for BaDHFR.

Endospore surface properties of commonly used Bacillus anthracis surrogates vary in aqueous solution

The hydrophobic character and electrophoretic mobility (EPM) of microorganisms are vital aspects of understanding their interactions with the environment. These properties are fundamental in fate-and-transport, physiological, and virulence studies, and thus integral in surrogate selection. Hydrophobic and electrostatic forces are significant contributors to particle and microorganism mobility in the environment. Herein, the surface properties of commonly used Bacillus anthracis surrogate endospores were tested under comparable conditions with respect to culture, endospore purification, buffer type and strength. Additionally, data is presented of endospores suspended in dechlorinated tap water to evaluate the surrogates in regard to a breach of water infrastructure security. The surface properties of B. anthracis were found to be the most hydrophobic and least electronegative among the six Bacillus species tested across buffer strength. The effect of EPM on hydrophobicity varies in a species-specific manner. This study demonstrates that surrogate surface properties differ and care must be taken when choosing the most suitable surrogate. Moreover, it is shown that Bacillus thuringensis best represents Bacillus anthracis-Sterne with respect to both EPM and hydrophobicity across all test buffers.

Bacillus thuringiensis as a surrogate for Bacillus anthracis in aerosol research

Characterization of candidate surrogate spores prior to experimental use is critical to confirm that the surrogate characteristics are as closely similar as possible to those of the pathogenic agent of interest. This review compares the physical properties inherent to spores of Bacillus anthracis (Ba) and Bacillus thuringiensis (Bt) that impact their movement in air and interaction with surfaces, including size, shape, density, surface morphology, structure and hydrophobicity. Also evaluated is the impact of irradiation on the physical properties of both Bacillus species. Many physical features of Bt and Ba have been found to be similar and, while Bt is considered typically non-pathogenic, it is in the B. cereus group, as is Ba. When cultured and sporulated under similar conditions, both microorganisms share a similar cylindrical pellet shape, an aerodynamic diameter of approximately 1 μm (in the respirable size range), have an exosporium with a hairy nap, and have higher relative hydrophobicities than other Bacillus species. While spore size, morphology, and other physical properties can vary among strains of the same species, the variations can be due to growth/sporulation conditions and may, therefore, be controlled. Growth and sporulation conditions are likely among the most important factors that influence the representativeness of one species, or preparation, to another. All Bt spores may, therefore, not be representative of all Ba spores. Irradiated spores do not appear to be a good surrogate to predict the behavior of non-irradiated spores due to structural damage caused by the irradiation. While the use of Bt as a surrogate for Ba in aerosol testing appears to be well supported, this review does not attempt to narrow selection between Bt strains. Comparative studies should be performed to test the hypothesis that viable Ba and Bt spores will behave similarly when suspended in the air (as an aerosol) and to compare the known microscale characteristics versus the macroscale response.

Contrasting evolutionary patterns of spore coat proteins in two Bacillus species groups are linked to a difference in cellular structure

BACKGROUND

The Bacillus subtilis-group and the Bacillus cereus-group are two well-studied groups of species in the genus Bacillus. Bacteria in this genus can produce a highly resistant cell type, the spore, which is encased in a complex protective protein shell called the coat. Spores in the B. cereus-group contain an additional outer layer, the exosporium, which encircles the coat. The coat in B. subtilis spores possesses inner and outer layers. The aim of this study is to investigate whether differences in the spore structures influenced the divergence of the coat protein genes during the evolution of these two Bacillus species groups.

RESULTS

We designed and implemented a computational framework to compare the evolutionary histories of coat proteins. We curated a list of B. subtilis coat proteins and identified their orthologs in 11 Bacillus species based on phylogenetic congruence. Phylogenetic profiles of these coat proteins show that they can be divided into conserved and labile ones. Coat proteins comprising the B. subtilis inner coat are significantly more conserved than those comprising the outer coat. We then performed genome-wide comparisons of the nonsynonymous/synonymous substitution rate ratio, dN/dS, and found contrasting patterns: Coat proteins have significantly higher dN/dS in the B. subtilis-group genomes, but not in the B. cereus-group genomes. We further corroborated this contrast by examining changes of dN/dS within gene trees, and found that some coat protein gene trees have significantly different dN/dS between the B subtilis-clade and the B. cereus-clade.

CONCLUSIONS

Coat proteins in the B. subtilis- and B. cereus-group species are under contrasting selective pressures. We speculate that the absence of the exosporium in the B. subtilis spore coat effectively lifted a structural constraint that has led to relaxed negative selection pressure on the outer coat.

The Bacillus subtilis endospore: assembly and functions of the multilayered coat

Sporulation in Bacillus subtilis involves an asymmetric cell division followed by differentiation into two cell types, the endospore and the mother cell. The endospore coat is a multilayered shell that protects the bacterial genome during stress conditions and is composed of dozens of proteins. Recently, fluorescence microscopy coupled with high-resolution image analysis has been applied to the dynamic process of coat assembly and has shown that the coat is organized into at least four distinct layers. In this Review, we provide a brief summary of B. subtilis sporulation, describe the function of the spore surface layers and discuss the recent progress that has improved our understanding of the structure of the endospore coat and the mechanisms of coat assembly.

The role of the exosporium in the environmental distribution of anthrax

AIMS

To determine the contribution of the exosporium, the outer layer of the Bacillus anthracis spore, to soil attachment. Persistence of spores in soil and their ability to infect animals has been linked to a range of factors which include the presence of organic material and calcium (OMC), pH > 6.0, temperatures above 15.5°C and cycles of local flooding which are thought to transport buried spores to the surface.

METHODS AND RESULTS

The ability of wild type (exosporium +ve) and sonicated (exosporium -ve) spores to bind to soils which differed in their composition was determined using a flow-through soil column-based method. A statistically significant difference (P < 0.05) in the binding of wild type spores was observed with spores adhering more firmly to the soil with the highest OMC content. We also found that the removal of the exosporium increased the ability of the spore to adhere to both soil types.

CONCLUSION

Structures within the exosporium affected the ability of B. anthracis spores to bind to different soil types. Not surprisingly, wild type spores adhered to soil which has been shown to favour the persistence of the pathogen.

SIGNIFICANCE AND IMPACT OF THE STUDY

The ability to persist in and colonise the soil surface is a key requirement of a pathogen which infects grazing animals. By characterising the process involved, we will be better placed to develop strategies to disrupt the infection cycle.

Effect of pH on the electrophoretic mobility of spores of Bacillus anthracis and its surrogates in aqueous solutions

The electrophoretic mobility (EPM) of endospores of Bacillus anthracis and surrogates was measured in aqueous solution across a broad pH range and several ionic strengths. EPM values trended around phylogenetic clustering based on the 16S rRNA gene. Measurements reported here provide new insight for Bacillus anthracis surrogate selection and for attachment/detachment and transport studies.

Adsorption of β-galactosidase of Alicyclobacillus acidocaldarius on wild type and mutants spores of Bacillus subtilis

BACKGROUND

The Bacillus subtilis spore has long been used as a surface display system with potential applications in a variety of fields ranging from mucosal vaccine delivery, bioremediation and biocatalyst development. More recently, a non-recombinant approach of spore display has been proposed and heterologous proteins adsorbed on the spore surface. We used the well-characterized β-galactosidase from the thermoacidophilic bacterium Alicyclobacillus acidocaldarius as a model to study enzyme adsorption, to analyze whether and how spore-adsorption affects the properties of the enzyme and to improve the efficiency of the process.

RESULTS

We report that purified β-galactosidase molecules were adsorbed to purified spores of a wild type strain of B. subtilis retaining ca. 50% of their enzymatic activity. Optimal pH and temperature of the enzyme were not altered by the presence of the spore, that protected the adsorbed β-galactosidase from exposure to acidic pH conditions. A collection of mutant strains of B. subtilis lacking a single or several spore coat proteins was compared to the isogenic parental strain for the adsorption efficiency. Mutants with an altered outermost spore layer (crust) were able to adsorb 60-80% of the enzyme, while mutants with a severely altered or totally lacking outer coat adsorbed 100% of the β-galactosidase molecules present in the adsorption reaction.

CONCLUSION

Our results indicate that the spore surface structures, the crust and the outer coat layer, have an negative effect on the adhesion of the β-galactosidase. Electrostatic forces, previously suggested as main determinants of spore adsorption, do not seem to play an essential role in the spore-β-galactosidase interaction. The analysis of mutants with altered spore surface has shown that the process of spore adsorption can be improved and has suggested that such improvement has to be based on a better understanding of the spore surface structure. Although the molecular details of spore adsorption have not been fully elucidated, the efficiency of the process and the pH-stability of the adsorbed molecules, together with the well documented robustness and safety of spores of B. subtilis, propose the spore as a novel, non-recombinant system for enzyme display.

Physical basis for the adaptive flexibility of Bacillus spore coats

Bacillus spores are highly resistant dormant cells formed in response to starvation. The spore is surrounded by a structurally complex protein shell, the coat, which protects the genetic material. In spite of its dormancy, once nutrient is available (or an appropriate physical stimulus is provided) the spore is able to resume metabolic activity and return to vegetative growth, a process requiring the coat to be shed. Spores dynamically expand and contract in response to humidity, demanding that the coat be flexible. Despite the coat's critical biological functions, essentially nothing is known about the design principles that allow the coat to be tough but also flexible and, when metabolic activity resumes, to be efficiently shed. Here, we investigated the hypothesis that these apparently incompatible characteristics derive from an adaptive mechanical response of the coat. We generated a mechanical model predicting the emergence and dynamics of the folding patterns uniformly seen in Bacillus spore coats. According to this model, spores carefully harness mechanical instabilities to fold into a wrinkled pattern during sporulation. Owing to the inherent nonlinearity in their formation, these wrinkles persist during dormancy and allow the spore to accommodate changes in volume without compromising structural and biochemical integrity. This characteristic of the spore and its coat may inspire design of adaptive materials.

Domains of BclA, the major surface glycoprotein of the B. cereus exosporium: glycosylation patterns and role in spore surface properties

The role of the BclA domains of B. cereus ATCC 14579 was investigated in order to understand the phenomena involved in the interfacial processes occurring between spores and inert surfaces. This was done by (i) creating deletions in the collagen-like region (CLR) and the C-terminal domain (CTD) of BclA, (ii) building BclA proteins with various lengths in the CLR and (iii) modifying the hydrophobic upper surface in the CTD. First, it was demonstrated that the CLR was substituted by three residues already reported in the CLR of B. anthracis, viz. rhamnose, 3-O-methyl-rhamnose, and GalNH(2) residues, while the CTD was also substituted by two additional glycosyl residues, viz. 2-O-methyl-rhamnose and 2,4-O-methyl-rhamnose. Regarding the properties of the spores, both CLR and CTD contributed to the adhesion of the spores, which was estimated by measuring the resistance to detachment of spores adhered to stainless steel plates). CLR and CTD also impacted the hydrophobic character and isoelectric point of the spores. It was then shown that the resistance to detachment of the spores was not affected by the physicochemical properties, but by the CLR length and the presence of hydrophobic amino acids on the CTD.

Conjugated-polyelectrolyte-grafted cotton fibers act as "micro flypaper" for the removal and destruction of bacteria

We demonstrate herein a method for chemically modifying cotton fibers and cotton-containing fabric with a light-activated, cationic phenylene-ethynylene (PPE-DABCO) conjugated polyelectrolyte biocide. When challenged with Pseudomonas aeruginosa and Bacillus atropheaus vegetative cells from liquid suspension, light-activated PPE-DABCO effects 1.2 and 8 log, respectively, losses in viability of the exposed bacteria. These results suggest that conjugated polyelectrolytes retain their activity when grafted to fabrics, showing promise for use in settings where antimicrobial textiles are needed.

Role played by exosporium glycoproteins in the surface properties of Bacillus cereus spores and in their adhesion to stainless steel

Bacillus cereus spores are surrounded by a loose-fitting layer called the exosporium, whose distal part is mainly formed from glycoproteins. The role played by the exosporium glycoproteins of B. cereus ATCC 14579 (BclA and ExsH) was investigated by considering hydrophobicity and charge, as well as the properties of spore adhesion to stainless steel. The absence of BclA increased both the isoelectric point (IEP) and hydrophobicity of whole spores while simultaneously reducing the interaction between spores and stainless steel. However, neither the hydrophobicity nor the charge associated with BclA could explain the differences in the adhesion properties. Conversely, ExsH, another exosporium glycoprotein, did not play a significant role in spore surface properties. The monosaccharide analysis of B. cereus ATCC 14579 showed different glycosylation patterns on ExsH and BclA. Moreover, two specific glycosyl residues, namely, 2-O-methyl-rhamnose (2-Me-Rha) and 2,4-O-methyl-rhamnose (2,4-Me-Rha), were attached to BclA, in addition to the glycosyl residues already reported in B. anthracis.

Microwave inactivation of Bacillus atrophaeus spores in healthcare waste

Public healthcare wastes from the region of Ribeirão Preto, Brazil, pre-sterilized in an autoclave, were inoculated with spores of Bacillus atrophaeus for microwave processing on a laboratory scale. The influence of waste moisture (40%, 50% and 60% wet basis), presence of surfactant, power per unit mass of waste (100, 150 and 200 W/kg) and radiation exposure time (from 5 to 40 min) on the heating curves was investigated. The most favorable conditions for waste heating with respect to moisture and use of surfactant were then applied in an experimental analysis of the degree of inactivation of B. atrophaeus spores as a function of time and power per unit mass of waste. Based on Chick's and Arrhenius laws, the experimental results were adjusted by the least squares method to determine the activation energies (9203-5782 J/mol) and the Arrhenius pre-exponential factor (0.23 min(-1)). The kinetic parameters thus obtained enabled us to predict the degree of inactivation achieved for B. atrophaeus spores in typical healthcare waste. The activation energy was found to decrease as the power per waste mass increased, leading to the conclusion that, in addition to the thermal effect on the inactivation of B. atrophaeus spores, there was an effect inherent to radiation.

Spore-forming Bacilli and Clostridia in human disease

Many Gram-positive spore-forming bacteria in the Firmicute phylum are important members of the human commensal microbiota, which, in rare cases, cause opportunistic infections. Other spore-formers, however, have evolved to become dedicated pathogens that can cause a striking variety of diseases. Despite variations in disease presentation, the etiologic agent is often the spore, with bacterially produced toxins playing a central role in the pathophysiology of infection. This review will focus on the specific diseases caused by spores of the Clostridia and Bacilli.

B cell development in GALT: role of bacterial superantigen-like molecules

Intestinal bacteria drive the formation of lymphoid tissues, and in rabbit, bacteria also promote development of the preimmune Ab repertoire and positive selection of B cells in GALT. Previous studies indicated that Bacillus subtilis promotes B cell follicle formation in GALT, and we investigated the mechanism by which B. subtilis stimulates B cells. We found that spores of B. subtilis and other Bacillus species, including Bacillus anthracis, bound rabbit IgM through an unconventional, superantigen-like binding site, and in vivo, surface molecules of B. anthracis spores promoted GALT development. Our study provides direct evidence that B cell development in GALT may be driven by superantigen-like molecules, and furthermore, that bacterial spores modulate host immunity.

A distance-weighted interaction map reveals a previously uncharacterized layer of the Bacillus subtilis spore coat

Bacillus subtilis spores are encased in a protein assembly called the spore coat that is made up of at least 70 different proteins. Conventional electron microscopy shows the coat to be organized into two distinct layers. Because the coat is about as wide as the theoretical limit of light microscopy, quantitatively measuring the localization of individual coat proteins within the coat is challenging. We used fusions of coat proteins to green fluorescent protein to map genetic dependencies for coat assembly and to define three independent subnetworks of coat proteins. To complement the genetic data, we measured coat protein localization at subpixel resolution and integrated these two data sets to produce a distance-weighted genetic interaction map. Using these data, we predict that the coat comprises at least four spatially distinct layers, including a previously uncharacterized glycoprotein outermost layer that we name the spore crust. We found that crust assembly depends on proteins we predicted to localize to the crust. The crust may be conserved in all Bacillus spores and may play critical functions in the environment.