Effect of bases with different solubility on the release behavior of risperidone loaded PLGA microspheres

Improvement of liraglutide release from PLGA microspheres by a porous microsphere-gel composite system

In the current work, we aimed to prepare a liraglutide-loaded porous microsphere-gel composite system. By employing polyethylene glycol (PEG) as a porogenic agent and poly (lactic-co-glycolic acid) copolymer (PLGA) as a carrier, the liraglutide microspheres were prepared and dispersed in a temperature-sensitive gel made of poloxamer 407 (F-127) and poloxamer 188 (F-68), which served as the gel matrix, to construct the composite system. The porous microsphere-gel composite system demonstrated prolonged and steady drug release, with a reduction to 4.7% in the initial release within 1 d, according to data from in vitro release tests. The drug release from the porous microspheres decreased from 53% to 29% during the rapid release phase as the PEG concentration increased and the release rate slowed down. In vivo experiments in rats revealed that the composite system prolonged the release period by about 10 d. The pharmacokinetic parameter AUC0-1 was decreased by 24.78 ng/ml*h, the initial burst release was decreased, and the blood drug concentration fluctuation was lessened. The construction of a porous microsphere-gel composite matrix offers a novel approach to the systems with a sustained, long-lasting release that utilizes rational design.

Long-Acting Injectable Antipsychotics-A Review on Formulation and In Vitro Dissolution

Long-acting injectable (LAI) neuroleptics constitute an effective therapeutical alternative for individuals suffering from persistent mental illness. These injectable pharmaceuticals help patients manage their condition better and improve long-term outcomes by preventing relapses and improving compliance. This review aims to analyse the current formulation aspects of LAI neuroleptics, with particular emphasis on analysis of drug release profiles as a critical test to guarantee drug quality and relevant therapeutical activity. While there is no officially approved procedure for depot parenteral drug formulations, various dissolution tests which were developed by LAI manufacturers are described. In vitro dissolution tests also possess a critical function in the estimation of the in vivo performance of a drug formulation. For that reason, thorough inspection of the in vitro-in vivo correlation (IVIVC) is also discussed.

The recent insight in the release of anticancer drug loaded into PLGA microspheres

Cancer is a series of diseases leading to a high rate of death worldwide. Microspheres display specific characteristics that make them appropriate for a variety of biomedical purposes such as cancer therapy. Newly, microspheres have the potentials to be used as controlled drug release carriers. Recently, PLGA-based microspheres have attracted exceptional attention relating to effective drug delivery systems (DDS) because of their distinctive properties for a simple preparation, biodegradability, and high capability of drug loading which might be increased drug delivery. In this line, the mechanisms of controlled drug release and parameters that influence the release features of loaded agents from PLGA-based microspheres should be mentioned. The current review is focused on the new development of the release features of anticancer drugs, which are loaded into PLGA-based microspheres. Consequently, future perspective and challenges of anticancer drug release from PLGA-based microspheres are mentioned concisely.

How bulk fluid renewal can affect in vitro drug release from PLGA implants: Importance of the experimental set-up

The aim of this study was to better understand the potential impact of partial vs. complete renewal of the bulk fluid during drug release measurements from poly (lactic-co-glycolic acid) (PLGA)-based implants. A “standard experimental set-up”, in which the implants were directly exposed to well agitated phosphate buffer pH 7.4 was used, as well as set-ups, in which the implants were embedded within agarose hydrogels (mimicking living tissue). The gels were exposed to well agitated phosphate buffer pH 7.4. Ibuprofen-loaded implants were prepared by hot melt extrusion. The systems were thoroughly characterized before and during drug release by optical and scanning electron microscopy, gravimetric analysis, pH and solubility measurements as well as gel permeation chromatography. The bulk fluid was either completely or partially replaced by fresh medium at each sampling time point. In all cases, sink conditions were provided in the agitated bulk fluids throughout the experiments. Interestingly, the agarose set-ups did not show any noteworthy impact of the bulk fluid sampling volume on the observed drug release patterns, whereas complete fluid renewal in the “standard set-up” led to accelerated drug release. This could be explained by the considerable fragility of the implants once substantial polymer swelling set on, transforming them into PLGA gels: Complete fluid renewal caused partial disintegration and damage of the highly swollen systems, decreasing the lengths of the diffusion pathways for the drug. The mechanical stress is very much reduced at low sampling volumes, or if the implants are embedded within agarose gels. Thus, great care must be taken when defining the conditions for in vitro drug release measurements from PLGA-based implants: Once substantial system swelling sets on, the devices become highly fragile.

Supercritical CO2 versus water as an antisolvent in the crystallization process to enhance dissolution rate of curcumin

Antisolvent crystallization approach using either water (in conventional crystallization process (WAS)), or supercritical CO₂ (in supercritical anti-solvent crystallization (SCAS)), was employed in presence of hydroxypropyl methylcellulose (HPMC) to enhance the dissolution of curcumin. The impact of pressure, temperature and depressurization time on the SCAS process was studied using the Box-Behnken design to achieve the highest saturation solubility. A physical mixture of curcumin-HPMC was prepared for comparison purposes. Saturation solubility, scanning electron microscopy, differential scanning calorimetry, X-ray diffraction analysis and Fourier transform infrared spectroscopy were conducted to characterize the solid-state characteristics of the crystallized samples. Dissolution studies helped in ascertaining the effects of the crystallization techniques on the performance of the formulation. Curcumin crystalized by different antisolvent displayed varied shapes, sizes, saturation solubility's and dissolution properties. In SCAS process, the maximum saturation solubility (2.83 µg/mL) was obtained when the pressure, temperature and depressurization time were 275 bars, 55 °C, and 22 min respectively. The SCAS samples showed the highest dissolution (70%) in 30 min compared to WAS (27%), physical mixture (18%) and unprocessed curcumin (16%). The improved dissolution rate of SCAS sample originates from the development of sponge-like particles with augmented porosity, decreased crystallinity as well as increased solubility of curcumin.

New long-acting injectable microspheres prepared by IVL-DrugFluidic™ system: 1-month and 3-month in vivo drug delivery of leuprolide

The microspheres for 1-month (PLGA-based) and 3-month (PLA-based) drug releases of leuprolide were manufactured using an IVL-DrugFluidic™ system and their morphology, particle size and distribution, and encapsulation efficiency were compared with the commercialized products. In vivo test was also conducted to monitor the amount of leuprolide and testosterone in plasma after a single subcutaneous injection in male Sprague-Dawley (SD) rats and male Beagle dogs. The median diameter, span value, drug loading, and encapsulation efficiency of PLGA-based microspheres (63.29 μm, 0.26, 13.15%, and 78.90%, respectively) and PLA-based microspheres (80.28 μm, 0.21, 14.42%, and 86.50%, respectively) demonstrated narrow particle size distribution (monodispersed) and efficient drug loading/encapsulation efficiency. Both the microspheres exhibited a desired time-dependent drug release profile and reduced initial burst release by 16-fold in SD rats and 240-fold in Beagle dogs compared to Leuplin DPS®. Moreover, the testosterone level in plasma was suppressed to < 0.50 ng/mL after 28 days with a steady plasma drug concentration. The results suggested that newly developed leuprolide-loaded microspheres produced by the IVL-DrugFluidic™ system could provide extended drug release with advantages such as reduced initial burst release and testosterone level suppression, along with steady plasma drug concentration, over the existing products.

Exenatide Microspheres for Monthly Controlled-Release Aided by Magnesium Hydroxide

GLP-1 receptor agonists are a class of diabetes medicines offering self-regulating glycemic efficacy and may best be administrated in long-acting forms. Among GLP-1 receptor agonists, exenatide is the one requiring the least dose so that controlled-release poly(d,l-lactic-co-glycolic acid) (PLGA) microspheres may best achieve this purpose. Based on this consideration, the present study extended the injection interval of exenatide microspheres from one week of the current dosage form to four weeks by simply blending Mg(OH)₂ powder within the matrix of PLGA microspheres. Mg(OH)₂ served as the diffusion channel creator in the earlier stage of the controlled-release period and the decelerator of the self-catalyzed degradation of PLGA (by the formed lactic and glycolic acids) in the later stage due to its pH-responsive solubility. As a result, exenatide gradually diffused from the microspheres through Mg(OH)₂-created diffusion channels before degradation of the PLGA matrix, followed by a mild release due to Mg(OH)₂-buffered degradation of the polymer skeleton. In addition, an extruding–settling process comprising squeezing the PLGA solution through a porous glass membrane and sedimentation-aided solidification of the PLGA droplets was used to prepare the microspheres to ensure narrow size distribution and 95% encapsulation efficiency in an aqueous continuous phase. A pharmacokinetic study using rhesus monkey model confirmed the above formulation design by showing a steady blood concentration profile of exenatide with reduced C_MAX and dosage form index. Mg(OH)₂.

Preparation of long-acting microspheres loaded with octreotide for the treatment of portal hypertensive

The purpose of this study was to optimize the preparation method of injectable Octreotide microspheres. To explore the correlation between the solvent system and the general properties of microspheres to reduce burst release and enable them to be used for portal hypertension. Octreotide microspheres were prepared by modified double emulsion solution evaporation method after optimizing preparation conditions. The results showed that Octreotide microspheres had a particle size of 57.48 ± 15.24 μm, and the initial release was significantly reduced. In vitro release and in vivo pharmacokinetic data indicated that Octreotide was released stably within 1200 h. The effects on portal vein pressure, liver tissue morphology and other related indexes were observed after administration. As obvious results, injection of Octreotide microspheres could significantly reduce portal vein pressure and reduce the portal vein lumen area in experimental cirrhotic portal hypertensive rats. The optimized Octreotide PLGA microsphere preparation has been proved to have a good effect on PHT in vivo after detecting aminotransferase (AST) and alanine aminotransferase (ALT) activity, liver tissue hydroxyproline (Hyp) content, serum and liver tissue malondialdehyde (MDA) levels, plasma prostacyclin (PGI₂) levels, and liver tissue tumor necrosis factor (TNFα) content. In addition, serum and liver tissue superoxide dismutase (SOD) activity and liver tissue glutathione (GSH) content, plasma thromboxane (TXA₂), serum nitric oxide (NO), liver tissue nitric oxide synthase (NOS), and plasma and liver tissue endothelin (ET) were significantly increased.

The effect of topical administration of simvastatin on entochondrostosis and intramembranous ossification: An animal experiment

Background

Simvastatin, a drug for lowering serum cholesterol, has been shown to enhance bone regeneration, but few studies have qualitatively and quantitatively tested its effect when used topically in different animal models. This study aims to investigate topical administration of simvastatin as a bone regeneration inducer by testing its effect on bone formation in both long tubular bone and flat bone defect, and the mechanism involved.

Methods

Two animal models were used for testing the effect of simvastatin on entochondrostosis and intramembranous ossification respectively. Simvastatin of different dosages combined with poly lactic acid were implanted in extreme radial defects of 12 adult male New Zealand rabbits. Bone formation was monitored using x-ray and CT-scan and measured using x-ray scales, pixel values and spiral CT-scan for 16 weeks before being subject to histological and immunohistochemistry examination. The result was compared with that of autograft and blank control groups. Simvastatin with thrombin and fibrin sealant were implanted in calvarial defects of three Rhesus monkeys and monitored for 18 weeks. Bone formation was compared between the simvastatin and the blank control group using spiral CT-scan and histological examination.

Results

Both visual and quantitative measurements by x-ray and spiral CT-scan indicated significant bone formation in radial defects in all simvastatin groups and the autograft group whereas no bone formation was found in control groups. There was no significant difference in bone formation quantity between 100 ​mg simvastatin and autograft. Histological and immunohistochemistry examination indicated entochondrostosis in association with positive expression of BMP-2 and HIF-1 alpha. Spiral CT-scan and histological examination of calvarial defects of monkeys showed intramembranous ossification after simvastatin implantation. No change was found in the control group.

Conclusions

Topical administration of simvastatin induces entochondrostosis and intramembranous ossification by enhancing expression of BMP-2 and HIF-1 alpha. The effect of simvastatin on bone regeneration is comparable to autograft.

The translational potential of this article

Topical administration of simvastatin can repair bone defect in both long tubular bones and flat bones of rabbits and monkeys as effectively as autograft. Given that it is cheap, safe and already in clinical use, simvastatin might be considered as a bone regeneration inducer with great potential.

The effect of polymer blends on initial release regulation and in vitro-in vivo relationship of peptides loaded PLGA-Hydrogel Microspheres

The aim of this study was to resolve the lag time problem for peptides loaded PLGA-Hydrogel Microspheres (PLGA-gel-Ms) by blending low molecular PLGA (Mw. 1 kDa) into PLGA (Mw. 10 kDa) as an intrinsic porogen, and then assess the in vitro-in vivo relationship (IVIVR). Here, Goserelin acetate (GOS) was chosen as the model peptides. When compared to additional types of porogen, the intrinsic porogen avoided impurities remaining and protected the bioactivities of the peptides. By adding 10% PLGA (Mw. 1 kDa), the lag time was eliminated both in vitro and in vivo with a desirable EE (97.04% ± 0.51%). The release mechanisms were found to be: a) initial GOS release mainly controlled by pores diffusion and b) autocatalysis of PLGA (Mw. 1 kDa) which increased the quantity of aqueous pores, as revealed by SEM images. To solve the challenges caused by multiphasic release profiles, for the first time the Segmented phases IVIVR were proposed and developed, and showed improved linear fitting effects and supported the proposed release mechanisms. The application of PLGA blends could provide a new insight into PLGA microsphere initial release rate regulation.

Zero-order drug delivery: State of the art and future prospects

Pharmaceutical drugs are an important part of the global healthcare system, with some estimates suggesting over 50% of the world's population takes at least one medication per day. Most drugs are delivered as immediate-release formulations that lead to a rapid increase in systemic drug concentration. Although these formulations have historically played an important role, they can be limited by poor patient compliance, adverse side effects, low bioavailability, or undesirable pharmacokinetics. Drug delivery systems featuring first-order release kinetics have been able to improve pharmacokinetics but are not ideal for drugs with short biological half-lives or small therapeutic windows. Zero-order drug delivery systems have the potential to overcome the issues facing immediate-release and first-order systems by releasing drug at a constant rate, thereby maintaining drug concentrations within the therapeutic window for an extended period of time. This release profile can be used to limit adverse side effects, reduce dosing frequency, and potentially improve patient compliance. This review covers strategies being employed to attain zero-order release or alter traditionally first-order release kinetics to achieve more consistent release before discussing opportunities for improving device performance based on emerging materials and fabrication methods.

Delivery of FK506-loaded PLGA nanoparticles prolongs cardiac allograft survival

In this study, FK506-loaded poly(lactide-co-glycolide) nanoparticles (PLGA-FK506-NPs) were developed using an O/W emulsion solvent evaporation method. The PLGA-FK506-NPs were observed to be monodispersed and spherical by transmission and scanning electron microscopy. The mean size and zeta potential measured by dynamic light scattering were 110 ± 1.3 nm and -20.56 ± 3.65 mV, respectively. The FK506 entrapment and loading efficiency were 94.46 ± 1.88% and 5.38 ± 0.24%, respectively. Moreover, a pharmacokinetics study revealed that the PLGA-FK506-NPs behaved significantly different than free FK506 by exhibiting a higher area under curve (1.69-fold), higher mean residence time (1.29-fold), slower clearance and longer elimination half-life. Notably, the concentrations of FK506 in the spleen and mesenteric lymph nodes of the PLGA-FK506-NP group were 3.1-fold and 2.9-fold higher than those of the free FK506 group. Furthermore, the immunosuppressive efficacy was evaluated in a rat heterotopic heart transplantation model, and the results showed that PLGA-FK506-NP treatment could successfully alleviate acute rejection and prolong allograft survival compared with the free FK506 treatment (mean survival time, 17.1 ± 2.0 versus 13.3 ± 1.7 days). In conclusion, PLGA-FK506-NPs are a promising formulation for spleen and lymph node delivery and have potential use in the treatment of cardiac allograft acute rejection.

Risperidone-Loaded PLGA-Lipid Particles with Improved Release Kinetics: Manufacturing and Detailed Characterization by Electron Microscopy and Nano-CT

For parenteral controlled drug release, the desired zero order release profile with no lag time is often difficult to achieve. To overcome the undesired lag time of the current commercial risperidone controlled release formulation, we developed PLGA-lipid microcapsules (MCs) and PLGA-lipid microgels (MGs). The lipid phase was composed of middle chain triglycerides (MCT) or isopropylmyristate (IPM). Hydroxystearic acid was used as an oleogelator. The three-dimensional inner structure of Risperidone-loaded MCs and MGs was assessed by using the invasive method of electron microscopy with focused ion beam cutting (FIB-SEM) and the noninvasive method of high-resolution nanoscale X-ray computed tomography (nano-CT). FIB-SEM and nano-CT measurements revealed the presence of highly dispersed spherical structures around two micrometres in size. Drug release kinetics did strongly depend on the used lipid phase and the presence or absence of hydroxystearic acid. We achieved a nearly zero order release without a lag time over 60 days with the MC-MCT formulation. In conclusion, the developed lipid-PLGA microparticles are attractive alternatives to pure PLGA-based particles. The advantages include improved release profiles, which can be easily tuned by the lipid composition.

Influence of drying processes on the structures, morphology and in vitro release profiles of risperidone-loaded PLGA microspheres

The purpose of this study was to investigate the influences of drying methods on the risperidone (RIS) release profiles of RIS-loaded PLGA microspheres. These microspheres were fabricated with an O/W emulsion solvent evaporation method. The wet microspheres were dried with freeze drying and vacuum drying methods. The microspheres were mono-dispersed spheres with an average diameter of 100 μm. Studies found that drying methods had great influence on the porosity, morphology, and release profiles of RIS-loaded PLGA microspheres. Specifically, the freeze-dried microspheres had higher porosity (78.46 ± 1.64%) than those vacuum-dried ones (52.45 ± 2.68%), and they showed higher RIS release rates (p < 0.05). In the accelerated release tests (45 °C), these microspheres dried under the pressures of 700 mmHg and 200 mmHg gave faster release rates than those ones dried under the pressure of 450 mmHg. Importantly, the accelerated release test (45 °C) had a high correlation with the real-time test (37 °C) (R² > 0.99). These studies exhibited a significance in the precise preparation of RIS-loaded PLGA microspheres.

Risperidone Controlled Release Microspheres Based on Poly(Lactic Acid)-Poly(Propylene Adipate) Novel Polymer Blends Appropriate for Long Acting Injectable Formulations

The present study evaluates the preparation of risperidone controlled release microspheres as appropriate long-acting injectable formulations based on a series of novel biodegradable and biocompatible poly(lactic acid)⁻poly(propylene adipate) (PLA/PPAd) polymer blends. Initially, PPAd was synthesized using a two-stage melt polycondensation method (esterification and polycondensation) and characterized by 1H-NMR, differential scanning calorimetry (DSC), and powder X-ray diffraction (XRD) analyses. DSC and XRD results for PLA/PPAd blends (prepared by the solvent evaporation method) showed that these are immiscible, while enzymatic hydrolysis studies performed at 37 °C showed increased mass loss for PPAd compared to PLA. Risperidone-polyester microparticles prepared by the oil⁻water emulsification/solvent evaporation method showed smooth spherical surface with particle sizes from 1 to 15 μm. DSC, XRD, and Fourier-transformed infrared (FTIR) analyses showed that the active pharmaceutical ingredient (API) was dispersed in the amorphous phase within the polymer matrices, whereas in vitro drug release studies showed risperidone controlled release rates in all PLA/PPAd blend formulations. Finally, statistical moment analysis showed that polyester hydrolysis had a major impact on API release kinetics, while in PLA/PPAd blends with high PLA content, drug release was mainly controlled by diffusion.

Preparation and characterization of silk fibroin hydrogel as injectable implants for sustained release of Risperidone

The principal objective of the present study is to achieve a depot formulation of Risperidone by gelation of silk fibroin (SF). For this purpose, hydrochloric acid (HCl)/acetone-based and methanol-based hydrogels were prepared with different drug/polymer ratios (1:3, 1:6, and 1:15). For all the drug-loaded methanol-based hydrogels, gel transition of SF solutions occurred immediately and the gelation time was 1 min, while the gelation time of HCL/acetone-based hydrogels was around 360 min. According to the results obtined from Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) spectra, solvent systems and Risperidone could induce β-sheet structure, but HCL/acetone system had the lowest effect on induction of β-sheets. The crystallinity was increased by increasing the amount of Risperidone, and drug to polymer ratio of 1:3 possessed the highest crystallinity. Thermogravimetric analysis (TGA) indicated that increasing the amount of drug in formulation increased the stability of hydrogels, and methanol-based hydrogel with a ratio of 1:3 had the most stable structure. The release rate of Risperidone from methanol-based hydrogel at ratio of 1:3 was lower than that for HCl/acetone-based one, and it decreased by increasing the amount of Risperidone. The release of Risperidone from methanol hydrogel at ratios 1:3 and 1:6 continued up to 25 d which is acceptable for depot form of Risperidone and shows that the extended release of Risperidone was achieved successfully. In conclusion, SF hydrogel with the ability to respond to the environmental stimuli is an excellent candidate for injectable implants for extended release of Risperidone.

Comparative in vitro release and clinical pharmacokinetics of leuprolide from Luphere 3M Depot, a 3-month release formulation of leuprolide acetate

A 3-month depot formulation of leuprolide acetate (Luphere 3M Depot) with a mean microsphere diameter of 22.3 μm was prepared aseptically by spray-drying glacial acetic acid solution of the drug and polylactic acid, and lyophilization in a d-mannitol solution. The encapsulation efficiency and loading content of the drug in the Luphere 3M Depot were 94.7% and 9.92% (w/w), respectively. The in vitro release of leuprolide from the depot was substantially delayed and the release profile was similar to that of Lucrin Depot (Abbott Korea, Korea). The safety and pharmacokinetics of leuprolide were investigated over a period of 42 days in 20 prostate cancer patients following a subcutaneous injection of Luphere 3M or Lucrin Depot suspensions (leuprolide acetate dose of 11.25 mg) in a multi-center, randomized, single dose, parallel study. Both formulations were well tolerated by the patients and no serious adverse effects were observed during and after the study. No significant differences were observed in the maximum serum concentration (C_max) and area under the curve (AUC_last) of leuprolide between the two formulations. The results suggest comparable safety and efficacy profiles of Luphere 3M Depot and Lucrin Depot in clinical situations.

Sophoridine-loaded PLGA microspheres for lung targeting: preparation, in vitro, and in vivo evaluation

Lung-targeting sophoridine-loaded poly(lactide-co-glycolide) (PLGA) microspheres were constructed by a simple oil-in-oil emulsion-solvent evaporation method. The obtained microspheres were systematically studied on their morphology, size distribution, drug loading, encapsulation efficiency, in vitro release profile, and biodistribution in rats. The drug-loaded microparticles showed as tiny spheres under SEM and had an average size of 17 μm with 90% of the microspheres ranging from 12 to 24 μm. The drug loading and encapsulation efficiency were 65% and 6.5%, respectively. The in vitro drug release behavior of microspheres exhibited an initial burst of 16.6% at 4 h and a sustained-release period of 14 days. Drug concentration in lung tissue of rats was 220.10 μg/g for microspheres and 6.77 μg/g for solution after intraveneous injection for 30 min, respectively. And the microsphere formulation showed a significantly higher drug level in lung tissue than in other major organs and blood samples for 12 days. These results demonstrated that the obtained PLGA microspheres could potentially improve the treatment efficacy of sophoridine against lung cancer.

Preparation of a reproducible long-acting formulation of risperidone-loaded PLGA microspheres using microfluidic method

The aim of the present study is to prepare risperidone-loaded poly lactic-co-glycolic acid (PLGA) microspheres within microfluidic system and to achieve a formulation with uniform size and monotonic and reproducible release profile. In comparison to batch method, T-junction and serpentine chips were utilized and optimizing study was carried out at different processing parameters (e.g. PLGA and surfactant concentration and flow rates ratio of outer to inner phase). The computational fluid dynamic (CFD) modeling was performed, and loading and release study were carried out. CFD simulation indicates that increasing the flow rate of aqueous phase cause to decrease the droplet size, while the change in size of microspheres did not follow a specific pattern in the experimental results. The most uniform microspheres and narrowest standard deviation (66.79 μm ± 3.32) were achieved using T-junction chip, 1% polyvinylalcohol, 1% PLGA and flow rates ratio of 20. The microfluidic-assisted microspheres were more uniform with narrower size distribution. The release of risperidone from microspheres produced by the microfluidic method was more reproducible and closer to zero-order kinetic model. The release profile of formulation with 2:1 drug-to-polymer ratio was the most favorable release, in which 41.85% release could be achieved during 24 days.

Encapsulation of clozapine in polymeric nanocapsules and its biological effects

Clozapine is an effective atypical antipsychotic drug that unfortunately exhibits poor oral bioavailability. Moreover, the clinical use of the compound is limited because of its numerous unfavorable and unsafe side effects. Therefore, the aim of the present study was the development of a new nanocarrier for a more effective clozapine delivery. Here, clozapine was encapsulated into polymeric nanocapsules (NCs). Polyelectrolyte multilayer shells were constructed by the technique of sequential adsorption of polyelectrolytes (LbL) using biocompatible polyanion PGA (Poly-L-glutamic acid, sodium salt) and polycation PLL (poly-L-lysine) on clozapine-loaded nanoemulsion cores. Pegylated external layers were prepared using PGA-g-PEG (PGA grafted by PEG (polyethylene glycol)). Clozapine was successfully loaded into the PLL-PGA nanocarriers (CLO-NCs) with an average size of 100 nm. In vitro analysis of the interactions of the CLO-NCs with the cells of the mononuclear phagocytic system (MPS) was conducted. Cell biocompatibility, phagocytosis potential, and cellular uptake were studied. Additionally, the biodistribution and behavioral effects of the encapsulated clozapine were also studied. The results indicate that surface modified (by PEG grafting) polymeric PLL-PGA CLO-NCs are very promising nanovehicles for improving clozapine delivery.

A Uniform Ultra-Small Microsphere/SAIB Hybrid Depot with Low Burst Release for Long-Term Continuous Drug Release

PURPOSE

In the present study, a uniform ultra-small microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot (m-SAIB depot) was designed to provide a long-term sustained release drug delivery system which not only reduced the burst release of an SAIB depot, but also eliminated the lag-time of PLGA microspheres.

METHODS

Risperidone loaded m-SAIB depot (Ris-m-SAIB depot) was characterized by in vitro drug release, pharmacokinetics, in vivo degradation and biocompatibility, in comparison with risperidone loaded SAIB depot (Ris-SAIB depot).

RESULTS

Ris-m-SAIB depot showed a low burst release (0.64%) and a reduced in vitro drug release rate due to the encapsulation of most drug in microspheres. After intramuscular administration, the in vivo burst release of Ris-m-SAIB was significantly decreased, as reflected by the low Cmax/Cs(4-td) (approximately 30-fold reduction), in comparison with Ris-SAIB depot. From 4 to 78 days, Ris-m-SAIB depot showed a higher plasma drug level (1.55 ~ 16.30 ng/ml) with a steadier drug release profile compared with Ris-SAIB depot. Ris-m-SAIB depot degraded gradually with a degradation t1/2 of 54.6 days and exhibited good biocompatibility in vivo.

CONCLUSION

These results demonstrate the potential application of a uniform ultra-small microsphere/SAIB hybrid depot for continuously delivering small drug molecules for long periods of time without burst release.

The effect of crosslinking agent on sustained release of bFGF–collagen microspheres

Initial burst release and loss of bioactivity of drugs are the shortcomings of drug delivery systems (DDSs) used for in vivo treatment.

Fabrication, characterization, and controlled release of eprinomectin from injectable mesoporous PLGA microspheres

Batches of mesoporous poly(lactide-co-glycolide) (PLGA) microspheres were fabricated via an O/W emulsion–solvent evaporation method.

Biodegradable uniform microspheres based on solid-in-oil-in-water emulsion for drug delivery: A comparison of homogenization and fluidic device

Based on solid-in-oil-in-water emulsification, we fabricated biodegradable poly(ϵ-caprolactone) microspheres containing gentamicin using conventional homogenization and a fluidic device. The feasibility of the poly(ϵ-caprolactone) microspheres as drug carriers was evaluated in terms of encapsulation efficiency, release behavior of gentamicin, and antimicrobial activity. The poly(ϵ-caprolactone) microspheres prepared using a fluidic device (fluidic device microspheres) had a uniform diameter and a smooth surface, whereas the poly(ϵ-caprolactone) microspheres prepared using conventional homogenization (conventional homogenization microspheres) exhibited polydisperse and a porous structure. At 0.3 wt% of gentamicin concentration, the encapsulation efficiencies of the conventional homogenization and fluidic device microspheres were 39.5% and 72.0%, respectively. In addition, a significant amount of gentamicin was only released initially from the conventional homogenization microspheres, whereas the fluidic device microspheres released gentamicin in a sustained manner for 28 days. These results confirmed the superior performances of the uniform fluidic device microspheres for drug delivery system. We further proposed a model for microsphere formation to explain the difference in performance of the conventional homogenization and fluidic device microspheres.

Novel preparation method for sustained-release PLGA microspheres using water-in-oil-in-hydrophilic-oil-in-water emulsion

An increasing number of drugs are needing improved formulations to optimize patient compliance because of their short half-lives in blood. Sustained-release formulations of drugs are often required for long-term efficacy, and microspheres are among the most popular ones. When drugs are encapsulated into microsphere formulations, different methods of preparation need to be used according to specific clinical requirements and the differing physicochemical characteristics of individual drugs. In this work, we developed a novel method for sustained-release drug delivery using a water-in-oil-in-hydrophilic oil-in-water (w/o/oh/w) emulsion to encapsulate a drug into poly(lactic-co-glycolic acid) (PLGA) microspheres. Different effects were achieved by varying the proportions and concentrations of hydrophilic oil and PLGA. Scanning electron and optical microscopic images showed the surfaces of the microspheres to be smooth and that their morphology was spherical. Microspheres prepared using the w/o/oh/w emulsion were able to load protein efficiently and had sustained-release properties. These results indicate that the above-mentioned method might be useful for developing sustained-release microsphere formulations in the future.

Long-acting injectable formulations of antipsychotic drugs for the treatment of schizophrenia

Antipsychotic drugs have been used to treat patients with schizophrenia and other psychotic disorders. Long-acting injectable antipsychotic drugs are useful for improving medication compliance with a better therapeutic option to treat patients who lack insight or adhere poorly to oral medication. Several long-acting injectable antipsychotic drugs are clinically available. Haloperidol decanoate and fluphenazine decanoate are first-generation depot drugs, but the use of these medicines has declined since the advent of second-generation depot agents, such as long-acting risperidone, paliperidone palmitate, and olanzapine pamoate. The second-generation depot drugs are better tolerated and have fewer adverse neurological side effects. Long-acting injectable risperidone, the first depot formulation of an atypical antipsychotic drug, was prepared by encapsulating risperidone into biodegradable microspheres. Paliperidone palmitate is an aqueous suspension of nanocrystal molecules, and olanzapine pamoate is a microcrystalline salt of olanzapine and pamoic acid suspended in aqueous solution. This review summarizes the characteristics and recent research of formulations of each long-acting injectable antipsychotic drug.

Surgical wound healing using hemostatic gauze scaffold loaded with nanoparticles containing sustained-release granulocyte colony-stimulating factor

Background

The therapeutic strategies for malignant melanoma are still cancer chemotherapy, radiotherapy, and tumor resection. However, these therapeutic strategies often lead to a reduced neutrophilic granulocyte count or loss of more blood after surgical tumor resection. In this study, we developed a formulation of hemostatic gauze impregnated with sustained-release granulocyte colony-stimulating factor (G-CSF) with increasing of the neutrophilic granulocyte count in the blood following chemotherapy and decreasing blood loss after surgical tumor resection.

Methods

We designed a formulation with both hemostatic properties and increased neutrophil content to be used in cancer chemotherapy, radiotherapy, and tumor resection, comprising a hemostatic gauze as a scaffold and (G-CSF)-loaded dextran nanoparticles coated with polylactic-co- glycolic acid (PLGA) solution fabricated by direct spray-painting onto the scaffold and then vacuum-dried at room temperature. The performance of this system was evaluated in vitro and in vivo.

Results

Nearly zero-order release of G-CSF was recorded for 12–14 days, and the cumulative release of G-CSF retained over 90% of its bioactivity in a NFS-60 cell line proliferation assay when the scaffold was incubated in phosphate-buffered saline (pH 7.4) at 37°C. The in vivo hemostatic efficacy of this formulation was greater than that of native G-CSF, the scaffold directly spray-painted with G-CSF solution or PLGA organic solution as a coating, or when a blank scaffold was covered with the coating.

Conclusion

Our results suggest that this formulation has both hemostatic properties and increased neutrophil activity.

Facile fabrication of biocompatible PLGA drug-carrying microspheres by O/W pickering emulsions

This study is focused on the preparation of Ibuprofen (IBU) loaded micrometer-sized poly(lactic-co-glycolic acid) (PLGA) microspheres and process variables on the size, drug loading and release during preparation of formulation. Silicon dioxide (SiO(2)) nanoparticle-coated PLGA microspheres were fabricated via a combined system of "Pickering-type" emulsion route and solvent volatilization method in the absence of any molecular surfactants. Stable oil-in-water emulsions were prepared using SiO(2) nanoparticles as a particulate emulsifier and a dichloromethane (CH(2)Cl(2)) solution of PLGA as an oil phase. The SiO(2) nanoparticle-coated PLGA microspheres were fabricated by the evaporation of CH(2)Cl(2) in situ, and then bare-PLGA microspheres were prepared by removal of the SiO(2) nanoparticles using HF aqueous solution. The two types of microspheres were characterized in terms of size, component and morphology using scanning electronic microscope (SEM), Fourier-transform infrared, optical microscope, and so on. Moreover, IBU was encapsulated into the hybrid beads by dispersing them in the CH(2)Cl(2) solution of PLGA in the fabrication process. The sustained release could be obtained due to the barrier of the polymeric matrix (PLGA). More over, the release curves were nicely fitted by the Weibull equation and the release followed Fickian diffusion. The combined system of Pickering emulsion and solvent volatilization opens up a new route to fabricate a variety of microspheres. The resulting microspheres may find applications as delivery vehicles for biomolecules, drugs, cosmetics and living cells.