Adsorption induced enzyme denaturation: The role of protein surface in adsorption induced protein denaturation on allyl glycidyl ether (AGE)–ethylene glycol dimethacrylate (EGDM) copolymers

Recent progress in nanomaterial-based bioelectronic devices for biocomputing system

Bioelectronic devices have received the massive attention because of their huge potential to develop the core electronic components for biocomputing system. Up to now, numerous bioelectronic devices have been reported such as biomemory and biologic gate by employment of biomolecules including metalloproteins and nucleic acids. However, the intrinsic limitations of biomolecules such as instability and low signal production hinder the development of novel bioelectronic devices capable of performing various novel computing functions. As a way to overcome these limitations, nanomaterials have the great potential and wide applicability to grant and extend the electronic functions, and improve the inherent properties from biomolecules. Accordingly, lots of nanomaterials including the conductive metal, graphene, and transition metal dichalcogenide nanomaterials are being used to develop the remarkable functional bioelectronic devices like the multi-bit biomemory and resistive random-access biomemory. This review discusses the nanomaterial-based superb bioelectronic devices including the biomemory, biologic gates, and bioprocessors. In conclusion, this review will provide the interdisciplinary information about utilization of various novel nanomaterials applicable for biocomputing system.

Highly Sensitive Biosensors Based on Biomolecules and Functional Nanomaterials Depending on the Types of Nanomaterials: A Perspective Review

Biosensors are very important for detecting target molecules with high accuracy, selectivity, and signal-to-noise ratio. Biosensors developed using biomolecules such as enzymes or nucleic acids which were used as the probes for detecting the target molecules were studied widely due to their advantages. For example, enzymes can react with certain molecules rapidly and selectively, and nucleic acids can bind to their complementary sequences delicately in nanoscale. In addition, biomolecules can be immobilized and conjugated with other materials by surface modification through the recombination or introduction of chemical linkers. However, these biosensors have some essential limitations because of instability and low signal strength derived from the detector biomolecules. Functional nanomaterials offer a solution to overcome these limitations of biomolecules by hybridization with or replacing the biomolecules. Functional nanomaterials can give advantages for developing biosensors including the increment of electrochemical signals, retention of activity of biomolecules for a long-term period, and extension of investigating tools by using its unique plasmonic and optical properties. Up to now, various nanomaterials were synthesized and reported, from widely used gold nanoparticles to novel nanomaterials that are either carbon-based or transition-metal dichalcogenide (TMD)-based. These nanomaterials were utilized either by themselves or by hybridization with other nanomaterials to develop highly sensitive biosensors. In this review, highly sensitive biosensors developed from excellent novel nanomaterials are discussed through a selective overview of recently reported researches. We also suggest creative breakthroughs for the development of next-generation biosensors using the novel nanomaterials for detecting harmful target molecules with high sensitivity.

Protein at liquid solid interfaces: Toward a new paradigm to change the approach to design hybrid protein/solid-state materials

This review gives an overview of protein adsorption at solid/liquid interface. Compared to the other ones, we have focus on three main questions with the point of view of the protein. The first question is related to the kinetic and especially the using of Langmuir model to describe the protein adsorption. The second question is about the concept of hard and soft protein. In this part, we report the protein structural modification induced by adsorption regarding their intrinsic structure. This allows formulating of a new concept to classify the protein to predict their behavior at solid/liquid interface. The last question is related to the protein corona. We give an overview about the soft/hard corona and attempt to make correlation with the concept of hard/soft protein.

Development of Bioelectronic Devices Using Bionanohybrid Materials for Biocomputation System

Bioelectronic devices have been researched widely because of their potential applications, such as information storage devices, biosensors, diagnosis systems, organism-mimicking processing system cell chips, and neural-mimicking systems. Introducing biomolecules including proteins, DNA, and RNA on silicon-based substrates has shown the powerful potential for granting various functional properties to chips, including specific functional electronic properties. Until now, to extend and improve their properties and performance, organic and inorganic materials such as graphene and gold nanoparticles have been combined with biomolecules. In particular, bionanohybrid materials that are composed of biomolecules and other materials have been researched because they can perform core roles of information storage and signal processing in bioelectronic devices using the unique properties derived from biomolecules. This review discusses bioelectronic devices related to computation systems such as biomemory, biologic gates, and bioprocessors based on bionanohybrid materials with a selective overview of recent research. This review contains a new direction for the development of bioelectronic devices to develop biocomputation systems using biomolecules in the future.

Nano-Architecture Driven Plasmonic Field Enhancement in 3D Graphene Structures

The limited spatial coverage of the plasmon enhanced near-field in 2D graphene ribbons presents a major hurdle in practical applications. In this study, diverse self-assembled 3D graphene architectures are explored that induce hybridized plasmon modes by simultaneous in-plane and out-of-plane coupling to overcome the limited coverage in 2D ribbons. While 2D graphene can only demonstrate in-plane, bidirectional coupling through the edges, 3D architectures benefit from fully symmetric 360° coupling at the apex of pyramidal graphene, orthogonal four-directional coupling in cubic graphene, and uniform cross-sectional radial coupling in tubular graphene. The 3D coupled vertices, edges, surfaces, and volume induce corresponding enhancement modes that are highly dependent on the shape and dimensions comprising the 3D geometries. The hybridized modes introduced through the 3D coupling amplify the limited plasmon response in 2D ribbons to deliver nondiffusion limited sensors, high efficiency fuel cells, and extreme propagation length optical interconnects.

Electrochemical nitric oxide biosensor based on amine-modified MoS2/graphene oxide/myoglobin hybrid

Nitric oxide (NO) is one of the most important molecules in living things due to its role as a signaling molecule in influencing pathological and physiological mechanisms including neurotransmission. In this study, the electrochemical biosensor based on the amine-modified molybdenum disulfide nanoparticles (MoS₂), graphene oxide (GO) and myoglobin (Mb) hybrid material (amine-modified MoS₂/GO/Mb hybrid) is developed to achieve the accurate detection of NO with electrochemical signal improvement. For the first time, the synthesis of MoS₂ accompanying the amine-modification of the surface of MoS₂ is done to hybridize with GO efficiently through the short linkage. After the amine-modification of MoS₂, it is enclosed with GO directly (amine-modified MoS₂/GO). Then, Mb which can induce the reduction of NO is immobilized on the amine-modified MoS₂/GO to fabricate the amine-modified MoS₂/GO/Mb hybrid for NO detection. The prepared hybrid shows the signal improved redox properties relative to the result of the electrode prepared without hybrid. Furthermore, upon addition of NO, the electrode prepared with hybrid shows the improved amperometric response compared with that of the electrode without hybrid. This amine-modified MoS₂/GO/Mb hybrid can be used in the development of the biosensor platform accompanying the electrochemical signal improvement and accurate detection of target materials.

Protein-coated polymer as a matrix for enzyme immobilization: immobilization of trypsin on bovine serum albumin-coated allyl glycidyl ether-ethylene glycol dimethacrylate copolymer

Allyl glycidyl ether (AGE)-ethylene glycol dimethacrylate (EGDM) copolymer with 25% crosslink density (AGE-25) shows excellent bovine serum albumin (BSA) adsorption (up to 16% (w/w)) at pH 8.0 and the adsorbed BSA is strongly bound. This protein-coated polymer provides a novel matrix with naturally existing functional groups such as thiol, amino, and carboxylic acid that are available for covalent immobilization of functional enzymes. Employing appropriate strategies, trypsin as a model protein was covalently bound to BSA-coated matrix both independently, and in a stepwise manner on the same matrix, with less than 5% loss of enzyme activity during immobilization. Glutaraldehyde crosslinking after immobilization provide stable enzyme preparation with activity of 510 units/g recycled up to six times without loss of enzyme activity. AFM studies reveal that the polymer surface has protein peaks and valleys rather than a uniform monolayer distribution of the protein and the immobilized enzyme preparation can best be described as polymer supported cross-linked enzyme aggregates (CLEAs).

Comparison of polymer induced and solvent induced trypsin denaturation: the role of hydrophobicity

Trypsin adsorption from aqueous buffer by various copolymers of allyl glycidyl ether-ethylene glycol dimethacrylate (AGE-EGDM) copolymer with varying crosslink density increases with increasing crosslink density and the effect slowly wears off after reaching a plateau at 50% crosslink density. The copolymer with 25% crosslink density was reacted with different amines with alkyl/aryl side chains to obtain a series of copolymers with 1,2-amino alcohol functional groups and varying hydrophobicity. Trypsin binding capacity again increases with hydrophobicity of the reacting amine and a good correlation between logPoctanol of the amine and protein binding is observed. The bound trypsin is denatured to the extent of 90% in spite of the presence of hydrophilic hydroxyl and amino groups. The behavior was comparable to that in mixtures of aqueous buffer and water-miscible organic co-solvents where the solvent concentration required to deactivate 50% of the enzyme (C50) is dependent on logPoctanol of the co-solvent.