Polymeric material for anti-biofouling

A main chain biodegradable polyurethane with anti-protein adsorption and anti-bacterial adhesion performances

Biofilms are initially formed by substances such as proteins secreted by bacteria adhering to a surface. To achieve a durable antibacterial material, biodegradable dihydroxyl-terminated poly[(ethylene oxide)-co-(ethylene carbonate)] (PEOC(OH)2) with anti-protein adsorption properties was synthesized in this study. Further polycondensation of PEOC(OH)2 and isophorone diisocyanate (IPDI) led to biodegradable polyurethane (PEOC-PU) with PEOC as the soft segment. For comparison, polyurethanes with polyethylene glycol (PEG-PU) and polypropylene glycol (PPG-PU) as soft segments were also synthesized. The chemical structures of the polyurethanes were characterized by 1H NMR and FTIR. The biodegradation behavior of PEOC-PU promoted by lipase due to the presence of ethylene carbonate units was also studied. Their resistance to proteins was studied using quartz crystal microbalance with dissipation (QCM-D) and the results revealed that PEOC-PU exhibited excellent nonspecific resistance to proteins. The colonization of microorganisms on PU in the liquid culture medium was further examined and the results showed that PEOC-PU exhibited excellent antibacterial adhesion performance due to its protein resistance and biodegradation.

Hydrophobic Biodegradable Hyperbranched Copolymers with Excellent Marine Diatom Resistance

As the utilization of degradable polymer coatings increased, the accompanying trade-off between good degradability and high-efficiency antidiatom adhesion due to their hydrophobic nature remains unresolved. The study presents a new hydrophobic surface-fragmenting coating consisting of degradable hyperbranched polymers (hereafter denoted as h-LLA_x) synthesized by reversible complexation-mediated copolymerization with isobornyl acrylate (IBOA) and divinyl-functional oligomeric poly(l-lactide) (OLLA-V₂), both derived from biomass, that exhibited superior resistance (∼0 cell mm^-2) to marine diatom Navicula incerta (N. incerta) attachment with higher OLLA content. The combined impact of the microscale hollow semisphere micelles that self-assembled degradable hyperbranched copolymers and hydrolysis-driven self-renewable surfaces following immersion in seawater may account for the remarkable resistance of h-LLA_x coatings against N. incerta. Detailed investigations were conducted across multiple perspectives, from hydrolytic degradation to broad-spectrum antibacterial attachment to ecotoxicity assessment. The excellent features of high resistance to marine diatoms and bacterial attachment, degradability, and environmental friendliness make the as-prepared h-LLA_x coatings widely sought after for antifouling coating applications.

Nanocontainers Against Biofouling and Corrosion Degradation of Materials: A Short Review With Prospects

The current state of the art in active corrosion prevention is based on the use of macromolecular containers that can store and release corrosion inhibitors particularly to the surface when corrosion develops. These corrosion inhibitor-containing nano- or microcontainers are subsequently infused into coatings, allowing them to self-heal. Especially, nanocontainers for self-healing coatings with controlled corrosion inhibitors, energy storage, cement fracture repair, and antifouling metal protection have recently been developed. Incorporating these nanocontainers into materials in small amounts (e.g., 5–10 wt% in paints) provided anticorrosion protection that was incomparably better than the current approaches. Furthermore, the materials developed had multifunctional properties, including self-healing, antibacterial, and antimicrobial properties. The primary goal of this review was to compile the different research studies that have been published in a variety of publications so that the reader may better understand the potential of these new types of nanotechnology and the prospects for nanocontainers.

Silicone Elastomer with Self-Generating Zwitterions for Antifouling Coatings

Silicone elastomer-based fouling release coatings have been gaining increased attention in marine antibiofouling. However, the lack of fouling resistance limits their application. Introducing a zwitterionic polymer into silicone enhances its fouling resistance, but their incompatibility makes this challenging. In this work, a silicone elastomer with zwitterionic pendant chains has been prepared by grafting a telomer of tertiary carboxybetaine dodecafluoroheptyl ester ethyl acrylate (TCBF) and 3-mercaptopropyltriethoxysilane to the bis-silanol-terminated poly(dimethylsiloxane) (PDMS). The fluorocarbon groups drive the telomer onto the surface in the film formation process, while the TCBF groups hydrolyze and generate zwitterions on the surface, which is confirmed by attenuated total reflection infrared spectra analysis and water contact angle measurements. Bioassays using marine bacteria (Pseudomonas sp.) and diatoms (Navicula incerta) demonstrate that the antifouling efficacy is improved as the telomer content increases. The bacteria and diatom adhesion decreases by 95 and 81%, respectively, for the PDMS with 30 wt % telomer compared with the unmodified PDMS control. Meanwhile, the fouling release performance of PDMS is maintained with a pseudobarnacle removal strength of ∼0.1 MPa. This work provides a facile way to fabricate efficient silicone-based antifouling coatings.

Biomimetic surface coatings for marine antifouling: Natural antifoulants, synthetic polymers and surface microtopography

Marine biofouling is a ubiquitous problem that accompanies human marine activities and marine industries. It exerts detrimental impacts on the economy, environment, ecology, and safety. Traditionally, mainstream approaches utilize metal ions to prevent biological contamination, but this also leads to environmental pollution and damage to the ecosystem. Efficient and environmentally friendly coatings are urgently needed to prevent marine devices from biofouling. Since nature is always the best teacher for humans, it offers us delightful thoughts on the research and development of high-efficiency, broad-spectrum and eco-friendly antifouling coatings. In this work, we focus on the research frontier of marine antifouling coatings from a bionic perspective. Enlightened by three distinctive dimensions of bionics: chemical molecule bionic, physiological mechanism bionic, and physical structure bionic, the research status of three main bioinspired strategies, which are natural antifoulants, bioinspired polymeric antifouling coatings, and biomimetic surface microtopographies, respectively, are demonstrated. The antifouling mechanisms are further interpreted based on biomimetic comprehension. The main fabrication methods and antifouling performances of these coatings are presented along with their advantages and drawbacks. Finally, the challenges are summarized, and future research prospects are proposed. It is believed that biomimetic antifouling strategies will contribute to the development of nontoxic antifouling techniques with exceptional repellency and stability.

Kill-Resist-Renew Trinity: Hyperbranched Polymer with Self-Regenerating Attack and Defense for Antifouling Coatings

Traditional antifouling coatings are generally based on a single antifouling mechanism, which can hardly meet the needs of different occasions. Here, a single "kill-resist-renew trinity" polymeric coating integrating fouling killing, resistance, and releasing functions is reported. To achieve the design, a novel monomer-tertiary carboxybetaine ester acrylate with the antifouling group N-(2,4,6-trichlorophenyl)maleimide (TCB-TCPM) is synthesized and copolymerized with methacrylic anhydride via reversible addition-fragmentation chain transfer polymerization yielding a degradable hyperbranched polymer. Such a polymer at the surface/seawater is able to hydrolyze and degrade to short segments forming a dynamic surface (releasing). The hydrolysis of TCB-TCPM generates the antifouling groups TCPM (killing) and zwitterionic groups (resistance). Such a polymeric coating exhibits a controllable degradation rate, which increases with the degrees of branching. The antibacterial assay demonstrates that the antifouling ability arise from the synergistic effect of "attacking" and "defending". This study provides a new strategy to solve the challenging problem of marine biofouling.

Novel synthesized attapulgite nanoparticles-based hydrophobic monolithic column for in-tube solid-phase microextraction of thiosildenafil, pseudovardenafil, and norneosildenafil in functional foods

In this study, a novel method which involved in-tube solid-phase microextraction (SPME) using an attapulgite (ATP) nanoparticles-based hydrophobic monolithic column was successfully developed. It was coupled with high-performance liquid chromatography-ultraviolet detection for the determination of three phosphodiesterase-5 (PDE-5) inhibitors, including thiosildenafil, pseudovardenafil, and norneosildenafil, in functional foods. The monolithic column was prepared by one-step polymerization, using 3-trimethoxysilylpropyl methacrylate-modified ATP nanoparticles and 1-butyl-3-vinylimidazolium bromide (VBIMBr) as the functional monomers, and ethylene glycol dimethacrylate (EDMA) as the cross-linker. The obtained poly(ATP-VBIMBr-EDMA) monolith was characterized by scanning electron microscopy equipped with energy-dispersive analysis of X-ray, Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction. The adsorption capacity, up to 2.00 μg/cm calculated by the Langmuir isotherm model, was about six times that of the poly(VBIMBr-EDMA) monolith. Crucial factors affecting the extraction efficiency, including sample solvent, elution solvent, flow rates of sampling loading and elution, sample loading volume, and elution volume, were investigated in details. Under the optimal in-tube SPME conditions, the proposed method showed good reproducibility with run-to-run, column-to-column, and batch-to-batch relative standard deviations less than 7.2%, and low limits of detection of 0.5-0.9 ng/mL in real samples. Thiosildenafil was detected in four types of functional foods with the contents of 1.30-4.78 μg/g. This newly proposed in-tube SPME method based on poly(ATP-VBIMBr-EDMA) monolith may provide a simple, efficient, and promising alternative to daily monitoring of PDE-5 inhibitors in functional foods.

Self-healing, highly elastic and amphiphilic silicone-based polyurethane for antifouling coatings

Amphiphilic silicone-based polyurethane coatings with room temperature self-healing ability, high elasticity, excellent fouling release and fouling resistance have been reported.

UV-curable hyperbranched poly(ester-co-vinyl) by radical ring-opening copolymerization for antifouling coatings

UV-curable hyperbranched poly(ester-co-vinyl) has been prepared by radical ring-opening copolymerization of cyclic monomers and vinyl monomers, and it exhibits tunable degradation and fouling resistance.

Environmentally Friendly Marine Antifouling Coating Based on a Synergistic Strategy

The development of environmentally friendly and long-term marine antifouling coating remains a huge challenge in the maritime industry. For this purpose, we developed a novel and efficient antifouling coating based on a synergistic strategy, incorporating contact inhibition, fouling repelling, and antifouling properties. Results demonstrated that the coating could efficiently resist the adhesion of protein, bacteria, and Navicula diatoms. More importantly, marine field tests showed the coating could efficiently inhibit biofouling for at least 8 months. This approach paves a new way for the development of environmentally friendly and long-term antifouling coating.

Biomimetic Self-Renewal Polymer Brushes with Protein Resistance Inspired by Fish Skin

Inspired by fish skin, biomimetic self-renewal poly[(ethylene oxide)-co-(ethylene carbonate)] (PEOC) brushes with protein resistance had been prepared via surface-initiated ring-opening polymerization (ROP). The results of hydrolytic degradation indicated that the PEOC brushes could degrade in artificial seawater. Ellipsometry, X-ray photoelectron spectrometry, and contact angle results demonstrated that the PEOC brushes degrade uniformly. By using a quartz crystal microbalance with dissipation, we studied the protein adsorption on the surfaces in artificial seawater at different degradation times. After 24, 48, 96, and 168 h of degradation, the PEOC surfaces showed nearly zero Δf and ΔD for bovine serum albumin, lysozyme, and fibrinogen. More importantly, there was a notably lower density of microorganisms adhered to the surface modified with PEOC compared with that of the surface without PEOC in natural seawater. The current study showed that the PEOC brushes exhibit a self-renewal property with persistent protein resistance and prevent the adhesion of microorganisms. Such a biomimetic polymer had a great potential in marine antibiofouling.

Self-Generating and Self-Renewing Zwitterionic Polymer Surfaces for Marine Anti-Biofouling

Regeneration of antifouling polymer surfaces after contamination or damage is an important issue, especially in complex marine environments. Here, inspired by the self-renewal of silyl acrylate polymers and the protein resistance of zwitterionic polymers, we prepared a novel hydrolysis-induced zwitterionic monomer, tertiary carboxybetaine triisopropylsilyl ester ethyl acrylate (TCBSA), and copolymerized it with methyl methacrylate (MMA). Such a copolymer rapidly self-generates a zwitterionic surface and provides fouling resistance in marine environments. Furthermore, TCBSA was copolymerized with MMA and 2-methylene-1,3-dioxepane (MDO), where MDO causes degradation of the polymers. Our study demonstrates that the degradation of the polymer is controlled, and the degradation rate increases with the external enzyme concentration in the seawater, leading to a self-renewing dynamic surface. Quartz crystal microbalance with dissipation measurements show that the polymeric coating with self-generating zwitterions has excellent protein resistance in seawater. Bioassays demonstrate that the coating can effectively inhibit the adhesion of marine bacteria (Pseudomonas sp.) and diatoms (Navicula incerta). The coating with a self-generating and self-renewing zwitterionic surface is potential to find applications in marine anti-biofouling.

Dynamic surface antifouling: mechanism and systems

Marine biofouling is a global problem today. High efficiency and eco-friendly antifouling systems are in pressing need. In recent years, we have proposed the concept of dynamic surface antifouling (DSA). That is, a continuously changing surface can effectively prevent marine fouling organisms from landing and adhesion. Based on this strategy, we developed coatings with dynamic surfaces by using degradable polymers including polyester-polyurethane, modified polyester and poly(ester-co-acrylate). They exhibit tunable renewability, and excellent antifouling and mechanical performance. Moreover, the polymers can serve as carrier and controlled release systems of antifoulants so that they have long service life. This paper reviews the progress and trends in marine anti-biofouling, and presents the mechanism and systems of DSA.

Antifouling Potentials and Metabolite Profiles of Two Marine-derived Fungal Isolates

Extracts of the culture broths of Aspergillus sydowii SCSIO 00305 and Penicillium chrysogenum SCSIO 00258 exhibited a relatively broad spectrum of antifouling activity against various biofoulers. The main chemical components of their bioactive fractions were analyzed and identified by LC-MS and from literature data. Two bioactive fractions comprised of 1α-methoxyroquefortine C, meleagrin, roquefortine C and isoroquefortine C exhibited more significant anti-barnacle activity than meleagrin in field bioassays, suggesting that the combination of different bioactive compounds could display a stronger antifouling activity than a single compound in the complicated marine ecological environments.

Three-Dimensional Bacterial Behavior near Dynamic Surfaces Formed by Degradable Polymers

Understanding the behavior of bacteria near biodegradable surfaces is critical for the development of biomedical and antibiofouling materials. By using digital holographic microscopy (DHM), we investigated the three-dimensional (3D) behavior of Escherichia coli and Pseudomonas sp. in lipase-containing aquatic environments near dynamic surfaces constructed by biodegradable poly(ε-caprolactone) (PCL)-based polymers in real time. As the enzymatic degradation rate increases, the percentage of near-surface subdiffusive bacteria and consequently, the irreversible adhesion decreases. Atomic force microscopy (AFM) measurements reveal that the adhesion force between bacteria and the surfaces decreases with an increasing degradation rate. In addition, the degradation products elicit a negative chemotactic response in E. coli, further driving them away from the dynamic surfaces through more frequent tumbling motion. Our study clearly demonstrates that bacterial adhesion can be reduced on dynamic surfaces formed by degradable polymers.

Gemini quaternary ammonium salt waterborne biodegradable polyurethanes with antibacterial and biocompatible properties

Novel antibacterial waterborne polyurethanes based on gemini quaternary ammonium salt with good biodegradable and biocompatible properties.

Evaluation of Antimicrobial Efficiency of New Polymers Comprised by Covalently Attached and/or Electrostatically Bound Bacteriostatic Species, Based on Quaternary Ammonium Compounds

In the present work a detailed study of new bacteriostatic copolymers with quaternized ammonium groups introduced in the polymer chain through covalent attachment or electrostatic interaction, was performed. Different copolymers have been considered since beside the active species, the hydrophobic/hydrophilic nature of the co-monomer was also evaluated in the case of covalently attached bacteriostatic groups, aiming at achieving permanent antibacterial activity. Homopolymers with quaternized ammonium/phosphonium groups were also tested for comparison reasons. The antimicrobial activity of the synthesized polymers after 3 and 24 h of exposure at 4 and 22 °C was investigated on cultures of Gram-negative (P. aeruginosa, E. coli) and Gram-positive (S. aureus, E. faecalis) bacteria. It was found that the combination of the hydrophilic monomer acrylic acid (AA), at low contents, with the covalently attached bacteriostatic group vinyl benzyl dimethylhexadecylammonium chloride (VBCHAM) in the copolymer P(AA-co-VBCHAM88), resulted in a high bacteriostatic activity against P. aeruginosa and E. faecalis (6 log reduction in certain cases). Moreover, the combination of covalently attached VBCHAM units with electrostatically bound cetyltrimethylammonium 4-styrene sulfonate (SSAmC₁₆) units in the P(SSAmC₁₆-co-VBCHAMx) copolymers led to efficient antimicrobial materials, especially against Gram-positive bacteria, where a log reduction between 4.9 and 6.2 was verified. These materials remain remarkably efficient even when they are incorporated in polysulfone membranes.

Synthesis and in vivo magnetic resonance imaging evaluation of biocompatible branched copolymer nanocontrast agents

Branched copolymer nanoparticles (D_h =20–35 nm) possessing 1,4,7, 10-tetraazacyclododecane-N,N′,N″,N‴-tetraacetic acid macrocycles within their cores have been synthesized and applied as magnetic resonance imaging (MRI) nanosized contrast agents in vivo. These nanoparticles have been generated from novel functional monomers via reversible addition–fragmentation chain transfer polymerization. The process is very robust and synthetically straightforward. Chelation with gadolinium and preliminary in vivo experiments have demonstrated promising characteristics as MRI contrast agents with prolonged blood retention time, good biocompatibility, and an intravascular distribution. The ability of these nanoparticles to perfuse and passively target tumor cells through the enhanced permeability and retention effect is also demonstrated. These novel highly functional nanoparticle platforms have succinimidyl ester-activated benzoate functionalities within their corona, which make them suitable for future peptide conjugation and subsequent active cell-targeted MRI or the conjugation of fluorophores for bimodal imaging. We have also demonstrated that these branched copolymer nanoparticles are able to noncovalently encapsulate hydrophobic guest molecules, which could allow simultaneous bioimaging and drug delivery.

A novel approach for synthesis of zwitterionic polyurethane coating with protein resistance

We have developed a novel approach to introduce zwitterions into polyurethane for the preparation of antibiofouling coating. First, the thiol-ene click reaction between 2-(dimethylamino)ethyl methacrylate (DMAEMA) and 3-mercapto-1,2-propanediol (TPG) is used to synthesize dihydroxy-terminated DMAEMA (DMA(OH)2) under UV catalysis. The product has been proved by gel permeation chromatography (GPC), Fourier transform infrared spectrum (FT-IR), proton nuclear magnetic resonance ((1)H NMR), and high resolution mass spectrometry (HRMS). DMA(OH)2 is then incorporated into polyurethane as side groups by polyaddition with diisocyanate and further reacts with 1,3-propane sultone to obtain the zwitterionic polyurethanes. The presence of sulfobetaine zwitterions side groups has been demonstrated by FT-IR and X-ray photoelectron spectroscopy (XPS). Thermal analysis indicates that the thermal stability is decreased with the increasing content of zwitterionions. The antibiofouling property of polyurethanes has been investigated by the measurement of adsorption of fibrinogen, bovine serum albumin (BSA), and lysozyme on the polyurethanes surface using quartz crystal microbalance with dissipation (QCM-D). The results show that the polyurethane coatings exhibit effective nonspecific protein resistance at higher content of zwitterionic side groups.

Antifouling potentials of eight deep-sea-derived fungi from the South China Sea

Marine-derived microbial secondary metabolites are promising potential sources of nontoxic antifouling agents. The search for environmentally friendly and low-toxic antifouling components guided us to investigate the antifouling potentials of eight novel fungal isolates from deep-sea sediments of the South China Sea. Sixteen crude ethyl acetate extracts of the eight fungal isolates showed distinct antibacterial activity against three marine bacteria (Loktanella hongkongensis UST950701–009, Micrococcus luteus UST950701–006 and Pseudoalteromonas piscida UST010620–005), or significant antilarval activity against larval settlement of bryozoan Bugula neritina. Furthermore, the extract of Aspergillus westerdijkiae DFFSCS013 displayed strong antifouling activity in a field trial lasting 4 months. By further bioassay-guided isolation, five antifouling alkaloids including brevianamide F, circumdatin F and L, notoamide C, and 5-chlorosclerotiamide were isolated from the extract of A. westerdijkiae DFFSCS013. This is the first report about the antifouling potentials of metabolites of the deep-sea-derived fungi from the South China Sea, and the first stage towards the development of non- or low-toxic antifouling agents from deep-sea-derived fungi.

Degradable polyurethane for marine anti-biofouling

Degradable polyurethane (PU) with copolyester oligomer consisting of ε-caprolactone (CL) and glycolide (GA) as the soft segments has been prepared by a combination of ring-opening polymerization and condensation reaction. Enzymatic and hydrolytic degradation experiments demonstrate that the PU can degrade in seawater. Such a polyurethane exhibit a more rapid degradation in comparison with that with poly(ε-caprolactone) (PCL) soft segments because the introduction of GA can reduce the crystallinity, as revealed by differential scanning calorimetry (DSC) and polarizing optical microscope (POM). Marine field tests show that the degradable polyurethane has good antifouling ability due to its self-renewal property. Besides, such polyurethane can serve as a carrier and controlled release system for an antifoulant, and the incorporation of an antifoulant in the polyurethane can significantly improve the antifouling ability and duration.