Guided differentiation of induced pluripotent stem cells into neuronal lineage in alginate–chitosan–gelatin hydrogels with surface neuron growth factor

Advances in current in vitro models on neurodegenerative diseases

Many neurodegenerative diseases are identified but their causes and cure are far from being well-known. The problem resides in the complexity of the neural tissue and its location which hinders its easy evaluation. Although necessary in the drug discovery process, in vivo animal models need to be reduced and show relevant differences with the human tissues that guide scientists to inquire about other possible options which lead to in vitro models being explored. From organoids to organ-on-a-chips, 3D models are considered the cutting-edge technology in cell culture. Cell choice is a big parameter to take into consideration when planning an in vitro model and cells capable of mimicking both healthy and diseased tissue, such as induced pluripotent stem cells (iPSC), are recognized as good candidates. Hence, we present a critical review of the latest models used to study neurodegenerative disease, how these models have evolved introducing microfluidics platforms, 3D cell cultures, and the use of induced pluripotent cells to better mimic the neural tissue environment in pathological conditions.

Enhanced growth and differentiation of neural stem cells on alginate/collagen/reduced graphene oxide composite hydrogel incorporated with lithium chloride

Introduction

Cell transplantation with hydrogel-based carriers is one of the advanced therapeutics for challenging diseases, such as spinal cord injury. Electrically conductive hydrogel has received much attention for its effect on nerve outgrowth and differentiation. Besides, a load of neuroprotective substances, such as lithium chloride can promote the differentiation properties of the hydrogel.

Methods

In this study, alginate/collagen/reduced graphene oxide hydrogel loaded with lithium chloride (AL/CO/rGO Li+) was prepared as an injectable cell delivery system for neural tissue regeneration. After determining the lithium-ion release profile, an MTT assay was performed to check neural viability. In the next step, real-time PCR was performed to evaluate the expression of cell adhesion and neurogenic markers.

Results

Our results showed that the combination of collagen fibers and rGO with alginates increased cell viability and the gene expression of collagen-binding receptor subunits such as integrin α1, and β1. Further, rGO contributed to the controlled release of lithium-ion hydrogel in terms of its plenty of negatively charged functional groups. The continuous culture of NSCs on AL/CO/rGO Li+ hydrogel increased neurogenic genes' expressions of nestin (5.9 fold), NF200 (36.8 fold), and synaptophysin (13.2 fold), as well as protein expression of NF200 and synaptophysin after about 14 days.

Conclusion

The simultaneous ability of electrical conduction and lithium-ion release of AL/CO/rGO Li+ hydrogel could provide a favorable microenvironment for NSCs by improving their survival, maintaining cell morphology, and expressing the neural marker. It may be potentially used as a therapeutic approach for stem cell transplantation in a spinal cord injury.

Progress and emerging techniques for biomaterial-based derivation of mesenchymal stem cells (MSCs) from pluripotent stem cells (PSCs)

The use of mesenchymal stem cells (MSCs) for clinical purposes has skyrocketed in the past decade. Their multilineage differentiation potentials and immunomodulatory properties have facilitated the discovery of therapies for various illnesses. MSCs can be isolated from infant and adult tissue sources, which means they are easily available. However, this raises concerns because of the heterogeneity among the various MSC sources, which limits their effective use. Variabilities arise from donor- and tissue-specific differences, such as age, sex, and tissue source. Moreover, adult-sourced MSCs have limited proliferation potentials, which hinders their long-term therapeutic efficacy. These limitations of adult MSCs have prompted researchers to develop a new method for generating MSCs. Pluripotent stem cells (PSCs), such as embryonic stem cells and induced PSCs (iPSCs), can differentiate into various types of cells. Herein, a thorough review of the characteristics, functions, and clinical importance of MSCs is presented. The existing sources of MSCs, including adult- and infant-based sources, are compared. The most recent techniques for deriving MSCs from iPSCs, with a focus on biomaterial-assisted methods in both two- and three-dimensional culture systems, are listed and elaborated. Finally, several opportunities to develop improved methods for efficiently producing MSCs with the aim of advancing their various clinical applications are described.

Development of 3D printable graphene oxide based bio-ink for cell support and tissue engineering

Tissue engineered constructs can serve as in vitro models for research and replacement of diseased or damaged tissue. As an emerging technology, 3D bioprinting enables tissue engineering through the ability to arrange biomaterials and cells in pre-ordered structures. Hydrogels, such as alginate (Alg), can be formulated as inks for 3D bioprinting. However, Alg has limited cell affinity and lacks the functional groups needed to promote cell growth. In contrast, graphene oxide (GO) can support numerous cell types and has been purported for use in regeneration of bone, neural and cardiac tissues. Here, GO was incorporated with 2% (w/w) Alg and 3% (w/w) gelatin (Gel) to improve 3D printability for extrusion-based 3D bioprinting at room temperature (RT; 25°C) and provide a 3D cellular support platform. GO was more uniformly distributed in the ink with our developed method over a wide concentration range (0.05%–0.5%, w/w) compared to previously reported GO containing bioink. Cell support was confirmed using adipose tissue derived stem cells (ADSCs) either seeded onto 3D printed GO scaffolds or encapsulated within the GO containing ink before direct 3D printing. Added GO was shown to improve cell-affinity of bioinert biomaterials by providing more bioactive moieties on the scaffold surface. 3D cell-laden or cell-seeded constructs showed improved cell viability compared to pristine (without GO) bio-ink-based scaffolds. Our findings support the application of GO for novel bio-ink formulation, with the potential to incorporate other natural and synthetic materials such as chitosan and cellulose for advanced in situ biosensing, drug-loading and release, and with the potential for electrical stimulation of cells to further augment cell function.

Colloidal systems toward 3D cell culture scaffolds

Three-dimensional porous scaffolds are essential for the development of tissue engineering and regeneration, as biomimetic supports to recreate the microenvironment present in natural tissues. To successfully achieve the growth and development of a specific kind of tissue, porous matrices should be able to influence cell behavior by promoting close cell-cell and cell-matrix interactions. To achieve this goal, the scaffold must fulfil a set of conditions, including ordered interconnected porosity to promote cell diffusion and vascularization, mechanical strength to support the tissue during continuous ingrowth, and biocompatibility to avoid toxicity. Among various building approaches to the construction of porous matrices, selected strategies afford hierarchical scaffolds with such defined properties. The control over porosity, microstructure or morphology, is crucial to the fabrication of high-end, reproducible scaffolds for the target application. In this review, we provide an insight into recent advances toward the colloidal fabrication of hierarchical scaffolds. After identifying the main requirements for scaffolds in biomedical applications, conceptual building processes are introduced. Examples of tissue regeneration applications are provided for different scaffold types, highlighting their versatility and biocompatibility. We finally provide a prospect about the current state of the art and limitations of porous scaffolds, along with challenges that are to be addressed, so these materials consolidate in the fields of tissue engineering and drug delivery.

Blended alginate/collagen hydrogels promote neurogenesis and neuronal maturation

Brain extracellular matrix (ECM) is complex, heterogeneous and often poorly replicated in traditional 2D cell culture systems. The development of more physiologically relevant 3D cell models capable of emulating the native ECM is of paramount importance for the study of human induced pluripotent stem cell (iPSC)-derived neurons. Due to its structural similarity with hyaluronic acid, a primary component of brain ECM, alginate is a potential biomaterial for 3D cell culture systems. However, a lack of cell adhesion motifs within the chemical structure of alginate has limited its application in neural culture systems. This study presents a simple and accessible method of incorporating collagen fibrils into an alginate hydrogel by physical mixing and controlled gelation under physiological conditions and tests the hypothesis that such a substrate could influence the behaviour of human neurons in 3D culture. Regulation of the gelation process enabled the penetration of collagen fibrils throughout the hydrogel structure as demonstrated by transmission electron microscopy. Encapsulated human iPSC-derived neurons adhered to the blended hydrogel as evidenced by the increased expression of α1, α2 and β1 integrins. Furthermore, immunofluorescence microscopy revealed that encapsulated neurons formed complex neural networks and matured into branched neurons expressing synaptophysin, a key protein involved in neurotransmission, along the neurites. Mechanical tuning of the hydrogel stiffness by modulation of the alginate ionic crosslinker concentration also influenced neuron-specific gene expression. In conclusion, we have shown that by tuning the physicochemical properties of the alginate/collagen blend it is possible to create different ECM-like microenvironments where complex mechanisms underpinning the growth and development of human neurons can be simulated and systematically investigated.

•

Alginate and collagen are blended to create a bespoke hydrogel that mimics aspects of brain ECM.

•

Encapsulated human pluripotent stem cell derived neurons adhere to the hydrogel matrix and form 3D neural networks.

•

Neuronal differentiation and maturation is promoted within the hydrogel matrix.

•

Mechanical properties of the hydrogel can be easily tuned to optimise neurogenesis.

•

The hydrogel presents a platform for studying neuronal function and dysfunction in health and disease.

Biomaterial aided differentiation and maturation of induced pluripotent stem cells

Engineering/reprogramming differentiated adult somatic cells to gain the ability to differentiate into any type of cell lineage are called as induced pluripotent stem cells (iPSCs). Offering unlimited self-renewal and differentiation potential, these iPSC are aspired to meet the growing demands in the field of regenerative medicine, tissue engineering, disease modeling, nanotechnology, and drug discovery. Biomaterial fabrication with the rapid evolution of technology increased their versatility and utility in regenerative medicine and tissue engineering, revolutionizing the stem cell biology research with the property to guide the process of proliferation, differentiation, and morphogenesis. Combining traditional culture platforms of iPSC with biomaterials aids to overcome the limitations associated with derivation, proliferation, and maturation, thereby could improve the clinical translation of iPSC. The present review discusses in brief about the reprogramming techniques for the derivation iPSC and details on several biomaterial guided differentiation of iPSC to different cell types with specific relevance to tissue engineering/regenerative medicine.

The role of nanomaterials in cell delivery systems

In more than one decade, cell transplantation has created an important strategy to treat a wide variety of diseases characterized by tissue and cell dysfunctions. In this course of action, cell delivery to target site has been always one of the most important constraints and complications, as only a small proportion of the cells are housed in the target sites. Nanotechnology and nanoscale biomaterials have been helpful for cell transplantation in various fields of regenerative medicine including diagnosis, delivery systems for the cell, drug or gene, and cells protection system. In this study, the basic concepts and recently studied aspects of cell delivery systems based on nanoscale biomaterials for transplantation and clinical applications are highlighted. Nanomaterials may be used in combination with cell therapy to control the release of drugs or special factors of engineered cells after transplantation.

Development of a porous 3D graphene-PDMS scaffold for improved osseointegration

Osseointegration in orthopedic surgery plays an important role for bone implantation success. Traditional treatment of implant surface aimed at improved osseointegration has limited capability for its poor performance in supporting cell growth and proliferation. Polydimethylsiloxane (PDMS) is a widely used silicon-based organic polymer material with properties that are useful in cosmetics, domestic applications and mechanical engineering. In addition, the biocompatibility of PDMS, in part due to the high solubility of oxygen, makes it an ideal material for cell-based implants. Notwithstanding its potential, a property that can inhibit PDMS bioactivity is the high hydrophobicity, limiting its use to date in tissue engineering. Here, we describe an efficient approach to produce porous, durable and cytocompatible PDMS-based 3D structures, coated with reduced graphene oxide (RGO). The RGO/PDMS scaffold has good mechanical strength and with pore sizes ranging from 10 to 600μm. Importantly, the scaffold is able to support growth and differentiation of human adipose stem cells (ADSCs) to an osteogenic cell lineage, indicative of its potential as a transition structure of an osseointegrated implant.

Contribution of polymeric materials to progress in xenotransplantation of microencapsulated cells: a review

Cell microencapsulation and subsequent transplantation of the microencapsulated cells require multidisciplinary approaches. Physical, chemical, biological, engineering, and medical expertise has to be combined. Several natural and synthetic polymeric materials and different technologies have been reported for the preparation of hydrogels, which are suitable to protect cells by microencapsulation. However, owing to the frequent lack of adequate characterization of the hydrogels and their components as well as incomplete description of the technology, many results of in vitro and in vivo studies appear contradictory or cannot reliably be reproduced. This review addresses the state of the art in cell microencapsulation with special focus on microencapsulated cells intended for xenotransplantation cell therapies. The choice of materials, the design and fabrication of the microspheres, as well as the conditions to be met during the cell microencapsulation process, are summarized and discussed prior to presenting research results of in vitro and in vivo studies. Overall, this review will serve to sensitize medically educated specialists for materials and technological aspects of cell microencapsulation.

Improving the Growth Rate of Human Adipose-Derived Mesenchymal Stem Cells in Alginate/Gelatin Versus Alginate Hydrogels

BACKGROUND

Expansion and differentiation of stem cells relies on the soluble materials as well as the physical conditions of their microenvironment. Several methods have been studied in attempt to enhance the growth and differentiation rates of different adult stem cells extracted from different sources.

OBJECTIVES

The purpose was to improve the three-dimensional (3D) culture condition of the semi-permeable polymeric beads for encapsulation of the human adipose-derived mesenchymal stem cells (hADSCs) by modifying the ratio of the alginate-gelatin composition.

MATERIALS AND METHODS

Following isolation and characterization of hADSCs by flow cytometry and their functional differentiation, encapsulation in the alginate and alginate/gelatin compositions were performed. Moreover, the stability, swelling, size frequency, growth kinetics, and cytotoxicity of the beads were measured to meet proper condition in the designed experimental and control culture conditions. Finally, the growth rates of the cells in different experimental groups and control were measured and analyzed statistically.

RESULTS

Viability decreased in 2 and 3 percent alginate once compared to 1% alginate in beads (p≤0.05). Moreover swelling of the beads in the alginate/gelatin compositions (50:50 and 70:30) were higher than the pure alginate beads (p≤0.05). Finally, the cell growth rate in alginate/gelatin (50:50) beads was significantly higher than alginate and alginate/gelatin (70:30) beads (p≤0.05).

CONCLUSIONS

These findings suggested for the first time that the composite of alginate/gelatin beads with the ratio of 50:50 might provide a suitable culture condition for the encapsulation and in vitro expansion of the hADSCs.

Prospects of chitosan-based scaffolds for growth factor release in tissue engineering

Tissue engineering is concerned about the rejuvenation and restoration of diseased and damages tissues/organs using man-made scaffolds that mimic the native environment of the cells. In recent years, a variety of biocompatible and biodegradable natural materials is employed for the fabrication of such scaffolds. Of these natural materials, chitosan is the most preferred one as it imitates the extracellular matrix (ECM) of the cells. Moreover, chitosan-based materials are pro-angiogenic and have antibacterial activity. These materials can be easily fabricated into the desired shape of the scaffolds that are suitable for tissue support and regeneration. Growth factors are small proteins/peptides that support and enhance the growth and differentiation of cells into a specific lineage. It has been observed that scaffolds capable of delivering growth factor promote tissue repair and regeneration at a faster rate when compared to scaffolds without growth factor. The present review focuses on the recent developments on chitosan-based scaffolds for the delivery of growth factors thereby improving and enhancing tissue regeneration.

Probing neural cell behaviors through micro-/nano-patterned chitosan substrates

In this study, we describe the development of surface-modified chitosan substrates to examine topographically related Neuro-2a cell behaviors. Different functional groups can be modified on chitosan surfaces to probe Neuro-2a cell morphology. To prepare chitosan substrates with micro/nano-scaled features, we demonstrated an easy-to-handle method that combined photolithography, inductively coupled plasma reactive ion etching, Ag nanoparticle-assisted etching, and solution casting. The results show that Neuro-2a cells preferred to adhere to a flat chitosan surface rather than a nanotextured chitosan surface as evidenced by greater immobilization and differentiation, suggesting that surface topography is crucial for neural patterning. In addition, we developed chitosan substrates with different geometric patterns and flat region depth; this allowed us to re-arrange or re-pattern Neuro-2a cell colonies at desired locations. We found that a polarity-induced micropattern provided the most suitable surface pattern for promoting neural network formation on a chitosan substrate. The cellular polarity of single Neuro-2a cell spreading correlated to a diamond-like geometry and neurite outgrowth was induced from the corners toward the grooves of the structures. This study provide greater insight into neurobiology, including neurotransmitter screening, electrophysiological stimulation platforms, and biomedical engineering.

Natural and Synthetic Materials for Self-Renewal, Long-Term Maintenance, and Differentiation of Induced Pluripotent Stem Cells

Induced pluripotent stem cells (iPSCs) have attracted considerable attention from the public, clinicians, and scientists since their discovery in 2006, and raised huge expectations for regenerative medicine. One of the distinctive features of iPSCs is their propensity to differentiate into the cells of three germ lines in vitro and in vivo. The human iPSCs can be used to study the mechanisms underlying a disease and to monitor the disease progression, for testing drugs in vitro, and for cell therapy, avoiding many ethical and immunologic concerns. This technology offers the potential to take an individual approach to each patient and allows a more accurate diagnosis and specific treatment. However, there are several obstacles that impede the use of iPSCs. The derivation of fully reprogrammed iPSCs is expensive, time-consuming, and demands meticulous attention to many details. The use of biomaterials could increase the efficacy and safety while decreasing the cost of tissue engineering. The choice of a substrate utilized for iPSC culture is also important because cell-substrate contacts influence cellular behavior such as self-renewal, expansion, and differentiation. This Progress Report aims to summarize the advantages and drawbacks of natural and synthetic biomaterials, and to evaluate their role for maintenance and differentiation of iPSCs.

Stem cell delivery systems inspired by tissue-specific niches

Since stem cells have the capacity to differentiate into a variety of cell types, stem cell delivery systems (SCDSs) can be effective therapeutic strategies for a multitude of diseases and disorders. For stem cell-based therapy, stem cells are introduced directly (or peripherally) into a target tissue via different delivery systems. Despite initial promising results obtained from preclinical studies, a number of technical hurdles must be overcome for ultimate clinical utility of stem cells. A key aspect of SCDSs is how to create local environments, called stem cell niches, for improvement of survival and engraftment as well as the fate of transplanted stem cells. The stem cell niches encompassing a wide range of biochemical, biophysical, and biomechanical cues play a guidance role to modulate stem cell behaviors such as adhesion, proliferation, and differentiation. Recent studies have tried to decipher the complex interplay between stem cells and niches, and thereafter to engineer SCDS, mimicking dynamic stem cell niches encompassing a wide range of biochemical, biophysical, and biomechanical cues. Here, we discuss the biological role of stem cell niches and highlight recent progress in SCDS to mimic stem cell niches, particularly focusing on important biomaterial properties for modulating stem cell fate.

Effects of Salvia miltiorrhiza on neural differentiation of induced pluripotent stem cells

ETHNOPHARMACOLOGICAL RELEVANCE

Salvia miltiorrhiza, a well-known traditional Chinese medicine, is commonly used to treat some neurological diseases because of its anti-oxidative, anti-inflammatory and anti-apoptotic properties. We investigate whether Salvia miltiorrhiza can improve the differentiation of induced pluripotent stem cells (iPSCs) into neurons in vitro, and promote iPSCs-derived neural stem cells survival, integrate, and differentiation after their transplantation to the ischemic brain tissues.

MATERIALS AND METHODS

Induced pluripotent stem cells were used to differentiate into neural stem cells, and further into neurons in induction medium with various concentrations of Salvia miltiorrhiza. The effects were assessed by immunofluorescence staining, quantitative reverse transcription-polymerase chain reaction (qRT-PCR) and Western blotting. iPSC-derived neural stem cells were transplanted into the brains of rats with middle cerebral artery occlusion, immunofluorescence staining was used to evaluate survival, integrate, and differentiation of grafted cells, the functional recovery of the animals was tested by the Longa scores and spontaneous motor activity.

RESULTS

Salvia miltiorrhiza (5μg/ml) significantly increased the gene and protein expression of Nestin compared with that in other groups. Microtubule-associated protein 2 (MAP2) expression in induction medium with 5μg/ml Salvia miltiorrhiza was significantly higher than that in the control group. After cells transplantation into the ischemic brain, more grafted MAP2(+) cells were found in Salvia miltiorrhiza-treated rats than others at 7 days. Salvia miltiorrhiza-treated rats showed the most remarkable functional recovery at 7 and 14 days.

CONCLUSION

Salvia miltiorrhiza induces differentiation of induced pluripotent stem cells to differentiate into neurons efficiently. The plant provides neuroprotection to implanted cells and improves functional recovery after their transplantation to the ischemic brain tissues.

Polybutylcyanoacrylate nanoparticles for delivering hormone response element-conjugated neurotrophin-3 to the brain of intracerebral hemorrhagic rats

Hypertensive intracerebral hemorrhage (ICH) is a rapidly evolutional pathology, inducing necrotic cell death followed by apoptosis, and alters gene expression levels in surrounding tissue of an injured brain. For ICH therapy by controlled gene release, the development of intravenously administrable delivery vectors to promote the penetration across the blood-brain barrier (BBB) is a critical challenge. To enhance transfer efficiency of genetic materials under hypoxic conditions, polybutylcyanoacrylate (PBCA) nanoparticles (NPs) were used to mediate the intracellular transport of plasmid neurotrophin-3 (NT-3) containing hormone response element (HRE) with a cytomegalovirus (cmv) promoter and to differentiate induced pluripotent stem cells (iPSCs). The differentiation ability of iPSCs to neurons was justified by various immunological stains for protein fluorescence. The effect of PBCA NP/cmvNT-3-HRE complexes on treating ICH rats was studied by immunostaining, western blotting and Nissl staining. We found that the treatments with PBCA NP/cmvNT-3-HRE complexes increased the capability of differentiating iPSCs to express NT-3, TrkC and MAP-2. Moreover, PBCA NPs could protect cmvNT-3-HRE against degradation with EcoRI/PstI and DNase I in vitro and raise the delivery across the BBB in vivo. The administration of PBCA NP/cmvNT-3-HRE complexes increased the expression of NT-3, inhibited the expression of apoptosis-inducing factor, cleaved caspase-3 and DNA fragmentation, and reduced the cell death rate after ICH in vivo. PBCA NPs are demonstrated as an appropriate delivery system for carrying cmvNT-3-HRE to the brain for ICH therapy.

Chitosan stabilizes platelet growth factors and modulates stem cell differentiation toward tissue regeneration

The idea of using chitosan as a functional delivery aid to support simultaneously PRP, stem cells and growth factors (GF) is associated with the intention to use morphogenic biomaterials to modulate the natural healing sequence in bone and other tissues. For example, chitosan-chondroitin sulfate loaded with platelet lysate was included in a poly(D,L-lactate) foam that was then seeded with human adipose-derived stem cells and cultured in vitro under osteogenic stimulus: the platelet lysate provided to the bone tissue the most suitable assortment of GF which induces the osteogenic differentiation of the mesenchymal stem cells. PDGF, FGF, IGF and TGF-β were protagonists in the repair of callus fractures. The release of GF from the composites of chitosan-PRP and either nano-hydroxyapatite or tricalcium phosphate was highly beneficial for enhancing MSC proliferation and differentiation, thus qualifying chitosan as an excellent vehicle. A number of biochemical characteristics of chitosan exert synergism with stem cells in the regeneration of soft tissues.