Degradation of synthetic dye, Rhodamine B to environmentally non-toxic products using microalgae

Ecofriendly Approach on the Removal of Reactive Orange 107 from Aqueous Solutions Using Cladophora Species as a Novel Biosorbent

The efficiency of Cladophora species for the removal of Reactive Orange 107 (RO107) from the aqueous solution was evaluated through batch adsorption studies by optimising various process parameters such as pH (3-8), dye concentration (100-500 mg/l), biosorbent concentration (100-500 mg/l), temperature (25-45 °C) and contact time (12-108 h). The results revealed that the optimum conditions for RO107 decolourisation (87%) was found on 72 h of incubation with 100 mg/l dye concentration amended with 200 mg/l biosorbent at pH 6 at 25 °C. The mechanism of dye adsorption was evaluated using isotherms, kinetics and thermodynamic models. The experimental data fitted well with Langmuir isotherm and pseudo-second-order kinetic models. Thermodynamic studies revealed that the adsorption process was endothermic, spontaneous and feasible in nature. Recovery of RO107 from the Cladophora sp. was maximum when 0.1 M HNO3 was used as an eluent. UV-Visible, FT-IR and SEM analyses reveal the interaction between the biosorbent-adsorbate and confirm the process of decolourisation by Cladophora sp. In order to evaluate the nature of the untreated and treated dye solutions, toxicological studies were conducted and the results revealed that the treated dye solution was non- toxic as compared with untreated dye solution. The results of the docking study proved that there was a substantial binding energy between RO107 and the protein (Cytochrome C6) of Cladophora sp. Hence, Cladophora sp. proves to be a promising biosorbent to decolourise RO107 and its potential can be explored in the textile sectors.

Contamination of textile dyes in aquatic environment: Adverse impacts on aquatic ecosystem and human health, and its management using bioremediation

Textile dyes are the burgeoning environmental contaminants across the world. They might be directly disposed of from textile industries into the aquatic bodies, which act as the direct source for the entire ecosystem, ultimately impacting the human beings. Hence, it is essential to dissect the potential adverse outcomes of textile dye exposure on aquatic plants, aquatic fauna, terrestrial entities, and humans. Analysis of appropriate literature has revealed that textile dye effluents could affect the aquatic biota by disrupting their growth and reproduction. Various aquatic organisms are targeted by textile dye effluents. In such organisms, these chemicals affect their development, behavior, and induce oxidative stress. General populations of humans are exposed to textile dyes via the food chain and drinking contaminated water. In humans, textile dyes are biotransformed into electrophilic intermediates and aromatic amines by the enzymes of the cytochrome family. Textile dyes and their biotransformed products form the DNA and protein adducts at sub-cellular moiety. Moreover, these compounds catalyze the production of free radicals and oxidative stress, and trigger the apoptotic cascades to produce lesions in multiple organs. In addition, textile dyes modulate epigenetic factors like DNA methyltransferase and histone deacetylase to promote carcinogenesis. Several bioremediation approaches involving algae, fungi, bacteria, biomembrane filtration techniques, etc., have been tested and some other hybrid systems are currently under investigation to treat textile dye effluents. However, many such approaches are at the trial stage and require further research to develop more efficient, cost-effective, and easy-to-handle techniques.

Molecularly imprinted polymer-coated hybrid optical waveguides for sub-aM fluorescence sensing

The sensitivity of fluorescent sensors is crucial for their applications. In this study, we propose a molecularly imprinted polymer (MIP)-coated optical fibre-hybrid waveguide-fibre sensing structure for ultrasensitive fluorescence detection. In such a structure, the MIP coated-hybrid waveguide acts as a sensing probe, and the two co-axially connected optical fibres act as a highly efficient probing light launcher and a fluorescence signal collector, respectively. For the dual-layered waveguide sensing probe, the inner hybrid waveguide core was fabricated using a hollow quartz nanoparticle-hybridized polymer composite with a low refractive index, and the outer MIP coating layer possesses a high refractive index. Simulations showed that this dual-layer configuration can cause light propagation from the waveguide core to the MIP sensing layer with an efficiency of 98%, which is essential for detection. To validate this concept, we adopted a popular fluorescent dye, rhodamine B, to evaluate the sensing characteristics of the proposed system. We achieved an extremely low limit of detection of approximately 1.3 × 10-19 g ml-1 (approximately 0.27 aM).

Evaluation of Cladophora and Chlamydomonas microalgae for environmental sustainability: A comparative study of antimicrobial and photocatalytic dye degradation

The present study emphasizes exploring the potential of bioactive compounds such as polysaccharides, protein, pigments, antioxidants, and vitamins extracted from two microalgae species, Cladophora and Chlamydomonas. The extraction process was optimized for different periods, and the extracted bioactive compounds were characterized. These bioactive compounds showed significant antibacterial activity against gram-positive and gram-negative bacteria. Notably, Cladophora species exhibited a higher zone of inhibition than Chlamydomonas species against both gram-positive and gram-negative bacterial strains. Moreover, the photocatalytic activity of these bioactive compounds was investigated for the degradation of methylene blue and crystal violet dyes under different light conditions. The results demonstrated that Cladophora species exhibited superior photocatalytic activity under natural sunlight, UV light, and visible light sources compared to Chlamydomonas species. Moreover, Cladophora species achieved the highest dye degradation efficiencies of 78% and 72% for methylene blue and crystal violet, respectively, within 150 min compared to UV light and visible light sources.

An insight on pollutant removal mechanisms in phycoremediation of textile wastewater

Pollutants, including dyes and heavy metals from textile industrial discharge, adversely affect the surface and groundwater resources, and pose a severe risk to the living organisms in the ecosystem. Phycoremediation of wastewater is now an emerging trend, as it is colossally available, inexpensive, eco-friendly, and has many other benefits, with high removal efficiency for undesirable substances, when compared to conventional treatment methods. Algae have a good binding affinity toward nutrients and toxic compounds because of various functional groups on its cell surface by following the mechanisms such as biosorption, bioaccumulation, or alternate biodegradation pathway. Algae-based treatments generate bioenergy feedstock as sludge, mitigate CO2, synthesize high-value-added products, and release oxygenated effluent. Algae when converted into activated carbon also show good potential against contaminants, because of its higher binding efficiency and surface area. This review provides an extensive analysis of different mechanisms involved in removal of undesirable and hazardous substances from textile wastewater using algae as green technology. It could be founded that both biosorption and biodegradation mechanisms were responsible for the removal of dye, organic, and inorganic pollutants. But for the heavy metals removal, biosorption results in higher removal efficiency. Overall, phycoremediation is a convenient technique for substantial conserving of energy demand, reducing greenhouse gas emissions, and removing pollutants.

Effects of light quality on microalgae cultivation: bibliometric analysis, mini-review, and regulation approaches

The ever-increasing concern for energy shortages and greenhouse effect has triggered the development of sustainable green technologies. Microalgae have received more attention due to the characteristics of biofuel production and CO2 fixation. From the perspective of autotrophic growth, the optimization of light quality has the potential to promote biomass production and bio-component accumulation in microalgae at low cost. In this study, bibliometric analysis was used to describe the basic features, identify the hotspots, and predict future trends of the research related to the light quality on microalgae cultivation. In addition, a mini-review referring to regulation methods of light quality was provided to optimize the framework of research. Results demonstrated that China has the greatest interest in this area. The destination of most research was to obtain biofuels and high-value-added products. Both blue and red lights were identified as the crucial spectrums for microalgae cultivation. However, sunlight is the most affordable light resource, which could not be fully utilized by microalgae through the photosynthetic process. Hence, some regulation approaches (e.g., dyes, plasmonic scattering, and carbon-based quantum dots) are proposed to increase the proportion of beneficial spectrum for enhancement of photosynthetic efficiency. In summary, this review introduces state-of-the-art research and provides theoretical guidance for light quality optimization in microalgae cultivation to obtain more benefits.

Microalgal-induced remediation of wastewaters loaded with organic and inorganic pollutants: An overview

The recent surge in industrialization has intensified the accumulation of various types of organic and inorganic pollutants due to the illegal dumping of partially and/or untreated wastewater effluents in the environment. The pollutants emitted by several industries pose serious risk to the environment, animals and human beings. Management and diminution of these hazardous organic pollutants have become an incipient research interest. Traditional physiochemical methods are energy intensive and produce secondary pollutants. So, bioremediation via microalgae has appeared to be an eco-friendly and sustainable technique to curb the adverse effects of organic and inorganic contaminants because microalgae can degrade complex organic compounds and convert them into simpler and non-toxic substances without the release of secondary pollutants. Even some of the organic pollutants can be exploited by microalgae as a source of carbon in mixotrophic cultivation. Literature survey has revealed that use of the latest modification techniques for microalgae such as immobilization (on alginate, carrageena and agar), pigment-extraction, and pretreatment (with acids) have enhaced their bioremedial potential. Moreover, microalgal components i.e., biopolymers and extracellular polymeric substances (EPS) can potentially be exploited in the biosorption of pollutants. Though bioremediation of wastewaters by microalgae is quite well-studied realm but some aspects like structural and functional responses of microalgae toward pollutant derivatives/by-products (formed during biodegradation), use of genetic engineering to improve the tolerance of microalgae against higher concentrations of polluatans, and harvesting cost reduction, and monitoring of parameters at large-scale still need more focus. This review discusses the accumulation of different types of pollutants into the environment through various sources and the mechanisms used by microalgae to degrade commonly occurring organic and inorganic pollutants.

Advancement in algal bioremediation for organic, inorganic, and emerging pollutants

Rapidly changing bioremediation prospects are key drive to develop sustainable options that can offer extra benefits rather than only environmental remediation. Algal remediating is gaining utmost attention due to its mesmerising sustainable features, removing odour and toxicity, co-remediating numerous common and emerging inorganic and organic pollutants from gaseous and aqueous environments, and yielding biomass for a range of valuable products refining. Moreover, it also improves carbon footprint via carbon-capturing offers a better option than any other non-algal process for several high CO₂-emitting industries. Bio-uptake, bioadsorption, photodegradation, and biodegradation are the main mechanisms to remediate a range of common and emerging pollutants by various algae species. Bioadsorption was a dominant remediation mechanism among others implicating surface properties of pollutants and algal cell walls. Photodegradable pollutants were photodegraded by microalgae by adsorbing photons on the surface and intracellularly via stepwise photodissociation and breakdown. Biodegradation involves the transportation of selective pollutants intracellularly, and enzymes help to convert them into simpler non-toxic forms. Robust models are from the green microalgae group and are dominated by Chlorella species. This article compiles the advancements in microalgae-assisted pollutants remediation and value-addition under sustainable biorefinery prospects. Moreover, filling the knowledge gaps, and recommendations for developing an effective platform for emerging pollutants remediation and realization of commercial-scale algal bioremediation.

Microalgae-based wastewater treatment: Mechanisms, challenges, recent advances, and future prospects

The rapid expansion of both the global economy and the human population has led to a shortage of water resources suitable for direct human consumption. As a result, water remediation will inexorably become the primary focus on a global scale. Microalgae can be grown in various types of wastewaters (WW). They have a high potential to remove contaminants from the effluents of industries and urban areas. This review focuses on recent advances on WW remediation through microalgae cultivation. Attention has already been paid to microalgae-based wastewater treatment (WWT) due to its low energy requirements, the strong ability of microalgae to thrive under diverse environmental conditions, and the potential to transform WW nutrients into high-value compounds. It turned out that microalgae-based WWT is an economical and sustainable solution. Moreover, different types of toxins are removed by microalgae through biosorption, bioaccumulation, and biodegradation processes. Examples are toxins from agricultural runoffs and textile and pharmaceutical industrial effluents. Microalgae have the potential to mitigate carbon dioxide and make use of the micronutrients that are present in the effluents. This review paper highlights the application of microalgae in WW remediation and the remediation of diverse types of pollutants commonly present in WW through different mechanisms, simultaneous resource recovery, and efficient microalgae-based co-culturing systems along with bottlenecks and prospects.

Biodegradation of textile dye Rhodamine-B by Brevundimonas diminuta and screening of their breakdown metabolites

The carcinogenic Rhodamine-B dye is recalcitrant which could cause serious hazards to human beings. Degradation with the application of unique bacterial strain is a sustainable technique. The bioremediation technique showed great potential to degrade a variety of recalcitrant pollutants like dyes. In this study, Brevundimonas diminuta, was selected for the breakdown of toxic textile dye Rhodamine-B. This bacterium showed 90-95% of degradation at the optimum conditions like 10 mg L^-1 of concentration of dye, pH 7 and temperature of 30 °C. Further UV-Visible spectrophotometry, FT-IR spectral scan, GC-MS analysis depicted the breakdown products like Methyl 18-fluoro-octadec-9-enoate, Methyl 18-fluoro-octadec-9-enoate and d-Homo-24-nor-17-oxachola-20,22-diene-3,16-dione,7-(acetyloxy)-1, 23 tri-epoxy-4,4,8-trimethyl. The degradation was confirmed by the changes in the functional groups, change in molecular weight and charge to-mass ratio. These results suggested that this strain is a deserving organism for the degradation of dye compounds.

Eco-toxicological effect of a commercial dye Rhodamine B on freshwater microalgae Chlorella vulgaris

In this study, the acute toxicity effects of a fluorescent xanthene dye, Rhodamine B (RhB), widely used in textile, paper, and leather industries was investigated on a freshwater microalgae Chlorella vulgaris. The acute toxicity of RhB on C. vulgaris was determined by examining the growth, cell morphology, pigment production, protein content, and the activities of oxidative stress enzymes. Based on the results of the toxicity study of 24-96 h, the median inhibitory concentration (IC₅₀) values ranged from 69.94 to 31.29 mg L^-1. The growth of C. vulgaris was conspicuously inhibited by RhB exposure, and the cell surfaces appeared to be seriously shrunk in SEM analysis. The growth of C. vulgaris was hindered after exposure to graded concentrations (10-50 mg L^-1) of RhB. A significant reduction in growth rate, pigment synthesis (chlorophyll a, chlorophyll b, and carotenoid), and protein content was recorded in a dose-dependent manner. After 96 h exposure of C. vulgaris to 50 mg L^-1 RhB, chlorophyll a, chlorophyll b, carotenoids, and protein contents were reduced by 71.59, 74.90, 65.84, and 74.20%, respectively. The activities of the antioxidant enzymes peroxidase (POD), and catalase (CAT) also increased markedly in the presence of RhB. A notable effect was observed on oxidative enzymes catalase and peroxidase, indicating that oxidative stress may be the primary factor in the inhibition of growth and pigment synthesis. Consequently, the experimental acute toxicity data were compared to the QSAR prediction made by the ECOSAR programme. Results showed that the experimental acute toxicity values were 67.74-fold lower than the ECOSAR predicted values. The study provides convincing evidence for the metabolic disruption in the ubiquitous microalgae C. vulgaris due to the RhB dye toxicity.

Sustainable treatment of dye wastewater by recycling microalgal and diatom biogenic materials: Biorefinery perspectives

Discharge of untreated or partially treated toxic dyes containing wastewater from textile industries into water streams is hazardous for environment. The use of heavy metal(s) rich dyes, which are chemically active in azo and sulfur content(s) has been tremendously increasing in last two decades. Conventional physical and chemical treatment processes help to eliminate the dyes from textile wastewater but generates the secondary pollutants which create an additional environmental problem. Microalgae especially the diatoms are promising candidate for dye remediation from textile wastewater. Nanoporous diatoms frustules doped with nanocomposites increase the wastewater remediation efficiency due to their adsorption properties. On the other hand, microalgae with photosynthetic microbial fuel cell have shown significant results in being efficient, cost effective and suitable for large scale phycoremediation. This integrated system has also capability to enhance lipid and carotenoids biosynthesis in microalgae while simultaneously generating the bioelectricity. The present review highlights the textile industry wastewater treatment by live and dead diatoms as well as microalgae such as Chlorella, Scenedesmus, Desmodesmus sp. etc. This review engrosses applicability of diatoms and microalgae as an alternative way of conventional dye removal techniques with techno-economic aspects.

Molecularly Imprinted Polymer-Coated Optical Waveguide for Attogram Sensing

Ultrahigh sensitivity and selectivity are the ultimate goals of sensor development. For such purposes, we propose a sensing platform in which an optical fiber-waveguide-fiber (OFWF) structure is integrated with a molecularly imprinted polymer (MIP). The OFWF works as a highly efficient probe light launcher and signal light collector, and the MIP layer acts as a highly selective and sensitive sensing interface. In the MIP design, a high-molecular refractive index monomer (2-phenylphenoxyethyl acrylate) was copolymerized with a MIP functional monomer (acrylic acid). The resulting high-refractive index MIP layers could effectively extract the probe light from the waveguide and send it to the MIP sensing interface. Moreover, a highly elastic cross-linker (poly(ethylene glycol) 600 diacrylate) was employed to increase the MIP mesh size, which could effectively increase the penetrability of the analyte. Rhodamine B (Rh B) is widely used in the textile industry, and its contamination may lead to serious public health problems. As a proof of concept, the Rh B chromophore was used as a molecular template, and the thin MIP layer was cured on the waveguide surface by utilizing the evanescent wave of the 405 nm propagating light in the waveguide. The MIP-OFWF sensing platform afforded highly selective monitoring of the absorption spectra of the components in a mixture solution of Rh B and methyl blue. It also afforded an extremely low detection limit of approximately 6.5 × 10^-17 g/mL, with an absolute mass of 20-30 ag.

Enhanced microalgal toxicity due to polystyrene nanoplastics and cadmium co-exposure: From the perspective of physiological and metabolomic profiles

As important emerging contaminants, nanoplastics can act as vectors for other environmental pollutants, resulting in their migration throughout ecosystems and altering their toxicity. In this study, the fluorescent dye label aggravated the toxicity of polystyrene (PS) nanoplastics (100 nm diameter particles) to microalgae Euglena gracilis. Therefore, the toxicity of non-fluorescent labelled PS alone and in combination with divalent cadmium (Cd²⁺) on Euglena gracilis in the environmentally relevant concentrations was investigated. Results revealed that co-exposure to 50 μg/L (1.1 × 10¹⁰ particles/L) PS and 50 μg/L Cd²⁺ resulted in synergistic effects, significantly inhibiting microalgal growth by 28.76%. Superoxide dismutase, peroxidase and extracellular polymeric substances were distinctly enhanced in co-exposure treatments compared to the control, indicating that cellular antioxidant defense responses were activated. LC-MS-based metabolomic analysis suggested that PS and Cd²⁺ exposure alone or in combination induced significant disruption to carbohydrate and purine metabolism-related pathways, as compared to controls. As part of the PS and Cd²⁺ stress response, differential metabolites involved in lipid metabolism and amino acid metabolism provide antioxidants and cell membrane protective molecules. Overall, this combined physiological and metabolomic analysis approach provides a better understanding of the potential risks posed by nanoplastics and heavy metal pollution in aquatic ecosystems.

Pristine and engineered biochar for the removal of contaminants co-existing in several types of industrial wastewaters: A critical review

Biochar has been widely studied as an adsorbent for the removal of contaminants from wastewater due to its unique characteristics, such as having a large surface area, well-distributed pores and high abundance of surface functional groups. Critical review of the literature was performed to understand the state of research in utilizing biochars for industrial wastewater remediation with emphasis on pollutants that co-exist in wastewater from several industrial activities, such as textile, pharmaceutical and mining industries. Such pollutants include organic (such as synthetic dyes, phenolic compounds) and inorganic contaminants (such as cadmium, lead). Multiple correspondence analyses suggest that through batch equilibrium, columns or constructed wetlands, researchers have used mechanistic modelling of isotherms, kinetics, and thermodynamics to evaluate contaminant removal in either synthetic or real industrial wastewaters. The removal of organic and inorganic contaminants in wastewater by biochar follows several mechanisms: precipitation, surface complexation, ion exchange, cation-π interaction, and electrostatic attraction. Biochar production and modifications promote good adsorption capacity for those pollutants because biochar properties stemming from production were linked to specific adsorption mechanisms, such as hydrophobic and electrostatic interactions. For instance, adsorption capacity of malachite green ranged from 30.2 to 4066.9 mg g^-1 depending on feedstock type, pyrolysis temperature, and chemical modifications. Pyrolyzing biomass at above 500 °C might improve biochar quality to target co-existing pollutants. Treating biochars with acids can also improve pollutant removal, except that the contribution of precipitation is reduced for potentially toxic elements. Studies on artificial intelligence and machine learning are still in their infancy in wastewater remediation with biochars. Meanwhile, a framework for integrating artificial intelligence and machine learning into biochar wastewater remediation systems is proposed. The reutilization and disposal of spent biochar and the contaminant release from spent biochar are important areas that need to be further studied.

Selenium nanoparticles with photocatalytic properties synthesized by residual activated sludge

The treatment and disposal of residual activated sludge is a worldwide problem and the research on its reuse is still only in the earliest stages. Selenite is a toxic pollutant, while selenium nanoparticles (SeNPs) are environmentally friendly and have promising application prospects. At present, the reduction mechanism of selenite under the complex system is still poorly understood. In order to explore the mechanism of SeNPs synthesis by activated sludge resource utilization, SeNPs were synthesized by activated sludge extracts of domestic sewage (DSeNPs) and coking sewage (CSeNPs), respectively. The synthesis process, zeta potential and morphology size of SeNPs were changed by pH value, extract concentration and extract composition. Under the same synthesis conditions, the morphologies of DSeNPs and CSeNPs were mainly spherical and pseudo-spherical, while CSeNPs also contained pseudo-rod shape particles. The sizes and crystal grains of CSeNPs were smaller than those of DSeNPs. Compared with DSeNPs, a specific protein (~35 kDa) was found on the surface of CSeNPs using SDS-PAGE. By analyzing the fluorescence images of the two SeNPs, it was found that the relative contents of proteins, α-d-glucopyranose polysaccharides, and β-d-glucopyranose polysaccharides on their surfaces were obviously different (P < 0.05). The present study demonstrated that proteins, polysaccharides, humic-like and fulvic acid-like substances cooperated in the formation and stabilization of SeNPs. Furthermore, CSeNPs (bandgap: 1.68 eV) had more desirable photocatalytic performance than DSeNPs (bandgap: 1.84 eV). Under the light condition, CSeNPs could degrade Rhodamine B faster without adding hydrogen peroxide. This experiment provided a new insight into the resource utilization of activated sludge and a reference for the synthesis of nanometer selenium with excellent performance.

A critical review on the treatment of dye-containing wastewater: Ecotoxicological and health concerns of textile dyes and possible remediation approaches for environmental safety

The synthetic dyes used in the textile industry pollute a large amount of water. Textile dyes do not bind tightly to the fabric and are discharged as effluent into the aquatic environment. As a result, the continuous discharge of wastewater from a large number of textile industries without prior treatment has significant negative consequences on the environment and human health. Textile dyes contaminate aquatic habitats and have the potential to be toxic to aquatic organisms, which may enter the food chain. This review will discuss the effects of textile dyes on water bodies, aquatic flora, and human health. Textile dyes degrade the esthetic quality of bodies of water by increasing biochemical and chemical oxygen demand, impairing photosynthesis, inhibiting plant growth, entering the food chain, providing recalcitrance and bioaccumulation, and potentially promoting toxicity, mutagenicity, and carcinogenicity. Therefore, dye-containing wastewater should be effectively treated using eco-friendly technologies to avoid negative effects on the environment, human health, and natural water resources. This review compares the most recent technologies which are commonly used to remove dye from textile wastewater, with a focus on the advantages and drawbacks of these various approaches. This review is expected to spark great interest among the research community who wish to combat the widespread risk of toxic organic pollutants generated by the textile industries.

A systematic review on iron-based nanoparticle-mediated clean-up of textile dyes: challenges and prospects of scale-up technologies

The projected increase of the global textile industry to USD1002.84 billion in 2027 indicates a simultaneous increase in water pollution due to textile dye-rich voluminous effluents highlighting the requirement of source clean-up. This review analyzes the colossal amount of literature on lab-scale nanoremediation technologies involving iron-based nanoparticles and the mechanistic aspects. However, not many studies are in place with regard to execution because there are several bottlenecks in the scale-up of the technology. This review attempts to identify the limitations of scale-up by focusing on each step of nanoremediation from synthesis of iron-based nanoparticles to their applications. The most prominent appears to be the low economic viability of physico-chemical synthesis of nanoparticles, lack of appropriate toxicity studies of iron-based nanoparticles, and dearth of studies on field applications. It is recommended that above studies should be made not only on lab scale but also on field samples preferably utilizing microbial products based green synthesized iron-based nanoparticles and conducting toxicity studies. Besides, immobilization of the nanoparticles on renewable material greatly enhances the sustainability and economic value of the process. Furthermore, since the chemical composition of dye-rich effluents varies among industries, effluent specific optimization of process parameters and kinetics thereof is also a major prerequisite for scale-up. The value of this review lies in the fact that it brings, for the first time, a comprehensive and critical systematization of various aspects needing attention in order to scale-up such effective nanoremediation processes.

Application of Microalgal Stress Responses in Industrial Microalgal Production Systems

Adaptive laboratory evolution (ALE) has been widely utilized as a tool for developing new biological and phenotypic functions to explore strain improvement for microalgal production. Specifically, ALE has been utilized to evolve strains to better adapt to defined conditions. It has become a new solution to improve the performance of strains in microalgae biotechnology. This review mainly summarizes the key results from recent microalgal ALE studies in industrial production. ALE designed for improving cell growth rate, product yield, environmental tolerance and wastewater treatment is discussed to exploit microalgae in various applications. Further development of ALE is proposed, to provide theoretical support for producing the high value-added products from microalgal production.

Rapid and sensitive detection of Rhodamine B in food using the plasmonic silver nanocube-based sensor as SERS active substrate

The use of dye in food is harmful to human health and is prohibited nowadays. However, it is still used because of the benefits, such as cheap prices and abundant resources. Rhodamine B is usually used as the colorant in food such as chili powder, chili oil, etc. It is colorless at very low concentration 10^-7 M. The sensitive detection of RhB at ultra-low concentration help to prevent some risk for human. Surface-enhanced Raman scattering (SERS) is a great technique to detect the analytes at ultra-low concentration and provide the molecule's information as a fingerprint. In this study, silver nano-cube was facilely synthesized by reducing Ag⁺ in ethylene glycol and upgraded to thin-film as a SERS active substrate. RhB was detected at 10^-10 M by a silver nano-cube sensor. The dynamic linear regression between the Raman intensity and RhB concentration over seven orders of magnitude (from 10^-4 to 10^-10 M) was excellent with high reliability (R² = 0.99). Moreover, the substrate can be used after storing in a dark area for 60 days. This proposed nano-cube silver could serve as a potential substrate for detecting RhB in food at very low concentration.

Studies on Zero-cost algae based phytoremediation of dye and heavy metal from simulated wastewater

In the present study, filamentous algae, an emerging candidate for biofuel and other useful chemical production, has been investigated as a biological adsorbent for the removal of contaminants from synthetic wastewater. Operational parameters were optimized in batch phytoremediation experiments. The adsorption equilibrium isotherm models such as Langmuir, Freundlich, and Dubinin-Radushkevitch and kinetics models such as pseudo-1st and pseudo-2nd order in methylene blue decolorization and Cr(VI) removal were also investigated. The D-R isotherm theory provided the best fit. The pseudo-2nd order model accurately described the adsorption kinetic data. Maximum adsorption capacities were observed to 5.03 mg.g^-1 and 0.77 mg.g^-1 along with removal efficiencies were achieved to 91.3% and 91.4% for methylene blue and Cr(VI) remediation, respectively. Moreover, intra-particle diffusion kinetic theory was used to describe the mechanism. These outcomes are significant in the development of algae-based zero-cost pollutants removal technology in wastewater treatment.

Using different cultivation strategies and methods for the production of microalgal biomass as a raw material for the generation of bioproducts

Microalgal biomass and its fine chemical production from microalgae have pioneered algal bioprocess technology with few limitations such as lab-to-industry. However, laboratory-scale transitions and industrial applications are hindered by a plethora of limitations comprising expensive in culturing methods. Therefore, to emphasize the profitable benefits, the algal culturing techniques appropriately employed for large-scale microalgal biomass yield necessitates intricate assessment to emphasize the profitable benefits. The present review holistically compiles the culturing strategies for improving microalgal biomass production based on appropriate factors like designing better bioreactor designs. On the other hand, synthetic biology approaches for abridging the effective industrial transition success explored recently. Prospects in synthetic biology for enhanced microalgal biomass production based on cultivation strategies and various mechanistic modes approach to enrich cost-effective and viable output are discussed. The State-of-the-art culturing techniques encompassing enhancement of photosynthetic activity, designing bioreactor design, and potential augmenting protocols for biomass yield employing indoor cultivation in both (Open and or/closed) methods are enumerated. Further, limitations hindering the microalgal bioproducts development are critically evaluated for improving culturing techniques for microalgal cell factories, subsequently escalating the cost-benefit ratio in bioproducts synthesis from microalgae. The comprehensive analysis could provide a rational and deeper detailed insight for microalgal entrepreneurs through alternative culturing technology viz., synthetic biology and genome engineering in an Industrial perspective arena.

Microalgae and bio-polymeric adsorbents: an integrative approach giving new directions to wastewater treatment

This review analyses the account of biological (microalgae) and synthetic (bio-polymeric adsorbents) elements to compass the treatment efficiencies of various water pollutants and mechanisms behind them. While considering pollutant removal, both techniques have their own merits and demerits. Microalgal-based methods have been dominantly used as a biological method for pollutant removal. The main limitations of microalgal methods are capacity, scale, dependence on variables of environment and duration of the process. Biopolymers on the other hand are naturally produced, abundant in nature, environmentally safe and biocompatible with cells and many times biodegradable. Algal immobilization in biopolymers has promoted the reuse of cells for further treatment and protected cells from toxic environment monitoring and controlling the external factors like pH, temperature and salinity can promote the removal process while working with the mentioned technologies. In this review, a mechanistic view of both these techniques along with integrated approaches emphasizing on their loopholes and possibilities of improvement in these techniques is represented. In addition to these, the review also discusses the post-treatment effect on algal cells which are specifically dependent on pollutant type and their concentration. All these insights will aid in developing integrated solutions to improve removal efficiencies in an environmentally safe and cost-effective manner.Novelty statement The main objective of this review is to thoroughly understand the role of micro-algal cells and synthetic adsorbents individually as well as their integrative effect in the removal of pollutants from wastewater. Many reviews have been published containing information related to either removal mechanism by algae or synthetic adsorbents. While in this review we have discussed the agents, algae and synthetic adsorbents along with their limitations and explained how these limitations can be overcome with the integration of both the moieties together in process of immobilization. We have covered both the analytical and mechanistic parts of these technologies. Along with this, the post-treatment effects on algae have been discussed which can give us a critical understanding of algal response to pollutants and by-products obtained after treatment. This review contains three different sections, their importance and also explained how these technologies can be improved in the future aspects.

Efficient Rice-Husk-Derived Silica Nanocatalysts for Organic Dye Removal from Water

Rice is the second most extensively consumed food ingredient, and its by-products in the paddy field include rice husk and straw. Rice husk ash, resulting from rice husk burning, is considered an environment menace, inducing negative effects on the area in which it is disposed of. In this study, rice husk was applied as a silicate source to obtain mesoporous silica material. Characterization techniques confirmed the well-ordered mesophase and resemblance of mesoporous silica resulting from rice husk ash with one obtained from conventional silica sources. The mesoporous silica material was further used as catalyst support. The resulting catalysts were used for rhodamine 110 oxidation, proving high potential for oxidizing hazardous organic compounds, such as dyes from water, resulting in environmentally harmless products.

Phycoremediation of Synthetic Dyes: An Effective and Eco-Friendly Algal Technology for the Dye Abatement

Rapid industrialization leads to serious environmental hazards due to the increase in the release of pollutants into the environment. Industries that use synthetic dyes for different applications are a predominant source for dye contaminants by releasing the dye in wastewater with pretreatment or without treatment directly into the water bodies, making serious water pollution in the environment. Therefore, it is imperative to safeguard the environment from such contaminants and their associated negative impacts. The conventional treatment method that is used to treat dye-contaminated wastewater is generally costly and has a possibility to produce secondary metabolites. Due to the above problems, the biological method is preferable to treat effluent or dye-contaminated wastewater. Phycoremediation is an algae-based eco-friendly dye abatement technique from contaminated environments. This review highlights the phycoremediation of dyes and its underlying mechanisms along with the information on synthetic dyes, classification, hazardous effects, and other major techniques of dye abatement. This review provides a comprehensive insight into several influencing factors such as pH, temperature, contact time, the dose of algae biomass, and agitation speed, as well as functional groups involved in the phycoremediation process.

Metal-organic framework MIL-100(Fe) for dye removal in aqueous solutions: Prediction by artificial neural network and response surface methodology modeling

In this study, a metal organic framework MIL-100(Fe) was synthesized for rhodamine B (RB) removal from aqueous solutions. An experimental design was conducted using a central composite design (CCD) method to obtain the RB adsorption data (n = 30) from batch experiments. In the CCD approach, solution pH, adsorbent dose, and initial RB concentration were included as input variables, whereas RB removal rate was employed as an output variable. Response surface methodology (RSM) and artificial neural network (ANN) modeling were performed using the adsorption data. In RSM modeling, the cubic regression model was developed, which was adequate to describe the RB adsorption according to analysis of variance. Meanwhile, the ANN model with the topology of 3:8:1 (three input variables, eight neurons in one hidden layer, and one output variable) was developed. In order to further compare the performance between the RSM and ANN models, additional adsorption data (n = 8) were produced under experimental conditions, which were randomly selected in the range of the input variables employed in the CCD matrix. The analysis showed that the ANN model (R² = 0.821) had better predictability than the RSM model (R² = 0.733) for the RB removal rate. Based on the ANN model, the optimum RB removal rate (>99.9%) was predicted at pH 5.3, adsorbent dose 2.0 g L^-1, and initial RB concentration 73 mg L^-1. In addition, pH was determined to be the most important input variable affecting the RB removal rate. This study demonstrated that the ANN model could be successfully employed to model and optimize RB adsorption to the MIL-100(Fe).

Immobilized Nano-TiO2 Photocatalysts for the Degradation of Three Organic Dyes in Single and Multi-Dye Solutions

Heterogeneous photocatalysis with titanium dioxide (TiO2) is considered one of the most promising Advanced Oxidation Processes (AOPs). In order to solve issues related to catalyst recovery and possible agglomeration, which are typical of catalysts in nanoparticle form, self-organized nanotubular TiO2 films directly immobilized on a metal substrate can be produced through anodization. In this study, a nanotubular anodic oxide was tested in the degradation of three organic dyes, namely Direct Red 80, Methylene Blue, and Rhodamine B, in single, binary, and ternary mixtures, to simulate industrial effluents with the co-presence of multiple dyes. To better understand the dyes’ behavior and possible interaction effects, spectrophotometry was used to analyze the degradation of each dye in the mixture. The zero-crossing first-order derivative approach and double divisor ratio spectra derivative method were used for the analysis of binary and ternary mixtures, respectively, to overcome quantification problems due to spectra overlapping. The photocatalytic system demonstrated good efficiency, supporting the use of nanotubular TiO2 as a photocatalyst for dye mixtures. Moreover, the interaction among dyes can actually affect, both positively and negatively, photodegradation kinetics, posing an issue in understanding the actual efficiency of the purification process as a function of the effluent composition.

Synthesis and characterization of BiVO4 nanoparticles for environmental applications

In the present study, a chemical precipitation method is adopted to synthesize bismuth vanadate nanoparticles. The calcination temperature dependent photocatalytic and antibacterial activities of BiVO₄ nanoparticles are examined. The structural analysis evidences the monoclinic phase of BiVO₄ nanoparticles, where the grain size increases with calcination temperature. Interestingly, BiVO₄ nanoparticles calcined at 400 °C exhibit superior photocatalytic behaviour against methylene blue dye (K = 0.02169 min⁻¹) under natural solar irradiation, which exhibits good stability for up to three cycles. The evolution of antibacterial activity studies using a well diffusion assay suggest that the BiVO₄ nanoparticles calcined at 400 °C can act as an effective growth inhibitor of pathogenic Gram-negative (P. aeruginosa & A. baumannii) and Gram-positive bacteria (S. aureus).

In the present study, a chemical precipitation method is adopted to synthesize bismuth vanadate nanoparticles.

Phase control synthesis of α, β and α/β Bi2O3 hetero-junction with enhanced and synergistic photocatalytic activity on degradation of toxic dye, Rhodamine-B under natural sunlight

Nano particles of a few α/β Bi₂O₃ hetero-junctions of various compositions synthesized by one- pot hydrothermal method, exhibit exceptional and synergistic photo-catalytic activity for the degradation of Rhodamine-B in aqueous solution under natural sunlight. Pure α and pure β Bi₂O₃ are also synthesized by control post heating of synthesized hetero-junction. The nano-materials were characterized by diffraction (XRD), microscopic and spectroscopic techniques. The XRD reveals α-β phase hetero-junctions of Bi₂O₃ are made of α-Bi₂O₃ and β-Bi₂O₃ with average dimensions within 13-113 and 5-71 nm respectively and having band gap range of 2.4- 2.9 eV. The spectrophotometrically determined % degradation of the dye and associated rate constant on the best hetero-junction are increased by 4.5(/2.1) and 3.3(/1.2) times than these on pure α (/β). The effects of operational parameters and trapping agents have been analyzed. The maximum removal of the dye was achieved up to 99.6% in 3 h using 0.5 g/L photo-catalyst at pH 3. The reusability test shows that the photo-catalytic activity is retained excellently due to change in chemical nature of the catalyst from α -Bi₂O₃ to β-Bi₂O_3, Bi₂O₂CO₃ and BiOCl. A suitable mechanism is proposed.

Regenerable, innovative porous silicon-based polymer-derived ceramics for removal of methylene blue and rhodamine B from textile and environmental waters

The presence of residual color in treated textile wastewater above the regulation limits is still a critical issue in many textile districts. Innovative, polymer-derived ceramics of the Si-C-O system were here synthesized in order to obtain porous nanocomposite materials where a free carbon phase is dispersed into a silicon carbide/silicon oxycarbide network. The sorbents were comprehensively characterized for the removal of two model water-soluble dyes (i.e., the cation methylene blue and the zwitterion rhodamine B). Adsorption is very rapid and controlled by intra-particle and/or film diffusion, depending on dye concentration. Among the nanocomposites studied, the SiOC aerogel (total capacity about 45 mg/g, is easily regenerated under mild treatment (250 °C, 2 h). Adsorption of dyes is not affected by the matrix composition: removals of 150 mg/L methylene blue from river water and simulated textile wastewater with high content of metal ions (2-50 mg/L) and chemical oxygen demand (800 mg/L) were higher than 92% and quantitative for a dye concentration of 1 mg/L.

Effect of a pH-controlled co-precipitation process on rhodamine B adsorption of MnFe2O4 nanoparticles

We investigated the effect of a pH-controlled co-precipitation process on the adsorption behavior of manganese ferrite (MnFe₂O₄) nanoparticles as well as their structural and magnetic properties. The pH of prepared MnFe₂O₄ nanoparticles is typically an important factor affecting the adsorption capacity of an adsorbent. In this study, MnFe₂O₄ nanoparticles were prepared using a co-precipitation method at four different pH values of 9.0, 9.5, 10.0, and 10.5. The adsorption behaviors on rhodamine B (RhB) by MnFe₂O₄ nanoparticles prepared at different pH values were investigated. It was found that, via a pH-controlled process, MnFe₂O₄ nanoparticles prepared at pH 10.5 showed the highest RhB removal efficiency. The results indicated that the large pore size and surface charge of MnFe₂O₄ nanoparticles improved the adsorption capacities for RhB. Kinetic data were fitted to a pseudo-second order kinetic model and revealed that equilibrium was reached within 60 min. The isotherm data showed that the Langmuir maximum adsorption capacity of the MnFe₂O₄ nanoparticles prepared at pH 10.5 for RhB was 9.30 mg g⁻¹.

The MnFe₂O₄-pH 10.5 sample exhibited high adsorption capacity towards rhodamine B (RhB) solution. The high adsorption capacity towards RhB can be attributed to the large pore size and negative surface charge of MnFe₂O₄ nanoparticles.